Premix Thermoplastics PRE-ELEC® PPE 1461 (discontinued **) price 1922 per MT

Physical Properties
Density
1.15 g/cc
Linear Mold Shrinkage
0.0040 - 0.0060 cm/cm
Melt Flow
2.0 g/10 min @Load 5.00 kg, Temperature 240 °C
High Load Melt Index
10 g/10 min @Load 21.6 kg, Temperature 240 °C

Mechanical Properties
Hardness, Shore D
85
Film Tensile Strength at Yield, MD
40.0 MPa
Film Tensile Strength at Yield, TD
36.0 MPa
Film Elongation at Break, MD
40 %
Film Elongation at Break, TD
35 %
Film Elongation at Yield, MD
4.0 %
Film Elongation at Yield, TD
4.0 %
Modulus of Elasticity
2.50 GPa
Izod Impact, Notched
0.320 J/cm @Thickness 4.00 mm, Temperature -20.0 °C
Izod Impact, Notched
0.750 J/cm @Thickness 4.00 mm, Temperature 23.0 °C
Izod Impact, Unnotched
5.00 J/cm @Thickness 4.00 mm, Temperature -20.0 °C
Izod Impact, Unnotched
5.00 J/cm @Thickness 4.00 mm, Temperature 23.0 °C
Film Tensile Strength at Break, MD
37.0 MPa
Film Tensile Strength at Break, TD
34.0 MPa

Thermal Properties
Deflection Temperature at 0.46 MPa (66 psi)
93.0 °C
Deflection Temperature at 1.8 MPa (264 psi)
76.0 °C
Vicat Softening Point
108 °C
Vicat Softening Point
114 °C

Electrical Properties
Volume Resistivity
<= 1000 ohm-cm
Surface Resistance
<= 10000 ohm

Processing Properties
Middle Barrel Temperature
250 °C
Middle Barrel Temperature
250 °C
Middle Barrel Temperature
260 °C
Middle Barrel Temperature
260 °C
Middle Barrel Temperature
265 °C
Middle Barrel Temperature
265 °C
Die Temperature
240 °C
Die Temperature
260 °C
Die Temperature
260 °C
Die Temperature
260 °C
Die Temperature
260 °C
Roll Temperature
60.0 °C
Roll Temperature
80.0 °C
Roll Temperature
90.0 °C
Drying Temperature
100 - 110 °C @Time 7200 - 14400 sec
Moisture Content
<= 0.15 %
Shelf Life
12.0 Month

Descriptive Properties
Appearance
Granule
Bending Strength, cycles, min
30
Bending Strength, cycles, min
400
Color
Black

Alternative products

Premix Thermoplastics PRE-ELEC® PET 1451 accurate 27%

$ 1744/MT

Density: 1.33 g/cc
Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
Melt Flow: 4.0 g/10 min @Load 5.00 kg, Temperature 200 °C
High Load Melt Index: 28 g/10 min @Load 21.6 kg, Temperature 200 °C
Film Tensile Strength at Yield, MD: 32.0 MPa

Premix Thermoplastics PRE-ELEC® PP 1380 accurate 18%

$ 1769/MT

Density: 1.06 g/cc
Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
Melt Flow: 1.5 g/10 min @Load 5.00 kg, Temperature 230 °C
Hardness, Shore D: 72
Tensile Strength, Ultimate: 26.0 MPa

Premix Thermoplastics PRE-ELEC® PS 1326 accurate 27%

$ 1686/MT

Density: 1.08 g/cc
Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
Melt Flow: 1.2 g/10 min @Load 5.00 kg, Temperature 200 °C
High Load Melt Index: 45 g/10 min @Load 21.6 kg, Temperature 200 °C
Hardness, Shore A: 99

Premix Thermoplastics PRE-ELEC® ESD 7200 accurate 21%

$ 1453/MT

Density: 1.12 g/cc
Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
Hardness, Shore D: 73 @Thickness 3.00 mm
Tensile Strength, Ultimate: 33.0 MPa
Tensile Strength, Yield: 37.0 MPa

Premix Thermoplastics PRE-ELEC® ESD 7100 accurate 21%

$ 1451/MT

Density: 1.07 g/cc
Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
Melt Flow: 5.0 g/10 min @Load 5.00 kg, Temperature 200 °C
High Load Melt Index: 20 g/10 min @Load 21.6 kg, Temperature 200 °C
Hardness, Shore D: 73 @Thickness 1.00 mm

Premix Thermoplastics PRE-ELEC® PP 1373 accurate 21%

$ 1493/MT

Density: 1.09 g/cc
Linear Mold Shrinkage: 0.0080 - 0.012 cm/cm
Melt Flow: 0.30 g/10 min @Load 2.16 kg, Temperature 230 °C
Melt Flow: 4.0 g/10 min @Load 5.00 kg, Temperature 230 °C
Hardness, Shore A: 100

Premix Thermoplastics PRE-ELEC® ESD 7120 accurate 21%

$ 1756/MT

Density: 1.07 g/cc
Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
Melt Flow: 7.0 g/10 min @Load 5.00 kg, Temperature 200 °C
Hardness, Shore D: 73
Tensile Strength, Ultimate: 23.0 MPa

Premix Thermoplastics PRE-ELEC® PC 1431 accurate 46%

$ 1581/MT

Density: 1.24 g/cc
Thickness: 406 microns
Linear Mold Shrinkage: <= 0.0060 cm/cm
Melt Flow: 1.0 g/10 min @Load 1.20 kg, Temperature 300 °C
Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 300 °C

Premix Thermoplastics PRE-ELEC® PP 1378 accurate 18%

$ 1902/MT

Density: 1.17 g/cc
Linear Mold Shrinkage: 0.0030 - 0.0050 cm/cm
Melt Flow: 0.20 g/10 min @Load 2.16 kg, Temperature 230 °C
Melt Flow: 2.0 g/10 min @Load 5.00 kg, Temperature 230 °C
Hardness, Shore D: 83

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, cargo ship for sale in turkey. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for Premix Thermoplastics PRE-ELEC® PPE 1461 (discontinued **)

Seller from New York – 2021-05-11:

Seller from New York work with company: 3M, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1922 per MT

Seller from Seoul – 2021-03-23:

Seller from Seoul work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2397 per MT

Seller from Los Angeles – 2021-05-14:

Seller from Los Angeles work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2212 per MT