Quadrant EPP Duratron® PAI T4501 Polyamide-imide, compression molded bearing grade (ASTM Product Data Sheet) price 1639 per MT

Physical Properties
Specific Gravity
1.45 g/cc
Water Absorption
0.30 %
Water Absorption at Saturation
1.5 %

Mechanical Properties
Hardness, Rockwell E
70
Hardness, Rockwell M
106
Hardness, Shore D
90
Tensile Strength
68.9 MPa
Elongation at Break
3.0 %
Tensile Modulus
3.03 GPa
Flexural Strength
138 MPa
Flexural Modulus
4.48 GPa
Compressive Strength
110 MPa
Compressive Modulus
2.48 GPa
Izod Impact, Notched
0.267 J/cm
Coefficient of Friction, Dynamic
0.20
K (wear) Factor
302 x 10 mm³/N-M
Limiting Pressure Velocity
0.788 MPa-m/sec

Thermal Properties
CTE, linear
36.0 µm/m-°C @Temperature -40.0 - 149 °C
Thermal Conductivity
0.533 W/m-K
Maximum Service Temperature, Air
260 °C
Deflection Temperature at 1.8 MPa (264 psi)
279 °C
Glass Transition Temp, Tg
275 °C
Flammability, UL94
V-0

Electrical Properties
Surface Resistivity per Square
>= 1.00e+13 ohm
Dielectric Constant
6.0 @Frequency 1e+6 Hz
Dissipation Factor
0.042 @Frequency 1e+6 Hz

Compliance Properties
3A-Dairy
No
Canada AG
No
FDA
No
NSF
No
USDA
No
USP Class VI
No

Chemical Resistance Properties
Acids, Strong (pH 1-3)
Limited
Acids, Weak
Acceptable
Alcohols
Acceptable
Alkalies, Strong (pH 11-14)
Unacceptable
Alkalies, Weak
Limited
Chlorinated Solvents
Acceptable
Conductive / Static Dissipative
No
Continuous Sunlight
Acceptable
Hot Water / Steam
Limited
Hydrocarbons - Aliphatic
Acceptable
Hydrocarbons - Aromatic
Acceptable
Inorganic Salt Solutions
Acceptable
Ketones, Esters
Acceptable

Descriptive Properties
Machinability
6

Alternative products

ChevronTexaco Texatherm® accurate 74%

$ 1472/MT

Specific Gravity: 0.6215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

SABIC Innovative Plastics NORYL GFN1 PPE+PS accurate 74%

$ 2026/MT

Specific Gravity: 1.13 g/cc
Water Absorption: 0.060 % @Time 86400 sec
Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Thickness 3.20 mm
Melt Flow: 16.6 g/10 min @Load 5.00 kg, Temperature 300 °C
Melt Index of Compound: 16 g/10 min @Load 5.00 kg, Temperature 300 °C

Quadrant EPP Duratron® PI D7000 PI Unfilled Polyimide (ASTM Product Data Sheet) accurate 74%

$ 1704/MT

Specific Gravity: 1.37 g/cc
Water Absorption: 0.70 %
Water Absorption at Saturation: 3.8 %
Hardness, Rockwell R: 128
Hardness, Shore D: 90

SABIC Innovative Plastics LNP LUBRICOMP WBL36L PBT (Asia Pacific) accurate 82%

$ 1612/MT

Density: 1.69 g/cc
Density: 1.69 g/cc
Moisture Absorption: 0.0400 %
Linear Mold Shrinkage, Flow: 0.024 cm/cm
Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec

Celanese FORTRON 214 PPS (Unverified Data**) accurate 82%

$ 2311/MT

Specific Gravity: 1.35 g/cc
Specific Gravity: 1.36 g/cc
Density: 1.35 g/cc
Density: 1.35 g/cc
Density of Compound: 1.15 g/cc

Solvay Specialty Polymers KetaSpire® KT-820 SL30 Polyetheretherketone (PEEK) (Unverified Data**) accurate 74%

$ 2187/MT

Specific Gravity: 1.45 g/cc
Water Absorption: 0.14 % @Time 86400 sec
Viscosity: 270000 cP @Shear Rate 1000 1/s, Temperature 400 °C
Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.18 mm
Linear Mold Shrinkage, Transverse: 0.015 - 0.017 cm/cm @Thickness 3.18 mm

SABIC Innovative Plastics Valox® K4530 PBT accurate 74%

$ 1502/MT

Specific Gravity: 1.41 g/cc
Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
Linear Mold Shrinkage, Transverse: 0.010 - 0.012 cm/cm @Thickness 3.20 mm
Tensile Strength at Break: 82.0 MPa
Tensile Strength at Break: 89.0 MPa

Quadrant EPP Duratron® PAI T4540 Polyamide-imide, compression molded (ASTM Product Data Sheet) accurate 74%

$ 1485/MT

Specific Gravity: 1.46 g/cc
Water Absorption: 0.30 %
Water Absorption at Saturation: 1.5 %
Hardness, Rockwell E: 66
Hardness, Rockwell M: 107

SABIC Innovative Plastics Valox® K4530 PBT (Europe-Africa-Middle East) accurate 91%

$ 1587/MT

Specific Gravity: 1.41 g/cc
Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
Linear Mold Shrinkage, Transverse: 0.010 - 0.012 cm/cm @Thickness 3.20 mm
Melt Index of Compound: 17 g/10 min @Load 2.16 kg, Temperature 250 °C
Tensile Strength at Break: 82.0 MPa

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, sales ship. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for Quadrant EPP Duratron® PAI T4501 Polyamide-imide, compression molded bearing grade (ASTM Product Data Sheet)

Seller from Lahore – 2021-05-15:

Seller from Lahore work with company: Solvay, SABIC Innovative Plastics (GE Plastics), BASF, ALIMEX GmbH

Price: $1798 per MT

Seller from Tianjin – 2021-04-27:

Seller from Tianjin work with company: 3M, Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics)

Price: $2558 per MT

Seller from Brasília – 2021-03-02:

Seller from Brasília work with company: 3M, Solvay, Techmer ES, SABIC Innovative Plastics (GE Plastics)

Price: $1639 per MT