Quadrant EPP Duratron® PAI T4540 Polyamide-imide, compression molded (ASTM Product Data Sheet) price 1485 per MT

Physical Properties
Specific Gravity
1.46 g/cc
Water Absorption
0.30 %
Water Absorption at Saturation
1.5 %

Mechanical Properties
Hardness, Rockwell E
66
Hardness, Rockwell M
107
Hardness, Shore D
90
Tensile Strength
62.1 MPa
Elongation at Break
3.0 %
Tensile Modulus
3.96 GPa
Flexural Strength
82.7 MPa
Flexural Modulus
3.79 GPa
Compressive Strength
138 MPa
Compressive Modulus
2.41 GPa
Izod Impact, Notched
0.587 J/cm
Coefficient of Friction, Dynamic
0.20
K (wear) Factor
635 x 10 mm³/N-M
Limiting Pressure Velocity
0.263 MPa-m/sec

Thermal Properties
CTE, linear
36.0 µm/m-°C @Temperature -40.0 - 149 °C
Thermal Conductivity
0.405 W/m-K
Maximum Service Temperature, Air
260 °C
Deflection Temperature at 1.8 MPa (264 psi)
279 °C
Glass Transition Temp, Tg
275 °C
Flammability, UL94
V-0

Electrical Properties
Surface Resistivity per Square
>= 1.00e+13 ohm

Compliance Properties
3A-Dairy
No
Canada AG
No
FDA
No
NSF
No
USDA
No
USP Class VI
No

Chemical Resistance Properties
Acids, Strong (pH 1-3)
Limited
Acids, Weak
Acceptable
Alcohols
Acceptable
Alkalies, Strong (pH 11-14)
Unacceptable
Alkalies, Weak
Limited
Chlorinated Solvents
Acceptable
Conductive / Static Dissipative
No
Continuous Sunlight
Acceptable
Hot Water / Steam
Limited
Hydrocarbons - Aliphatic
Acceptable
Hydrocarbons - Aromatic
Acceptable
Inorganic Salt Solutions
Acceptable
Ketones, Esters
Acceptable

Descriptive Properties
Machinability
6

Alternative products

ChevronTexaco Texatherm® accurate 81%

$ 1472/MT

Specific Gravity: 0.6215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

SABIC Innovative Plastics NORYL GFN1 PPE+PS accurate 81%

$ 2026/MT

Specific Gravity: 1.13 g/cc
Water Absorption: 0.060 % @Time 86400 sec
Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Thickness 3.20 mm
Melt Flow: 16.6 g/10 min @Load 5.00 kg, Temperature 300 °C
Melt Index of Compound: 16 g/10 min @Load 5.00 kg, Temperature 300 °C

SABIC Innovative Plastics LNP LUBRICOMP WBL36L PBT (Asia Pacific) accurate 90%

$ 1612/MT

Density: 1.69 g/cc
Density: 1.69 g/cc
Moisture Absorption: 0.0400 %
Linear Mold Shrinkage, Flow: 0.024 cm/cm
Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec

ACC QM 2125 QSI Quantum Silicones 25 Durometer Condensation Cure Moldmaking Material accurate 72%

$ 1692/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc
Specific Gravity: 1.13 g/cc

Quadrant EPP Duratron® PAI T4501 Polyamide-imide, compression molded bearing grade (ASTM Product Data Sheet) accurate 81%

$ 1639/MT

Specific Gravity: 1.45 g/cc
Water Absorption: 0.30 %
Water Absorption at Saturation: 1.5 %
Hardness, Rockwell E: 70
Hardness, Rockwell M: 106

Celanese FORTRON 214 PPS (Unverified Data**) accurate 90%

$ 2311/MT

Specific Gravity: 1.35 g/cc
Specific Gravity: 1.36 g/cc
Density: 1.35 g/cc
Density: 1.35 g/cc
Density of Compound: 1.15 g/cc

ChevronTexaco 22 Heat Transfer Oil accurate 72%

$ 2024/MT

Specific Gravity: 0.6083 g/cc
Specific Gravity: 0.655 g/cc
Specific Gravity: 0.6916 g/cc
Specific Gravity: 0.729 g/cc
Specific Gravity: 0.7658 g/cc

SABIC Innovative Plastics Valox® K4530 PBT (Europe-Africa-Middle East) accurate 81%

$ 1587/MT

Specific Gravity: 1.41 g/cc
Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
Linear Mold Shrinkage, Transverse: 0.010 - 0.012 cm/cm @Thickness 3.20 mm
Melt Index of Compound: 17 g/10 min @Load 2.16 kg, Temperature 250 °C
Tensile Strength at Break: 82.0 MPa

Celanese FORTRON 214 PPS, Unfilled accurate 72%

$ 2385/MT

Specific Gravity: 1.35 g/cc
Density: 0.000782 g/cc
Density: 1.35 g/cc
Density of Compound: 1.15 g/cc
Water Absorption: 0.0300 % @Temperature 22.8 °C

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, lng tanker price. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

2 prices for Quadrant EPP Duratron® PAI T4540 Polyamide-imide, compression molded (ASTM Product Data Sheet)

Seller from Cairo – 2021-07-21:

Seller from Cairo work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1485 per MT

Seller from Houston – 2021-07-25:

Seller from Houston work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1535 per MT