Raschig Group AMPLA® 2500 melamine-modified polyester price 1645 per MT

Physical Properties
Specific Gravity
1.60 - 1.70 g/cc
Apparent Bulk Density
0.700 - 0.900 g/cc
Water Absorption
<= 0.80 % @Temperature 23.0 °C, Time 86400 sec
Linear Mold Shrinkage
0.0070 - 0.010 cm/cm

Mechanical Properties
Tensile Strength, Yield
30.0 - 50.0 MPa
Tensile Strength, Yield
45.0 - 55.0 MPa
Modulus of Elasticity
4.00 - 6.00 GPa
Modulus of Elasticity
5.00 - 7.00 GPa
Flexural Strength
50.0 - 80.0 MPa
Flexural Strength
90.0 - 110 MPa
Flexural Modulus
5.00 - 7.00 GPa
Flexural Modulus
6.00 - 8.00 GPa
Compressive Strength
150 - 200 MPa
Charpy Impact Unnotched
0.600 - 0.800 J/cm² @Temperature 23.0 °C
Charpy Impact Unnotched
1.00 - 1.40 J/cm² @Temperature 23.0 °C
Charpy Impact, Notched
0.150 - 0.250 J/cm² @Temperature 23.0 °C
Charpy Impact, Notched
0.200 - 0.300 J/cm² @Temperature 23.0 °C

Thermal Properties
CTE, linear, Parallel to Flow
20.0 - 30.0 µm/m-°C @Temperature 50.0 - 100 °C
Thermal Conductivity
0.600 - 0.700 W/m-K
Maximum Service Temperature, Air
140 °C @Time 7.20e+7 sec
Maximum Service Temperature, Air
190 °C @Time <=180000 sec
Deflection Temperature at 1.8 MPa (264 psi)
180 - 200 °C
Deflection Temperature at 8.0 MPa
80.0 - 110 °C
Flammability, UL94
V-0 @Thickness 1.50 mm
Shrinkage
0.20 - 0.40 % @Temperature 110 °C, Time 605000 sec

Electrical Properties
Volume Resistivity
1.00e+13 - 1.00e+14 ohm-cm
Surface Resistance
1.00e+12 - 1.00e+13 ohm
Dielectric Constant
4.0 - 5.0 @Frequency 1.00e+6 Hz
Dielectric Constant
5.0 - 7.0 @Frequency 100 Hz
Dielectric Strength
30.0 - 40.0 kV/mm
Dissipation Factor
0.030 - 0.050 @Frequency 1.00e+6 Hz
Dissipation Factor
0.10 - 0.20 @Frequency 100 Hz
Comparative Tracking Index
600 V

Processing Properties
Shelf Life
6.00 Month @Temperature 15.0 - 25.0 °C

Descriptive Properties
Arc Resistance
4 Stufe
Glow wire ignitability test
825/1
Glow-wire flammability test
960/1
Water Absorption
<50 mg

Alternative products

Raschig Group 2567 AMC accurate 66%

$ 2281/MT

Specific Gravity: 2.00 - 2.20 g/cc
Apparent Bulk Density: 0.700 - 0.850 g/cc
Water Absorption: <= 0.30 % @Temperature 23.0 °C, Time 86400 sec
Linear Mold Shrinkage: 0.0015 - 0.0045 cm/cm
Tensile Strength, Yield: 35.0 - 60.0 MPa

Solvay Specialty Polymers Ixef® 1524 Polyarylamide (PARA), 50% Glass Fiber (Dry) accurate 99%

$ 1761/MT

Density: 1.68 g/cc
Filler Content: 50 %
Water Absorption: 0.30 % @Time 86400 sec
Water Absorption at Saturation: 1.0 %
Water Absorption at Saturation: 1.3 %

Nilit FRIANYL B63 F Raw extruded nylon 6 for injection molding accurate 66%

$ 2425/MT

Density: 1.13 g/cc
Water Absorption: 2.5 - 3.0 %
Water Absorption at Saturation: 8.0 - 9.0 %
Viscosity Measurement: 145
Linear Mold Shrinkage: 0.015 - 0.025 cm/cm

DSM Akulon® K222-KGV4 Nylon 6-20% Glass Reinforced (European and Asian Grade) (Dry) accurate 66%

$ 1783/MT

Density: 1.34 g/cc
Tensile Strength at Break: 80.0 MPa
Elongation at Break: 2.0 %
Tensile Modulus: 6.00 GPa
Charpy Impact Unnotched: 4.00 J/cm² @Temperature -30.0 °C

Solvay Specialty Polymers Amodel® AS-4133 L Polyphthalamide (PPA) (Unverified Data**) accurate 66%

$ 1478/MT

Specific Gravity: 1.45 g/cc
Density: 1.45 g/cc
Filler Content: 33 %
Water Absorption: 0.29 % @Temperature 23.0 °C, Time 86400 sec
Linear Mold Shrinkage, Flow: 0.0050 cm/cm

Celanese RITEFLEX 640A TPC, Unfilled accurate 66%

$ 2533/MT

Specific Gravity: 1.15 g/cc
Density: 0.000657 g/cc
Density: 1.13 g/cc
Water Absorption: 0.500 % @Temperature 22.8 °C
Viscosity: 351100 cP

Raschig Group 5567 DAP Diallyl Phthalate (DAP), Cast, Mineral Filler accurate 66%

$ 1480/MT

Specific Gravity: 1.90 - 2.10 g/cc
Apparent Bulk Density: 0.750 - 0.900 g/cc
Water Absorption: <= 0.200 % @Temperature 23.0 °C, Time 86400 sec
Linear Mold Shrinkage, Flow: 0.00300 - 0.00400 cm/cm
Linear Mold Shrinkage, Flow: 0.00500 - 0.00600 cm/cm

DSM Akulon® K224-G0 Nylon 6-50% Glass Reinforced (European Grade) (Dry) accurate 66%

$ 1809/MT

Density: 1.56 g/cc
Water Absorption: 4.5 %
Moisture Absorption at Equilibrium: 1.4 %
Tensile Strength at Break: 230 MPa
Elongation at Break: 3.0 %

BASF Ultraform® N2640 E4 POM accurate 66%

$ 1547/MT

Density: 1.30 g/cc
Water Absorption: 0.90 %
Moisture Absorption at Equilibrium: 0.20 %
Linear Mold Shrinkage, Flow: 0.018 cm/cm
Linear Mold Shrinkage, Transverse: 0.018 cm/cm

Zell-Metall Engineering Plastics Zellamid 250 (PA6.6) at 50% RH accurate 66%

$ 2158/MT

Density: 1.13 - 1.15 g/cc
Moisture Absorption at Equilibrium: 2.5 - 3.1 %
Water Absorption at Saturation: 8.0 - 9.0 %
Ball Indentation Hardness: 100 MPa
Tensile Strength at Break: 60.0 MPa

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, lng ship for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

6 prices for Raschig Group AMPLA® 2500 melamine-modified polyester

Seller from New York – 2021-06-17:

Seller from New York work with company: 3M, RTP Company, PolyOne Corporation, SABIC Innovative Plastics (GE Plastics)

Price: $2274 per MT

Seller from Belo Horizonte – 2021-03-13:

Seller from Belo Horizonte work with company: Solvay, PolyOne Corporation, SABIC Innovative Plastics (GE Plastics), Lehmann & Voss & Co.

Price: $1645 per MT

Seller from Abidjan – 2021-06-23:

Seller from Abidjan work with company: Solvay, PolyOne Corporation, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1954 per MT

Seller from Hanoi – 2021-05-02:

Seller from Hanoi work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2407 per MT

Seller from Madrid – 2021-06-08:

Seller from Madrid work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2183 per MT

Seller from Rio de Janeiro – 2021-07-05:

Seller from Rio de Janeiro work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2050 per MT