SABIC Innovative Plastics Lexan® 500R PC (Asia Pacific) price 1545 per MT

Physical Properties
Specific Gravity
1.27 g/cc
Density
1.245 g/cc
Water Absorption
0.12 % @Time 86400 sec
Moisture Absorption at Equilibrium
0.31 %
Linear Mold Shrinkage, Flow
0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
Melt Flow
7.5 g/10 min @Load 1.20 kg, Temperature 300 °C

Mechanical Properties
Hardness, Rockwell M
85
Hardness, Rockwell R
124
Tensile Strength at Break
55.0 MPa
Tensile Strength, Yield
66.0 MPa
Elongation at Break
15 %
Elongation at Yield
8.0 %
Flexural Yield Strength
103 MPa
Flexural Modulus
3.44 GPa
Izod Impact, Notched
1.06 J/cm
Izod Impact, Unnotched
21.36 J/cm
Tensile Impact Strength
157 kJ/m²
Dart Drop, Total Energy
101 J
Taber Abrasion, mg/1000 Cycles
11

Thermal Properties
CTE, linear, Parallel to Flow
32.4 µm/m-°C @Temperature -40.0 - 95.0 °C
Specific Heat Capacity
1.21 J/g-°C
Thermal Conductivity
0.200 W/m-K
Deflection Temperature at 0.46 MPa (66 psi)
146 °C @Thickness 6.40 mm
Deflection Temperature at 1.8 MPa (264 psi)
142 °C @Thickness 6.40 mm
Vicat Softening Point
154 °C
UL RTI, Electrical
130 °C
UL RTI, Mechanical with Impact
130 °C
UL RTI, Mechanical without Impact
130 °C
Flammability, UL94
V-0 @Thickness 1.52 mm
Flammability, UL94
5VA @Thickness 3.04 mm
Oxygen Index
36 %

Electrical Properties
Volume Resistivity
>= 1.00e+17 ohm-cm
Dielectric Constant
3.05 @Frequency 1.00e+6 Hz
Dielectric Constant
3.1 @Frequency 50.0 - 60.0 Hz
Dielectric Strength
17.7 kV/mm @Thickness 3.20 mm
Dissipation Factor
0.00080 @Frequency 50.0 - 60.0 Hz
Dissipation Factor
0.0075 @Frequency 1.00e+6 Hz
Arc Resistance
0.00 - 60 sec
Comparative Tracking Index
175 - 250 V
Hot Wire Ignition, HWI
60 - 120 sec
High Amp Arc Ignition, HAI
0.00 - 15 arcs
High Voltage Arc-Tracking Rate, HVTR
>= 150 mm/min

Descriptive Properties
Radiant Panel Listing
YES
Specific Volume
0.8cm^3/g
UV-light, water exposure/immersion
F2

Alternative products

SABIC Innovative Plastics Lexan® 500ECR PC (Asia Pacific) accurate 51%

$ 1731/MT

Specific Gravity: 1.27 g/cc
Density: 1.25 g/cc
Moisture Absorption: 0.130 %
Water Absorption at Saturation: 0.31 %
Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm

SABIC Innovative Plastics Lexan® 500R PC accurate 99%

$ 1446/MT

Specific Gravity: 1.27 g/cc
Density: 1.245 g/cc
Water Absorption: 0.12 % @Time 86400 sec
Moisture Absorption at Equilibrium: 0.31 %
Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm

SABIC Innovative Plastics Lexan® 505R PC (Europe-Africa-Middle East) accurate 51%

$ 1595/MT

Specific Gravity: 1.26 g/cc
Density: 1.25 g/cc
Moisture Absorption: 0.130 %
Water Absorption at Saturation: 0.31 %
Linear Mold Shrinkage, Flow: 0.0020 - 0.0060 cm/cm

SABIC Innovative Plastics Lexan® 503R PC accurate 77%

$ 1811/MT

Specific Gravity: 1.25 g/cc
Density: 1.245 g/cc
Water Absorption: 0.12 % @Time 86400 sec
Moisture Absorption at Equilibrium: 0.31 %
Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm

SABIC Innovative Plastics Lexan® 503 PC (Asia Pacific) accurate 77%

$ 1509/MT

Specific Gravity: 1.25 g/cc
Density: 1.245 g/cc
Water Absorption: 0.12 % @Time 86400 sec
Moisture Absorption at Equilibrium: 0.31 %
Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm

SABIC Innovative Plastics Lexan® 500 PC accurate 99%

$ 1633/MT

Specific Gravity: 1.27 g/cc
Density: 1.245 g/cc
Water Absorption: 0.12 % @Time 86400 sec
Moisture Absorption at Equilibrium: 0.31 %
Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm

SABIC Innovative Plastics Lexan® 500 PC (Asia Pacific) accurate 99%

$ 2286/MT

Specific Gravity: 1.27 g/cc
Density: 1.245 g/cc
Water Absorption: 0.12 % @Time 86400 sec
Moisture Absorption at Equilibrium: 0.31 %
Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm

Westlake Plastics Zelux® 10% GF Polycarbonate 10% Glass Filled accurate 51%

$ 1580/MT

Density: 1.25 g/cc
Water Absorption: 0.12 %
Water Absorption at Saturation: 0.31 %
Hardness, Rockwell M: 85
Hardness, Rockwell R: 124

SABIC Innovative Plastics Lexan® 503 PC accurate 77%

$ 1753/MT

Specific Gravity: 1.25 g/cc
Density: 1.245 g/cc
Water Absorption: 0.12 % @Time 86400 sec
Moisture Absorption at Equilibrium: 0.31 %
Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, container ship for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

4 prices for SABIC Innovative Plastics Lexan® 500R PC (Asia Pacific)

Seller from Yokohama – 2021-06-25:

Seller from Yokohama work with company: 3M, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2278 per MT

Seller from Boston – 2021-07-10:

Seller from Boston work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1870 per MT

Seller from Hanoi – 2021-06-14:

Seller from Hanoi work with company: Solvay, Techmer ES, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1545 per MT

Seller from Ho Chi Minh City – 2021-06-29:

Seller from Ho Chi Minh City work with company: Solvay, PolyOne Corporation, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2181 per MT