Styrolution Luran® 378 P Crystal Clear Transparent SAN price 1455 per MT

Physical Properties
Density
1.08 g/cc
Moisture Absorption at Equilibrium
0.30 %
Linear Mold Shrinkage, Flow
0.0030 - 0.0070 cm/cm
Melt Flow
21.6 g/10 min @Load 10.0 kg, Temperature 220 °C
Melt Flow
24.84 g/10 min @Load 21.6 kg, Temperature 200 °C

Mechanical Properties
Hardness, Rockwell M
85
Ball Indentation Hardness
178 MPa @Load 36.5 kg, Time 30.0 sec
Tensile Strength at Break
75.0 MPa
Elongation at Break
3.5 %
Tensile Modulus
3.80 GPa
Flexural Strength
135 MPa
Izod Impact, Notched (ISO)
2.00 kJ/m²
Charpy Impact Unnotched
1.90 J/cm² @Temperature 23.0 °C
Charpy Impact, Notched
0.200 J/cm² @Temperature 23.0 °C
Tensile Creep Modulus, 1000 hours
2800 MPa @Strain <=0.500 %

Thermal Properties
CTE, linear, Parallel to Flow
70.0 µm/m-°C @Temperature 23.0 - 80.0 °C
Thermal Conductivity
0.170 W/m-K
Maximum Service Temperature, Air
85.0 °C
Deflection Temperature at 0.46 MPa (66 psi)
101 °C
Deflection Temperature at 1.8 MPa (264 psi)
89.0 °C
Vicat Softening Point
107 °C
Flammability, UL94
HB @Thickness 0.800 mm
Flammability, UL94
HB @Thickness 1.60 mm

Optical Properties
Transmission, Visible
90 %

Electrical Properties
Volume Resistivity
1.00e+14 ohm-cm
Surface Resistance
>= 1.00e+15 ohm
Dielectric Constant
2.7 @Frequency 1.00e+6 Hz
Dielectric Constant
3.0 @Frequency 100 Hz
Dielectric Strength
34.0 kV/mm
Dissipation Factor
0.0050 @Frequency 100 Hz
Dissipation Factor
0.0080 @Frequency 1.00e+6 Hz

Processing Properties
Melt Temperature
220 - 260 °C
Mold Temperature
40.0 - 80.0 °C
Drying Temperature
80.0 °C
Dry Time
2 - 4 hour

Descriptive Properties
Color
Transparent 77768
Color
Transparent 77769
Commercial Status
Europe
Primary Processing Technique
Injection Molding

Alternative products

Styrolution Luran® 388 S SAN accurate 74%

$ 1802/MT

Density: 1.08 g/cc
Moisture Absorption at Equilibrium: 0.30 %
Linear Mold Shrinkage, Flow: 0.0030 - 0.0070 cm/cm
Melt Flow: 7.56 g/10 min @Load 10.0 kg, Temperature 220 °C
Melt Flow: 9.72 g/10 min @Load 21.6 kg, Temperature 200 °C

Styrolution Luran® 368 R Crystal Clear Transparent 77851 SAN accurate 74%

$ 1518/MT

Density: 1.08 g/cc
Moisture Absorption at Equilibrium: 0.20 %
Linear Mold Shrinkage, Flow: 0.0030 - 0.0070 cm/cm
Melt Flow: 10.8 g/10 min @Load 10.0 kg, Temperature 220 °C
Melt Flow: 12.96 g/10 min @Load 21.6 kg, Temperature 200 °C

BASF Styrodur® 2800 C Extruded Rigid Polystyrene Foam (Europe) accurate 45%

$ 2010/MT

Density: 0.0300 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 5.0 %
Water Vapor Transmission: 80.0 - 200 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

BASF Styrodur® 4000 CS Extruded Rigid Polystyrene Foam (Europe) accurate 45%

$ 2342/MT

Density: 0.0350 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 80.0 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

BASF Styrodur® 3035 CS Extruded Rigid Polystyrene Foam (Europe) accurate 45%

$ 2271/MT

Density: 0.0330 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 50.0 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

Celanese Celanex® 3116 PBT, 7.5% Glass Reinforced accurate 49%

$ 1468/MT

Specific Gravity: 1.50 g/cc
Density: 1.50 g/cc
Moisture Absorption at Equilibrium: 0.20 %
Linear Mold Shrinkage, Flow: 0.010 - 0.014 cm/cm
Linear Mold Shrinkage, Flow: 0.010 - 0.014 cm/cm

Styrolution Luran® 348 Q Crystal Clear Transparent 77850 SAN accurate 57%

$ 2005/MT

Density: 1.08 g/cc
Moisture Absorption at Equilibrium: 0.20 %
Linear Mold Shrinkage, Flow: 0.0030 - 0.0070 cm/cm
Melt Flow: 20.52 g/10 min @Load 10.0 kg, Temperature 220 °C
Melt Flow: 29.16 g/10 min @Load 21.6 kg, Temperature 200 °C

Styrolution Luran® 348 Q Transparent SAN accurate 57%

$ 1649/MT

Density: 1.08 g/cc
Moisture Absorption at Equilibrium: 0.20 %
Linear Mold Shrinkage, Flow: 0.0030 - 0.0070 cm/cm
Melt Flow: 20.52 g/10 min @Load 10.0 kg, Temperature 220 °C
Melt Flow: 29.16 g/10 min @Load 21.6 kg, Temperature 200 °C

Styrolution Luran® 358 N SAN accurate 49%

$ 1572/MT

Density: 1.08 g/cc
Moisture Absorption at Equilibrium: 0.20 %
Linear Mold Shrinkage: 0.0050 cm/cm
Melt Flow: 22 g/10 min @Load 10.0 kg, Temperature 220 °C
Tensile Strength at Break: 96.0 MPa @Temperature -40.0 °C

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, small cruise ship for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for Styrolution Luran® 378 P Crystal Clear Transparent SAN

Seller from Barcelona – 2021-03-01:

Seller from Barcelona work with company: RTP Company, PolyOne Corporation, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1455 per MT

Seller from Tianjin – 2021-06-11:

Seller from Tianjin work with company: 3M, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1889 per MT

Seller from Montréal – 2021-03-23:

Seller from Montréal work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1615 per MT