Styrolution Styrolux 684D SBC

Seller in Delhi price: $2543 per MT
Seller in Tehran price: $2237 per MT
Seller in Chengdu price: $1605 per MT

Styrolution Styrolux 684D SBC in Polymer, Thermoplastic, Styrene-Butadiene, Styrene-Butadiene Copolymer, SBC

  • Physical Properties
  • Density
  • 1.01 g/cc
  • Water Absorption
  • 0.070 %
  • Moisture Absorption at Equilibrium
  • 0.070 %
  • Moisture Vapor Transmission
  • 2.90 cc-mm/m²-24hr-atm
  • Oxygen Transmission Rate
  • 520 cc/m²/day
  • Linear Mold Shrinkage
  • 0.0065 cm/cm
  • Melt Flow
  • 11 g/10 min @Load 5.00 kg, Temperature 200 °C
  • Melt Flow
  • 11 g/10 min @Load 5.00 kg, Temperature 200 °C

  • Mechanical Properties
  • Hardness, Shore D
  • 68
  • Tensile Strength, Yield
  • 26.0 MPa
  • Tensile Strength, Yield
  • 28.0 MPa
  • Elongation at Break
  • >= 50 %
  • Elongation at Break
  • 250 %
  • Elongation at Break
  • 250 %
  • Elongation at Yield
  • 2.3 %
  • Tensile Modulus
  • 1.31 GPa
  • Tensile Modulus
  • 1.55 GPa
  • Flexural Strength
  • 31.0 MPa
  • Flexural Strength
  • 40.0 MPa
  • Flexural Modulus
  • 1.17 GPa
  • Flexural Modulus
  • 1.70 GPa
  • Secant Modulus, MD
  • 1.32 GPa
  • Secant Modulus, TD
  • 1.18 GPa
  • Izod Impact, Notched
  • 0.430 J/cm @Thickness 3.17 mm
  • Izod Impact, Notched (ISO)
  • 4.00 kJ/m²
  • Charpy Impact Unnotched
  • 10.0 J/cm²
  • Charpy Impact Unnotched
  • 3.00 J/cm² @Temperature -30.0 °C
  • Charpy Impact, Notched
  • 0.400 J/cm²
  • Charpy Impact, Notched
  • 0.300 J/cm² @Temperature -30.0 °C
  • Dart Drop, Total Energy
  • 22.0 J
  • Impact Test
  • 11.0 J
  • Tensile Creep Modulus, 1 hour
  • 1300 MPa
  • Tensile Creep Modulus, 1000 hours
  • 790 MPa
  • Elmendorf Tear Strength MD
  • 253 g
  • Elmendorf Tear Strength TD
  • 237 g
  • Film Tensile Strength at Break, MD
  • 260 MPa
  • Film Tensile Strength at Break, TD
  • 100 MPa

  • Thermal Properties
  • CTE, linear, Parallel to Flow
  • 75.0 µm/m-°C
  • CTE, linear, Transverse to Flow
  • 72.0 µm/m-°C
  • Deflection Temperature at 0.46 MPa (66 psi)
  • 75.0 °C
  • Deflection Temperature at 0.46 MPa (66 psi)
  • 77.0 °C
  • Deflection Temperature at 1.8 MPa (264 psi)
  • 65.0 °C
  • Deflection Temperature at 1.8 MPa (264 psi)
  • 70.0 °C
  • Vicat Softening Point
  • 59.0 °C
  • Vicat Softening Point
  • 86.0 °C
  • Flammability, UL94
  • HB @Thickness 1.57 mm
  • Flammability, UL94
  • HB @Thickness 3.20 mm

  • Optical Properties
  • Refractive Index
  • 1.573
  • Haze
  • 1.5 % @Thickness 3.20 mm
  • Transmission, Visible
  • 90 %

  • Electrical Properties
  • Volume Resistivity
  • >= 1.00e+13 ohm-cm
  • Surface Resistance
  • >= 1.00e+14 ohm
  • Dielectric Constant
  • 2.5 @Frequency 1e+9 Hz
  • Dielectric Constant
  • 2.5 @Frequency 1.00e+6 Hz
  • Dielectric Constant
  • 2.5 @Frequency 100 Hz
  • Dielectric Constant
  • 2.5 @Frequency 1.00e+6 Hz
  • Dielectric Strength
  • 80.0 kV/mm
  • Dissipation Factor
  • 0.00030 @Frequency 1e+9 Hz
  • Dissipation Factor
  • 0.00030 @Frequency 100 Hz
  • Dissipation Factor
  • 0.00080 @Frequency 1.00e+6 Hz
  • Dissipation Factor
  • 0.00080 @Frequency 1.00e+6 Hz
  • Comparative Tracking Index
  • 600 V

  • Processing Properties
  • Melt Temperature
  • 190 - 230 °C
  • Melt Temperature
  • 180 - 250 °C
  • Melt Temperature
  • 230 °C
  • Mold Temperature
  • 30.0 - 50.0 °C
  • Injection Velocity
  • 50.0 mm/sec

  • Descriptive Properties
  • Color
  • Clear
  • Commercial Status
  • Active America
  • FDA
  • Yes
  • Form
  • Yes
  • Impact Modified
  • Yes
  • NSF Std. 51
  • No
  • NSF Std. 61
  • No
  • Primary Processing Technique
  • Extrusion
  • Processing
  • Blow Molding
  • Processing
  • Film Extrusion
  • Processing
  • Injection Molding
  • Processing
  • Other Extrusion
  • Processing
  • Sheet Extrusion
  • UL.UL-C
  • No

Alternative products

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

3 prices for Styrolution Styrolux 684D SBC

Seller from Delhi – 2021-05-03:

Seller from Delhi work with company: 3M, RTP Company, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics)

Price: $2543 per MT

Seller from Tehran – 2021-04-27:

Seller from Tehran work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2237 per MT

Seller from Chengdu – 2021-04-15:

Seller from Chengdu work with company: Solvay, SABIC Innovative Plastics (GE Plastics), BASF, ALIMEX GmbH

Price: $1605 per MT

Share on Pinterest
Share on LinkedIn
Share on Reddit

Would you like to sell Styrolution Styrolux 684D SBC?

Plastic warehouse