Wolf Kunststoff ZEDEX® ZX-530EL3 066 Polymer Alloy, Carbon Fiber Reinforced

Seller in Seoul price: $1719 per MT
Seller in Mumbai price: $1815 per MT
Seller in Lagos price: $2555 per MT
Seller in Nanjing price: $2390 per MT

Wolf Kunststoff ZEDEX® ZX-530EL3 066 Polymer Alloy, Carbon Fiber Reinforced in Polymer, Thermoplastic

  • Physical Properties
  • Density
  • 1.47 g/cc
  • Water Absorption
  • 0.010 % @Temperature 23.0 °C
  • Moisture Absorption at Equilibrium
  • 0.050 %
  • Mechanical Properties
  • Hardness, Shore A
  • >= 100
  • Hardness, Shore D
  • 86
  • Ball Indentation Hardness
  • 157 MPa
  • Tensile Strength at Break
  • 79.0 MPa
  • Tensile Strength
  • 79.0 MPa
  • Tensile Stress
  • 22.0 MPa @Strain 1.00 %, Time 3.60e+6 sec
  • Tensile Strength, Yield
  • 50.6 MPa
  • Elongation at Break
  • 5.0 %
  • Elongation at Break
  • 5.0 %
  • Elongation at Yield
  • 2.1 %
  • Elongation at Yield
  • 3.7 %
  • Elongation at Yield
  • 5.0 %
  • Tensile Modulus
  • 3.94 GPa
  • Flexural Strength
  • 114 MPa
  • Flexural Strength
  • 116 MPa
  • Flexural Strength
  • 116 MPa
  • Flexural Modulus
  • 4.356 GPa
  • Compressive Strength
  • 70.0 MPa
  • Compressive Strength
  • 150 MPa
  • Compressive Strength
  • 150 MPa
  • Compressive Strength
  • 30.0 MPa @Time 3.60e+7 sec
  • Compressive Strength
  • 60.0 MPa @Time 360000 sec
  • Compressive Strength
  • 75.0 MPa @Time 36.0 sec
  • Compressive Strength
  • 46.0 MPa @Strain 3.50 %
  • Compressive Modulus
  • 3.50 GPa
  • Fatigue Strength
  • 41.0 MPa @# of Cycles 1.00e+6
  • K Factor (ISO)
  • 0.50 µm/km @Temperature 100 °C
  • K Factor (ISO)
  • 1.0 µm/km @Temperature 20.0 °C
  • K Factor (ISO)
  • 4.3 µm/km @Temperature 200 °C
  • K Factor (ISO)
  • 7.7 µm/km @Temperature 240 °C
  • Charpy Impact Unnotched
  • 1.30 J/cm²
  • Charpy Impact, Notched
  • 0.550 J/cm²
  • Coefficient of Friction, Dynamic
  • 0.15 @Temperature 100 °C
  • Coefficient of Friction, Dynamic
  • 0.16 @Temperature 20.0 °C
  • Coefficient of Friction, Static
  • 0.18 @Temperature 20.0 °C
  • Tensile Creep Modulus, 1000 hours
  • 2180 MPa
  • Limiting Pressure Velocity
  • 0.06667 MPa-m/sec
  • Limiting Pressure Velocity
  • 0.200 MPa-m/sec
  • Limiting Pressure Velocity
  • 0.430 MPa-m/sec
  • Limiting Pressure Velocity
  • 0.915 MPa-m/sec
  • Compression Set
  • 5.0 %
  • Compression Set
  • 7.2 %
  • Compression Set
  • 30 %
  • Thermal Properties
  • CTE, linear
  • 38.0 µm/m-°C @Temperature <=100 °C
  • CTE, linear
  • 50.0 µm/m-°C @Temperature <=150 °C
  • Specific Heat Capacity
  • 0.840 J/g-°C
  • Melting Point
  • 320 °C
  • Maximum Service Temperature, Air
  • 90.0 °C
  • Maximum Service Temperature, Air
  • 240 °C
  • Maximum Service Temperature, Air
  • 260 °C
  • Deflection Temperature at 1.8 MPa (264 psi)
  • 260 °C
  • Glass Transition Temp, Tg
  • 90.0 °C
  • Flammability, UL94
  • V-0
  • Electrical Properties
  • Volume Resistivity
  • 71000 ohm-cm
  • Surface Resistance
  • 69000 ohm
  • Dielectric Constant
  • 4.3 @Frequency 110 Hz
  • Dielectric Strength
  • 0.100 kV/mm
  • Dissipation Factor
  • 0.025
  • Dissipation Factor
  • 0.064 @Frequency 1.00 Hz
  • Descriptive Properties
  • Alignment Adjustment
  • 2
  • Chemical Sterilization
  • 10
  • Color
  • Grey
  • Creep Resistance
  • 7
  • Dimensional Stability with Thermal Expansion
  • 7
  • Free from Silicon
  • Applicable
  • Gamma-rays Radiation Sterilization
  • 4
  • Injection Molded Parts
  • Applicable
  • Machined Parts
  • Applicable
  • Moist Heat Sterilization
  • 6
  • Plastic Granules
  • Applicable
  • Rate of Desorption
  • 3.12E-07
  • Resistance Against dust, Dirt, Abrasive Substances
  • 6
  • Resistance Against Hot Water
  • 140
  • Resistance to Chemicals
  • 9
  • Resistant Against Disinfectant
  • Applicable
  • Rods up to Øe (de)
  • Applicable
  • Sheets up to Maximum Thickness
  • Applicable
  • Sliding Velocity
  • 100
  • Suitable for Outdoor Use
  • 7
  • Suitable for Use in Water
  • Applicable
  • Suitable for Vacuum
  • Applicable
  • Tubes (hollow rods) up to Øe (de)
  • Applicable
  • UV Rays Resistance
  • 8
  • UV-Sterilization
  • 7

Alternative products

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, cruise ships sales. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

4 prices for Wolf Kunststoff ZEDEX® ZX-530EL3 066 Polymer Alloy, Carbon Fiber Reinforced

Seller from Seoul – 2021-02-27:

Seller from Seoul work with company: Dow Corning, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1719 per MT

Seller from Mumbai – 2021-03-21:

Seller from Mumbai work with company: 3M, Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics)

Price: $1815 per MT

Seller from Lagos – 2021-06-03:

Seller from Lagos work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2555 per MT

Seller from Nanjing – 2021-04-16:

Seller from Nanjing work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2390 per MT

Share on Pinterest
Share on LinkedIn
Share on Reddit

Would you like to sell Wolf Kunststoff ZEDEX® ZX-530EL3 066 Polymer Alloy, Carbon Fiber Reinforced?

Plastic warehouse

Find a direct plastic supplier if you're interested in a supplier or Archery club in Singapore open-nearme.com