$ 1522/MT
- Specific Gravity: 2.40 g/cc
- Viscosity: 1.70e+6 cP
- Deformation: 30 %
- Hardness, Shore A: 75 - 79
- Tensile Strength at Break: 3.10 - 3.45 MPa
$ 1531/MT
- Specific Gravity: 3.45 - 3.95 g/cc
- Hardness, Shore A: 57 - 73
- Tensile Strength at Break: >= 1.21 MPa
- Elongation at Break: >= 75 %
- Compression Set: <= 32 % @Temperature 100 °C, Time 252000 sec
$ 2340/MT
- Specific Gravity: 1.85 - 2.35 g/cc
- Hardness, Shore A: 50 - 70
- Tensile Strength at Break: >= 1.03 MPa
- Elongation at Break: >= 100 %
- Tear Strength: 6.13 kN/m
$ 1445/MT
- Specific Gravity: 3.20 - 3.90 g/cc
- Volatile Organic Compounds (VOC) Content: 117 g/l
- Thickness: >= 178 microns
- Hardness, Shore A: >= 55
- Shear Strength: 1.03 MPa
$ 1875/MT
- Specific Gravity: 0.800 g/cc
- Density: 0.00134 g/cc
- Volatiles: >= 95 %
- Vapor Pressure: 0.125 bar
- Boiling Point: 63.9 °C
$ 2181/MT
- Specific Gravity: 2.30 g/cc
- Thickness: 460 - 560 microns
- Thickness: 900 - 1100 microns
- Thickness: 1620 - 1980 microns
- Thickness: 2250 - 2750 microns
$ 1722/MT
- Specific Gravity: 0.900 - 1.50 g/cc
- Hardness, Shore A: 65 - 75
- Tensile Strength: >= 4.14 MPa
- Elongation at Break: >= 100 %
- Tear Strength: <= 10.5 kN/m
$ 1713/MT
- Specific Gravity: >= 1.00 g/cc
- Copper, Cu: <= 70 %
- Silver, Ag: <= 10 %
- Color: Beige
- Fluorosilicone Proprietary wt. % Max: 40
$ 2230/MT
- Specific Gravity: 1.80 g/cc
- Hardness, Shore A: 50 - 75
- Tensile Strength: >= 3.10 MPa
- Elongation at Break: >= 100 %
- Compression Set: <= 25 % @Temperature 85.0 °C, Time 79200 sec
$ 1532/MT
- Specific Gravity: 1.75 - 2.25 g/cc
- Hardness, Shore A: 55 - 75
- Tensile Strength at Break: >= 1.03 MPa
- Elongation at Break: >= 100 %
- Compression Set: <= 40 % @Temperature 100 °C, Time 252000 sec
$ 1752/MT
- Specific Gravity: 1.90 g/cc
- Volatile Organic Compounds (VOC) Content: 259 g/l
- Shear Strength: >= 0.689 MPa
- Volume Resistivity: <= 0.010 ohm-cm
- Cure Time: 10100 min @Temperature 24.0 °C
$ 1571/MT
- Specific Gravity: 1.80 - 2.00 g/cc
- Volatile Organic Compounds (VOC) Content: 151 g/l
- Thickness: 178 microns
- Shear Strength: >= 0.689 MPa
- Maximum Service Temperature, Air: 200 °C
$ 2282/MT
- Specific Gravity: 1.65 - 2.15 g/cc
- Hardness, Shore A: 45 - 65
- Tensile Strength at Break: >= 1.03 MPa
- Elongation at Break: >= 100 %
- Tear Strength: 6.13 kN/m
$ 2179/MT
- Specific Gravity: 1.45 g/cc
- Thickness: 180 microns
- Hardness, Shore A: 10
- Tensile Strength: 27.6 MPa
- Elongation at Break: 25 %
$ 1466/MT
- Hardness, Shore A: 30 - 40
- Tensile Strength: >= 1.72 MPa
- Elongation at Break: >= 200 %
- Tear Strength: >= 7.89 kN/m
- Compression Set: 20 %
$ 2387/MT
- Specific Gravity: 2.80 g/cc
- Deformation: 26 % @Pressure 0.00689 MPa
- Deformation: 72 % @Pressure 0.0207 MPa
- Deformation: 85 % @Pressure 0.0345 MPa
- Deformation: >= 90 % @Pressure 0.0689 MPa
$ 1641/MT
- Specific Gravity: 1.50 g/cc
- Thickness: 460 - 560 microns
- Thickness: 900 - 1100 microns
- Thickness: 1620 - 1980 microns
- Thickness: 2250 - 2750 microns
$ 1742/MT
- Specific Gravity: 3.80 g/cc
- Volatile Organic Compounds (VOC) Content: 0.00 g/l
- Thickness: 254 microns
- Shear Strength: >= 1.38 MPa
- Volume Resistivity: <= 0.040 ohm-cm
$ 1759/MT
- Specific Gravity: 1.40 g/cc
- Thickness: 10.0 - 100 microns
- Deformation: 7.0 % @Thickness 1.52 mm, Pressure 0.0345 MPa
- Deformation: 11 % @Thickness 1.52 mm, Pressure 0.0689 MPa
- Deformation: 12 % @Thickness 1.52 mm, Pressure 0.172 MPa
$ 1483/MT
- Specific Gravity: 2.10 g/cc
- Hardness, Shore A: 56
- CTE, linear: 150 µm/m-°C
- Specific Heat Capacity: 1.00 J/g-°C
- Thermal Conductivity: 0.900 W/m-K
$ 1541/MT
- Specific Gravity: 2.90 g/cc
- Thickness: 250 - 5000 microns
- Deformation: 22 % @Thickness 3.17 mm, Pressure 0.0345 MPa
- Deformation: 33 % @Thickness 3.17 mm, Pressure 0.0689 MPa
- Deformation: 55 % @Thickness 3.17 mm, Pressure 0.172 MPa
$ 2366/MT
- Specific Gravity: 1.32 - 1.45 g/cc
- Hardness, Shore A: 33 - 47
- Tensile Strength: >= 0.827 MPa
- Elongation at Break: >= 75 %
- Compression Set: <= 25 % @Temperature 100 °C, Time 252000 sec
$ 1954/MT
- Specific Gravity: 3.05 - 3.95 g/cc
- Hardness, Shore A: 58 - 72
- Tensile Strength at Break: >= 2.07 MPa
- Elongation at Break: 200 - 500 %
- Tear Strength: 8.75 kN/m
$ 2213/MT
- Specific Gravity: 1.90 g/cc
- Solubility in Water: 0.00 %
- Flash Point: >= 93.3 °C
- Color: Black
- Diorganotin Compound Proprietary wt. % Max: 5
$ 2548/MT
- Specific Gravity: 3.45 - 3.95 g/cc
- Hardness, Shore A: 73 - 87
- Tensile Strength: >= 1.38 MPa
- Elongation at Break: <= 200 %
- Tear Strength: <= 13.1 kN/m
$ 1548/MT
- Thickness: 254 - 5080 microns
- Flammability, UL94: V-0
- Carrier: Fiberglass no PSA
- Color: Gray
$ 2169/MT
- Specific Gravity: 3.02 g/cc
- Specific Gravity: 2.80 - 3.30 g/cc
- Hardness, Shore A: 26
- Hardness, Shore A: <= 45
- Tensile Strength at Break: >= 0.414 MPa
$ 1904/MT
- Specific Gravity: 2.45 g/cc
- Thickness: 225 - 275 microns
- Outgassing - Total Mass Loss: 0.20 %
- Outgassing - Total Mass Loss: 0.45 %
- Hardness, Shore A: 85
$ 1677/MT
- Hardness, Shore A: 30 - 40
- Tensile Strength: >= 1.72 MPa
- Elongation at Break: >= 200 %
- Tear Strength: >= 7.89 kN/m
- Compression Set: 20 %
$ 2491/MT
- Specific Gravity: 1.60 - 2.10 g/cc
- Specific Gravity: 1.65 - 2.15 g/cc
- Hardness, Shore A: 65
- Tensile Strength at Break: >= 1.38 MPa
- Tensile Strength at Break: 2.41 MPa
$ 1565/MT
- Specific Gravity: 1.75 - 2.25 g/cc
- Volatile Organic Compounds (VOC) Content: 0.00 g/l
- Thickness: >= 254 microns
- Shear Strength: >= 0.689 MPa
- Maximum Service Temperature, Air: 200 °C
$ 2508/MT
- Specific Gravity: 2.65 - 3.15 g/cc
- Hardness, Shore A: 33 - 47
- Tensile Strength: >= 0.552 MPa
- Elongation at Break: >= 75 %
- Compression Set: <= 30 % @Temperature 100 °C, Time 252000 sec
$ 1749/MT
- Specific Gravity: 3.75 - 4.25 g/cc
- Hardness, Shore A: 70 - 80
- Tensile Strength at Break: >= 1.38 MPa
- Elongation at Break: >= 100 %
- Tear Strength: 5.34 kN/m
$ 1505/MT
- Specific Gravity: 1.75 - 2.25 g/cc
- Hardness, Shore A: 55 - 75
- Tensile Strength: >= 1.38 MPa
- Elongation at Break: >= 75 %
- Tear Strength: <= 7.01 kN/m
$ 1840/MT
- Specific Gravity: 3.80 g/cc
- Solubility in Water: 0.00 %
- Flash Point: >= 93.3 °C
- Copper, Cu: 70 - 85 %
- Silver, Ag: 1.0 - 15 %
$ 1520/MT
- Specific Gravity: 2.40 g/cc
- Viscosity: 170000 cP
- Outgassing - Total Mass Loss: 0.17 %
- CTE, linear: 300 µm/m-°C
- Specific Heat Capacity: 1.00 J/g-°C
$ 1690/MT
- Specific Gravity: 1.65 - 2.15 g/cc
- Hardness, Shore A: 68 - 82
- Tensile Strength: >= 1.38 MPa
- Elongation at Break: <= 75 %
- Tear Strength: <= 10.5 kN/m
$ 1554/MT
- Specific Gravity: >= 1.00 g/cc
- Flash Point: >= 93.3 °C
- Calcium Carbonate wt. % Max: 10
- Physical Form: Beige liquid, little or no odor
- Silica, Crystalline Quartz %: <60
- Silicone Resin %: <70
$ 2375/MT
- Specific Gravity: 1.00 g/cc
- Volatiles: <= 7.0 %
- Copper, Cu: <= 65 %
- Silver, Ag: <= 10 %
- Color: Silver/Gray
$ 2043/MT
- Specific Gravity: 2.45 g/cc
- Thickness: 175 - 225 microns
- Hardness, Shore A: 80
- Tensile Strength: 19.3 MPa
- Elongation at Break: 40 %
$ 1940/MT
- Specific Gravity: >= 1.00 g/cc
- Flash Point: >= 93.3 °C
- Color: Blue
- Physical Form: Blue liquid with slight odor.
- Silicone Resin %: >70
- Toluene wt. % Max: 1
$ 1715/MT
- Specific Gravity: 2.20 g/cc
- Thickness: 250 - 5000 microns
- Deformation: 20 % @Thickness 3.17 mm, Pressure 0.0345 MPa
- Deformation: 30 % @Thickness 3.17 mm, Pressure 0.0689 MPa
- Deformation: 50 % @Thickness 3.17 mm, Pressure 0.172 MPa
$ 1731/MT
- Specific Gravity: 1.30 g/cc
- Thickness: 40.0 - 200 microns
- Deformation: 6.0 % @Thickness 1.52 mm, Pressure 0.0345 MPa
- Deformation: 10 % @Thickness 1.52 mm, Pressure 0.0689 MPa
- Deformation: 11 % @Thickness 1.52 mm, Pressure 0.172 MPa
$ 1937/MT
- Specific Gravity: 2.45 g/cc
- Thickness: 435 - 485 microns
- Hardness, Shore A: 80
- Tensile Strength: 13.8 MPa
- Elongation at Break: 40 %
$ 1561/MT
- Specific Gravity: 3.20 - 3.50 g/cc
- Hardness, Shore A: 50 - 60
- Tensile Strength at Break: >= 1.52 MPa
- Elongation at Break: >= 250 %
- Tear Strength: 7.012 kN/m
$ 1886/MT
- Specific Gravity: 3.30 g/cc
- Hardness, Shore A: 55 - 60
- Tensile Strength: >= 2.41 MPa
- Elongation at Break: >= 225 %
- Compression Set: <= 35 % @Temperature 85.0 °C, Time 79200 sec
$ 1534/MT
- Specific Gravity: 1.55 - 2.05 g/cc
- Hardness, Shore A: 50 - 64
- Tensile Strength at Break: >= 0.965 MPa
- Elongation at Break: >= 100 %
- Tear Strength: 6.13 kN/m
$ 1767/MT
- Specific Gravity: >= 1.00 g/cc
- Carbon Black Loading: <= 0.50 %
- Silver Coated Copper wt. % Max: 100
$ 2025/MT
- Specific Gravity: 3.40 g/cc
- Hardness, Shore A: 55
- Tensile Strength at Break: 3.45 MPa
- Elongation at Break: >= 200 %
- Tear Strength: 10.5 kN/m
$ 2134/MT
- Specific Gravity: 2.20 g/cc
- Thickness: 1000 - 5000 microns
- Deformation: 3.0 % @Diameter 12.7 mm, Pressure 0.0345 MPa
- Deformation: 5.0 % @Diameter 12.7 mm, Pressure 0.0689 MPa
- Deformation: 7.0 % @Diameter 12.7 mm, Pressure 0.172 MPa
$ 1532/MT
- Specific Gravity: 1.45 g/cc
- Viscosity: 2.5 cP
- Outgassing - Total Mass Loss: 0.29 %
- Outgassing - Total Mass Loss: 0.39 %
- Hardness, Shore A: 15
$ 1942/MT
- Specific Gravity: 2.65 - 3.35 g/cc
- Thickness: 203 microns
- Shear Strength: >= 3.10 MPa
- Maximum Service Temperature, Air: 125 °C
- Minimum Service Temperature, Air: -55.0 °C
$ 2322/MT
- Specific Gravity: 4.00 - 5.50 g/cc
- Hardness, Shore A: 73 - 87
- Tensile Strength at Break: >= 4.14 MPa
- Elongation at Break: >= 20 %
- Tear Strength: 12.25 kN/m
$ 2233/MT
- Specific Gravity: 1.90 g/cc
- Solubility in Water: 0.00 %
- Flash Point: >= 93.3 °C
- Color: Black
- Diorganotin Compound Proprietary wt. % Max: 5
$ 1462/MT
- Shielding Effectiveness: >= 40 dB @Frequency 2.20e+7 - 3.00e+7 Hz
- Contract Resistance: <10mOhm
- Contract Resistance: <10mOhm
- Contract Resistance: <10mOhm
- Contract Resistance: 25 mOhm
$ 1639/MT
- Specific Gravity: 3.75 - 4.25 g/cc
- Hardness, Shore A: 75 - 85
- Tensile Strength at Break: >= 2.76 MPa
- Elongation at Break: >= 90 %
- Tear Strength: 10.5 kN/m
$ 1608/MT
- Specific Gravity: >= 1.00 g/cc
- Copper, Cu: <= 75 %
- Silver, Ag: <= 10 %
- Physical Form: Gray paste
- Proprietary Silicone Resin wt. % Max: 25
- Treated Fumed Silica wt. % Max: 5
$ 2588/MT
- Specific Gravity: 1.70 g/cc
- Thickness: 67.0 - 93.0 microns
- Hardness, Shore A: 90
- Tensile Strength: 20.7 MPa
- Tear Strength: 26.3 kN/m
$ 1756/MT
- Specific Gravity: 2.20 g/cc
- Deformation: 30 %
- Hardness, Shore A: 65
- Tensile Strength at Break: 2.24 MPa
- Elongation at Break: 65 %
$ 1873/MT
- Specific Gravity: 2.45 - 2.95 g/cc
- Hardness, Shore A: 28 - 42
- Tensile Strength at Break: >= 0.552 MPa
- Tear Strength: 3.50 kN/m
- Compression Set: 80 %
$ 1568/MT
- Thickness: 254 - 5080 microns
- Flammability, UL94: V-0
- Carrier: Fiberglass no PSA
- Color: Dark Gray
$ 1747/MT
- Specific Gravity: 1.35 - 1.85 g/cc
- Hardness, Shore A: 40 - 50
- Tensile Strength at Break: >= 1.38 MPa
- Elongation at Break: >= 75 %
- Tear Strength: 3.50 kN/m
$ 1940/MT
- Specific Gravity: 3.60 g/cc
- Volatile Organic Compounds (VOC) Content: 0.00 g/l
- Thickness: 178 microns
- Shear Strength: >= 1.03 MPa
- Volume Resistivity: <= 0.010 ohm-cm
$ 1825/MT
- Specific Gravity: >= 1.00 g/cc
- Flash Point: >= 93.3 °C
- Color: White
- Physical Form: White Paste with Acetic acid odor
- Silica, Trimethylated wt. % Max: 10
$ 1451/MT
- Specific Gravity: 1.70 g/cc
- Thickness: 1000 - 5100 microns
- Hardness, Shore A: <= 5.0
- Thermal Conductivity: 1.60 W/m-K
- Carrier: Fiberglass
- Color: Light Gray
$ 1628/MT
- Specific Gravity: >= 1.00 g/cc
- Solubility in Water: 0.00 %
- Color: White
- Physical Form: White Paste with Acetic acid odor
- Silica, Trimethylated wt. % Max: 10
$ 1746/MT
- Specific Gravity: 1.02 g/cc
- Volatile Organic Compounds (VOC) Content: 366 g/l
- Viscosity: 100 cP
- Maximum Service Temperature, Air: 204 °C
- Minimum Service Temperature, Air: -60.0 °C
$ 2227/MT
- Specific Gravity: 3.10 g/cc
- Volatile Organic Compounds (VOC) Content: 9.0 g/l
- Thickness: 178 microns
- Shear Strength: >= 1.03 MPa
- Volume Resistivity: <= 0.010 ohm-cm
$ 1714/MT
- Specific Gravity: 2.00 g/cc
- Thickness: 250 - 5000 microns
- Deformation: 26 % @Thickness 3.17 mm, Pressure 0.0345 MPa
- Deformation: 36 % @Thickness 3.17 mm, Pressure 0.0689 MPa
- Deformation: 59 % @Thickness 3.17 mm, Pressure 0.172 MPa
$ 1599/MT
- Specific Gravity: >= 1.00 g/cc
- Solubility in Water: 0.00 %
- Flash Point: >= 93.3 °C
- Calcium Carbonate wt. % Max: 6
- Color: Beige
$ 2518/MT
- Specific Gravity: >= 1.00 g/cc
- Copper, Cu: <= 75 %
- Silver, Ag: <= 10 %
- Physical Form: Gray paste
- Proprietary Silicone Resin wt. % Max: 25
- Treated Fumed Silica wt. % Max: 5
$ 1454/MT
- Specific Gravity: 1.45 - 1.95 g/cc
- Hardness, Shore A: 55 - 65
- Tensile Strength at Break: >= 1.24 MPa
- Elongation at Break: >= 100 %
- Tear Strength: 5.25 kN/m
$ 1461/MT
- Specific Gravity: 1.55 g/cc
- Thickness: 200 - 300 microns
- Outgassing - Total Mass Loss: 0.12 %
- Outgassing - Total Mass Loss: 0.55 %
- Hardness, Shore A: 80
$ 1781/MT
- Specific Gravity: 2.60 g/cc
- Viscosity: 350000 cP
- Outgassing - Total Mass Loss: <= 0.20 %
- CTE, linear: 150 µm/m-°C
- Specific Heat Capacity: 1.00 J/g-°C
$ 1757/MT
- Specific Gravity: 2.30 g/cc
- Viscosity: 190000 cP
- Outgassing - Total Mass Loss: 0.21 %
- CTE, linear: 300 µm/m-°C
- Specific Heat Capacity: 1.00 J/g-°C
$ 1669/MT
- Specific Gravity: 3.40 g/cc
- Hardness, Shore A: 55
- Tensile Strength: 3.44 MPa
- Elongation at Break: >= 200 %
- Tear Strength: 10.5 kN/m
$ 2089/MT
- Specific Gravity: 1.70 - 2.20 g/cc
- Hardness, Shore A: 60 - 80
- Tensile Strength: >= 1.38 MPa
- Elongation at Break: <= 200 %
- Tear Strength: <= 9.64 kN/m
$ 2273/MT
- Specific Gravity: 1.20 g/cc
- Thickness: 0.380 microns
- Deformation: 6.0 % @Thickness 2.54 mm, Pressure 0.00689 MPa
- Deformation: 23 % @Thickness 2.54 mm, Pressure 0.0138 MPa
- Deformation: 25 % @Thickness 2.54 mm, Pressure 0.0207 MPa
$ 1557/MT
- Specific Gravity: 1.60 - 2.10 g/cc
- Hardness, Shore A: 55 - 75
- Tensile Strength: >= 1.03 MPa
- Elongation at Break: >= 75 %
- Tear Strength: >= 7.01 kN/m
$ 1453/MT
- Specific Gravity: 2.30 g/cc
- Outgassing - Total Mass Loss: 0.18 %
- Outgassing - Total Mass Loss: 0.40 %
- Hardness, Shore A: 85
- Elongation at Break: 30 %
$ 2237/MT
- Density: 3.10 g/cc
- Thickness: 25.4 microns
- Thermal Conductivity: 0.519 W/m-K
- Maximum Service Temperature, Air: 204 °C
- Minimum Service Temperature, Air: -40.0 °C
$ 1895/MT
- Specific Gravity: 1.50 g/cc
- Viscosity: 2.5 cP
- Outgassing - Total Mass Loss: 0.21 %
- Outgassing - Total Mass Loss: 0.32 %
- Hardness, Shore A: 70
$ 1627/MT
- Specific Gravity: 2.20 g/cc
- Hardness, Shore A: 65
- Tensile Strength at Break: >= 1.38 MPa
- Compression Set: 50 %
- Volume Resistivity: 0.020 ohm-cm
$ 1808/MT
- Specific Gravity: >= 1.00 g/cc
- Flash Point: >= 93.3 °C
- Silica, Trimethylated wt. % Max: 10
- Silicone Resin %: >80
- Titanium Dioxide 13463-67-7 %: <10
$ 1539/MT
- Specific Gravity: 2.20 g/cc
- Thickness: 900 - 1100 microns
- Thickness: 1150 - 1650 microns
- Thickness: 1620 - 1980 microns
- Thickness: 2250 - 2750 microns
$ 1573/MT
- Specific Gravity: 2.45 g/cc
- Viscosity: 3.0 cP
- Outgassing - Total Mass Loss: 0.10 %
- Outgassing - Total Mass Loss: 0.17 %
- Hardness, Shore A: 50
$ 1795/MT
- Specific Gravity: 3.40 g/cc
- Hardness, Shore A: 55
- Tensile Strength at Break: 3.45 MPa
- Elongation at Break: >= 200 %
- Tear Strength: 10.5 kN/m
$ 1575/MT
- Specific Gravity: 2.25 g/cc
- Thickness: 250 microns
- Deformation: 36 % @Thickness 2.54 mm, Pressure 0.00689 MPa
- Deformation: 47 % @Thickness 2.54 mm, Pressure 0.0138 MPa
- Deformation: 54 % @Thickness 2.54 mm, Pressure 0.0207 MPa
$ 1445/MT
- Specific Gravity: 2.08 g/cc
- Viscosity: >= 5.0 cP
- Hardness, Shore A: 25
- CTE, linear: 150 µm/m-°C
- Specific Heat Capacity: 0.900 J/g-°C
$ 1919/MT
- Specific Gravity: 2.30 g/cc
- Thickness: 900 - 1100 microns
- Thickness: 1620 - 1980 microns
- Thickness: 2250 - 2750 microns
- Thickness: 3050 - 3550 microns
$ 1900/MT
- Specific Gravity: 3.50 - 4.00 g/cc
- Volatile Organic Compounds (VOC) Content: 151 g/l
- Thickness: 30.0 microns
- Shear Strength: >= 1.38 MPa
- Maximum Service Temperature, Air: 200 °C
$ 1838/MT
- Specific Gravity: 1.55 g/cc
- Thickness: 200 - 300 microns
- Outgassing - Total Mass Loss: 0.12 %
- Outgassing - Total Mass Loss: 0.55 %
- Hardness, Shore A: 80
$ 1671/MT
- Specific Gravity: 1.55 - 2.05 g/cc
- Hardness, Shore A: 50 - 64
- Tensile Strength at Break: >= 1.03 MPa
- Elongation at Break: >= 100 %
- Tear Strength: 6.130 kN/m
$ 1508/MT
- Flash Point: >= 93.3 °C
- Carbon, C: <= 30 %
- Nickel, Ni: <= 40 %
- Acrylonitrile Copolymer wt. % Max: 1
- Nickel Oxide wt. % Max: 0.2
$ 1647/MT
- Specific Gravity: 1.70 g/cc
- Hardness, Shore A: 50 - 60
- Tensile Strength at Break: >= 0.689 MPa
- Elongation at Break: >= 50 %
- Compression Set: <= 8.8 %
$ 1457/MT
- Specific Gravity: 1.55 - 2.05 g/cc
- Deformation: 0.0060 %
- Deformation: 0.010 %
- Deformation: 0.014 %
- Deformation: 0.018 %
$ 1492/MT
- Specific Gravity: >= 1.00 g/cc
- Flash Point: >= 93.3 °C
- Silicone Resin %: <65
$ 2084/MT
- Specific Gravity: 3.045 - 3.955 g/cc
- Hardness, Shore A: 73 - 87
- Tensile Strength: 2.76 MPa
- Elongation at Break: 100 - 300 %
- Tear Strength: 7.01 kN/m
$ 1734/MT
- Specific Gravity: 2.10 g/cc
- Thickness: 225 - 275 microns
- Hardness, Shore A: 70
- Tensile Strength: 26.9 MPa
- Elongation at Break: 30 %
$ 1587/MT
- Thickness: 130 microns
- Tensile Strength: 34.5 MPa
- Tear Strength: 30.7 kN/m
- Peel Strength: 0.180 kN/m
- Thermal Conductivity: 1.10 W/m-K
$ 1908/MT
- Specific Gravity: >= 0.960 g/cc
- Flash Point: >= 46.00 °C
- Color: Straw
- Physical Form: Straw colored liquid slight odor
- Platinum Siloxane Complex wt. % Max: 5
$ 2106/MT
- Specific Gravity: 1.70 g/cc
- Thickness: 900 - 1100 microns
- Thickness: 1620 - 1980 microns
- Thickness: 2250 - 2750 microns
- Thickness: 3050 - 3550 microns
$ 1830/MT
- Specific Gravity: 2.30 g/cc
- Thickness: 460 - 560 microns
- Thickness: 900 - 1100 microns
- Thickness: 1620 - 1980 microns
- Thickness: 2250 - 2750 microns
$ 1623/MT
- Specific Gravity: 2.45 g/cc
- Thickness: 305 - 355 microns
- Hardness, Shore A: 80
- Tensile Strength: 17.2 MPa
- Elongation at Break: 40 %
$ 1505/MT
- Specific Gravity: 2.00 g/cc
- Thickness: 460 - 560 microns
- Thickness: 900 - 1100 microns
- Thickness: 1620 - 1980 microns
- Thickness: 2250 - 2750 microns
$ 1584/MT
- Specific Gravity: 1.60 g/cc
- Thickness: 200 - 300 microns
- Outgassing - Total Mass Loss: 0.10 %
- Outgassing - Total Mass Loss: 0.40 %
- Hardness, Shore A: 80
$ 1460/MT
- Specific Gravity: 1.00 g/cc
- Solubility in Water: 0.00 %
- Flash Point: >= 93.3 °C
- Color: White
- Fluorosilicone Proprietary wt. % Max: 50
$ 1646/MT
- Specific Gravity: 1.55 - 2.05 g/cc
- Hardness, Shore A: 55 - 75
- Tensile Strength: >= 1.03 MPa
- Elongation at Break: <= 75 %
- Tear Strength: <= 4.38 kN/m
$ 1448/MT
- Specific Gravity: 0.980 - 1.58 g/cc
- Hardness, Shore A: 65 - 75
- Tensile Strength: >= 3.45 MPa
- Elongation at Break: >= 75 %
- Tear Strength: <= 8.77 kN/m
$ 1558/MT
- Specific Gravity: 3.40 g/cc
- Hardness, Shore A: 55
- Tensile Strength at Break: 3.45 MPa
- Elongation at Break: >= 200 %
- Tear Strength: 10.5 kN/m
$ 2135/MT
- Specific Gravity: 3.40 g/cc
- Hardness, Shore A: 55
- Tensile Strength at Break: 3.45 MPa
- Elongation at Break: >= 200 %
- Tear Strength: 10.5 kN/m
$ 1523/MT
- Thickness: 406 - 609 microns
- Outgassing - Total Mass Loss: 0.010 %
- Outgassing - Total Mass Loss: 57 %
- Thermal Conductivity: 2.16 W/m-K
- Dielectric Breakdown: 4000 V
$ 2400/MT
- Specific Gravity: 1.55 - 2.05 g/cc
- Hardness, Shore A: 50 - 70
- Tensile Strength at Break: >= 1.38 MPa
- Elongation at Break: >= 75 %
- Compression Set: <= 30 %
$ 1680/MT
- Tensile Strength: 4.14 MPa
- Tear Strength: 12.3 kN/m
- Maximum Service Temperature, Air: 125 °C
- Minimum Service Temperature, Air: -45.0 °C
- Volume Resistivity: <= 0.0070 ohm-cm
$ 1724/MT
- Specific Gravity: 2.00 g/cc
- Volatile Organic Compounds (VOC) Content: 257 g/l
- Thickness: 254 microns
- Shear Strength: >= 0.414 MPa
- Volume Resistivity: <= 0.010 ohm-cm
$ 2265/MT
- Specific Gravity: 3.22 - 3.42 g/cc
- Solids Content: 72 %
- Volatile Organic Compounds (VOC) Content: 83 g/l
- Brookfield Viscosity: 100 cP
- Thickness: 50.8 microns
$ 1829/MT
- Specific Gravity: 1.65 - 2.15 g/cc
- Hardness, Shore A: 58 - 72
- Tensile Strength at Break: >= 1.38 MPa
- Elongation at Break: 100 - 300 %
- Tear Strength: 5.250 kN/m
$ 1675/MT
- Specific Gravity: 1.75 - 2.25 g/cc
- Hardness, Shore A: 55 - 75
- Tensile Strength at Break: >= 1.38 MPa
- Tensile Strength: 1.40 MPa
- Tensile Strength: 1.19 MPa @Temperature 22.0 °C, Time 252000 sec
$ 1812/MT
- Specific Gravity: 2.10 g/cc
- Hardness, Shore A: 78
- Elongation at Break: 30 %
- CTE, linear: 112 µm/m-°C @Temperature 24.0 - 105 °C
- Thermal Conductivity: 0.900 W/m-K
$ 1704/MT
- Specific Gravity: 3.05 - 3.95 g/cc
- Hardness, Shore A: 78 - 92
- Tensile Strength at Break: >= 2.76 MPa
- Elongation at Break: 100 - 300 %
- Tear Strength: 7.00 kN/m
$ 1579/MT
- Specific Gravity: 2.25 g/cc
- Thickness: 100 microns
- Deformation: 36 % @Thickness 2.54 mm, Pressure 0.00689 MPa
- Deformation: 47 % @Thickness 2.54 mm, Pressure 0.0138 MPa
- Deformation: 54 % @Thickness 2.54 mm, Pressure 0.0207 MPa
$ 1668/MT
- Specific Gravity: 1.50 g/cc
- Thickness: 0.380 microns
- Deformation: 13 % @Thickness 2.54 mm, Pressure 0.00689 MPa
- Deformation: 33 % @Thickness 2.54 mm, Pressure 0.0138 MPa
- Deformation: 43 % @Thickness 2.54 mm, Pressure 0.0207 MPa
$ 1576/MT
- Specific Gravity: 1.40 g/cc
- Thickness: 20.0 - 80.0 microns
- Deformation: 7.0 % @Thickness 1.52 mm, Pressure 0.0345 MPa
- Deformation: 11 % @Thickness 1.52 mm, Pressure 0.0689 MPa
- Deformation: 12 % @Thickness 1.52 mm, Pressure 0.172 MPa
Delivery Silicone Parker Chomerics
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):| Country | 20’ Container | 40’ Container | 5,000 MT |
|---|---|---|---|
| 🇦🇺 Australia | $3345 | $4181 | $401400 |
| 🇦🇹 Austria | $2825 | $3531 | $339000 |
| 🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
| 🇦🇱 Albania | $2500 | $3125 | $300000 |
| 🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
| 🇦🇴 Angola | $2762.5 | $3453 | $331500 |
| 🇦🇷 Argentina | $3230 | $4038 | $387600 |
| 🇦🇲 Armenia | $2625 | $3281 | $315000 |
| 🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
| 🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
| 🇧🇭 Bahrain | $3095 | $3869 | $371400 |
| 🇧🇾 Belarus | $2825 | $3531 | $339000 |
| 🇧🇿 Belize | $3155 | $3944 | $378600 |
| 🇧🇪 Belgium | $2575 | $3219 | $309000 |
| 🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
| 🇧🇴 Bolivia | $3230 | $4038 | $387600 |
| 🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
| 🇧🇷 Brazil | $3120 | $3900 | $374400 |
| 🇭🇺 Hungary | $2575 | $3219 | $309000 |
| 🇻🇪 Venezuela | $3230 | $4038 | $387600 |
| 🇻🇳 Vietnam | $2625 | $3281 | $315000 |
| 🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
| 🇬🇹 Guatemala | $3230 | $4038 | $387600 |
| 🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
| 🇩🇪 Germany | $2475 | $3094 | $297000 |
| 🇭🇳 Honduras | $3230 | $4038 | $387600 |
| 🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
| 🇬🇷 Greece | $2575 | $3219 | $309000 |
| 🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
| 🇩🇰 Denmark | $2400 | $3000 | $288000 |
| 🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
| 🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
| 🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
| 🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
| 🇮🇱 Israel | $2625 | $3281 | $315000 |
| 🇮🇳 India | $3712.5 | $4641 | $445500 |
| 🇮🇩 Indonesia | $3095 | $3869 | $371400 |
| 🇯🇴 Jordan | $2625 | $3281 | $315000 |
| 🇮🇶 Iraq | $2625 | $3281 | $315000 |
| 🇮🇷 Iran | $3095 | $3869 | $371400 |
| 🇮🇪 Ireland | $2500 | $3125 | $300000 |
| 🇮🇸 Iceland | $2575 | $3219 | $309000 |
| 🇪🇸 Spain | $2500 | $3125 | $300000 |
| 🇮🇹 Italy | $2400 | $3000 | $288000 |
| 🇾🇪 Yemen | $2625 | $3281 | $315000 |
| 🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
| 🇰🇭 Cambodia | $3095 | $3869 | $371400 |
| 🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
| 🇨🇦 Canada | $3230 | $4038 | $387600 |
| 🇶🇦 Qatar | $2625 | $3281 | $315000 |
| 🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
| 🇨🇾 Cyprus | $2625 | $3281 | $315000 |
| 🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
| 🇨🇳 China | $3712.5 | $4641 | $445500 |
| 🇨🇴 Colombia | $3230 | $4038 | $387600 |
| 🇰🇷 Korea South | $2625 | $3281 | $315000 |
| 🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
| 🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
| 🇨🇺 Cuba | $3230 | $4038 | $387600 |
| 🇰🇼 Kuwait | $2625 | $3281 | $315000 |
| 🇱🇻 Latvia | $2575 | $3219 | $309000 |
| 🇱🇧 Lebanon | $2625 | $3281 | $315000 |
| 🇱🇾 Libya | $2762.5 | $3453 | $331500 |
| 🇱🇹 Lithuania | $2500 | $3125 | $300000 |
| 🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
| 🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
| 🇲🇾 Malaysia | $2625 | $3281 | $315000 |
| 🇲🇹 Malta | $2500 | $3125 | $300000 |
| 🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
| 🇲🇽 Mexico | $3155 | $3944 | $378600 |
| 🇲🇩 Moldova | $2400 | $3000 | $288000 |
| 🇲🇨 Monaco | $2475 | $3094 | $297000 |
| 🇲🇳 Mongolia | $2625 | $3281 | $315000 |
| 🇲🇲 Myanmar | $2625 | $3281 | $315000 |
| 🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
| 🇳🇵 Nepal | $2625 | $3281 | $315000 |
| 🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
| 🇳🇱 Netherlands | $2575 | $3219 | $309000 |
| 🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
| 🇳🇿 New Zealand | $3345 | $4181 | $401400 |
| 🇳🇴 Norway | $2400 | $3000 | $288000 |
| 🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
| 🇴🇲 Oman | $2625 | $3281 | $315000 |
| 🇵🇰 Pakistan | $2625 | $3281 | $315000 |
| 🇵🇦 Panama | $3230 | $4038 | $387600 |
| 🇵🇾 Paraguay | $3155 | $3944 | $378600 |
| 🇵🇪 Peru | $3230 | $4038 | $387600 |
| 🇵🇱 Poland | $2575 | $3219 | $309000 |
| 🇵🇹 Portugal | $2500 | $3125 | $300000 |
| 🇷🇺 Russia | $2575 | $3219 | $309000 |
| 🇷🇴 Romania | $2475 | $3094 | $297000 |
| 🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
| 🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
| 🇷🇸 Serbia | $2575 | $3219 | $309000 |
| 🇸🇬 Singapore | $3095 | $3869 | $371400 |
| 🇸🇾 Syria | $3095 | $3869 | $371400 |
| 🇸🇰 Slovakia | $2500 | $3125 | $300000 |
| 🇸🇮 Slovenia | $2500 | $3125 | $300000 |
| 🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
| 🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
| 🇺🇸 United States | $2902.5 | $3628 | $348300 |
| 🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
| 🇹🇭 Thailand | $2625 | $3281 | $315000 |
| 🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
| 🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
| 🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
| 🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
| 🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
| 🇹🇷 Turkey | $2625 | $3281 | $315000 |
| 🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
| 🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
| 🇺🇦 Ukraine | $2500 | $3125 | $300000 |
| 🇺🇾 Uruguay | $2675 | $3344 | $321000 |
| 🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
| 🇵🇭 Philippines | $2625 | $3281 | $315000 |
| 🇫🇮 Finland | $2500 | $3125 | $300000 |
| 🇫🇷 France | $2575 | $3219 | $309000 |
| 🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
| 🇲🇪 Montenegro | $2575 | $3219 | $309000 |
| 🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
| 🇨🇱 Chile | $3355 | $4194 | $402600 |
| 🇨🇭 Switzerland | $2575 | $3219 | $309000 |
| 🇸🇪 Sweden | $2500 | $3125 | $300000 |
| 🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
| 🇪🇨 Ecuador | $3155 | $3944 | $378600 |
| 🇦🇸 American Samoa | $3345 | $4181 | $401400 |
| 🇸🇻 El Salvador | $3230 | $4038 | $387600 |
| 🇪🇪 Estonia | $2575 | $3219 | $309000 |
| 🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
| 🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
| 🇯🇵 Japan | $3095 | $3869 | $371400 |
| 🇦🇩 Andorra | $2500 | $3125 | $300000 |
| 🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
| 🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
| 🇧🇧 Barbados | $3230 | $4038 | $387600 |
| 🇧🇹 Bhutan | $3095 | $3869 | $371400 |
| 🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
| 🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
| 🇧🇳 Brunei | $2625 | $3281 | $315000 |
| 🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
| 🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
| 🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
| 🇹🇩 Chad | $2762.5 | $3453 | $331500 |
| 🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
| 🇧🇯 Benin | $2762.5 | $3453 | $331500 |
| 🇩🇲 Dominica | $3230 | $4038 | $387600 |
| 🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
| 🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
| 🇫🇯 Fiji | $3345 | $4181 | $401400 |
| 🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
| 🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
| 🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
| 🇰🇮 Kiribati | $3345 | $4181 | $401400 |
| 🇬🇩 Grenada | $3355 | $4194 | $402600 |
| 🇬🇺 Guam | $3345 | $4181 | $401400 |
| 🇬🇾 Guyana | $3230 | $4038 | $387600 |
| 🇭🇹 Haiti | $3120 | $3900 | $374400 |
| 🇯🇲 Jamaica | $3230 | $4038 | $387600 |
| 🇰🇵 Korea, North | $2625 | $3281 | $315000 |
| 🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
| 🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
| 🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
| 🇲🇻 Maldives | $2625 | $3281 | $315000 |
| 🇲🇱 Mali | $2762.5 | $3453 | $331500 |
| 🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
| 🇨🇼 Curaçao | $3230 | $4038 | $387600 |
| 🇦🇼 Aruba | $3120 | $3900 | $374400 |
| 🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
| 🇳🇪 Niger | $2762.5 | $3453 | $331500 |
| 🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
| 🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
| 🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
| 🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
| 🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
| 🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
| 🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
| 🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
| 🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
| 🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
| 🇸🇲 San Marino | $2500 | $3125 | $300000 |
| 🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
| 🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
| 🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
| 🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
| 🇸🇷 Suriname | $3230 | $4038 | $387600 |
| 🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
| 🇹🇬 Togo | $2762.5 | $3453 | $331500 |
| 🇹🇴 Tonga | $3345 | $4181 | $401400 |
| 🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
| 🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
| 🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, oil tankers for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.
