$ 1692/MT
- Specific Gravity: 0.960 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 45
- Tensile Strength, Ultimate: 13.4 MPa
$ 1868/MT
- Specific Gravity: 0.960 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 45
- Tensile Strength, Ultimate: 13.4 MPa
$ 2012/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 1.5 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 60
- Tensile Strength, Yield: 1.72 MPa
$ 1449/MT
- Density: 0.940 g/cc
- Linear Mold Shrinkage: 0.0208 cm/cm
- Melt Flow: 0.50 g/10 min
- Hardness, Shore A: 77
- Tensile Strength, Ultimate: 1.592 MPa
$ 1459/MT
- Specific Gravity: 1.92 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 93
- Tensile Strength, Yield: 5.52 MPa
$ 1574/MT
- Density: 0.890 g/cc
- Melt Flow: 10 - 20 g/10 min
- Hardness, Shore A: 44
- Tensile Strength, Ultimate: 2.80 MPa
- Elongation at Break: 800 %
- Tear Strength Test: 17.5 - 24.5
$ 2508/MT
- Specific Gravity: 0.952 g/cc
- Melt Flow: 3.61 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 58
- Tensile Strength at Break: 4.36 MPa
- Elongation at Break: 760 %
- Tear Strength: 28.0 kN/m
$ 1582/MT
- Specific Gravity: 1.09 g/cc
- Hardness, Shore D: 52
- Tensile Strength at Break: 24.0 MPa
- Elongation at Break: 200 %
- Tear Strength: 24.5 kN/m
$ 1479/MT
- Specific Gravity: 1.20 g/cc
- Hardness, Shore A: 65
- Tensile Strength at Break: 16.0 MPa
- Elongation at Break: 500 %
- Tear Strength: 29.8 kN/m
$ 2163/MT
- Specific Gravity: 0.975 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 6.75 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 86
- Tensile Strength, Ultimate: 11.7 MPa
$ 1470/MT
- Specific Gravity: 1.46 g/cc
- Melt Flow: 19.2 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 93
- Tensile Strength, Yield: 4.97 MPa
- Elongation at Break: 180 %
$ 1828/MT
- Density: 1.12 g/cc
- Hardness, Shore A: 31
- Hardness, Shore A: 37
- Hardness, Shore A: 37
- Hardness, Shore A: 38
$ 1574/MT
- Density: 1.40 g/cc
- Melt Flow: 0.85 g/10 min
- Hardness, Shore A: 69
- Tensile Strength, Ultimate: 5.30 MPa
- Elongation at Break: 950 %
$ 1878/MT
- Specific Gravity: 1.15 g/cc
- Linear Mold Shrinkage: 0.010 - 0.030 cm/cm
- Hardness, Shore A: 63
- Tensile Strength: 5.70 MPa
- Tensile Strength, Ultimate: 3.20 MPa
$ 1590/MT
- Specific Gravity: 1.98 g/cc
- Linear Mold Shrinkage: 0.011 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 46
- Tensile Strength, Yield: 6.21 MPa
$ 1736/MT
- Density: 0.900 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 10 g/10 min
- Hardness, Shore D: 65
- Tensile Strength, Ultimate: 19.3 MPa
$ 2003/MT
- Density: 0.910 g/cc
- Linear Mold Shrinkage: 0.017 cm/cm
- Melt Flow: 1.0 - 5.0 g/10 min
- Hardness, Shore A: 55
- Tensile Strength, Ultimate: 10.0 MPa
$ 2095/MT
- Specific Gravity: 1.07 g/cc
- Melt Flow: 0.50 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 70
- Tensile Strength, Yield: 2.76 MPa
- Tensile Strength, Yield: 8.96 MPa
$ 2188/MT
- Density: 0.9616 g/cc
- Melt Flow: 3.1 g/10 min
- Hardness, Shore A: 55
- Tensile Strength, Ultimate: 13.7 MPa
- Elongation at Break: 597 %
$ 1461/MT
- Density: 1.065 g/cc
- Melt Flow: 1.5 g/10 min
- Hardness, Shore A: 80
- Tensile Strength, Ultimate: 9.00 MPa
- Elongation at Break: >= 1000 %
$ 1452/MT
- Specific Gravity: 0.932 g/cc
- Melt Flow: 1.7 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 69
- Tensile Strength at Break: 5.10 MPa
- Elongation at Break: 690 %
- Tear Strength: 36.8 kN/m
$ 1986/MT
- Density: 0.920 g/cc
- Hardness, Shore A: 73
- Tensile Strength, Ultimate: >= 7.45 MPa
- Elongation at Break: >= 400 %
- Tear Strength: >= 38.53 kN/m
$ 1492/MT
- Density: 0.910 g/cc
- Melt Flow: 8.0 g/10 min
- Hardness, Shore D: 42
- Tensile Strength, Ultimate: 10.3 - 14.5 MPa
- Elongation at Break: 500 - 700 %
$ 1594/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 10 - 14 g/10 min
- Hardness, Shore A: 60
- Tensile Strength, Ultimate: >= 3.60 MPa
$ 1753/MT
- Specific Gravity: 1.15 g/cc
- Hardness, Shore A: 61
- Tensile Strength at Break: 7.03 MPa
- Elongation at Break: 450 %
- Tear Strength: 29.8 kN/m
$ 1807/MT
- Hardness, Shore A: 61
- Hardness, Shore A: 74
- Hardness, Shore A: 75
- Hardness, Shore A: 77
- Tensile Strength, Ultimate: 7.012 MPa
$ 1789/MT
- Specific Gravity: 1.06 g/cc
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 46
- Tensile Strength, Yield: 1.10 MPa
- Tensile Strength, Yield: 5.52 MPa
$ 1453/MT
- Specific Gravity: 0.962 g/cc
- Melt Flow: 1.32 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 39
- Tensile Strength, Yield: 17.1 MPa
- Elongation at Break: 630 %
$ 2548/MT
- Specific Gravity: 1.20 g/cc
- Melt Flow: 70 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 64
- Tensile Strength, Yield: 3.45 MPa
- Tensile Strength, Yield: 1.86 MPa @Strain 100 %
$ 1582/MT
- Hardness, Shore A: 35
- Hardness, Shore A: 37
- Hardness, Shore A: 40
- Tensile Strength, Ultimate: 7.412 MPa
- Tensile Strength, Ultimate: 8.115 MPa
$ 1979/MT
- Density: 0.992 g/cc
- Melt Flow: 4.3 g/10 min
- Hardness, Shore A: 83
- Tensile Strength, Ultimate: 13.7 MPa
- Elongation at Break: 730 %
$ 1657/MT
- Specific Gravity: 0.912 g/cc
- Melt Flow: 1.5 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 37
- Tensile Strength, Yield: 5.72 MPa
- Tensile Strength, Yield: 1.00 MPa @Strain 100 %
$ 1697/MT
- Hardness, Shore A: 48
- Hardness, Shore A: 51
- Hardness, Shore A: 55
- Tensile Strength, Ultimate: 9.825 MPa
- Tensile Strength, Ultimate: 10.63 MPa
$ 1666/MT
- Density: 1.14 g/cc
- Hardness, Shore A: 52
- Hardness, Shore A: 54
- Hardness, Shore A: 54
- Hardness, Shore A: 55
$ 1779/MT
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 1.0 g/10 min
- Hardness, Shore D: 53
- Tensile Strength, Ultimate: 22.4 MPa
- Elongation at Break: 630 %
$ 2249/MT
- Density: 1.17 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 10 - 14 g/10 min
- Hardness, Shore A: 54
- Tensile Strength, Ultimate: >= 4.00 MPa
$ 1566/MT
- Specific Gravity: 1.07 g/cc
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 80
- Tensile Strength, Yield: 9.31 MPa
- Elongation at Break: 1400 %
- Tear Strength: 40.3 kN/m
$ 1604/MT
- Specific Gravity: 1.15 g/cc
- Hardness, Shore A: 68
- Tensile Strength at Break: 11.7 MPa
- Elongation at Break: 600 %
- Tear Strength: 45.6 kN/m
$ 1501/MT
- Density: 0.920 g/cc
- Linear Mold Shrinkage: 0.0118 cm/cm
- Melt Flow: 5.3 g/10 min
- Hardness, Shore D: 40.4
- Tensile Strength, Ultimate: 10.1 MPa
$ 1934/MT
- Density: 1.13 g/cc
- Hardness, Shore A: 18
- Hardness, Shore A: 19
- Hardness, Shore A: 20
- Hardness, Shore A: 21
$ 1661/MT
- Density: 1.13 g/cc
- Hardness, Shore A: 18
- Hardness, Shore A: 19
- Hardness, Shore A: 20
- Hardness, Shore A: 21
$ 1469/MT
- Density: 1.13 g/cc
- Hardness, Shore A: 18
- Hardness, Shore A: 19
- Hardness, Shore A: 20
- Hardness, Shore A: 21
$ 1487/MT
- Density: 0.940 g/cc
- Linear Mold Shrinkage: 0.0137 cm/cm
- Melt Flow: 5.0 g/10 min
- Hardness, Shore D: 36
- Tensile Strength, Ultimate: 12.2 MPa
$ 1487/MT
- Specific Gravity: 0.920 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 70
- Tensile Strength, Yield: 2.72 MPa
$ 1968/MT
- Density: 1.063 g/cc
- Linear Mold Shrinkage: 0.0118 cm/cm
- Melt Flow: 6.0 g/10 min
- Hardness, Shore A: 85
- Tensile Strength, Ultimate: 11.6 MPa
$ 1685/MT
- Density: 1.23 g/cc
- Melt Flow: 7.0 g/10 min
- Hardness, Shore D: 65
- Tensile Strength, Ultimate: 16.8 MPa
- Elongation at Break: 830 %
$ 1719/MT
- Specific Gravity: 1.15 g/cc
- Hardness, Shore A: 65
- Tensile Strength at Break: 11.0 MPa
- Elongation at Break: 600 %
- Tear Strength: 45.6 kN/m
$ 1899/MT
- Density: 1.13 g/cc
- Hardness, Shore A: 18
- Hardness, Shore A: 19
- Hardness, Shore A: 20
- Hardness, Shore A: 21
$ 1972/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage: 0.010 - 0.030 cm/cm
- Melt Flow: 10 g/10 min @Load 10.0 kg, Temperature 190 °C
- Hardness, Shore A: 64
- Tensile Strength: 8.90 MPa
$ 1898/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Hardness, Shore A: 62
- Tensile Strength, Ultimate: >= 3.62 MPa
- Elongation at Break: >= 506 %
- Tear Strength: >= 19.6 kN/m
$ 1559/MT
- Specific Gravity: 1.16 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength, Yield: 15.5 MPa
$ 1530/MT
- Specific Gravity: 1.15 g/cc
- Hardness, Shore A: 55
- Tensile Strength at Break: 3.00 MPa
- Elongation at Break: 400 %
- Tear Strength: 15.1 kN/m
$ 2099/MT
- Density: 0.9375 g/cc
- Melt Flow: 0.40 g/10 min
- Hardness, Shore A: 54
- Tensile Strength, Ultimate: 9.30 MPa
- Elongation at Break: 722 %
- Tear Strength: 37.4 kN/m
$ 1752/MT
- Specific Gravity: 1.15 g/cc
- Hardness, Shore A: 63
- Tensile Strength at Break: 4.00 MPa
- Elongation at Break: 360 %
- Tear Strength: 19.3 kN/m
$ 1689/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Melt Flow: 0.50 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 46
- Tensile Strength, Yield: 8.27 MPa
$ 1714/MT
- Hardness, Shore A: 35
- Hardness, Shore A: 41
- Hardness, Shore A: 41
- Hardness, Shore A: 44
- Tensile Strength, Ultimate: 7.58 MPa
$ 2371/MT
- Density: 0.902 g/cc
- Melt Flow: 2.0 g/10 min
- Hardness, Shore A: 66
- Tensile Strength, Ultimate: 10.7 MPa
- Elongation at Break: 690 %
- Tear Strength: 42.4 kN/m
$ 2114/MT
- Density: 1.16 g/cc
- Melt Flow: 1.0 g/10 min
- Hardness, Shore D: 67
- Tensile Strength, Ultimate: 15.8 MPa
- Elongation at Break: 110 %
$ 1581/MT
- Density: 0.975 g/cc
- Melt Flow: 4.5 g/10 min
- Hardness, Shore A: 87
- Tensile Strength, Ultimate: 12.8 MPa
- Elongation at Break: 669 %
$ 2304/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm
- Melt Flow: 2.5 - 5.0 g/10 min
- Hardness, Shore A: 59
- Tensile Strength, Ultimate: >= 4.00 MPa
$ 1469/MT
- Specific Gravity: 1.25 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 46
- Tensile Strength, Yield: 7.17 MPa
$ 2092/MT
- Density: 1.19 g/cc
- Linear Mold Shrinkage: 0.011 cm/cm
- Melt Flow: 1.8 g/10 min
- Hardness, Shore A: 69
- Tensile Strength, Ultimate: 8.17 MPa
$ 1810/MT
- Specific Gravity: 0.892 g/cc
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 2.75 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 51
- Tensile Strength, Ultimate: 13.4 MPa
$ 1880/MT
- Specific Gravity: 1.19 g/cc
- Linear Mold Shrinkage: 0.020 - 0.040 cm/cm
- Melt Flow: 10 g/10 min @Load 10.0 kg, Temperature 190 °C
- Hardness, Shore A: 54
- Tensile Strength: 7.00 MPa
$ 1572/MT
- Density: 0.980 g/cc
- Linear Mold Shrinkage: 0.0123 cm/cm
- Melt Flow: 1.2 g/10 min
- Hardness, Shore D: 56
- Tensile Strength, Ultimate: 19.3 - 28.3 MPa
$ 1753/MT
- Specific Gravity: 1.20 g/cc
- Hardness, Shore A: 65
- Tensile Strength at Break: 12.0 MPa
- Elongation at Break: 720 %
- Tear Strength: 45.6 kN/m
$ 1921/MT
- Specific Gravity: 0.932 g/cc
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 6.83 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 53
- Tensile Strength at Break: 18.8 MPa
$ 1501/MT
- Density: 0.910 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 16 g/10 min
- Hardness, Shore D: 55
- Tensile Strength, Ultimate: 16.6 MPa
$ 1670/MT
- Density: 1.01 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Melt Flow: 3.0 g/10 min @Load 5.00 kg, Temperature 230 °C
- Hardness, Shore A: 87
$ 1559/MT
- Hardness, Shore A: 34
- Hardness, Shore A: 37
- Hardness, Shore A: 40
- Tensile Strength, Ultimate: 7.72 MPa
- Tensile Strength, Ultimate: 8.170 MPa
$ 1503/MT
- Specific Gravity: 1.20 g/cc
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 75
- Tensile Strength, Yield: 2.90 MPa
- Tensile Strength, Yield: 6.83 MPa
$ 1610/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Melt Flow: 10 g/10 min @Load 5.00 kg, Temperature 230 °C
- Hardness, Shore A: 68
$ 1781/MT
- Density: 0.968 g/cc
- Linear Mold Shrinkage: 0.01225 cm/cm
- Melt Flow: 5.5 g/10 min
- Hardness, Shore A: 87
- Tensile Strength, Ultimate: 17.4 MPa
$ 1588/MT
- Density: 1.86 g/cc
- Linear Mold Shrinkage: 0.0108 cm/cm
- Melt Flow: 0.90 g/10 min
- Hardness, Shore A: 91
- Tensile Strength, Ultimate: 6.40 MPa
$ 1740/MT
- Density: 1.985 g/cc
- Melt Flow: 7.9 g/10 min
- Hardness, Shore A: 90
- Elongation at Break: 379 %
- Flexural Modulus: 0.113 GPa
- Tear Strength: 62.9 kN/m
$ 1474/MT
- Density: 0.904 g/cc
- Linear Mold Shrinkage: 0.0124 cm/cm
- Melt Flow: 2.7 g/10 min
- Hardness, Shore D: 39
- Tensile Strength, Ultimate: 15.8 MPa
$ 2144/MT
- Density: 1.19 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 2.0 - 10 g/10 min
- Hardness, Shore A: 45
- Tensile Strength, Ultimate: >= 2.50 MPa
$ 1545/MT
- Specific Gravity: 0.892 g/cc
- Linear Mold Shrinkage: 0.00010 cm/cm
- Melt Flow: 128 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 55
- Tensile Strength, Yield: 2.12 MPa
$ 2015/MT
- Specific Gravity: 1.15 g/cc
- Hardness, Shore A: 70
- Tensile Strength at Break: 15.0 MPa
- Elongation at Break: 600 %
- Tear Strength: 45.6 kN/m
$ 2196/MT
- Specific Gravity: 0.920 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 90
- Tensile Strength, Ultimate: 10.3 MPa
$ 1446/MT
- Specific Gravity: 0.910 g/cc
- Melt Flow: 0.50 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 57
- Tensile Strength, Yield: 1.97 MPa
- Tensile Strength, Yield: 10.0 MPa
$ 1723/MT
- Specific Gravity: 1.07 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 33
$ 1522/MT
- Hardness, Shore A: 38
- Hardness, Shore A: 42
- Hardness, Shore A: 43
- Hardness, Shore A: 44
- Tensile Strength, Ultimate: 6.89 MPa
$ 1544/MT
- Specific Gravity: 1.06 g/cc
- Melt Flow: 40 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 15
- Tensile Strength, Yield: 2.76 MPa
- Tensile Strength, Yield: 0.310 MPa @Strain 100 %
$ 1601/MT
- Specific Gravity: 0.900 g/cc
- Melt Flow: 0.50 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 40
- Tensile Strength, Yield: 11.0 MPa
- Elongation at Break: 900 %
$ 1937/MT
- Density: 1.01 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 10 - 15 g/10 min
- Hardness, Shore A: 78
- Tensile Strength, Ultimate: 7.60 MPa
$ 2494/MT
- Specific Gravity: 0.942 g/cc
- Linear Mold Shrinkage: 0.016 cm/cm
- Melt Flow: 75 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 40
- Hardness, Shore A: 45
$ 1496/MT
- Density: 1.007 g/cc
- Melt Flow: 2.8 g/10 min
- Hardness, Shore A: 83
- Tensile Strength, Ultimate: 9.30 MPa
- Elongation at Break: 675 %
$ 1690/MT
- Specific Gravity: 1.15 g/cc
- Hardness, Shore A: 84
- Tensile Strength at Break: 11.9 MPa
- Elongation at Break: 280 %
- Tear Strength: 50.8 kN/m
$ 1458/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.011 cm/cm
- Melt Flow: 2.0 - 5.0 g/10 min
- Hardness, Shore A: 80
- Tensile Strength, Ultimate: >= 9.00 MPa
$ 2539/MT
- Specific Gravity: 0.952 g/cc
- Melt Flow: 2.8 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 53
- Tensile Strength, Ultimate: 4.32 MPa
- Tensile Strength, Ultimate: 18.3 MPa
$ 2529/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage: 0.010 - 0.030 cm/cm
- Melt Flow: 19 g/10 min @Load 10.0 kg, Temperature 190 °C
- Hardness, Shore A: 63
- Tensile Strength: 6.30 MPa
$ 1466/MT
- Density: 0.980 g/cc
- Melt Flow: 4.0 g/10 min
- Hardness, Shore A: 54
- Tensile Strength, Ultimate: 3.80 MPa
- Elongation at Break: >= 1000 %
$ 1475/MT
- Density: 1.074 g/cc
- Linear Mold Shrinkage: 0.0093 cm/cm
- Melt Flow: 1.1 g/10 min
- Hardness, Shore A: 84
- Tensile Strength, Ultimate: 4.30 MPa
$ 1855/MT
- Density: 1.229 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Hardness, Shore A: 70
- Tensile Strength, Ultimate: 3.50 MPa
- Elongation at Break: 696 %
$ 1908/MT
- Specific Gravity: 0.980 g/cc
- Melt Flow: 3.2 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 72
- Hardness, Shore A: 74
- Tensile Strength, Yield: 3.45 MPa
$ 1627/MT
- Density: 0.920 g/cc
- Melt Flow: 2.2 g/10 min
- Hardness, Shore A: 65
- Tensile Strength, Ultimate: >= 7.45 MPa
- Elongation at Break: >= 400 %
- Tear Strength: >= 24.5 kN/m
$ 1963/MT
- Density: 1.16 g/cc
- Hardness, Shore A: 44
- Hardness, Shore A: 46
- Hardness, Shore A: 49
- Hardness, Shore A: 50
$ 2061/MT
- Hardness, Shore A: 36
- Hardness, Shore A: 50
- Hardness, Shore A: 50
- Hardness, Shore A: 50
- Tensile Strength, Ultimate: 8.198 MPa
$ 2180/MT
- Density: 1.87 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 15 g/10 min
- Hardness, Shore D: 50
- Tensile Strength, Ultimate: 7.50 MPa
$ 1481/MT
- Density: 1.16 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 5.0 - 9.0 g/10 min
- Hardness, Shore D: 63
- Tensile Strength, Ultimate: >= 15.2 MPa
$ 2056/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.017 cm/cm
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 30
- Tensile Strength, Yield: 4.48 MPa
$ 1670/MT
- Specific Gravity: 1.03 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 83
- Tensile Strength, Yield: 4.55 MPa
$ 1531/MT
- Specific Gravity: 1.92 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 93
- Hardness, Shore D: 41
$ 1794/MT
- Density: 1.15 g/cc
- Hardness, Shore A: 65
- Hardness, Shore A: 66
- Hardness, Shore A: 67
- Hardness, Shore A: 67
$ 1874/MT
- Specific Gravity: 1.22 g/cc
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 78
- Tensile Strength, Yield: 8.27 MPa
- Elongation at Break: 500 %
$ 2418/MT
- Density: 0.890 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 2.5 g/10 min
- Hardness, Shore D: 46
- Tensile Strength, Ultimate: 12.8 MPa
$ 1673/MT
- Specific Gravity: 1.11 g/cc
- Linear Mold Shrinkage: 0.010 - 0.030 cm/cm
- Melt Flow: 13 g/10 min @Load 10.0 kg, Temperature 190 °C
- Hardness, Shore A: 76
- Tensile Strength: 8.80 MPa
$ 2078/MT
- Density: 0.966 g/cc
- Melt Flow: 10 g/10 min
- Hardness, Shore A: 50
- Tensile Strength, Ultimate: 3.90 MPa
- Elongation at Break: 870 %
- Tear Strength: 23.7 kN/m
$ 1687/MT
- Density: 0.950 g/cc
- Melt Flow: 15.51 g/10 min
- Hardness, Shore A: 91.4
- Tensile Strength, Ultimate: 14.5 MPa
- Elongation at Break: 675 %
$ 1709/MT
- Hardness, Shore A: 34
- Hardness, Shore A: 38
- Hardness, Shore A: 41
- Tensile Strength, Ultimate: 6.27 MPa
- Tensile Strength, Ultimate: 8.48 MPa
$ 1930/MT
- Hardness, Shore A: 29
- Hardness, Shore A: 32
- Hardness, Shore A: 35
- Tensile Strength, Ultimate: 5.14 MPa
- Tensile Strength, Ultimate: 8.20 MPa
$ 2136/MT
- Hardness, Shore A: 33
- Hardness, Shore A: 34
- Hardness, Shore A: 39
- Tensile Strength, Ultimate: 5.93 MPa
- Tensile Strength, Ultimate: 8.34 MPa
$ 2323/MT
- Hardness, Shore A: 51
- Hardness, Shore A: 51
- Hardness, Shore A: 51
- Tensile Strength, Ultimate: 6.83 MPa
- Tensile Strength, Ultimate: 9.404 MPa
$ 2165/MT
- Specific Gravity: 1.15 g/cc
- Hardness, Shore A: 70
- Hardness, Shore A: 60 @Treatment Temp. 140 °C, Time 3.629e+6 sec
- Hardness, Shore A: 67 @Treatment Temp. 120 °C, Time 3.629e+6 sec
- Hardness, Shore A: 75 @Treatment Temp. 100 °C, Time 3.60e+6 sec
$ 1528/MT
- Specific Gravity: 1.19 g/cc
- Linear Mold Shrinkage: 0.010 - 0.030 cm/cm
- Melt Flow: 13 g/10 min @Load 10.0 kg, Temperature 190 °C
- Hardness, Shore A: 72
- Tensile Strength: 11.4 MPa
$ 1536/MT
- Specific Gravity: 1.14 g/cc
- Hardness, Shore A: 58
- Tensile Strength at Break: 11.0 MPa
- Elongation at Break: 680 %
- Tear Strength: 40.3 kN/m
$ 2042/MT
- Specific Gravity: 0.910 g/cc
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 46
- Tensile Strength, Yield: 13.1 MPa
- Tensile Strength, Yield: 11.0 MPa @Strain 100 %
$ 2421/MT
- Density: 1.04 g/cc
- Melt Flow: 4.0 g/10 min
- Hardness, Shore A: 72
- Tensile Strength, Ultimate: 7.60 MPa
- Elongation at Break: 800 %
$ 1513/MT
- Density: 1.20 g/cc
- Melt Flow: 11.5 g/10 min
- Hardness, Shore A: 74
- Tensile Strength, Ultimate: 7.10 MPa
- Elongation at Break: >= 750 %
- Tear Strength: 32.2 kN/m
$ 1962/MT
- Density: 0.905 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Melt Flow: 0.50 g/10 min
- Hardness, Shore A: 51
- Tensile Strength, Ultimate: 8.30 MPa
$ 1933/MT
- Density: 0.901 g/cc
- Linear Mold Shrinkage: 0.0106 cm/cm
- Melt Flow: 0.79 g/10 min
- Hardness, Shore D: 53
- Tensile Strength, Ultimate: 16.7 MPa
$ 1527/MT
- Specific Gravity: 1.20 g/cc
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 62
- Tensile Strength at Break: 6.21 MPa
- Elongation at Break: 700 %
- Tear Strength: 28.0 kN/m
$ 2096/MT
- Density: 1.02 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 3.0 g/10 min
- Hardness, Shore D: 65
- Tensile Strength, Ultimate: 20.7 MPa
$ 2103/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 30 g/10 min
- Hardness, Shore A: 86
- Tensile Strength, Ultimate: 4.00 MPa
$ 1896/MT
- Density: 1.14 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 3.0 g/10 min
- Hardness, Shore A: 87
- Tensile Strength, Ultimate: 10.3 MPa
$ 1682/MT
- Density: 1.10 g/cc
- Hardness, Shore A: 58
- Hardness, Shore A: 58
- Hardness, Shore A: 59
- Hardness, Shore A: 59
$ 1989/MT
- Density: 1.89 g/cc
- Melt Flow: 5.0 g/10 min
- Hardness, Shore A: 89
- Tensile Strength, Ultimate: 4.30 MPa
- Elongation at Break: 350 %
- Tear Strength: 30.0 kN/m
$ 1963/MT
- Specific Gravity: 1.25 g/cc
- Melt Flow: 35 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 85
- Tensile Strength, Yield: 7.58 MPa
- Elongation at Break: 600 %
$ 2000/MT
- Specific Gravity: 0.892 g/cc
- Melt Flow: 100 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 32
- Tensile Strength, Yield: 5.83 MPa
- Elongation at Break: 690 %
$ 1556/MT
- Specific Gravity: 0.892 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 91 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 59
- Tensile Strength at Break: 7.45 MPa
$ 2144/MT
- Density: 0.900 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 3.0 g/10 min
- Hardness, Shore D: 41
- Tensile Strength, Ultimate: 12.8 MPa
$ 2132/MT
- Specific Gravity: 0.902 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 40
- Tensile Strength, Ultimate: 12.5 MPa
$ 1787/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 16.1 g/10 min
- Hardness, Shore A: 59
- Tensile Strength, Ultimate: >= 3.62 MPa
$ 1662/MT
- Specific Gravity: 0.950 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 90
- Tensile Strength, Ultimate: 11.0 MPa
$ 2469/MT
- Specific Gravity: 1.20 g/cc
- Melt Flow: 70 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 64
- Tensile Strength at Break: 3.45 MPa
- Tensile Strength, Yield: 1.86 MPa @Strain 100 %
$ 1530/MT
- Density: 0.970 - 1.03 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Melt Flow: 3.5 - 8.5 g/10 min
- Hardness, Shore A: 85
$ 1594/MT
- Density: 1.85 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 4.2 g/10 min
- Hardness, Shore D: 42
- Tensile Strength, Ultimate: 5.20 MPa
$ 2419/MT
- Density: 0.982 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 8.7 g/10 min
- Hardness, Shore A: 91
- Tensile Strength, Ultimate: 13.1 MPa
$ 1620/MT
- Density: 0.908 g/cc
- Linear Mold Shrinkage: 0.0096 cm/cm
- Melt Flow: 4.5 g/10 min
- Hardness, Shore A: 83
- Tensile Strength, Ultimate: 8.90 MPa
$ 1703/MT
- Density: 0.997 g/cc
- Melt Flow: 2.35 g/10 min
- Hardness, Shore A: 72
- Tensile Strength, Ultimate: 8.80 MPa
- Elongation at Break: 795 %
$ 2077/MT
- Specific Gravity: 0.910 g/cc
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 55
- Tensile Strength, Yield: 21.7 MPa
- Elongation at Break: 850 %
$ 1481/MT
- Density: 1.15 g/cc
- Melt Flow: 1.0 g/10 min @Load 5.00 kg, Temperature 230 °C
- Hardness, Shore A: 58
- Tensile Strength, Ultimate: 6.60 MPa
- Elongation at Break: 900 %
$ 2147/MT
- Density: 1.13 g/cc
- Hardness, Shore A: 40
- Hardness, Shore A: 42
- Hardness, Shore A: 43
- Hardness, Shore A: 44
$ 1714/MT
- Density: 1.06 g/cc
- Melt Flow: 7.0 g/10 min
- Hardness, Shore D: 58
- Flexural Modulus: 0.998 GPa
- Tear Strength: 61.0 kN/m
$ 1952/MT
- Density: 1.06 g/cc
- Melt Flow: 7.0 g/10 min
- Hardness, Shore D: 58
- Flexural Modulus: 0.998 GPa
- Tear Strength: 61.0 kN/m
$ 2077/MT
- Density: 0.980 g/cc
- Melt Flow: 6.0 g/10 min
- Hardness, Shore D: 62
- Tensile Strength, Ultimate: 17.2 MPa
- Elongation at Break: 475 %
$ 1627/MT
- Specific Gravity: 0.920 g/cc
- Linear Mold Shrinkage: 0.016 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 67
- Tensile Strength, Yield: 2.14 MPa
$ 1500/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 49
- Tensile Strength, Yield: 5.17 MPa
$ 1635/MT
- Density: 1.06 g/cc
- Melt Flow: 7.0 g/10 min
- Hardness, Shore A: 50
- Tensile Strength, Ultimate: 6.90 MPa
- Elongation at Break: 550 %
- Tear Strength: 22.0 kN/m
$ 1453/MT
- Density: 1.00 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 10 - 15 g/10 min
- Hardness, Shore A: 78
- Tensile Strength, Ultimate: 8.30 MPa
$ 2049/MT
- Density: 1.01 g/cc
- Melt Flow: 1.0 g/10 min
- Hardness, Shore D: 34
- Tensile Strength, Ultimate: 8.30 MPa
- Elongation at Break: 560 %
$ 1767/MT
- Linear Mold Shrinkage: 0.0126 cm/cm
- Melt Flow: 2.6 g/10 min
- Hardness, Shore D: 51.1
- Tensile Strength, Ultimate: 18.6 MPa
- Elongation at Break: 156 %
$ 1923/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm
- Melt Flow: 15.8 g/10 min
- Hardness, Shore A: 60
- Tensile Strength, Ultimate: >= 3.62 MPa
$ 1500/MT
- Specific Gravity: 1.20 g/cc
- Hardness, Shore A: 71
- Tensile Strength at Break: 16.0 MPa
- Elongation at Break: 600 %
- Tear Strength: 45.6 kN/m
$ 1737/MT
- Density: 1.08 g/cc
- Melt Flow: 7.0 g/10 min
- Hardness, Shore D: 58
- Tensile Strength, Ultimate: >= 20.69 MPa
- Elongation at Break: >= 18 %
$ 2378/MT
- Density: 0.920 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 7.0 g/10 min
- Hardness, Shore A: 89
- Tensile Strength, Ultimate: 8.90 MPa
$ 1446/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Melt Flow: 10 g/10 min @Load 5.00 kg, Temperature 230 °C
- Hardness, Shore A: 68
$ 1990/MT
- Density: 1.20 g/cc
- Melt Flow: 30 - 50 g/10 min
- Hardness, Shore A: 75
- Tensile Strength, Ultimate: >= 3.00 MPa
- Elongation at Break: >= 250 %
$ 1662/MT
- Density: 1.16 - 1.22 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 37.5 g/10 min
- Hardness, Shore A: 60
- Tensile Strength, Ultimate: >= 3.62 MPa
$ 1491/MT
- Density: 0.870 g/cc
- Hardness, Shore D: 41
- Tensile Strength, Ultimate: >= 11.0 MPa
- Elongation at Break: >= 50 %
- Flexural Modulus: 0.0600 GPa
$ 1520/MT
- Density: 1.17 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Hardness, Shore A: 43
- Tensile Strength, Ultimate: >= 5.17 MPa
$ 1652/MT
- Density: 1.28 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 14 - 16 g/10 min
- Hardness, Shore A: 60
- Tensile Strength, Ultimate: >= 3.62 MPa
$ 2187/MT
- Density: 0.890 g/cc
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 2.8 g/10 min
- Hardness, Shore D: 46
- Tensile Strength, Ultimate: 12.8 MPa
$ 1615/MT
- Density: 0.890 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 1.8 g/10 min
- Hardness, Shore D: 41
- Tensile Strength, Ultimate: 12.3 MPa
$ 1738/MT
- Density: 0.910 g/cc
- Linear Mold Shrinkage: 0.0129 cm/cm
- Melt Flow: 7.5 g/10 min
- Hardness, Shore D: 51
- Tensile Strength, Ultimate: 17.2 MPa
$ 2289/MT
- Specific Gravity: 1.25 g/cc
- Melt Flow: 5.97 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 43
- Tensile Strength, Yield: 10.1 MPa
- Elongation at Break: 480 %
$ 1536/MT
- Specific Gravity: 0.962 g/cc
- Melt Flow: 9.55 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 86
- Tensile Strength, Ultimate: 8.41 MPa
- Elongation at Break: 820 %
$ 2119/MT
- Density: 0.900 g/cc
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 2.7 g/10 min
- Hardness, Shore D: 46
- Tensile Strength, Ultimate: 11.7 - 13.8 MPa
$ 1625/MT
- Density: 1.19 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 2.0 - 10 g/10 min
- Hardness, Shore A: 44
- Tensile Strength, Ultimate: >= 2.48 MPa
$ 1525/MT
- Density: 1.82 g/cc
- Melt Flow: 1.3 g/10 min
- Hardness, Shore A: 85
- Tensile Strength, Ultimate: 3.30 MPa
- Elongation at Break: 130 %
- Tear Strength: 23.6 kN/m
$ 1883/MT
- Specific Gravity: 0.940 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 56
- Tensile Strength, Yield: 16.5 MPa
$ 1764/MT
- Density: 0.918 g/cc
- Melt Flow: 18 g/10 min
- Hardness, Shore A: 56
- Tensile Strength, Ultimate: 2.90 MPa
- Elongation at Break: 820 %
- Tear Strength: 24.5 kN/m
$ 1672/MT
- Density: 0.910 g/cc
- Melt Flow: 9.0 g/10 min
- Hardness, Shore D: 55
- Tensile Strength, Ultimate: 20.7 MPa
- Elongation at Break: 1200 %
$ 1916/MT
- Density: 1.07 g/cc
- Melt Flow: 1.5 g/10 min
- Hardness, Shore A: 80
- Tensile Strength, Ultimate: 9.10 MPa
- Elongation at Break: 1600 %
$ 1460/MT
- Density: 0.910 g/cc
- Melt Flow: 6.0 - 12 g/10 min
- Hardness, Shore D: 41
- Tensile Strength, Ultimate: 10.3 - 14.5 MPa
- Elongation at Break: 500 - 700 %
$ 1469/MT
- Density: 1.00 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm
- Melt Flow: 6.0 g/10 min
- Hardness, Shore D: 38
- Tensile Strength, Ultimate: 12.0 MPa
$ 2421/MT
- Density: 0.940 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Melt Flow: 9.0 g/10 min
- Hardness, Shore D: 65
- Tensile Strength, Ultimate: 9.00 MPa
$ 1578/MT
- Density: 1.01 g/cc
- Linear Mold Shrinkage: 0.016 cm/cm
- Melt Flow: 1.0 - 3.0 g/10 min
- Hardness, Shore D: 54
- Tensile Strength, Ultimate: 14.3 MPa
$ 1575/MT
- Density: 0.890 g/cc
- Melt Flow: 2.0 g/10 min
- Hardness, Shore A: 64
- Tensile Strength, Ultimate: >= 9.38 MPa
- Elongation at Break: >= 625 %
- Tear Strength: >= 30.3 kN/m
$ 2126/MT
- Melt Flow: 9.0 g/10 min
- Hardness, Shore A: 50
- Tensile Strength, Ultimate: 11.9 MPa
- Elongation at Break: 850 %
- Flexural Modulus: 0.370 GPa
$ 2329/MT
- Density: 1.49 g/cc
- Linear Mold Shrinkage: 0.0052 cm/cm
- Melt Flow: 1.7 g/10 min
- Hardness, Shore A: 76
- Tensile Strength, Ultimate: 2.30 MPa
$ 2163/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 57
- Tensile Strength, Yield: 1.31 MPa
$ 1540/MT
- Specific Gravity: 0.892 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 91 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 59
- Tensile Strength, Yield: 7.45 MPa
$ 2463/MT
- Density: 1.075 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 2.0 - 5.0 g/10 min
- Hardness, Shore A: 50
- Tensile Strength, Ultimate: >= 3.62 MPa
$ 1569/MT
- Specific Gravity: 1.88 g/cc
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 77
- Tensile Strength, Yield: 2.76 MPa
- Elongation at Break: 500 %
$ 2131/MT
- Density: 0.910 g/cc
- Linear Mold Shrinkage: 0.016 cm/cm
- Melt Flow: 1.3 g/10 min
- Hardness, Shore A: 73
- Tensile Strength, Ultimate: >= 1.17 MPa
$ 1490/MT
- Specific Gravity: 1.09 g/cc
- Linear Mold Shrinkage: 0.010 - 0.030 cm/cm
- Melt Flow: 21 g/10 min @Load 10.0 kg, Temperature 190 °C
- Hardness, Shore A: 67
- Tensile Strength: 5.60 MPa
$ 1990/MT
- Specific Gravity: 0.920 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 43
- Tensile Strength, Ultimate: 13.4 MPa
$ 1996/MT
- Specific Gravity: 0.982 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 87
- Tensile Strength, Yield: 11.7 MPa
$ 1685/MT
- Density: 0.920 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 1.3 g/10 min
- Hardness, Shore A: 73
- Tensile Strength, Ultimate: >= 7.45 MPa
$ 1514/MT
- Density: 1.02 g/cc
- Melt Flow: 5.0 - 7.0 g/10 min
- Hardness, Shore A: 86
- Tensile Strength, Ultimate: 7.60 MPa
- Elongation at Break: 780 %
$ 1734/MT
- Specific Gravity: 0.892 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 96 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 45
- Tensile Strength, Yield: 2.95 MPa
$ 1832/MT
- Density: 1.83 g/cc
- Melt Flow: 5.0 g/10 min
- Hardness, Shore A: 82
- Tensile Strength, Ultimate: 2.90 MPa
- Elongation at Break: 600 %
$ 2180/MT
- Specific Gravity: 0.892 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 45
- Tensile Strength, Yield: 12.8 MPa
$ 1939/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 1.2 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 66
- Tensile Strength at Break: 10.3 MPa
$ 1542/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 67
- Tensile Strength, Yield: 1.82 MPa
$ 1982/MT
- Specific Gravity: 0.942 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 40
- Tensile Strength, Yield: 12.1 MPa
$ 1624/MT
- Density: 0.920 g/cc
- Linear Mold Shrinkage: 0.016 cm/cm
- Melt Flow: 1.0 - 5.0 g/10 min
- Hardness, Shore A: 73
- Tensile Strength, Ultimate: >= 0.740 MPa
$ 1497/MT
- Density: 0.920 g/cc
- Melt Flow: 2.0 g/10 min
- Hardness, Shore D: 45
- Tensile Strength, Ultimate: 14.5 MPa
- Elongation at Break: >= 1000 %
$ 1628/MT
- Specific Gravity: 1.00 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 5.5 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 85
- Tensile Strength, Yield: 10.9 MPa
$ 1636/MT
- Density: 0.900 g/cc
- Melt Flow: 2.0 g/10 min
- Hardness, Shore D: 45
- Tensile Strength, Ultimate: 14.5 MPa
- Elongation at Break: >= 1300 %
$ 1832/MT
- Density: 1.03 g/cc
- Melt Flow: 1.5 g/10 min
- Hardness, Shore A: 80
- Tensile Strength, Ultimate: 5.00 MPa
- Elongation at Break: 300 %
$ 1459/MT
- Specific Gravity: 0.882 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength, Yield: 29.0 MPa
$ 1672/MT
- Specific Gravity: 0.892 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 46
- Tensile Strength, Yield: 12.8 MPa
$ 2343/MT
- Density: 0.910 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm
- Melt Flow: 2.0 - 5.0 g/10 min
- Hardness, Shore A: 55
- Tensile Strength, Ultimate: 10.0 MPa
$ 1505/MT
- Specific Gravity: 0.972 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 2.8 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 89
- Tensile Strength, Ultimate: 10.0 MPa
$ 1646/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 33
- Tensile Strength, Yield: 5.50 MPa
$ 1923/MT
- Specific Gravity: 1.20 g/cc
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 45
- Tensile Strength, Yield: 1.17 MPa
- Tensile Strength, Yield: 5.00 MPa
$ 2500/MT
- Specific Gravity: 0.912 g/cc
- Linear Mold Shrinkage: 0.019 cm/cm
- Melt Flow: 7.5 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 72
- Tensile Strength, Yield: 6.76 MPa
$ 2116/MT
- Hardness, Shore A: 48
- Hardness, Shore A: 55
- Hardness, Shore A: 55
- Hardness, Shore A: 57
- Tensile Strength, Ultimate: 8.27 MPa
$ 2127/MT
- Density: 0.910 g/cc
- Linear Mold Shrinkage: 0.011 cm/cm
- Melt Flow: 8.0 g/10 min
- Hardness, Shore D: 40
- Tensile Strength, Ultimate: >= 10.13 MPa
$ 1546/MT
- Density: 0.890 g/cc
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 2.8 g/10 min
- Hardness, Shore D: 50
- Tensile Strength, Ultimate: 11.7 - 15.1 MPa
$ 1916/MT
- Density: 1.15 g/cc
- Hardness, Shore A: 89
- Tensile Strength, Ultimate: 11.2 MPa
- Elongation at Break: 600 %
- 300% Modulus: 0.00750 GPa
- Tear Strength: 56.0 kN/m
$ 1858/MT
- Specific Gravity: 0.932 g/cc
- Melt Flow: 172 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 19
- Tensile Strength, Ultimate: 2.18 MPa
- Elongation at Break: 940 %
- Tear Strength: 12.8 kN/m
$ 1698/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 12 g/10 min
- Hardness, Shore A: 55
$ 1549/MT
- Density: 0.910 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 1.6 g/10 min
- Hardness, Shore A: 73
- Tensile Strength, Ultimate: >= 10.62 MPa
$ 1695/MT
- Specific Gravity: 0.892 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 50
- Tensile Strength, Yield: 13.4 MPa
$ 1561/MT
- Specific Gravity: 1.89 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 14 g/10 min @Load 2.16 kg, Temperature 230 °C
- Ash: 65.6 %
- Hardness, Shore A: 80
$ 2113/MT
- Density: 1.06 g/cc
- Melt Flow: 5.0 g/10 min
- Hardness, Shore D: 54
- Tensile Strength, Ultimate: 17.9 MPa
- Elongation at Break: 260 %
$ 2108/MT
- Specific Gravity: 2.11 g/cc
- Melt Flow: 6.6 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 91
- Tensile Strength, Yield: 3.45 MPa
- Elongation at Break: 300 %
$ 1737/MT
- Specific Gravity: 0.890 g/cc
- Water Absorption: 0.040 %
- Melt Flow: 30 g/10 min @Load 2.16 kg, Temperature 230 °C
- Melt Flow: 52.6 g/10 min @Load 5.00 kg, Temperature 230 °C
- Hardness, Shore A: 3.0
$ 1591/MT
- Specific Gravity: 1.19 g/cc
- Linear Mold Shrinkage: 0.010 - 0.030 cm/cm
- Melt Flow: 54 g/10 min @Load 10.0 kg, Temperature 190 °C
- Hardness, Shore A: 83
- Tensile Strength: 15.4 MPa
$ 1730/MT
- Hardness, Shore A: 50
- Hardness, Shore A: 59
- Hardness, Shore A: 60
- Hardness, Shore A: 61
- Tensile Strength, Ultimate: 9.115 MPa
$ 1880/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 10 - 15 g/10 min
- Hardness, Shore A: 55
- Tensile Strength, Ultimate: >= 2.60 MPa
$ 1501/MT
- Hardness, Shore A: 64
- Hardness, Shore A: 70
- Hardness, Shore A: 71
- Hardness, Shore A: 73
- Tensile Strength, Ultimate: 7.58 MPa
$ 1739/MT
- Specific Gravity: 1.05 g/cc
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 44
- Tensile Strength, Yield: 11.7 MPa
- Tensile Strength, Yield: 15.9 MPa
$ 1858/MT
- Density: 1.18 g/cc
- Melt Flow: 10 g/10 min
- Hardness, Shore A: 79
- Tensile Strength, Ultimate: 6.20 MPa
- Elongation at Break: 850 %
$ 1666/MT
- Density: 1.10 g/cc
- Melt Flow: 2.0 g/10 min
- Hardness, Shore A: 78
- Tensile Strength, Ultimate: 8.30 MPa
- Elongation at Break: 1000 %
$ 1654/MT
- Density: 1.83 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 5.0 - 22 g/10 min
- Hardness, Shore A: 89
- Tensile Strength, Ultimate: >= 4.80 MPa
$ 1762/MT
- Density: 1.06 g/cc
- Melt Flow: 7.8 g/10 min
- Hardness, Shore D: 57
- Flexural Modulus: 1.00 GPa
- Gardner Impact: 15.3 J @Temperature -6.67 °C
- Tear Strength: 60.9 kN/m
$ 1548/MT
- Specific Gravity: 0.922 g/cc
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 5.8 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 51
- Tensile Strength at Break: 22.0 MPa
$ 1480/MT
- Specific Gravity: 1.12 g/cc
- Hardness, Shore A: 52
- Tensile Strength at Break: 7.10 MPa
- Elongation at Break: 470 %
- Tear Strength: 24.5 kN/m
$ 1652/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 32
- Tensile Strength, Yield: 8.62 MPa
$ 1514/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 1.2 g/10 min
- Hardness, Shore D: 59
- Tensile Strength, Ultimate: >= 3.62 MPa
$ 1754/MT
- Density: 1.85 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 5.0 g/10 min
- Hardness, Shore A: 89
- Tensile Strength, Ultimate: 4.80 MPa
$ 2149/MT
- Specific Gravity: 1.09 g/cc
- Linear Mold Shrinkage: 0.010 - 0.030 cm/cm
- Melt Flow: 20 g/10 min @Load 10.0 kg, Temperature 190 °C
- Hardness, Shore A: 62
- Tensile Strength: 5.10 MPa
$ 1455/MT
- Density: 1.01 g/cc
- Melt Flow: 3.9 g/10 min
- Hardness, Shore A: 83
- Tensile Strength, Ultimate: 14.0 MPa
- Elongation at Break: 725 %
$ 1907/MT
- Density: 0.960 g/cc
- Melt Flow: 5.4 g/10 min
- Hardness, Shore A: 88
- Tensile Strength, Ultimate: 9.20 MPa
- Elongation at Break: 505 %
$ 2543/MT
- Density: 1.06 g/cc
- Melt Flow: 3.0 g/10 min
- Hardness, Shore A: 39
- Tensile Strength, Ultimate: 3.90 MPa
- Elongation at Break: 778 %
- Tear Strength: 17.0 kN/m
$ 1942/MT
- Density: 1.03 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 5.0 - 10 g/10 min
- Hardness, Shore D: 50
- Tensile Strength, Ultimate: >= 10.3 MPa
$ 1488/MT
- Viscosity: 400 cP
- Viscosity: 400 cP
- Penetration: 245 - 275
$ 2255/MT
- Specific Gravity: 0.922 g/cc
- Melt Flow: 26 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 53
- Tensile Strength, Ultimate: 13.79 MPa
- Elongation at Break: 120 %
$ 1660/MT
- Specific Gravity: 0.890 g/cc
- Melt Flow: 50 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 32
- Tensile Strength, Yield: 5.86 MPa
- Elongation at Break: 690 %
$ 1445/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.0096 cm/cm
- Melt Flow: 4.0 g/10 min
- Hardness, Shore A: 87
- Tensile Strength, Ultimate: 9.00 MPa
$ 2598/MT
- Specific Gravity: 1.08 g/cc
- Hardness, Shore A: 56
- Hardness, Shore A: 60
- Tensile Strength at Break: 3.79 MPa
- Tensile Strength, Yield: 0.931 MPa @Strain 300 %
$ 1531/MT
- Specific Gravity: 0.920 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 39
- Tensile Strength, Ultimate: 12.4 MPa
$ 1583/MT
- Density: 1.079 g/cc
- Melt Flow: 6.0 g/10 min
- Hardness, Shore A: 80
- Tensile Strength, Ultimate: 6.70 MPa
- Elongation at Break: 730 %
- Tear Strength: 41.2 kN/m
$ 1608/MT
- Specific Gravity: 0.952 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 60
- Tensile Strength, Yield: 20.7 MPa
$ 1634/MT
- Specific Gravity: 0.902 g/cc
- Melt Flow: 26 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 46
- Tensile Strength, Yield: 3.79 MPa
- Elongation at Break: 760 %
$ 1707/MT
- Density: 0.880 g/cc
- Melt Flow: 1.0 g/10 min
- Hardness, Shore D: 65
- Tensile Strength, Ultimate: 29.0 MPa
- Elongation at Yield: 30 %
$ 1859/MT
- Hardness, Shore A: 70
- Hardness, Shore A: 72
- Hardness, Shore A: 73
- Hardness, Shore A: 75
- Tensile Strength, Ultimate: 7.58 MPa
$ 1764/MT
- Density: 1.046 g/cc
- Linear Mold Shrinkage: 0.0132 cm/cm
- Melt Flow: 0.60 g/10 min
- Hardness, Shore A: 83
- Tensile Strength, Ultimate: 11.8 MPa
$ 1921/MT
- Specific Gravity: 1.15 g/cc
- Hardness, Shore A: 82
- Tensile Strength at Break: 16.0 MPa
- Elongation at Break: 600 %
- Tear Strength: 45.6 kN/m
$ 1502/MT
- Hardness, Shore A: 56
- Hardness, Shore A: 58
- Hardness, Shore A: 58
- Hardness, Shore A: 60
- Tensile Strength, Ultimate: 7.58 MPa
$ 1521/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 62
$ 1571/MT
- Specific Gravity: 0.982 g/cc
- Melt Flow: 39.1 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 62
- Tensile Strength, Yield: 12.1 MPa
- Elongation at Break: 890 %
$ 1465/MT
- Density: 0.9164 g/cc
- Linear Mold Shrinkage: 0.016 cm/cm
- Melt Flow: 13 g/10 min
- Hardness, Shore A: 48
- Tensile Strength, Ultimate: 4.00 MPa
$ 1454/MT
- Density: 1.13 g/cc
- Hardness, Shore A: 30
- Hardness, Shore A: 31
- Hardness, Shore A: 32
- Hardness, Shore A: 33
$ 1465/MT
- Density: 0.940 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 8.8 g/10 min
- Hardness, Shore A: 93
- Tensile Strength, Ultimate: 9.40 MPa
$ 1602/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage: 0.010 - 0.030 cm/cm
- Melt Flow: 27 g/10 min @Load 10.0 kg, Temperature 190 °C
- Hardness, Shore A: 73
- Tensile Strength: 14.5 MPa
$ 2060/MT
- Density: 0.900 g/cc
- Melt Flow: 25 g/10 min
- Hardness, Shore A: 46
- Tensile Strength, Ultimate: 3.00 MPa
- Elongation at Break: >= 700 %
- Tear Strength: 17.5 kN/m
$ 1489/MT
- Specific Gravity: 1.16 g/cc
- Melt Flow: 0.50 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 69
- Tensile Strength, Yield: 2.07 MPa
- Tensile Strength, Yield: 7.58 MPa
$ 1577/MT
- Density: 1.20 g/cc
- Melt Flow: 16.1 g/10 min
- Hardness, Shore A: 59
- Tensile Strength, Ultimate: >= 3.62 MPa
- Elongation at Break: >= 500 %
- Tear Strength: >= 19.26 kN/m
$ 2410/MT
- Density: 1.15 g/cc
- Hardness, Shore A: 49
- Hardness, Shore A: 56
- Hardness, Shore A: 56
- Hardness, Shore A: 57
$ 2267/MT
- Specific Gravity: 1.07 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 33
$ 1699/MT
- Density: 1.17 - 1.23 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 6.0 - 12 g/10 min
- Hardness, Shore A: 60
- Tensile Strength, Ultimate: >= 3.62 MPa
$ 1938/MT
- Specific Gravity: 1.12 g/cc
$ 1673/MT
- Density: 1.17 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm
- Melt Flow: 10 - 14 g/10 min
- Hardness, Shore A: 62
- Tensile Strength, Ultimate: >= 4.00 MPa
$ 1472/MT
- Specific Gravity: 1.15 g/cc
- Hardness, Shore A: 55
- Tensile Strength at Break: 5.00 MPa
- Elongation at Break: 450 %
- Tear Strength: 24.5 kN/m
$ 2232/MT
- Specific Gravity: 1.06 g/cc
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 46
- Tensile Strength, Yield: 5.52 MPa
- Elongation at Break: 600 %
$ 2194/MT
- Density: 1.07 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 1.0 g/10 min
- Hardness, Shore D: 47
- Tensile Strength, Ultimate: >= 14.5 MPa
$ 1552/MT
- Specific Gravity: 1.08 g/cc
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 80
- Tensile Strength, Yield: 8.96 MPa
- Tensile Strength, Yield: 4.65 MPa @Strain 100 %
$ 1565/MT
- Density: 1.87 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 8.0 - 15 g/10 min
- Hardness, Shore D: 38
- Tensile Strength, Ultimate: >= 4.50 MPa
$ 1444/MT
- Density: 1.01 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Melt Flow: 2.0 g/10 min @Load 5.00 kg, Temperature 230 °C
- Hardness, Shore A: 80
$ 1510/MT
- Specific Gravity: 1.15 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 90
- Tensile Strength, Yield: 12.4 MPa
$ 1518/MT
- Specific Gravity: 1.18 g/cc
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 43
- Tensile Strength, Yield: 6.55 MPa
- Elongation at Break: 780 %
- Tear Strength: 22.8 kN/m
$ 1672/MT
- Specific Gravity: 1.13 g/cc
- Linear Mold Shrinkage: 0.020 - 0.040 cm/cm
- Melt Flow: 55 g/10 min @Load 10.0 kg, Temperature 190 °C
- Hardness, Shore A: 48
- Tensile Strength: 4.40 MPa
$ 2407/MT
- Density: 1.17 g/cc
- Melt Flow: 8.0 g/10 min
- Hardness, Shore D: 64
- Tensile Strength, Ultimate: >= 15.2 MPa
- Elongation at Break: >= 100 %
$ 2476/MT
- Specific Gravity: 0.912 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm
- Melt Flow: 3.8 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 47
- Tensile Strength, Yield: 18.8 MPa
$ 1664/MT
- Specific Gravity: 0.910 g/cc
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 35
- Tensile Strength, Yield: 0.862 MPa
- Tensile Strength, Yield: 6.89 MPa
$ 1922/MT
- Density: 1.07 g/cc
- Linear Mold Shrinkage: 0.0108 cm/cm
- Melt Flow: 1.8 g/10 min
- Hardness, Shore A: 88
- Tensile Strength, Ultimate: 9.00 MPa
$ 1646/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Melt Flow: 0.50 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 25
- Tensile Strength, Yield: 0.689 MPa
$ 1687/MT
- Hardness, Shore A: 55
- Hardness, Shore A: 56
- Hardness, Shore A: 57
- Tensile Strength, Ultimate: 9.729 MPa
- Tensile Strength, Ultimate: 10.17 MPa
$ 1983/MT
- Density: 1.165 g/cc
- Hardness, Shore A: 43
- Tensile Strength, Ultimate: >= 4.00 MPa
- Elongation at Break: >= 698 %
- Tear Strength: 17.4 kN/m
$ 1802/MT
- Density: 1.16 g/cc
- Melt Flow: 39 g/10 min
- Hardness, Shore A: 79
- Tensile Strength, Ultimate: 5.40 MPa
- Elongation at Break: 565 %
$ 1516/MT
- Hardness, Shore A: 77
- Hardness, Shore A: 82
- Hardness, Shore A: 83
- Hardness, Shore A: 85
- Tensile Strength, Ultimate: 6.61 MPa
$ 1569/MT
- Density: 0.9987 g/cc
- Melt Flow: 16 g/10 min
- Hardness, Shore D: 54.5
- Tensile Strength, Ultimate: 11.4 MPa
- Elongation at Break: 710 %
$ 1783/MT
- Density: 0.900 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 2.5 g/10 min
- Hardness, Shore D: 35
- Tensile Strength, Ultimate: 13.1 MPa
$ 2591/MT
- Density: 1.49 g/cc
- Linear Mold Shrinkage: 0.0080 cm/cm
- Melt Flow: 1.1 g/10 min
- Hardness, Shore A: 86
- Tensile Strength, Ultimate: 3.70 MPa
$ 1580/MT
- Specific Gravity: 1.23 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 76
- Tensile Strength, Yield: 3.31 MPa
$ 1476/MT
- Density: 0.8995 g/cc
- Linear Mold Shrinkage: 0.011 cm/cm
- Melt Flow: 0.95 g/10 min
- Hardness, Shore D: 58
- Tensile Strength, Ultimate: 26.3 MPa
Delivery TPE Multibase
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):
Country | 20’ Container | 40’ Container | 5,000 MT |
🇦🇺 Australia | $3345 | $4181 | $401400 |
🇦🇹 Austria | $2825 | $3531 | $339000 |
🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
🇦🇱 Albania | $2500 | $3125 | $300000 |
🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
🇦🇴 Angola | $2762.5 | $3453 | $331500 |
🇦🇷 Argentina | $3230 | $4038 | $387600 |
🇦🇲 Armenia | $2625 | $3281 | $315000 |
🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
🇧🇭 Bahrain | $3095 | $3869 | $371400 |
🇧🇾 Belarus | $2825 | $3531 | $339000 |
🇧🇿 Belize | $3155 | $3944 | $378600 |
🇧🇪 Belgium | $2575 | $3219 | $309000 |
🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
🇧🇴 Bolivia | $3230 | $4038 | $387600 |
🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
🇧🇷 Brazil | $3120 | $3900 | $374400 |
🇭🇺 Hungary | $2575 | $3219 | $309000 |
🇻🇪 Venezuela | $3230 | $4038 | $387600 |
🇻🇳 Vietnam | $2625 | $3281 | $315000 |
🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
🇬🇹 Guatemala | $3230 | $4038 | $387600 |
🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
🇩🇪 Germany | $2475 | $3094 | $297000 |
🇭🇳 Honduras | $3230 | $4038 | $387600 |
🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
🇬🇷 Greece | $2575 | $3219 | $309000 |
🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
🇩🇰 Denmark | $2400 | $3000 | $288000 |
🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
🇮🇱 Israel | $2625 | $3281 | $315000 |
🇮🇳 India | $3712.5 | $4641 | $445500 |
🇮🇩 Indonesia | $3095 | $3869 | $371400 |
🇯🇴 Jordan | $2625 | $3281 | $315000 |
🇮🇶 Iraq | $2625 | $3281 | $315000 |
🇮🇷 Iran | $3095 | $3869 | $371400 |
🇮🇪 Ireland | $2500 | $3125 | $300000 |
🇮🇸 Iceland | $2575 | $3219 | $309000 |
🇪🇸 Spain | $2500 | $3125 | $300000 |
🇮🇹 Italy | $2400 | $3000 | $288000 |
🇾🇪 Yemen | $2625 | $3281 | $315000 |
🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
🇰🇭 Cambodia | $3095 | $3869 | $371400 |
🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
🇨🇦 Canada | $3230 | $4038 | $387600 |
🇶🇦 Qatar | $2625 | $3281 | $315000 |
🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
🇨🇾 Cyprus | $2625 | $3281 | $315000 |
🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
🇨🇳 China | $3712.5 | $4641 | $445500 |
🇨🇴 Colombia | $3230 | $4038 | $387600 |
🇰🇷 Korea South | $2625 | $3281 | $315000 |
🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
🇨🇺 Cuba | $3230 | $4038 | $387600 |
🇰🇼 Kuwait | $2625 | $3281 | $315000 |
🇱🇻 Latvia | $2575 | $3219 | $309000 |
🇱🇧 Lebanon | $2625 | $3281 | $315000 |
🇱🇾 Libya | $2762.5 | $3453 | $331500 |
🇱🇹 Lithuania | $2500 | $3125 | $300000 |
🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
🇲🇾 Malaysia | $2625 | $3281 | $315000 |
🇲🇹 Malta | $2500 | $3125 | $300000 |
🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
🇲🇽 Mexico | $3155 | $3944 | $378600 |
🇲🇩 Moldova | $2400 | $3000 | $288000 |
🇲🇨 Monaco | $2475 | $3094 | $297000 |
🇲🇳 Mongolia | $2625 | $3281 | $315000 |
🇲🇲 Myanmar | $2625 | $3281 | $315000 |
🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
🇳🇵 Nepal | $2625 | $3281 | $315000 |
🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
🇳🇱 Netherlands | $2575 | $3219 | $309000 |
🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
🇳🇿 New Zealand | $3345 | $4181 | $401400 |
🇳🇴 Norway | $2400 | $3000 | $288000 |
🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
🇴🇲 Oman | $2625 | $3281 | $315000 |
🇵🇰 Pakistan | $2625 | $3281 | $315000 |
🇵🇦 Panama | $3230 | $4038 | $387600 |
🇵🇾 Paraguay | $3155 | $3944 | $378600 |
🇵🇪 Peru | $3230 | $4038 | $387600 |
🇵🇱 Poland | $2575 | $3219 | $309000 |
🇵🇹 Portugal | $2500 | $3125 | $300000 |
🇷🇺 Russia | $2575 | $3219 | $309000 |
🇷🇴 Romania | $2475 | $3094 | $297000 |
🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
🇷🇸 Serbia | $2575 | $3219 | $309000 |
🇸🇬 Singapore | $3095 | $3869 | $371400 |
🇸🇾 Syria | $3095 | $3869 | $371400 |
🇸🇰 Slovakia | $2500 | $3125 | $300000 |
🇸🇮 Slovenia | $2500 | $3125 | $300000 |
🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
🇺🇸 United States | $2902.5 | $3628 | $348300 |
🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
🇹🇭 Thailand | $2625 | $3281 | $315000 |
🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
🇹🇷 Turkey | $2625 | $3281 | $315000 |
🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
🇺🇦 Ukraine | $2500 | $3125 | $300000 |
🇺🇾 Uruguay | $2675 | $3344 | $321000 |
🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
🇵🇭 Philippines | $2625 | $3281 | $315000 |
🇫🇮 Finland | $2500 | $3125 | $300000 |
🇫🇷 France | $2575 | $3219 | $309000 |
🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
🇲🇪 Montenegro | $2575 | $3219 | $309000 |
🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
🇨🇱 Chile | $3355 | $4194 | $402600 |
🇨🇭 Switzerland | $2575 | $3219 | $309000 |
🇸🇪 Sweden | $2500 | $3125 | $300000 |
🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
🇪🇨 Ecuador | $3155 | $3944 | $378600 |
🇦🇸 American Samoa | $3345 | $4181 | $401400 |
🇸🇻 El Salvador | $3230 | $4038 | $387600 |
🇪🇪 Estonia | $2575 | $3219 | $309000 |
🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
🇯🇵 Japan | $3095 | $3869 | $371400 |
🇦🇩 Andorra | $2500 | $3125 | $300000 |
🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
🇧🇧 Barbados | $3230 | $4038 | $387600 |
🇧🇹 Bhutan | $3095 | $3869 | $371400 |
🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
🇧🇳 Brunei | $2625 | $3281 | $315000 |
🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
🇹🇩 Chad | $2762.5 | $3453 | $331500 |
🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
🇧🇯 Benin | $2762.5 | $3453 | $331500 |
🇩🇲 Dominica | $3230 | $4038 | $387600 |
🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
🇫🇯 Fiji | $3345 | $4181 | $401400 |
🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
🇰🇮 Kiribati | $3345 | $4181 | $401400 |
🇬🇩 Grenada | $3355 | $4194 | $402600 |
🇬🇺 Guam | $3345 | $4181 | $401400 |
🇬🇾 Guyana | $3230 | $4038 | $387600 |
🇭🇹 Haiti | $3120 | $3900 | $374400 |
🇯🇲 Jamaica | $3230 | $4038 | $387600 |
🇰🇵 Korea, North | $2625 | $3281 | $315000 |
🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
🇲🇻 Maldives | $2625 | $3281 | $315000 |
🇲🇱 Mali | $2762.5 | $3453 | $331500 |
🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
🇨🇼 Curaçao | $3230 | $4038 | $387600 |
🇦🇼 Aruba | $3120 | $3900 | $374400 |
🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
🇳🇪 Niger | $2762.5 | $3453 | $331500 |
🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
🇸🇲 San Marino | $2500 | $3125 | $300000 |
🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
🇸🇷 Suriname | $3230 | $4038 | $387600 |
🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
🇹🇬 Togo | $2762.5 | $3453 | $331500 |
🇹🇴 Tonga | $3345 | $4181 | $401400 |
🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts,
lng tankers for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.