Celanese VECTRA E471i LCP, 35% Specialty (Unverified Data**) price 1581 per MT

Physical Properties
Density
1.67 g/cc
Linear Mold Shrinkage, Flow
0.0010 cm/cm
Linear Mold Shrinkage, Transverse
0.0050 cm/cm

Mechanical Properties
Hardness, Rockwell M
55
Tensile Strength at Break
130 MPa
Elongation at Break
2.5 %
Elongation at Break
2.5 %
Tensile Modulus
13.8 GPa
Flexural Strength
180 MPa
Flexural Modulus
13.5 GPa
Compressive Strength
82.0 MPa
Compressive Modulus
11.0 GPa
Izod Impact, Notched (ISO)
14.0 kJ/m²
Izod Impact, Unnotched (ISO)
60.0 kJ/m²
Charpy Impact Unnotched
5.50 J/cm²
Charpy Impact, Notched
3.00 J/cm²

Thermal Properties
CTE, linear
6.00 µm/m-°C
CTE, linear, Transverse to Flow
18.0 µm/m-°C
Melting Point
335 °C
Deflection Temperature at 1.8 MPa (264 psi)
265 °C
Deflection Temperature at 8.0 MPa
220 °C
Vicat Softening Point
200 °C
Flammability, UL94
V-0

Electrical Properties
Volume Resistivity
1.00e+16 ohm-cm
Surface Resistance
>= 1.00e+15 ohm
Dielectric Constant
3.8 @Frequency 1.00e+6 Hz
Dielectric Strength
53.0 kV/mm
Dissipation Factor
0.031 @Frequency 1.00e+6 Hz

Processing Properties
Processing Temperature
20.0 - 30.0 °C
Processing Temperature
80.0 - 120 °C
Feed Temperature
60.0 - 80.0 °C
Zone 1
315 - 325 °C
Zone 2
320 - 330 °C
Zone 3
325 - 335 °C
Zone 4
330 - 340 °C
Die Temperature
335 - 345 °C
Melt Temperature
335 - 345 °C
Drying Temperature
150 - 170 °C
Dry Time
4.00 - 6.00 hour
Moisture Content
0.010 %
Dew Point
<= -40.0 °C
Injection Pressure
50.0 - 150 MPa
Hold Pressure
50.0 - 150 MPa
Back Pressure
3.00 MPa
Screw Speed
80 rpm @Diameter 40.0 mm
Screw Speed
140 rpm @Diameter 25.0 mm
Screw Speed
200 rpm @Diameter 16.0 mm
Hot-Working Temperature
335 - 345 °C

Descriptive Properties
Injection Speed
very fast
Longer pre-drying times/storage
100° C.
Short metering strokes
accumulator is recommended

Alternative products

Celanese VECTRA E471i LCP, 35% Specialty accurate 91%

$ 1651/MT

Density: 1.67 g/cc
Moisture Absorption: 0.00200 %
Water Absorption at Saturation: 0.0150 %
Linear Mold Shrinkage, Flow: 0.00100 cm/cm
Linear Mold Shrinkage, Transverse: 0.00500 cm/cm

Celanese FORTRON 1131L4 ITT PPS, 30% Glass Reinforced (Unverified Data**) accurate 59%

$ 2078/MT

Specific Gravity: 1.40 g/cc
Specific Gravity: 1.41 g/cc
Density: 1.40 g/cc
Density: 1.56 g/cc
Water Absorption: 0.020 %

Celanese FORTRON 1140L6 PPS, 40% Glass Reinforced (Unverified Data**) accurate 55%

$ 1551/MT

Specific Gravity: 1.60 g/cc
Specific Gravity: 1.61 g/cc
Density: 1.60 g/cc
Density: 1.65 g/cc
Water Absorption: 0.020 %

Celanese FORTRON 1140L7 PPS, 40% Glass Reinforced (Unverified Data**) accurate 67%

$ 2447/MT

Specific Gravity: 1.64 g/cc
Specific Gravity: 1.66 g/cc
Density: 1.64 g/cc
Density: 1.65 g/cc
Water Absorption: 0.020 %

Celanese Celstran® PP-GF30-0405 P10/16 PP, 30% Glass Reinforced accurate 55%

$ 1820/MT

Density: 1.13 g/cc
Tensile Strength at Break: 110 MPa
Tensile Strength: 70.0 MPa @Temperature 80.0 °C
Elongation at Break: 2.20 %
Elongation at Break: 2.30 % @Temperature 80.0 °C

Solvay Specialty Polymers Amodel® A-6135 HN Polyphthalamide (PPA) (Unverified Data**) accurate 59%

$ 1937/MT

Density: 1.45 g/cc
Filler Content: 35 %
Water Absorption: 0.29 % @Temperature 23.0 °C, Time 86400 sec
Water Absorption: 0.30 % @Time 86400 sec
Linear Mold Shrinkage, Flow: 0.0050 cm/cm

Celanese Celstran® PP-GF30-0403 P10/10 PP, 30% Glass Reinforced accurate 63%

$ 1541/MT

Density: 1.13 g/cc
Viscosity Test: 119 cm³/g
Linear Mold Shrinkage, Flow: 0.00220 cm/cm
Linear Mold Shrinkage, Transverse: 0.00350 cm/cm
Tensile Strength at Break: 110 MPa

Celanese FORTRON 1140L4 PPS, 40% Glass Reinforced (Unverified Data**) accurate 59%

$ 1642/MT

Specific Gravity: 1.60 g/cc
Specific Gravity: 1.66 g/cc
Density: 1.64 g/cc
Density: 1.64 g/cc
Density: 1.65 g/cc

Celanese FORTRON 1140L4 PPS, 40% Glass Reinforced accurate 59%

$ 2481/MT

Specific Gravity: 1.60 g/cc
Density: 0.000948 g/cc
Density: 1.64 g/cc
Density: 1.65 g/cc
Water Absorption: 0.0200 % @Temperature 22.8 °C

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, lng tanker ships for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

4 prices for Celanese VECTRA E471i LCP, 35% Specialty (Unverified Data**)

Seller from Taipei – 2021-03-14:

Seller from Taipei work with company: RTP Company, PolyOne Corporation, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1679 per MT

Seller from Bogotá – 2021-06-14:

Seller from Bogotá work with company: 3M, Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics)

Price: $1852 per MT

Seller from Miami – 2021-04-06:

Seller from Miami work with company: Solvay, SABIC Innovative Plastics (GE Plastics), Lehmann & Voss & Co., ALIMEX GmbH

Price: $2335 per MT

Seller from Miami – 2021-08-07:

Seller from Miami work with company: Solvay, Exxon Chemical, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1581 per MT