Hexion Bakelite™ PF 31.5 Phenolic Formaldehyde Resin, Improved Electrical Properties (discontinued **) price 1680 per MT

Physical Properties
Density
1.43 g/cc
Apparent Bulk Density
0.600 g/cc
Linear Mold Shrinkage, Flow
0.0040 cm/cm
Linear Mold Shrinkage, Flow
0.0080 cm/cm

Mechanical Properties
Ball Indentation Hardness
300 MPa
Flexural Strength
115 MPa
Flexural Modulus
8.00 GPa
Charpy Impact Unnotched
0.800 J/cm² @Temperature 23.0 °C
Charpy Impact, Notched
0.150 J/cm² @Temperature 23.0 °C

Thermal Properties
Maximum Service Temperature, Air
140 °C
Maximum Service Temperature, Air
180 °C
Deflection Temperature at 8.0 MPa
115 °C
Shrinkage
0.500 % @Temperature 110 °C
Shrinkage
1.00 % @Temperature 110 °C, Time 605000 sec

Electrical Properties
Volume Resistivity
1.00e+12 ohm-cm
Surface Resistance
1.00e+11 ohm
Dielectric Constant
6.0 @Frequency 100 Hz
Dielectric Strength
30.0 kV/mm @Thickness 1.00 mm
Dissipation Factor
0.10 @Frequency 100 Hz
Comparative Tracking Index
125 V

Processing Properties
Feed Temperature
60.0 - 75.0 °C
Nozzle Temperature
80.0 - 100 °C
Melt Temperature
80.0 - 100 °C
Mold Temperature
160 - 190 °C
Mold Temperature
160 - 190 °C
Injection Pressure
>= 15.0 MPa
Back Pressure
0.500 - 2.00 MPa
Cure Time
0.167 - 0.333 min
Cure Time
0.333 - 0.667 min

Descriptive Properties
Chromatic Spectrum
Subdued Colors
Creep Rupture Strength
Good
Holding Pressure
Approximately 40-60% of injection pressure
Media Resistance
Good
Moisture Absorption
35 mg
Reserves by Peak Temperature
High
Thermal Expansion
Slight

Alternative products

Hexion Bakelite™ PF 2137 Phenolic Formaldehyde Resin, High Surface Quality, Dishwasher Proof (discontinued ** accurate 58%

$ 1821/MT

Density: 1.42 g/cc
Apparent Bulk Density: 0.620 g/cc
Linear Mold Shrinkage, Flow: 0.0040 cm/cm
Linear Mold Shrinkage, Flow: 0.0090 cm/cm
Ball Indentation Hardness: 350 MPa

EMS-Grivory Grivory® XE 4108 black 9992 PA612-GF50 accurate 58%

$ 1602/MT

Density: 1.52 g/cc
Water Absorption: 1.6 %
Moisture Absorption: 0.700 %
Linear Mold Shrinkage, Flow: 0.0030 cm/cm
Linear Mold Shrinkage, Transverse: 0.011 cm/cm

Hexion Bakelite™ PF 12404 Phenolic Formaldehyde Resin, High Surface Quality, Low Shrinkage (discontinued **)& accurate 64%

$ 2233/MT

Density: 1.50 g/cc
Apparent Bulk Density: 0.650 g/cc
Linear Mold Shrinkage, Flow: 0.0080 cm/cm
Flexural Strength: 80.0 MPa
Flexural Modulus: 8.00 GPa

Hexion Bakelite™ PF 85 Phenolic Formaldehyde Resin, UL Listed (discontinued **) accurate 70%

$ 1872/MT

Density: 1.37 g/cc
Apparent Bulk Density: 0.580 g/cc
Linear Mold Shrinkage, Flow: 0.0020 cm/cm
Linear Mold Shrinkage, Flow: 0.0080 cm/cm
Ball Indentation Hardness: 300 MPa

Hexion Bakelite™ PF 2874 Phenolic Formaldehyde Resin, Low Shrinkage, Improved Electrical Properties, UL Listed, High Mechanical Strength accurate 64%

$ 1880/MT

Density: 1.57 g/cc
Apparent Bulk Density: 0.700 g/cc
Linear Mold Shrinkage, Flow: 0.0019 cm/cm
Linear Mold Shrinkage, Flow: 0.0045 cm/cm
Ball Indentation Hardness: 400 MPa

Hexion Bakelite™ PF 31.9 Phenolic Formaldehyde Resin, Ammonia Free (discontinued **) accurate 93%

$ 1663/MT

Density: 1.43 g/cc
Apparent Bulk Density: 0.600 g/cc
Linear Mold Shrinkage, Flow: 0.0045 cm/cm
Linear Mold Shrinkage, Flow: 0.0080 cm/cm
Flexural Strength: 110 MPa

Hexion Bakelite™ PF 38110 Phenolic Formaldehyde Resin, High Surface Quality (discontinued **) accurate 64%

$ 1702/MT

Density: 1.36 g/cc
Apparent Bulk Density: 0.650 g/cc
Linear Mold Shrinkage, Flow: 0.0065 cm/cm
Flexural Strength: 90.0 MPa
Flexural Modulus: 7.50 GPa

Hexion Bakelite™ PF 2774 Phenolic Formaldehyde Resin, Dishwasher Proof, Improved Electrical Properties, Low Shrinkage, UL Listed accurate 70%

$ 1861/MT

Density: 1.72 g/cc
Apparent Bulk Density: 0.750 g/cc
Linear Mold Shrinkage, Flow: 0.0010 cm/cm
Linear Mold Shrinkage, Flow: 0.0030 cm/cm
Ball Indentation Hardness: 425 MPa

Hexion Bakelite™ PF 31 Phenolic Formaldehyde Resin, UL Listed (discontinued **) accurate 70%

$ 2167/MT

Density: 1.42 g/cc
Apparent Bulk Density: 0.630 g/cc
Linear Mold Shrinkage, Flow: 0.0040 cm/cm
Linear Mold Shrinkage, Flow: 0.0080 cm/cm
Ball Indentation Hardness: 325 MPa

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, container ships for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

4 prices for Hexion Bakelite™ PF 31.5 Phenolic Formaldehyde Resin, Improved Electrical Properties (discontinued **)

Seller from Karachi – 2021-03-10:

Seller from Karachi work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1680 per MT

Seller from Hanoi – 2021-04-27:

Seller from Hanoi work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1941 per MT

Seller from Guangzhou – 2021-06-23:

Seller from Guangzhou work with company: 3M, SABIC Innovative Plastics (GE Plastics), LG Chemical, ALIMEX GmbH

Price: $1764 per MT

Seller from New York – 2021-05-07:

Seller from New York work with company: 3M, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1948 per MT