Hexion Bakelite™ PF 2874 Phenolic Formaldehyde Resin, Low Shrinkage, Improved Electrical Properties, UL Listed, High Mechanical Strength price 1880 per MT

Physical Properties
Density
1.57 g/cc
Apparent Bulk Density
0.700 g/cc
Linear Mold Shrinkage, Flow
0.0019 cm/cm
Linear Mold Shrinkage, Flow
0.0045 cm/cm

Mechanical Properties
Ball Indentation Hardness
400 MPa
Tensile Strength at Break
65.0 MPa
Tensile Modulus
10.5 GPa
Flexural Strength
125 MPa
Flexural Modulus
10.5 GPa
Compressive Strength
230 MPa
Charpy Impact Unnotched
0.900 J/cm² @Temperature 23.0 °C
Charpy Impact, Notched
0.200 J/cm² @Temperature 23.0 °C

Thermal Properties
Maximum Service Temperature, Air
170 °C
Maximum Service Temperature, Air
230 °C
Deflection Temperature at 8.0 MPa
155 °C
UL RTI, Electrical
150 °C @Thickness 0.750 mm
UL RTI, Mechanical with Impact
150 °C @Thickness 0.750 mm
UL RTI, Mechanical without Impact
150 °C @Thickness 0.750 mm
Flammability, UL94
V-0 @Thickness 0.750 mm
Shrinkage
0.180 % @Temperature 110 °C
Shrinkage
0.250 % @Temperature 110 °C, Time 605000 sec

Electrical Properties
Volume Resistivity
1.00e+12 ohm-cm
Surface Resistance
1.00e+11 ohm
Dielectric Constant
8.0 @Frequency 100 Hz
Dielectric Strength
30.0 kV/mm @Thickness 1.00 mm
Dissipation Factor
0.20 @Frequency 100 Hz
Arc Resistance
130 - 135 sec
Comparative Tracking Index
175 V
Hot Wire Ignition, HWI
>= 120 sec @Thickness 0.750 mm
High Amp Arc Ignition, HAI
>= 120 arcs @Thickness 0.750 mm
High Voltage Arc-Tracking Rate, HVTR
0.000 - 10.0 mm/min @Thickness 3.00 mm

Processing Properties
Feed Temperature
60.0 - 75.0 °C
Nozzle Temperature
80.0 - 100 °C
Melt Temperature
80.0 - 100 °C
Mold Temperature
160 - 190 °C
Mold Temperature
160 - 190 °C
Injection Pressure
>= 15.0 MPa
Back Pressure
0.500 - 2.00 MPa
Cure Time
0.167 - 0.333 min
Cure Time
0.333 - 0.667 min

Descriptive Properties
Chromatic Spectrum
All Colors
Creep Rupture Strength
Very Good
Holding Pressure
Approximately 40-60% of injection pressure
Media Resistance
Very Good
Moisture Absorption
20 mg
Reserves by Peak Temperature
Very High
Thermal Expansion
Very Slight

Alternative products

Hexion Bakelite™ PF 13 Phenolic Formaldehyde Resin, UL Listed (discontinued **) accurate 53%

$ 2057/MT

Density: 1.85 g/cc
Apparent Bulk Density: 0.650 g/cc
Linear Mold Shrinkage, Flow: -0.000100 cm/cm
Ball Indentation Hardness: 425 MPa
Flexural Strength: 85.0 MPa

Hexion Bakelite™ PF 6507 Phenolic Formaldehyde Resin, Elasticized, Low Shrinkage, Resistant to High Temperatures, High Mechanical Strength accurate 61%

$ 1653/MT

Density: 1.58 g/cc
Apparent Bulk Density: 0.710 g/cc
Linear Mold Shrinkage, Flow: 0.0015 cm/cm
Ball Indentation Hardness: 250 MPa
Tensile Strength at Break: 85.0 MPa

Hexion Bakelite™ PF 4155 Phenolic Formaldehyde Resin, Resistant to High Temperatures, Improved Electrical Properties, Low Shrinkage, High Mechanical Strength accurate 68%

$ 1942/MT

Density: 1.78 g/cc
Apparent Bulk Density: 0.730 g/cc
Linear Mold Shrinkage, Flow: -0.000100 cm/cm
Linear Mold Shrinkage, Flow: 0.0010 cm/cm
Ball Indentation Hardness: 350 MPa

SABIC Innovative Plastics LNP THERMOTUF OF006I PPS - Linear accurate 45%

$ 1642/MT

Density: 1.48 g/cc
Density: 1.486 g/cc
Moisture Absorption: 0.0400 %
Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Time 86400 sec
Linear Mold Shrinkage, Flow: 0.0023 cm/cm @Time 86400 sec

Hexion Bakelite™ PF 2774 Phenolic Formaldehyde Resin, Dishwasher Proof, Improved Electrical Properties, Low Shrinkage, UL Listed accurate 61%

$ 1861/MT

Density: 1.72 g/cc
Apparent Bulk Density: 0.750 g/cc
Linear Mold Shrinkage, Flow: 0.0010 cm/cm
Linear Mold Shrinkage, Flow: 0.0030 cm/cm
Ball Indentation Hardness: 425 MPa

SABIC Innovative Plastics LNP LUBRICOMP WFL36 PBT (Asia Pacific) accurate 45%

$ 1900/MT

Density: 1.68 g/cc
Density: 1.68 g/cc
Moisture Absorption: 0.0400 %
Moisture Absorption: 0.0400 %
Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec

SABIC Innovative Plastics LNP Thermocomp ZF008 PPO accurate 45%

$ 1955/MT

Density: 1.38 g/cc
Density: 1.38 g/cc
Moisture Absorption at Equilibrium: 0.070 %
Moisture Absorption at Equilibrium: 0.070 % @Time 86400 sec
Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec

Hexion Bakelite™ PF 2535 Phenolic Formaldehyde Resin, High Surface Quality, Dishwasher Proof (discontinued ** accurate 53%

$ 1571/MT

Density: 1.50 g/cc
Apparent Bulk Density: 0.700 g/cc
Linear Mold Shrinkage, Flow: 0.0075 cm/cm
Tensile Strength at Break: 55.0 MPa
Tensile Modulus: 8.50 GPa

SABIC Innovative Plastics LNP LUBRICOMP WFL36 PBT accurate 45%

$ 2377/MT

Density: 1.68 g/cc
Density: 1.68 g/cc
Moisture Absorption: 0.0400 %
Moisture Absorption: 0.0400 %
Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, ships for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

4 prices for Hexion Bakelite™ PF 2874 Phenolic Formaldehyde Resin, Low Shrinkage, Improved Electrical Properties, UL Listed, High Mechanical Strength

Seller from Philadelphia – 2021-08-09:

Seller from Philadelphia work with company: 3M, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2350 per MT

Seller from Sūrat – 2021-03-17:

Seller from Sūrat work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), Lehmann & Voss & Co.

Price: $1880 per MT

Seller from New York – 2021-07-10:

Seller from New York work with company: 3M, RTP Company, PolyOne Corporation, SABIC Innovative Plastics (GE Plastics)

Price: $2196 per MT

Seller from Belo Horizonte – 2021-04-02:

Seller from Belo Horizonte work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2103 per MT

Would you like to sell Hexion Bakelite™ PF 2874 Phenolic Formaldehyde Resin, Low Shrinkage, Improved Electrical Properties, UL Listed, High Mechanical Strength?