Hexion Bakelite™ PF 6507 Phenolic Formaldehyde Resin, Elasticized, Low Shrinkage, Resistant to High Temperatures, High Mechanical Strength price 1653 per MT

Physical Properties
Density
1.58 g/cc
Apparent Bulk Density
0.710 g/cc
Linear Mold Shrinkage, Flow
0.0015 cm/cm

Mechanical Properties
Ball Indentation Hardness
250 MPa
Tensile Strength at Break
85.0 MPa
Tensile Modulus
10.5 GPa
Flexural Strength
140 MPa
Flexural Modulus
10.5 GPa
Compressive Strength
180 MPa
Charpy Impact Unnotched
1.50 J/cm² @Temperature 23.0 °C
Charpy Impact, Notched
0.350 J/cm² @Temperature 23.0 °C

Thermal Properties
Maximum Service Temperature, Air
165 °C
Maximum Service Temperature, Air
220 °C
Deflection Temperature at 8.0 MPa
170 °C
Shrinkage
0.150 % @Temperature 110 °C, Time 605000 sec

Electrical Properties
Volume Resistivity
1.00e+12 ohm-cm
Surface Resistance
1.00e+11 ohm
Dielectric Constant
7.0 @Frequency 100 Hz
Dielectric Strength
25.0 kV/mm @Thickness 1.00 mm
Dissipation Factor
0.11 @Frequency 100 Hz
Comparative Tracking Index
150 V

Processing Properties
Feed Temperature
60.0 - 75.0 °C
Nozzle Temperature
80.0 - 100 °C
Melt Temperature
80.0 - 100 °C
Mold Temperature
160 - 190 °C
Mold Temperature
160 - 190 °C
Injection Pressure
>= 15.0 MPa
Back Pressure
0.500 - 2.00 MPa
Cure Time
0.167 - 0.333 min
Cure Time
0.333 - 0.667 min

Descriptive Properties
Chromatic Spectrum
All Colors
Creep Rupture Strength
Very Good
Holding Pressure
Approximately 40-60% of injection pressure
Media Resistance
Very Good
Moisture Absorption
13 mg
Reserves by Peak Temperature
Very High
Thermal Expansion
Very Slight

Alternative products

Hexion Bakelite™ PF 4260 Phenolic Formaldehyde Resin, Resistant to High Temperatures, Improved Electrical Properties, Low Shrinkage, High Mechanical Strength accurate 53%

$ 1677/MT

Density: 1.69 g/cc
Apparent Bulk Density: 0.710 g/cc
Linear Mold Shrinkage, Flow: 0.00070 cm/cm
Ball Indentation Hardness: 425 MPa
Tensile Strength at Break: 85.0 MPa

Hexion Bakelite™ PF 85 Phenolic Formaldehyde Resin, UL Listed (discontinued **) accurate 45%

$ 1872/MT

Density: 1.37 g/cc
Apparent Bulk Density: 0.580 g/cc
Linear Mold Shrinkage, Flow: 0.0020 cm/cm
Linear Mold Shrinkage, Flow: 0.0080 cm/cm
Ball Indentation Hardness: 300 MPa

Hexion Bakelite™ PF 31.5 Phenolic Formaldehyde Resin, Improved Electrical Properties (discontinued **) accurate 45%

$ 1680/MT

Density: 1.43 g/cc
Apparent Bulk Density: 0.600 g/cc
Linear Mold Shrinkage, Flow: 0.0040 cm/cm
Linear Mold Shrinkage, Flow: 0.0080 cm/cm
Ball Indentation Hardness: 300 MPa

Hexion Bakelite™ PF 2874 Phenolic Formaldehyde Resin, Low Shrinkage, Improved Electrical Properties, UL Listed, High Mechanical Strength accurate 61%

$ 1880/MT

Density: 1.57 g/cc
Apparent Bulk Density: 0.700 g/cc
Linear Mold Shrinkage, Flow: 0.0019 cm/cm
Linear Mold Shrinkage, Flow: 0.0045 cm/cm
Ball Indentation Hardness: 400 MPa

Hexion Bakelite™ PF 31.9 Phenolic Formaldehyde Resin, Ammonia Free (discontinued **) accurate 45%

$ 1663/MT

Density: 1.43 g/cc
Apparent Bulk Density: 0.600 g/cc
Linear Mold Shrinkage, Flow: 0.0045 cm/cm
Linear Mold Shrinkage, Flow: 0.0080 cm/cm
Flexural Strength: 110 MPa

Hexion Bakelite™ PF 38110 Phenolic Formaldehyde Resin, High Surface Quality (discontinued **) accurate 45%

$ 1702/MT

Density: 1.36 g/cc
Apparent Bulk Density: 0.650 g/cc
Linear Mold Shrinkage, Flow: 0.0065 cm/cm
Flexural Strength: 90.0 MPa
Flexural Modulus: 7.50 GPa

Hexion Bakelite™ PF 2774 Phenolic Formaldehyde Resin, Dishwasher Proof, Improved Electrical Properties, Low Shrinkage, UL Listed accurate 61%

$ 1861/MT

Density: 1.72 g/cc
Apparent Bulk Density: 0.750 g/cc
Linear Mold Shrinkage, Flow: 0.0010 cm/cm
Linear Mold Shrinkage, Flow: 0.0030 cm/cm
Ball Indentation Hardness: 425 MPa

EMS-Grivory Grivory® HT2V-3X V0 black 9021 PA6T/66-GF30 accurate 45%

$ 1913/MT

Density: 1.43 g/cc
Water Absorption: 3.5 %
Moisture Absorption: 1.30 %
Linear Mold Shrinkage, Flow: 0.0010 cm/cm
Linear Mold Shrinkage, Transverse: 0.0090 cm/cm

Hexion Bakelite™ PF 6506 Phenolic Formaldehyde Resin, Low Shrinkage, Resistant to High Temperatures, UL Listed &nbs accurate 68%

$ 1603/MT

Density: 1.72 g/cc
Apparent Bulk Density: 0.740 g/cc
Linear Mold Shrinkage, Flow: 0.0020 cm/cm
Ball Indentation Hardness: 500 MPa
Flexural Strength: 140 MPa

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, used cruise ships for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: a.kutuzov@plastic-price.com

Work with plastics from August, 2015

3 prices for Hexion Bakelite™ PF 6507 Phenolic Formaldehyde Resin, Elasticized, Low Shrinkage, Resistant to High Temperatures, High Mechanical Strength

Seller from Saint Petersburg – 2021-05-05:

Seller from Saint Petersburg work with company: Solvay, SABIC Innovative Plastics (GE Plastics), Lehmann & Voss & Co., ALIMEX GmbH

Price: $2175 per MT

Seller from Kolkata – 2021-03-15:

Seller from Kolkata work with company: 3M, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2417 per MT

Seller from Karachi – 2021-06-17:

Seller from Karachi work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1653 per MT

Would you like to sell Hexion Bakelite™ PF 6507 Phenolic Formaldehyde Resin, Elasticized, Low Shrinkage, Resistant to High Temperatures, High Mechanical Strength?