Hexion Bakelite™ PF 4260 Phenolic Formaldehyde Resin, Resistant to High Temperatures, Improved Electrical Properties, Low Shrinkage, High Mechanical Strength price 1677 per MT

Physical Properties
Density
1.69 g/cc
Apparent Bulk Density
0.710 g/cc
Linear Mold Shrinkage, Flow
0.00070 cm/cm

Mechanical Properties
Ball Indentation Hardness
425 MPa
Tensile Strength at Break
85.0 MPa
Tensile Modulus
13.5 GPa
Flexural Strength
150 MPa
Flexural Modulus
12.0 GPa
Compressive Strength
250 MPa
Charpy Impact Unnotched
1.10 J/cm² @Temperature 23.0 °C
Charpy Impact, Notched
0.350 J/cm² @Temperature 23.0 °C

Thermal Properties
Deflection Temperature at 8.0 MPa
175 °C
Shrinkage
0.0700 % @Temperature 110 °C

Electrical Properties
Volume Resistivity
1.00e+12 ohm-cm
Surface Resistance
1.00e+11 ohm
Dielectric Constant
6.0 @Frequency 100 Hz
Dielectric Strength
35.0 kV/mm @Thickness 1.00 mm
Dissipation Factor
0.060 @Frequency 100 Hz

Processing Properties
Feed Temperature
60.0 - 75.0 °C
Nozzle Temperature
80.0 - 100 °C
Melt Temperature
80.0 - 100 °C
Mold Temperature
160 - 190 °C
Mold Temperature
160 - 190 °C
Injection Pressure
>= 15.0 MPa
Back Pressure
0.500 - 2.00 MPa
Cure Time
0.167 - 0.333 min
Cure Time
0.333 - 0.667 min

Descriptive Properties
Chromatic Spectrum
All Colors
Creep Rupture Strength
Very Good
Holding Pressure
Approximately 40-60% of injection pressure
Media Resistance
Very Good
Moisture Absorption
11 mg
Reserves by Peak Temperature
Very High
Thermal Expansion
Very Slight

Alternative products

Hexion Bakelite™ PF 1107 Phenolic Formaldehyde Resin, Low Shrinkage, Resistant to High Temperatures (disconti accurate 66%

$ 1747/MT

Density: 2.00 g/cc
Apparent Bulk Density: 0.970 g/cc
Linear Mold Shrinkage, Flow: 0.00 cm/cm
Linear Mold Shrinkage, Flow: 0.0016 cm/cm
Ball Indentation Hardness: 450 MPa

Hexion Bakelite™ MP 4165 Melamine Phenolic Resin, Copper Adhesive, Low Shrinkage, High Mechanical Strength (d accurate 77%

$ 1445/MT

Density: 1.81 g/cc
Apparent Bulk Density: 0.700 g/cc
Linear Mold Shrinkage, Flow: -0.000500 cm/cm
Linear Mold Shrinkage, Flow: 0.00040 cm/cm
Ball Indentation Hardness: 300 MPa

Hexion Bakelite™ PF 6507 Phenolic Formaldehyde Resin, Elasticized, Low Shrinkage, Resistant to High Temperatures, High Mechanical Strength accurate 77%

$ 1653/MT

Density: 1.58 g/cc
Apparent Bulk Density: 0.710 g/cc
Linear Mold Shrinkage, Flow: 0.0015 cm/cm
Ball Indentation Hardness: 250 MPa
Tensile Strength at Break: 85.0 MPa

Hexion Bakelite™ PF 4155 Phenolic Formaldehyde Resin, Resistant to High Temperatures, Improved Electrical Properties, Low Shrinkage, High Mechanical Strength accurate 66%

$ 1942/MT

Density: 1.78 g/cc
Apparent Bulk Density: 0.730 g/cc
Linear Mold Shrinkage, Flow: -0.000100 cm/cm
Linear Mold Shrinkage, Flow: 0.0010 cm/cm
Ball Indentation Hardness: 350 MPa

Hexion Bakelite™ PF 85 Phenolic Formaldehyde Resin, UL Listed (discontinued **) accurate 66%

$ 1872/MT

Density: 1.37 g/cc
Apparent Bulk Density: 0.580 g/cc
Linear Mold Shrinkage, Flow: 0.0020 cm/cm
Linear Mold Shrinkage, Flow: 0.0080 cm/cm
Ball Indentation Hardness: 300 MPa

Hexion Bakelite™ PF 2874 Phenolic Formaldehyde Resin, Low Shrinkage, Improved Electrical Properties, UL Listed, High Mechanical Strength accurate 66%

$ 1880/MT

Density: 1.57 g/cc
Apparent Bulk Density: 0.700 g/cc
Linear Mold Shrinkage, Flow: 0.0019 cm/cm
Linear Mold Shrinkage, Flow: 0.0045 cm/cm
Ball Indentation Hardness: 400 MPa

Hexion Bakelite™ PF 2774 Phenolic Formaldehyde Resin, Dishwasher Proof, Improved Electrical Properties, Low Shrinkage, UL Listed accurate 66%

$ 1861/MT

Density: 1.72 g/cc
Apparent Bulk Density: 0.750 g/cc
Linear Mold Shrinkage, Flow: 0.0010 cm/cm
Linear Mold Shrinkage, Flow: 0.0030 cm/cm
Ball Indentation Hardness: 425 MPa

Hexion Bakelite™ PF 2535 Phenolic Formaldehyde Resin, High Surface Quality, Dishwasher Proof (discontinued ** accurate 66%

$ 1571/MT

Density: 1.50 g/cc
Apparent Bulk Density: 0.700 g/cc
Linear Mold Shrinkage, Flow: 0.0075 cm/cm
Tensile Strength at Break: 55.0 MPa
Tensile Modulus: 8.50 GPa

Hexion Bakelite™ 151733 Phenolic Formaldehyde Resin (discontinued **) accurate 66%

$ 1729/MT

Density: 1.45 g/cc
Apparent Bulk Density: 0.640 g/cc
Linear Mold Shrinkage, Flow: 0.0076 cm/cm
Tensile Strength at Break: 50.0 MPa
Tensile Modulus: 7.50 GPa

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, oil ship for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

1 prices for Hexion Bakelite™ PF 4260 Phenolic Formaldehyde Resin, Resistant to High Temperatures, Improved Electrical Properties, Low Shrinkage, High Mechanical Strength

Seller from Ōsaka – 2021-07-18:

Seller from Ōsaka work with company: Celanese Corporation, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1677 per MT

Would you like to sell Hexion Bakelite™ PF 4260 Phenolic Formaldehyde Resin, Resistant to High Temperatures, Improved Electrical Properties, Low Shrinkage, High Mechanical Strength?