Hexion Bakelite™ PF 2535 Phenolic Formaldehyde Resin, High Surface Quality, Dishwasher Proof (discontinued ** price 1571 per MT

Physical Properties
Density
1.50 g/cc
Apparent Bulk Density
0.700 g/cc
Linear Mold Shrinkage, Flow
0.0075 cm/cm

Mechanical Properties
Tensile Strength at Break
55.0 MPa
Tensile Modulus
8.50 GPa
Flexural Strength
90.0 MPa
Flexural Modulus
8.00 GPa
Compressive Strength
225 MPa
Charpy Impact Unnotched
0.550 J/cm² @Temperature 23.0 °C
Charpy Impact, Notched
0.150 J/cm² @Temperature 23.0 °C

Thermal Properties
Maximum Service Temperature, Air
150 °C
Maximum Service Temperature, Air
230 °C
Deflection Temperature at 8.0 MPa
115 °C
Shrinkage
0.500 % @Temperature 110 °C, Time 605000 sec

Electrical Properties
Volume Resistivity
1.00e+12 ohm-cm
Surface Resistance
1.00e+11 ohm
Dielectric Constant
11 @Frequency 100 Hz
Dissipation Factor
0.25 @Frequency 100 Hz

Processing Properties
Feed Temperature
60.0 - 75.0 °C
Nozzle Temperature
80.0 - 100 °C
Melt Temperature
80.0 - 100 °C
Mold Temperature
160 - 190 °C
Mold Temperature
160 - 190 °C
Injection Pressure
>= 15.0 MPa
Back Pressure
0.500 - 2.00 MPa
Cure Time
0.167 - 0.333 min
Cure Time
0.333 - 0.667 min

Descriptive Properties
Chromatic Spectrum
All Colors
Creep Rupture Strength
Very Good
Holding Pressure
Approximately 40-60% of injection pressure
Media Resistance
Very Good
Moisture Absorption
30 mg
Reserves by Peak Temperature
Very High
Thermal Expansion
Very Slight

Alternative products

Hexion Bakelite™ PF 13 Phenolic Formaldehyde Resin, UL Listed (discontinued **) accurate 57%

$ 2057/MT

Density: 1.85 g/cc
Apparent Bulk Density: 0.650 g/cc
Linear Mold Shrinkage, Flow: -0.000100 cm/cm
Ball Indentation Hardness: 425 MPa
Flexural Strength: 85.0 MPa

BASF Ultramid® 8333G HI 33% Glass Filled PA6 (Dry) accurate 57%

$ 1528/MT

Density: 1.16 g/cc
Density: 1.34 g/cc
Water Absorption: 0.90 %
Water Absorption: 5.5 %
Moisture Absorption at Equilibrium: 1.5 %

Hexion Bakelite™ PF 31.5 Phenolic Formaldehyde Resin, Improved Electrical Properties (discontinued **) accurate 57%

$ 1680/MT

Density: 1.43 g/cc
Apparent Bulk Density: 0.600 g/cc
Linear Mold Shrinkage, Flow: 0.0040 cm/cm
Linear Mold Shrinkage, Flow: 0.0080 cm/cm
Ball Indentation Hardness: 300 MPa

Hexion Bakelite™ PF 2874 Phenolic Formaldehyde Resin, Low Shrinkage, Improved Electrical Properties, UL Listed, High Mechanical Strength accurate 57%

$ 1880/MT

Density: 1.57 g/cc
Apparent Bulk Density: 0.700 g/cc
Linear Mold Shrinkage, Flow: 0.0019 cm/cm
Linear Mold Shrinkage, Flow: 0.0045 cm/cm
Ball Indentation Hardness: 400 MPa

Hexion Bakelite™ PF 31.9 Phenolic Formaldehyde Resin, Ammonia Free (discontinued **) accurate 57%

$ 1663/MT

Density: 1.43 g/cc
Apparent Bulk Density: 0.600 g/cc
Linear Mold Shrinkage, Flow: 0.0045 cm/cm
Linear Mold Shrinkage, Flow: 0.0080 cm/cm
Flexural Strength: 110 MPa

Hexion Bakelite™ PF 38110 Phenolic Formaldehyde Resin, High Surface Quality (discontinued **) accurate 66%

$ 1702/MT

Density: 1.36 g/cc
Apparent Bulk Density: 0.650 g/cc
Linear Mold Shrinkage, Flow: 0.0065 cm/cm
Flexural Strength: 90.0 MPa
Flexural Modulus: 7.50 GPa

Hexion Bakelite™ PF 2774 Phenolic Formaldehyde Resin, Dishwasher Proof, Improved Electrical Properties, Low Shrinkage, UL Listed accurate 57%

$ 1861/MT

Density: 1.72 g/cc
Apparent Bulk Density: 0.750 g/cc
Linear Mold Shrinkage, Flow: 0.0010 cm/cm
Linear Mold Shrinkage, Flow: 0.0030 cm/cm
Ball Indentation Hardness: 425 MPa

Celanese Celstran® PP-GF40-02 PP, 40% Glass Reinforced accurate 57%

$ 1591/MT

Specific Gravity: 1.21 g/cc
Density: 1.21 g/cc
Tensile Strength at Break: 102 MPa
Tensile Strength at Break: 117 MPa
Tensile Strength at Break: 72.4 MPa @Temperature 93.3 °C

Hexion Bakelite™ 151733 Phenolic Formaldehyde Resin (discontinued **) accurate 66%

$ 1729/MT

Density: 1.45 g/cc
Apparent Bulk Density: 0.640 g/cc
Linear Mold Shrinkage, Flow: 0.0076 cm/cm
Tensile Strength at Break: 50.0 MPa
Tensile Modulus: 7.50 GPa

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, for sale ships. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

6 prices for Hexion Bakelite™ PF 2535 Phenolic Formaldehyde Resin, High Surface Quality, Dishwasher Proof (discontinued **

Seller from Tehran – 2021-07-09:

Seller from Tehran work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1611 per MT

Seller from Toronto – 2021-02-27:

Seller from Toronto work with company: Solvay, Dow Corning, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1593 per MT

Seller from Saint Petersburg – 2021-06-25:

Seller from Saint Petersburg work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2164 per MT

Seller from Abidjan – 2021-06-23:

Seller from Abidjan work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1796 per MT

Seller from Saint Petersburg – 2021-04-07:

Seller from Saint Petersburg work with company: Solvay, Arlon, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1571 per MT

Seller from Philadelphia – 2021-04-13:

Seller from Philadelphia work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2534 per MT