$ 2020/MT
- Density: 1.59 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption: 0.200 %
- Tensile Strength, Ultimate: 110 MPa
- Elongation at Break: 2.3 %
$ 1949/MT
- Density: 1.40 g/cc
- Water Absorption: 5.9 %
- Moisture Absorption at Equilibrium: 1.8 %
- Tensile Strength at Break: 195 MPa
- Elongation at Break: 3.0 %
$ 1519/MT
- Density: 1.10 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 3.0 %
- Charpy Impact Unnotched: NB @Temperature -30.0 °C
- Charpy Impact Unnotched: NB @Temperature 23.0 °C
$ 1700/MT
- Density: 1.23 g/cc
- Melt Flow: 3.69 g/10 min @Load 10.0 kg, Temperature 230 °C
- Hardness, Shore D: 56
- Tensile Strength at Break: 30.0 MPa
- Tensile Strength, Yield: 11.3 MPa @Strain 5.00 %
$ 1489/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 3.7 %
- Tensile Strength, Yield: 100 MPa
- Elongation at Yield: 40 %
- Tensile Modulus: 3.30 GPa
$ 1978/MT
- Density: 1.25 g/cc
- Moisture Absorption at Equilibrium: 3.2 %
- Tensile Strength, Yield: 90.0 MPa
- Elongation at Yield: 25 %
- Tensile Modulus: 2.90 GPa
$ 1448/MT
- Density: 1.18 g/cc
- Moisture Absorption: 3.70 %
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.020 cm/cm
- Tensile Strength, Yield: 55.0 MPa
$ 1824/MT
- Density: 1.23 g/cc
- Water Absorption: 7.6 %
- Moisture Absorption at Equilibrium: 2.3 %
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 3.5 %
$ 1872/MT
- Density: 1.36 g/cc
- Water Absorption: 6.8 %
- Moisture Absorption at Equilibrium: 2.0 %
- Tensile Strength at Break: 90.0 MPa
- Elongation at Break: 2.5 %
$ 1694/MT
- Density: 1.52 g/cc
- Moisture Absorption: 1.10 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
- Tensile Strength, Ultimate: 170 MPa
$ 1777/MT
- Density: 1.25 g/cc
- Water Absorption: 33 %
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 45 @Time 3.00 sec
- Tensile Strength, Ultimate: 20.0 MPa
$ 2435/MT
- Density: 1.14 g/cc
- Moisture Absorption: 3.50 %
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 240 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 260 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 280 °C
$ 1463/MT
- Density: 1.27 g/cc
- Water Absorption: 7.2 %
- Moisture Absorption at Equilibrium: 2.15 %
- Tensile Strength at Break: 87.0 MPa
- Elongation at Break: 5.5 %
$ 1620/MT
- Density: 1.54 g/cc
- Water Absorption: 7.8 %
- Moisture Absorption at Equilibrium: 2.2 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
$ 2525/MT
- Density: 1.07 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.3 %
- Charpy Impact Unnotched: NB @Temperature -30.0 °C
- Charpy Impact Unnotched: NB @Temperature 23.0 °C
$ 1496/MT
- Density: 1.87 g/cc
- Moisture Absorption at Equilibrium: 1.1 %
- Tensile Strength at Break: 150 MPa
- Elongation at Break: 1.3 %
- Tensile Modulus: 16.0 GPa
$ 1785/MT
- Density: 1.87 g/cc
- Moisture Absorption at Equilibrium: 1.1 %
- Tensile Strength at Break: 200 MPa
- Elongation at Break: 1.5 %
- Tensile Modulus: 18.0 GPa
$ 1524/MT
- Density: 1.18 g/cc
- Melt Flow: 11 g/10 min @Load 10.0 kg, Temperature 230 °C
- Hardness, Shore D: 37 @Time 3.00 sec
- Tensile Strength, Ultimate: 19.0 MPa
- Tensile Stress: 3.50 MPa @Strain 5.00 %
$ 2533/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.05 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.55 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 1.45e+6 cP @Temperature 260 °C
$ 1503/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.30 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.90 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 1.60e+6 cP @Temperature 260 °C
$ 1819/MT
- Density: 1.48 g/cc
- Water Absorption: 0.35 %
- Moisture Absorption: 0.150 %
- Viscosity: 17500 cP @Shear Rate 100000 1/s, Temperature 280 °C
- Viscosity: 20000 cP @Shear Rate 100000 1/s, Temperature 250 °C
$ 2120/MT
- Density: 1.31 g/cc
- Moisture Absorption at Equilibrium: 2.1 %
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 5.0 %
- Flexural Modulus: 6.30 GPa
$ 1911/MT
- Density: 1.14 g/cc
- Moisture Absorption: 3.50 %
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 240 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 260 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 280 °C
$ 1480/MT
- Density: 1.76 g/cc
- Tensile Strength at Break: 170 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 12.0 GPa
- Charpy Impact Unnotched: 10.0 J/cm²
$ 1450/MT
- Density: 1.65 g/cc
- Moisture Absorption at Equilibrium: 1.2 %
- Tensile Strength at Break: 145 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 11.0 GPa
$ 2272/MT
- Density: 1.23 g/cc
- Water Absorption: 2.5 %
- Moisture Absorption at Equilibrium: 0.40 %
- Melt Flow: 13.53 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 55
$ 1564/MT
- Density: 1.23 g/cc
- Water Absorption: 2.5 %
- Moisture Absorption at Equilibrium: 0.40 %
- Melt Flow: 13.53 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 55
$ 1823/MT
- Density: 1.48 g/cc
- Water Absorption: 5.3 %
- Moisture Absorption at Equilibrium: 1.4 %
- Tensile Strength at Break: 90.0 MPa
- Elongation at Break: 2.5 %
$ 2367/MT
- Density: 1.21 g/cc
- Water Absorption: 0.65 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 19 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 37.51 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1542/MT
- Density: 1.57 g/cc
- Water Absorption: 0.25 %
- Moisture Absorption at Equilibrium: 0.15 %
- Tensile Strength at Break: 145 MPa
- Elongation at Break: 2.5 %
$ 1601/MT
- Density: 1.23 g/cc
- Water Absorption: 7.6 %
- Moisture Absorption at Equilibrium: 2.3 %
- Tensile Strength at Break: 70.0 MPa
- Elongation at Break: 6.0 %
$ 1499/MT
- Density: 1.13 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 2.5 %
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: >= 50 %
$ 1655/MT
- Density: 1.52 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm
- Tensile Strength, Ultimate: 55.0 MPa
- Elongation at Break: 2.0 %
$ 1680/MT
- Density: 1.45 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption: 0.150 %
- Tensile Strength, Ultimate: 120 MPa
- Elongation at Break: 3.5 %
$ 2167/MT
- Density: 1.51 g/cc
- Moisture Absorption: 2.20 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Tensile Strength, Ultimate: 140 MPa
$ 1876/MT
- Density: 1.21 g/cc
- Melt Flow: 9.6 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 45 @Time 3.00 sec
- Tensile Strength, Ultimate: 19.5 MPa
- Tensile Stress: 5.40 MPa @Strain 5.00 %
$ 1505/MT
- Density: 1.34 g/cc
- Moisture Absorption: 1.50 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Tensile Strength, Ultimate: 115 MPa
$ 1979/MT
- Density: 1.53 g/cc
- Water Absorption: 6.2 %
- Moisture Absorption at Equilibrium: 1.7 %
- Melt Flow: 33.66 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 70.0 MPa
$ 1532/MT
- Density: 1.65 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption: 0.150 %
- Viscosity: 9000 cP @Shear Rate 100000 1/s, Temperature 270 °C
- Viscosity: 10000 cP @Shear Rate 100000 1/s, Temperature 250 °C
$ 1684/MT
- Density: 1.41 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
$ 1727/MT
- Density: 1.13 g/cc
- Moisture Absorption: 3.50 %
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 240 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 260 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 280 °C
$ 1689/MT
- Density: 1.41 g/cc
- Water Absorption: 5.5 %
- Moisture Absorption at Equilibrium: 1.5 %
- Tensile Strength at Break: 210 MPa
- Elongation at Break: 3.0 %
$ 1497/MT
- Density: 1.13 g/cc
- Viscosity: 150000 cP @Shear Rate 1000 1/s, Temperature 290 °C
- Viscosity: 175000 cP @Shear Rate 1000 1/s, Temperature 260 °C
- Viscosity: 175000 cP @Shear Rate 0.100 1/s, Temperature 290 °C
- Viscosity: 200000 cP @Shear Rate 1000 1/s, Temperature 230 °C
$ 1483/MT
- Density: 1.40 g/cc
- Water Absorption: 5.9 %
- Moisture Absorption at Equilibrium: 1.8 %
- Tensile Strength at Break: 195 MPa
- Elongation at Break: 3.0 %
$ 1465/MT
- Density: 1.18 g/cc
- Melt Flow: 23.6 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 40
- Tensile Strength at Break: 17.5 MPa
- Tensile Strength, Yield: 3.10 MPa @Strain 5.00 %
$ 1704/MT
- Density: 1.23 g/cc
- Melt Flow: 3.69 g/10 min @Load 10.0 kg, Temperature 230 °C
- Hardness, Shore D: 56
- Tensile Strength at Break: 30.0 MPa
- Tensile Strength, Yield: 11.3 MPa @Strain 5.00 %
$ 1583/MT
- Density: 1.09 g/cc
- Moisture Absorption: 2.00 %
- Viscosity Test: 150 cm³/g
- Linear Mold Shrinkage, Flow: 0.012 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
$ 1824/MT
- Density: 1.35 g/cc
- Water Absorption: 6.3 %
- Moisture Absorption at Equilibrium: 1.9 %
- Tensile Strength at Break: 185 MPa
- Elongation at Break: 3.5 %
$ 1594/MT
- Density: 1.14 g/cc
- Moisture Absorption: 3.50 %
- Viscosity: 70000 cP @Shear Rate 10000 1/s, Temperature 240 °C
- Viscosity: 70000 cP @Shear Rate 10000 1/s, Temperature 260 °C
- Viscosity: 70000 cP @Shear Rate 10000 1/s, Temperature 280 °C
$ 2546/MT
- Density: 1.42 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Tensile Strength at Break: 70.0 MPa
- Elongation at Break: 6.0 %
$ 1565/MT
- Density: 1.68 g/cc
- Water Absorption: 5.9 %
- Moisture Absorption at Equilibrium: 1.6 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Flow: 0.011 cm/cm
$ 1667/MT
- Density: 1.29 g/cc
- Moisture Absorption: 2.30 %
- Tensile Strength, Ultimate: 38.0 MPa
- Tensile Strength, Ultimate: 77.0 MPa
- Elongation at Break: 4.0 %
$ 2517/MT
- Density: 1.23 g/cc
- Water Absorption: 2.5 %
- Moisture Absorption at Equilibrium: 0.40 %
- Melt Flow: 4.305 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 55
$ 1702/MT
- Density: 1.41 g/cc
- Viscosity Test: 85 cm³/g
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Tensile Strength at Break: 210 MPa
$ 1595/MT
- Density: 1.26 g/cc
- Moisture Absorption: 3.00 %
- Linear Mold Shrinkage, Flow: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.022 cm/cm
- Tensile Strength, Ultimate: 80.0 MPa
$ 1552/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.15 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.65 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 2.25e+6 cP @Temperature 260 °C
$ 1556/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption: 2.50 %
- Viscosity Test: 450 cm³/g
- Tensile Strength, Yield: 85.0 MPa
$ 1583/MT
- Density: 1.62 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0030 cm/cm
- Tensile Strength, Ultimate: 55.0 MPa
- Elongation at Break: 0.60 %
$ 2103/MT
- Density: 1.38 g/cc
- Water Absorption: 6.3 %
- Moisture Absorption at Equilibrium: 1.9 %
- Tensile Strength at Break: 110 MPa
- Elongation at Break: 5.0 %
$ 2069/MT
- Density: 1.21 g/cc
- Water Absorption: 0.65 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 9.68 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 53
$ 1857/MT
- Density: 1.68 g/cc
- Water Absorption: 5.9 %
- Moisture Absorption at Equilibrium: 1.6 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Flow: 0.011 cm/cm
DSM Stanyl® TW241F12 (DAM) Nylon 46 60% Glass Reinforced, Heat Stabilized, High Flow (North America)
$ 2211/MT
- Density: 1.76 g/cc
- Tensile Strength at Break: 255 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 20.0 GPa
- Charpy Impact Unnotched: 9.00 J/cm²
$ 1825/MT
- Density: 1.54 g/cc
- Moisture Absorption: 1.90 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Tensile Strength, Ultimate: 135 MPa
$ 1525/MT
- Density: 1.68 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption: 0.150 %
- Tensile Strength, Ultimate: 130 MPa
- Elongation at Break: 2.3 %
$ 1921/MT
- Density: 1.23 g/cc
- Water Absorption: 7.6 %
- Moisture Absorption at Equilibrium: 2.3 %
- Tensile Strength at Break: 70.0 MPa
- Elongation at Break: 6.0 %
$ 1826/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.3 %
- Linear Mold Shrinkage, Flow: 0.0095 cm/cm
- Linear Mold Shrinkage, Flow: 0.0095 cm/cm
$ 1578/MT
- Density: 1.54 g/cc
- Moisture Absorption at Equilibrium: 2.2 %
- Tensile Strength at Break: 190 MPa
- Elongation at Break: 3.7 %
- Tensile Modulus: 8.90 GPa
$ 2358/MT
- Density: 1.14 g/cc
- Moisture Absorption: 3.50 %
- Viscosity: 70000 cP @Shear Rate 10000 1/s, Temperature 240 °C
- Viscosity: 70000 cP @Shear Rate 10000 1/s, Temperature 260 °C
- Viscosity: 70000 cP @Shear Rate 10000 1/s, Temperature 280 °C
$ 1745/MT
- Density: 1.13 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 2.5 %
- Tensile Strength, Yield: 95.0 MPa
- Elongation at Break: 15 %
$ 2207/MT
- Density: 1.21 g/cc
- Water Absorption: 7.5 %
- Moisture Absorption: 2.00 %
- Linear Mold Shrinkage, Flow: 0.010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
$ 1899/MT
- Density: 1.30 g/cc
- Water Absorption: 0.45 %
- Moisture Absorption at Equilibrium: 0.18 %
- Melting Point: 225 °C
- Other Extrusion: Yes
- Without Fillers: Yes
$ 2224/MT
- Density: 1.54 g/cc
- Water Absorption: 7.8 %
- Moisture Absorption at Equilibrium: 2.2 %
- Viscosity Test: 145 cm³/g
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
$ 1950/MT
- Density: 1.17 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 2.5 %
- Tensile Strength, Yield: 40.0 MPa
- Elongation at Break: >= 50 %
$ 1530/MT
- Density: 1.14 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption: 2.50 %
- Viscosity Test: 330 cm³/g
- Charpy Impact Unnotched: NB @Temperature 23.0 °C
$ 1710/MT
- Density: 1.13 g/cc
- Water Absorption: 0.17 %
- Moisture Absorption: 0.450 %
- Melt Flow: 2.7 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 86 @Time 3.00 sec
$ 1591/MT
- Density: 1.35 g/cc
- Water Absorption: 6.3 %
- Moisture Absorption at Equilibrium: 1.9 %
- Tensile Strength at Break: 110 MPa
- Elongation at Break: 5.0 %
$ 1620/MT
- Density: 1.66 g/cc
- Water Absorption: 3.6 %
- Moisture Absorption at Equilibrium: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
$ 1569/MT
- Density: 1.87 g/cc
- Moisture Absorption at Equilibrium: 1.1 %
- Viscosity Test: 70 cm³/g
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm
$ 1471/MT
- Density: 1.63 g/cc
- Water Absorption: 0.45 %
- Moisture Absorption: 0.180 %
- Linear Mold Shrinkage, Flow: 0.0045 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
$ 1852/MT
- Density: 1.18 g/cc
- Water Absorption: 13 %
- Moisture Absorption at Equilibrium: 3.7 %
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
$ 1908/MT
- Density: 1.18 g/cc
- Water Absorption: 13 %
- Moisture Absorption at Equilibrium: 3.7 %
- Viscosity Test: 185 cm³/g
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
$ 1795/MT
- Density: 1.37 g/cc
- Moisture Absorption: 2.00 %
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.020 cm/cm
- Tensile Strength, Yield: 45.0 MPa
$ 2592/MT
- Density: 1.21 g/cc
- Tensile Modulus: 1.00 GPa
- Melting Point: 295 °C
- Injection molding: Yes
$ 2427/MT
- Density: 1.21 g/cc
- Viscosity Test: 180 cm³/g
- Tensile Modulus: 2.80 GPa
- CTE, linear, Parallel to Flow: 80.0 µm/m-°C @Temperature 20.0 °C
- CTE, linear, Transverse to Flow: 100 µm/m-°C @Temperature 20.0 °C
$ 2432/MT
- Density: 1.43 g/cc
- Moisture Absorption: 2.35 %
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Linear Mold Shrinkage, Transverse: 0.015 cm/cm
- Tensile Strength, Yield: 80.0 MPa
$ 2569/MT
- Density: 1.18 g/cc
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Yield: >= 55 %
- Tensile Modulus: 1.00 GPa
- Charpy Impact Unnotched: NB
$ 1717/MT
- Density: 1.18 g/cc
- Water Absorption: 13.5 %
- Moisture Absorption at Equilibrium: 3.7 %
- Viscosity Test: 175 cm³/g
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
$ 2191/MT
- Density: 1.18 g/cc
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Yield: >= 55 %
- Tensile Modulus: 1.00 GPa
- Charpy Impact Unnotched: NB
$ 1458/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 3.7 %
- Tensile Strength, Yield: 100 MPa
- Elongation at Yield: 40 %
- Tensile Modulus: 3.30 GPa
$ 1774/MT
- Density: 1.18 g/cc
- Water Absorption: 13.5 %
- Moisture Absorption at Equilibrium: 3.7 %
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
$ 1575/MT
- Density: 1.10 g/cc
- Tensile Strength, Yield: 45.0 MPa
- Elongation at Yield: >= 50 %
- Tensile Modulus: 0.600 GPa
- Charpy Impact Unnotched: NB
$ 1518/MT
- Density: 1.10 g/cc
- Moisture Absorption at Equilibrium: 3.0 %
- Tensile Strength, Yield: 60.0 MPa
- Elongation at Yield: >= 50 %
- Tensile Modulus: 1.85 GPa
$ 2292/MT
- Density: 1.10 g/cc
- Water Absorption: 11 %
- Moisture Absorption at Equilibrium: 3.0 %
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.020 cm/cm
$ 2434/MT
- Density: 1.25 g/cc
- Water Absorption: 11.4 %
- Moisture Absorption at Equilibrium: 3.2 %
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
$ 1741/MT
- Density: 1.25 g/cc
- Water Absorption: 11.4 %
- Moisture Absorption at Equilibrium: 3.2 %
- Viscosity Test: 180 cm³/g
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
$ 1526/MT
- Density: 1.18 g/cc
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Yield: >= 55 %
- Tensile Modulus: 1.00 GPa
- Charpy Impact Unnotched: NB
$ 1446/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 3.7 %
- Tensile Strength, Yield: 100 MPa
- Elongation at Yield: 40 %
- Tensile Modulus: 3.30 GPa
$ 2073/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: >= 50 %
$ 1829/MT
- Density: 1.18 g/cc
- Viscosity Test: 220 cm³/g
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.020 cm/cm
- Tensile Strength, Yield: 100 MPa
$ 1469/MT
- Density: 1.18 g/cc
- Water Absorption: 13.5 %
- Moisture Absorption at Equilibrium: 3.7 %
- Viscosity Test: 185 cm³/g
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
$ 1925/MT
- Density: 1.10 g/cc
- Water Absorption: 11 %
- Moisture Absorption at Equilibrium: 3.0 %
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
$ 2356/MT
- Density: 1.51 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Tensile Strength at Break: 230 MPa
- Elongation at Break: 3.0 %
$ 1538/MT
- Density: 1.45 g/cc
- Water Absorption: 5.5 %
- Moisture Absorption: 1.70 %
- Linear Mold Shrinkage, Flow: 0.0034 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0083 cm/cm
$ 1822/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.30 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.90 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 1.12e+6 cP @Temperature 260 °C
$ 2272/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.30 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.90 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 1.12e+6 cP @Temperature 260 °C
$ 1552/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.30 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.90 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 1.12e+6 cP @Temperature 260 °C
$ 1453/MT
- Density: 1.36 g/cc
- Water Absorption: 6.0 %
- Moisture Absorption at Equilibrium: 1.6 %
- Tensile Strength at Break: 190 MPa
- Elongation at Break: 3.0 %
$ 1809/MT
- Density: 1.38 g/cc
- Water Absorption: 6.3 %
- Moisture Absorption at Equilibrium: 1.9 %
- Tensile Strength at Break: 180 MPa
- Elongation at Break: 3.5 %
$ 1879/MT
- Density: 1.07 g/cc
- Moisture Absorption: 2.80 %
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Linear Mold Shrinkage, Transverse: 0.020 cm/cm
- Tensile Strength, Yield: 30.0 MPa
$ 1768/MT
- Density: 1.15 g/cc
- Water Absorption: 0.70 %
- Moisture Absorption at Equilibrium: 0.30 %
- Melt Flow: 12.1 g/10 min @Load 10.0 kg, Temperature 230 °C
- Hardness, Shore D: 40
$ 1527/MT
- Density: 1.66 g/cc
- Water Absorption: 3.6 %
- Moisture Absorption at Equilibrium: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Flow: 0.0080 cm/cm
$ 1511/MT
- Density: 1.27 g/cc
- Water Absorption: 8.0 %
- Moisture Absorption at Equilibrium: 2.4 %
- Tensile Strength at Break: 135 MPa
- Elongation at Break: 4.0 %
$ 1834/MT
- Density: 1.87 g/cc
- Moisture Absorption at Equilibrium: 1.1 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm
- Melting Point: 295 °C
$ 1951/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.3 %
- Linear Mold Shrinkage, Flow: 0.0095 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0095 cm/cm
$ 1973/MT
- Density: 1.13 g/cc
- Moisture Absorption: 3.20 %
- Linear Mold Shrinkage, Flow: 0.012 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Tensile Strength, Yield: 45.0 MPa
$ 2089/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.00 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.55 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 1.12e+6 cP @Temperature 260 °C
$ 2104/MT
- Density: 1.56 g/cc
- Water Absorption: 4.5 %
- Moisture Absorption at Equilibrium: 1.4 %
- Tensile Strength at Break: 230 MPa
- Elongation at Break: 3.0 %
$ 1872/MT
- Density: 1.28 g/cc
- Moisture Absorption: 2.60 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
- Tensile Strength, Ultimate: 150 MPa
$ 1759/MT
- Density: 1.41 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 0.15 %
- Melt Flow: 22.56 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 95.0 MPa
$ 2193/MT
- Density: 1.56 g/cc
- Moisture Absorption at Equilibrium: 1.3 %
- Tensile Strength at Break: 170 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 12.0 GPa
$ 1785/MT
- Density: 1.33 g/cc
- Water Absorption: 6.0 %
- Moisture Absorption at Equilibrium: 1.8 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
$ 1768/MT
- Density: 1.57 g/cc
- Moisture Absorption: 1.70 %
- Tensile Strength, Ultimate: 230 MPa
- Elongation at Break: 4.1 %
- Tensile Modulus: 15.0 GPa
$ 1969/MT
- Density: 1.35 g/cc
- Water Absorption: 6.3 %
- Moisture Absorption at Equilibrium: 1.9 %
- Tensile Strength at Break: 175 MPa
- Elongation at Break: 3.2 %
$ 1736/MT
- Density: 1.07 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.3 %
- Charpy Impact Unnotched: NB @Temperature -30.0 °C
- Charpy Impact Unnotched: NB @Temperature 23.0 °C
$ 1892/MT
- Density: 1.27 g/cc
- Water Absorption: 0.60 %
- Moisture Absorption at Equilibrium: 0.15 %
- Tensile Strength, Yield: 34.0 MPa @Strain 10.0 %
- Elongation at Break: 250 %
$ 1586/MT
- Density: 1.10 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 3.0 %
- Charpy Impact Unnotched: NB @Temperature -30.0 °C
- Charpy Impact Unnotched: NB @Temperature 23.0 °C
$ 1617/MT
- Density: 1.40 g/cc
- Water Absorption: 0.45 %
- Moisture Absorption at Equilibrium: 0.18 %
- Melt Flow: 30.8 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength, Yield: 55.0 MPa
$ 1982/MT
- Density: 1.63 g/cc
- Tensile Strength, Ultimate: 210 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 13.0 GPa
- Flexural Modulus: 11.5 GPa
$ 1959/MT
- Density: 1.51 g/cc
- Moisture Absorption at Equilibrium: 2.2 %
- Tensile Strength at Break: 230 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 13.0 GPa
$ 1631/MT
- Density: 1.14 g/cc
- Moisture Absorption: 3.50 %
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 240 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 260 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 280 °C
$ 1935/MT
- Density: 1.24 g/cc
- Water Absorption: 0.60 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 30 g/10 min @Load 2.16 kg, Temperature 240 °C
- Melt Flow: 31 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1497/MT
- Density: 1.48 g/cc
- Water Absorption: 5.3 %
- Moisture Absorption at Equilibrium: 1.4 %
- Tensile Strength at Break: 90.0 MPa
- Elongation at Break: 2.5 %
$ 1994/MT
- Density: 1.56 g/cc
- Tensile Strength at Break: 150 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 9.20 GPa
- Charpy Impact, Notched: 0.800 J/cm² @Temperature 23.0 °C
$ 2109/MT
- Density: 1.29 g/cc
- Water Absorption: 5.5 %
- Moisture Absorption at Equilibrium: 1.6 %
- Tensile Strength at Break: 150 MPa
- Elongation at Break: 4.0 %
$ 2261/MT
- Density: 1.21 g/cc
- Melt Flow: 8.47 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 46
- Tensile Strength at Break: 21.1 MPa
- Tensile Strength, Yield: 6.40 MPa @Strain 5.00 %
$ 1511/MT
- Density: 1.10 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 3.0 %
- High Load Melt Index: 44 g/10 min @Load 21.6 kg, Temperature 275 °C
- Tensile Strength, Yield: 60.0 MPa
$ 2017/MT
- Density: 1.29 g/cc
- Water Absorption: 6.7 %
- Moisture Absorption: 2.60 %
- Linear Mold Shrinkage, Flow: 0.0115 cm/cm
- Linear Mold Shrinkage, Transverse: 0.014 cm/cm
$ 1566/MT
- Density: 1.36 g/cc
- Moisture Absorption: 2.40 %
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
- Tensile Strength, Ultimate: 67.0 MPa
$ 1567/MT
- Density: 1.55 g/cc
- Water Absorption: 0.35 %
- Moisture Absorption at Equilibrium: 0.15 %
- Tensile Strength at Break: 145 MPa
- Elongation at Break: 2.0 %
$ 1846/MT
- Density: 1.23 g/cc
- Water Absorption: 2.5 %
- Moisture Absorption at Equilibrium: 0.40 %
- Melt Flow: 4.305 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 55
$ 1504/MT
- Density: 1.30 g/cc
- Water Absorption: 0.45 %
- Moisture Absorption at Equilibrium: 0.18 %
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength, Yield: 55.0 MPa
$ 1687/MT
- Density: 1.32 g/cc
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.7 %
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 8.0 %
$ 1716/MT
- Density: 1.22 g/cc
- Moisture Absorption: 3.15 %
- Tensile Strength, Ultimate: 110 MPa
- Tensile Strength, Ultimate: 185 MPa
- Elongation at Break: 2.0 %
$ 2572/MT
- Density: 1.53 g/cc
- Water Absorption: 6.2 %
- Moisture Absorption at Equilibrium: 1.7 %
- Tensile Strength at Break: 40.0 MPa
- Elongation at Break: 4.0 %
$ 1588/MT
- Density: 1.11 g/cc
- Water Absorption: 0.75 %
- Moisture Absorption: 0.300 %
- Melt Flow: 30 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 34 @Time 15.0 sec
$ 1905/MT
- Density: 1.48 g/cc
- Moisture Absorption: 2.00 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Tensile Strength, Ultimate: 122 MPa
$ 1908/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.5 %
- Viscosity Test: 165 cm³/g
- CTE, linear, Parallel to Flow: 90.0 µm/m-°C @Temperature 20.0 °C
$ 1613/MT
- Density: 1.30 g/cc
- Water Absorption: 0.45 %
- Moisture Absorption at Equilibrium: 0.18 %
- Melt Flow: 28.6 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength, Yield: 55.0 MPa
$ 2178/MT
- Density: 1.51 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 6.0 %
$ 1756/MT
- Density: 1.14 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 2.5 %
- Viscosity Test: 180 cm³/g
- Tensile Strength, Yield: 80.0 MPa
$ 1450/MT
- Density: 1.23 g/cc
- Water Absorption: 7.6 %
- Moisture Absorption: 2.30 %
- Linear Mold Shrinkage, Flow: 0.0032 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0096 cm/cm
$ 1658/MT
- Density: 1.29 g/cc
- Water Absorption: 0.60 %
- Moisture Absorption at Equilibrium: 0.15 %
- Melt Flow: 19.35 g/10 min @Load 2.16 kg, Temperature 230 °C
- Melt Flow: 22.8 g/10 min @Load 2.16 kg, Temperature 240 °C
$ 1648/MT
- Density: 1.69 g/cc
- Tensile Strength, Ultimate: 225 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 16.0 GPa
- Izod Impact Resistance: 1.80 J/cm² @Temperature 23.0 °C
$ 1657/MT
- Density: 1.13 g/cc
- Water Absorption: 10 %
- Moisture Absorption at Equilibrium: 2.8 %
- Viscosity Test: 142 cm³/g
- Linear Mold Shrinkage, Flow: 0.0095 cm/cm
$ 1497/MT
- Density: 1.07 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.3 %
- Tensile Strength, Yield: 45.0 MPa
- Elongation at Break: >= 50 %
$ 2357/MT
- Density: 1.34 g/cc
- Tensile Strength at Break: 80.0 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 6.00 GPa
- Charpy Impact Unnotched: 4.00 J/cm² @Temperature -30.0 °C
$ 1937/MT
- Density: 1.28 g/cc
- Moisture Absorption: 2.20 %
- Tensile Strength, Yield: 88.0 MPa
- Elongation at Break: 15 %
- Tensile Modulus: 6.70 GPa
$ 1746/MT
- Density: 1.62 g/cc
- Moisture Absorption at Equilibrium: 1.8 %
- Tensile Strength at Break: 250 MPa
- Elongation at Break: 2.7 %
- Tensile Modulus: 16.0 GPa
$ 1714/MT
- Density: 1.63 g/cc
- Water Absorption: 0.45 %
- Moisture Absorption: 0.180 %
- Viscosity: 12500 cP @Shear Rate 100000 1/s, Temperature 310 °C
- Viscosity: 15000 cP @Shear Rate 100000 1/s, Temperature 290 °C
$ 2236/MT
- Density: 1.05 g/cc
- Moisture Absorption: 1.70 %
- Linear Mold Shrinkage, Flow: 0.028 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Tensile Strength, Yield: 35.0 MPa
$ 1823/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.3 %
- Tensile Strength, Yield: 95.0 MPa
- Elongation at Break: 25 %
$ 2443/MT
- Density: 1.41 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
$ 1512/MT
- Density: 1.35 g/cc
- Water Absorption: 6.3 %
- Moisture Absorption: 1.90 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
$ 1618/MT
- Density: 1.36 g/cc
- Moisture Absorption: 2.40 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Tensile Strength, Ultimate: 110 MPa
$ 1839/MT
- Density: 1.30 g/cc
- Water Absorption: 0.45 %
- Moisture Absorption: 0.180 %
- Viscosity: 12500 cP @Shear Rate 100000 1/s, Temperature 270 °C
- Viscosity: 15000 cP @Shear Rate 100000 1/s, Temperature 230 °C
$ 2550/MT
- Density: 1.18 g/cc
- Moisture Absorption: 3.70 %
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.020 cm/cm
- Tensile Strength, Yield: 55.0 MPa
$ 1445/MT
- Density: 1.26 g/cc
- Water Absorption: 0.60 %
- Moisture Absorption at Equilibrium: 0.25 %
- Tensile Strength, Yield: 13.4 MPa @Strain 10.0 %
- Tensile Strength, Yield: 24.0 MPa @Strain 100 %
$ 1705/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.15 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.65 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 2.25e+6 cP @Temperature 260 °C
$ 1488/MT
- Density: 1.20 g/cc
- Water Absorption: 6.8 %
- Moisture Absorption at Equilibrium: 2.0 %
- Tensile Strength at Break: 60.0 MPa
- Elongation at Break: 7.0 %
$ 2290/MT
- Density: 1.39 g/cc
- Water Absorption: 3.5 %
- Moisture Absorption at Equilibrium: 0.40 %
- Melt Flow: 34.75 g/10 min @Load 2.16 kg, Temperature 240 °C
- Hardness, Shore D: 61
$ 1562/MT
- Density: 1.48 g/cc
- Moisture Absorption: 0.150 %
- Tensile Strength, Ultimate: 100 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 8.00 GPa
$ 2389/MT
- Density: 1.49 g/cc
- Moisture Absorption at Equilibrium: 1.7 %
- Tensile Strength at Break: 67.0 MPa
- Elongation at Break: 6.0 %
- Tensile Modulus: 4.80 GPa
$ 1509/MT
- Density: 1.22 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption: 0.150 %
- Tensile Strength, Yield: 44.0 MPa
- Elongation at Break: 15 %
$ 2148/MT
- Density: 1.08 g/cc
- Water Absorption: 0.80 %
- Melt Flow: 41 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 25 @Time 3.00 sec
- Tensile Strength, Ultimate: 16.0 MPa
$ 2309/MT
- Density: 1.45 g/cc
- Water Absorption: 5.5 %
- Moisture Absorption: 1.70 %
- Tensile Strength, Ultimate: 200 MPa
- Elongation at Break: 2.5 %
$ 1626/MT
- Density: 1.54 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption: 0.150 %
- Tensile Strength, Ultimate: 100 MPa
- Elongation at Break: 2.5 %
$ 1945/MT
- Density: 1.02 g/cc
- Moisture Absorption: 1.90 %
- Linear Mold Shrinkage, Flow: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.022 cm/cm
- Tensile Strength, Yield: 20.0 MPa
$ 1535/MT
- Density: 1.07 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption: 2.50 %
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Break: >= 50 %
$ 1631/MT
- Density: 1.29 g/cc
- Tensile Strength at Break: 70.0 MPa
- Elongation at Break: 8.0 %
- Tensile Modulus: 2.80 GPa
- Melting Point: 295 °C
$ 1483/MT
- Density: 1.34 g/cc
- Moisture Absorption: 1.50 %
- Tensile Strength, Ultimate: 65.0 MPa
- Tensile Strength, Ultimate: 95.0 MPa
- Elongation at Break: 2.5 %
$ 1923/MT
- Density: 1.22 g/cc
- Moisture Absorption: 3.15 %
- Tensile Strength, Ultimate: 110 MPa
- Tensile Strength, Ultimate: 185 MPa
- Elongation at Break: 2.0 %
$ 2002/MT
- Density: 1.14 g/cc
- Moisture Absorption: 3.50 %
- Viscosity: 70000 cP @Shear Rate 10000 1/s, Temperature 240 °C
- Viscosity: 70000 cP @Shear Rate 10000 1/s, Temperature 260 °C
- Viscosity: 70000 cP @Shear Rate 10000 1/s, Temperature 280 °C
$ 1756/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.00 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.55 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 810000 cP @Temperature 260 °C
$ 1682/MT
- Density: 1.52 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption: 0.150 %
- Tensile Strength, Ultimate: 145 MPa
- Elongation at Break: 3.0 %
$ 1444/MT
- Density: 1.40 g/cc
- Moisture Absorption at Equilibrium: 0.30 %
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Break: >= 50 %
- Elongation at Yield: 4.0 %
$ 1546/MT
- Density: 1.22 g/cc
- Moisture Absorption: 3.10 %
- Tensile Strength, Ultimate: 115 MPa
- Elongation at Break: 4.0 %
- Tensile Modulus: 4.50 GPa
$ 1536/MT
- Density: 1.40 g/cc
- Moisture Absorption: 2.40 %
- Tensile Strength, Ultimate: 180 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 9.00 GPa
$ 1448/MT
- Density: 1.16 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption at Equilibrium: 0.40 %
- Melt Flow: 4.64 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 33
$ 1712/MT
- Density: 1.20 g/cc
- Water Absorption: 6.8 %
- Moisture Absorption at Equilibrium: 2.0 %
- High Load Melt Index: 48 g/10 min @Load 21.6 kg, Temperature 275 °C
- Tensile Strength at Break: 105 MPa
$ 2249/MT
- Density: 1.14 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 2.4 %
- Tensile Strength, Yield: 60.0 MPa
- Elongation at Break: >= 50 %
$ 2272/MT
- Density: 1.67 g/cc
- Water Absorption: 0.60 %
- Moisture Absorption: 0.200 %
- Tensile Strength, Ultimate: 140 MPa
- Elongation at Break: 2.5 %
$ 1584/MT
- Density: 1.18 g/cc
- Moisture Absorption: 3.70 %
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.020 cm/cm
- Tensile Strength, Yield: 55.0 MPa
$ 1662/MT
- Density: 1.13 g/cc
- Water Absorption: 10 %
- Moisture Absorption at Equilibrium: 2.8 %
- Linear Mold Shrinkage, Flow: 0.0095 cm/cm
- Linear Mold Shrinkage, Flow: 0.0095 cm/cm
$ 2368/MT
- Density: 1.48 g/cc
- Water Absorption: 5.3 %
- Moisture Absorption at Equilibrium: 1.4 %
- Tensile Strength at Break: 60.0 MPa
- Elongation at Break: 5.5 %
$ 1471/MT
- Density: 1.43 g/cc
- Moisture Absorption at Equilibrium: 2.6 %
- Tensile Strength at Break: 115 MPa
- Elongation at Break: 7.0 %
- Flexural Modulus: 6.00 GPa
$ 1981/MT
- Density: 1.36 g/cc
- Moisture Absorption: 2.40 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Tensile Strength, Ultimate: 110 MPa
$ 2081/MT
- Density: 1.26 g/cc
- Melt Flow: 37.8 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 63
- Tensile Strength at Break: 34.4 MPa
- Tensile Strength, Yield: 17.1 MPa @Strain 5.00 %
$ 1995/MT
- Density: 1.16 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption at Equilibrium: 0.40 %
- Melt Flow: 32.48 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 33
$ 1498/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.00 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.55 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 1.12e+6 cP @Temperature 260 °C
$ 2100/MT
- Density: 1.17 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 2.5 %
- Tensile Strength, Yield: 80.0 MPa
- Elongation at Break: 8.0 %
$ 1590/MT
- Density: 1.15 g/cc
- Water Absorption: 0.70 %
- Moisture Absorption: 0.300 %
- Melt Flow: 6.5 g/10 min @Load 10.0 kg, Temperature 230 °C
- Hardness, Shore D: 37
$ 2309/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.00 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.55 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 810000 cP @Temperature 260 °C
$ 1498/MT
- Density: 1.56 g/cc
- Water Absorption: 4.5 %
- Moisture Absorption at Equilibrium: 1.4 %
- Tensile Strength at Break: 160 MPa
- Elongation at Break: 3.5 %
$ 2144/MT
- Density: 1.21 g/cc
- Melt Flow: 36.3 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 46
- Tensile Strength at Break: 22.4 MPa
- Tensile Strength, Yield: 5.30 MPa @Strain 5.00 %
$ 1551/MT
- Density: 1.37 g/cc
- Water Absorption: 6.5 %
- Moisture Absorption at Equilibrium: 1.9 %
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 3.0 %
$ 2390/MT
- Density: 1.62 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption at Equilibrium: 1.8 %
- Viscosity Test: 140 cm³/g
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
$ 2209/MT
- Density: 1.16 g/cc
- Water Absorption: 0.70 %
- Moisture Absorption at Equilibrium: 0.30 %
- Melt Flow: 58 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 41
$ 1856/MT
- Density: 1.14 g/cc
- Moisture Absorption: 3.50 %
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 240 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 260 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 280 °C
$ 1658/MT
- Density: 1.41 g/cc
- Moisture Absorption: 2.60 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Tensile Strength, Ultimate: 115 MPa
$ 2220/MT
- Density: 1.30 g/cc
- Water Absorption: 0.45 %
- Moisture Absorption: 0.180 %
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: 10 %
$ 1766/MT
- Density: 1.63 g/cc
- Water Absorption: 0.45 %
- Moisture Absorption at Equilibrium: 0.18 %
- Tensile Strength at Break: 190 MPa
- Elongation at Break: 2.5 %
$ 1768/MT
- Density: 1.26 g/cc
- Water Absorption: 0.60 %
- Moisture Absorption at Equilibrium: 0.25 %
- Tensile Strength, Yield: 15.0 MPa
- Elongation at Break: >= 50 %
$ 1861/MT
- Density: 1.78 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption: 0.120 %
- Viscosity: 15000 cP @Shear Rate 100000 1/s, Temperature 315 °C
- Viscosity: 20000 cP @Shear Rate 100000 1/s, Temperature 295 °C
$ 1783/MT
- Density: 1.34 g/cc
- Tensile Strength at Break: 80.0 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 6.00 GPa
- Charpy Impact Unnotched: 4.00 J/cm² @Temperature -30.0 °C
$ 2555/MT
- Density: 1.48 g/cc
- Water Absorption: 0.35 %
- Moisture Absorption: 0.150 %
- Linear Mold Shrinkage, Flow: 0.017 cm/cm
- Linear Mold Shrinkage, Transverse: 0.014 cm/cm
$ 2054/MT
- Density: 1.56 g/cc
- Moisture Absorption at Equilibrium: 1.3 %
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 9.00 GPa
$ 2556/MT
- Density: 1.78 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption: 0.120 %
- Viscosity: 20000 cP @Shear Rate 100000 1/s, Temperature 295 °C
- Viscosity: 23000 cP @Shear Rate 100000 1/s, Temperature 315 °C
$ 2076/MT
- Density: 1.35 g/cc
- Water Absorption: 6.3 %
- Moisture Absorption at Equilibrium: 1.9 %
- Tensile Strength at Break: 185 MPa
- Elongation at Break: 3.5 %
$ 1622/MT
- Density: 1.62 g/cc
- Tensile Strength at Break: 160 MPa
- Elongation at Break: 5.0 %
- Tensile Modulus: 10.0 GPa
- Charpy Impact Unnotched: 10.0 J/cm²
$ 1946/MT
- Density: 1.77 g/cc
- Water Absorption: 4.5 %
- Moisture Absorption at Equilibrium: 1.3 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Flow: 0.0090 cm/cm
$ 1752/MT
- Density: 1.40 g/cc
- Moisture Absorption: 1.10 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0133 cm/cm
- Tensile Strength, Ultimate: 90.0 MPa
$ 1760/MT
- Density: 1.21 g/cc
- Melt Flow: 8.47 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 46
- Tensile Strength at Break: 21.1 MPa
- Tensile Strength, Yield: 6.40 MPa @Strain 5.00 %
$ 2288/MT
- Density: 1.16 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption at Equilibrium: 0.40 %
- Melt Flow: 32.48 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 33
$ 1623/MT
- Density: 1.41 g/cc
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.7 %
- Tensile Strength at Break: 110 MPa
- Elongation at Break: 8.5 %
$ 1824/MT
- Density: 1.49 g/cc
- Moisture Absorption at Equilibrium: 1.7 %
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 9.00 GPa
$ 1854/MT
- Density: 1.38 g/cc
- Tensile Strength, Ultimate: 110 MPa
- Elongation at Break: 2.8 %
- Tensile Modulus: 6.50 GPa
- Charpy Impact, Notched: 1.00 J/cm² @Temperature 23.0 °C
- Deflection Temperature at 1.8 MPa (264 psi): 183 °C
$ 1928/MT
- Density: 1.25 g/cc
- Water Absorption: 8.0 %
- Moisture Absorption at Equilibrium: 2.1 %
- Linear Mold Shrinkage, Flow: 0.010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.015 cm/cm
$ 1759/MT
- Density: 1.44 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
- Tensile Strength, Ultimate: 150 MPa
- Elongation at Break: 2.8 %
$ 1542/MT
- Density: 1.27 g/cc
- Moisture Absorption: 2.90 %
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Linear Mold Shrinkage, Transverse: 0.015 cm/cm
- Tensile Strength, Ultimate: 90.0 MPa
$ 2543/MT
- Density: 1.62 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption: 0.200 %
- Tensile Strength, Ultimate: 120 MPa
- Elongation at Break: 2.5 %
$ 1873/MT
- Density: 1.23 g/cc
- Water Absorption: 0.63 %
- Moisture Absorption at Equilibrium: 0.18 %
- Melt Flow: 4.305 g/10 min @Load 2.16 kg, Temperature 230 °C
- Melt Flow: 4.7 g/10 min @Load 2.16 kg, Temperature 240 °C
$ 1629/MT
- Density: 1.52 g/cc
- Water Absorption: 0.50 %
- Moisture Absorption at Equilibrium: 0.25 %
- Tensile Strength at Break: 150 MPa
- Elongation at Break: 2.5 %
$ 1588/MT
- Density: 1.27 g/cc
- Water Absorption: 8.0 %
- Moisture Absorption at Equilibrium: 2.4 %
- Melting Point: 220 °C
- Blow Molding: Yes
$ 1768/MT
- Density: 1.21 g/cc
- Melt Flow: 36.3 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 46
- Tensile Strength at Break: 22.4 MPa
- Tensile Strength, Yield: 5.30 MPa @Strain 5.00 %
$ 1705/MT
- Density: 1.38 g/cc
- Moisture Absorption: 2.30 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Tensile Strength, Ultimate: 120 MPa
$ 1875/MT
- Density: 1.43 g/cc
- Moisture Absorption: 1.50 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
- Tensile Strength, Ultimate: 100 MPa
$ 1751/MT
- Density: 1.78 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 0.12 %
- Tensile Strength at Break: 210 MPa
- Elongation at Break: 2.0 %
$ 1716/MT
- Density: 1.23 g/cc
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 56 @Time 3.00 sec
- Tensile Strength, Ultimate: 31.0 MPa
- Tensile Stress: 11.4 MPa @Strain 5.00 %
$ 1482/MT
- Density: 1.35 g/cc
- Water Absorption: 6.3 %
- Moisture Absorption: 1.90 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
$ 1792/MT
- Density: 1.43 g/cc
- Moisture Absorption at Equilibrium: 2.6 %
- Tensile Strength at Break: 205 MPa
- Elongation at Break: 3.5 %
- Flexural Modulus: 9.00 GPa
$ 1922/MT
- Density: 1.59 g/cc
- Water Absorption: 4.5 %
- Moisture Absorption: 1.30 %
- Linear Mold Shrinkage, Flow: 0.0021 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0077 cm/cm
$ 1859/MT
- Density: 1.13 g/cc
- Water Absorption: 10 %
- Moisture Absorption at Equilibrium: 3.0 %
- Viscosity Test: 214 cm³/g
- Tensile Strength, Yield: 85.0 MPa
$ 1708/MT
- Density: 1.50 g/cc
- Water Absorption: 5.5 %
- Moisture Absorption: 1.70 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
$ 2471/MT
- Density: 1.77 g/cc
- Water Absorption: 4.5 %
- Moisture Absorption at Equilibrium: 1.3 %
- Viscosity Test: 150 cm³/g
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
$ 2155/MT
- Density: 1.21 g/cc
- Water Absorption: 0.65 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 37.51 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 53
$ 1576/MT
- Density: 1.14 g/cc
- Moisture Absorption: 3.50 %
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 240 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 260 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 280 °C
$ 1967/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption: 2.50 %
- Viscosity Test: 135 cm³/g
- Tensile Strength, Yield: 75.2 MPa
$ 1838/MT
- Density: 1.37 g/cc
- Moisture Absorption: 2.00 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Tensile Strength, Ultimate: 120 MPa
$ 1791/MT
- Density: 1.77 g/cc
- Water Absorption: 4.5 %
- Moisture Absorption at Equilibrium: 1.3 %
- Viscosity Test: 80 cm³/g
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
$ 1767/MT
- Density: 1.41 g/cc
- Tensile Strength at Break: 115 MPa
- Elongation at Break: 7.0 %
- Tensile Modulus: 6.00 GPa
- Charpy Impact Unnotched: 9.00 J/cm²
$ 2028/MT
- Density: 1.70 g/cc
- Tensile Strength, Ultimate: 130 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 11.5 GPa
- Charpy Impact Unnotched: 4.50 J/cm² @Temperature 23.0 °C
$ 1569/MT
- Density: 1.49 g/cc
- Moisture Absorption at Equilibrium: 1.7 %
- Tensile Strength at Break: 67.0 MPa
- Elongation at Break: 6.0 %
- Tensile Modulus: 4.80 GPa
$ 1559/MT
- Density: 1.43 g/cc
- Tensile Strength at Break: 115 MPa
- Elongation at Break: 7.0 %
- Tensile Modulus: 6.00 GPa
- Flexural Modulus: 6.00 GPa
$ 1618/MT
- Density: 1.59 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption: 0.150 %
- Tensile Strength, Ultimate: 105 MPa
- Elongation at Break: 2.4 %
$ 1712/MT
- Density: 1.49 g/cc
- Moisture Absorption at Equilibrium: 1.7 %
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 9.00 GPa
$ 1488/MT
- Density: 1.27 g/cc
- Water Absorption: 0.58 %
- Moisture Absorption at Equilibrium: 0.15 %
- Melt Flow: 7.239 g/10 min @Load 2.16 kg, Temperature 240 °C
- Elongation at Break: >= 50 %
$ 2015/MT
- Density: 1.54 g/cc
- Tensile Strength at Break: 110 MPa
- Elongation at Break: 7.0 %
- Tensile Modulus: 4.10 GPa
- Charpy Impact, Notched: 1.50 J/cm²
$ 1684/MT
- Density: 1.75 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.12 %
- Tensile Strength at Break: 165 MPa
- Elongation at Break: 2.0 %
$ 1622/MT
- Density: 1.41 g/cc
- Moisture Absorption: 2.30 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Tensile Strength, Ultimate: 120 MPa
$ 2036/MT
- Density: 1.68 g/cc
- Tensile Strength at Break: 180 MPa
- Elongation at Break: 2.5 %
- Tensile Modulus: 12.0 GPa
- Charpy Impact, Notched: 0.900 J/cm² @Temperature -30.0 °C
$ 1524/MT
- Density: 1.32 g/cc
- Moisture Absorption: 2.40 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm
- Tensile Strength, Ultimate: 170 MPa
$ 1925/MT
- Density: 1.39 g/cc
- Moisture Absorption: 1.20 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Tensile Strength, Ultimate: 130 MPa
$ 1770/MT
- Density: 1.24 g/cc
- Water Absorption: 0.60 %
- Moisture Absorption: 0.200 %
- Melt Flow: 6.5 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 61 @Time 3.00 sec
$ 1730/MT
- Density: 1.23 g/cc
- Water Absorption: 0.63 %
- Moisture Absorption at Equilibrium: 0.18 %
- Melt Flow: 4.305 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 15.8 MPa @Strain 100 %
$ 1498/MT
- Density: 1.29 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 3.1 %
- Tensile Strength at Break: 70.0 MPa
- Elongation at Break: 8.0 %
$ 1577/MT
- Density: 1.82 g/cc
- Water Absorption: 4.5 %
- Moisture Absorption at Equilibrium: 1.2 %
- Viscosity Test: 140 cm³/g
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
$ 1772/MT
- Density: 1.38 g/cc
- Water Absorption: 6.2 %
- Moisture Absorption: 1.80 %
- Linear Mold Shrinkage, Flow: 0.0091 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0082 cm/cm
$ 2299/MT
- Density: 1.60 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption: 0.150 %
- Tensile Strength, Ultimate: 90.0 MPa
- Elongation at Break: 1.8 %
$ 1870/MT
- Density: 1.52 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 0.15 %
- Tensile Strength at Break: 145 MPa
- Elongation at Break: 4.0 %
$ 2176/MT
- Density: 1.25 g/cc
- Water Absorption: 8.0 %
- Moisture Absorption at Equilibrium: 2.1 %
- Linear Mold Shrinkage, Flow: 0.010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.015 cm/cm
$ 1834/MT
- Density: 1.40 g/cc
- Water Absorption: 5.9 %
- Moisture Absorption at Equilibrium: 1.8 %
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 4.5 %
$ 1518/MT
- Density: 1.40 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 0.15 %
- Melt Flow: 23.8 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 85.0 MPa
$ 1670/MT
- Density: 1.25 g/cc
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Yield: >= 50 %
- Tensile Modulus: 1.00 GPa
- Charpy Impact, Notched: 3.00 J/cm²
$ 1524/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.3 %
- Linear Mold Shrinkage, Flow: 0.0095 cm/cm
- Linear Mold Shrinkage, Flow: 0.0095 cm/cm
$ 1819/MT
- Density: 1.16 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption at Equilibrium: 0.40 %
- Melt Flow: 32.48 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 33
$ 1908/MT
- Density: 1.30 g/cc
- Moisture Absorption: 1.40 %
- Linear Mold Shrinkage, Flow: 0.0067 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Tensile Strength, Ultimate: 110 MPa
$ 1702/MT
- Density: 1.17 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 2.5 %
- Tensile Strength, Yield: 80.0 MPa
- Elongation at Break: 8.0 %
$ 1759/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.3 %
- Linear Mold Shrinkage, Flow: 0.0095 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0095 cm/cm
$ 1764/MT
- Density: 1.38 g/cc
- Moisture Absorption: 2.30 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Tensile Strength, Ultimate: 118 MPa
$ 1446/MT
- Density: 1.36 g/cc
- Water Absorption: 6.8 %
- Moisture Absorption at Equilibrium: 2.0 %
- Tensile Strength at Break: 45.0 MPa
- Elongation at Break: 25 %
$ 1632/MT
- Density: 1.62 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0030 cm/cm
- Tensile Strength, Ultimate: 55.0 MPa
- Elongation at Break: 0.60 %
$ 1671/MT
- Density: 1.66 g/cc
- Moisture Absorption: 1.70 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
- Tensile Strength, Ultimate: 120 MPa
$ 1506/MT
- Density: 1.35 g/cc
- Water Absorption: 6.3 %
- Moisture Absorption at Equilibrium: 1.9 %
- Tensile Strength at Break: 110 MPa
- Elongation at Break: 5.0 %
$ 1468/MT
- Density: 1.77 g/cc
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 2.5 %
- Tensile Modulus: 12.0 GPa
- Charpy Impact Unnotched: 7.00 J/cm²
$ 1867/MT
- Density: 1.77 g/cc
- Moisture Absorption at Equilibrium: 1.3 %
- Tensile Strength at Break: 190 MPa
- Elongation at Break: 1.7 %
- Tensile Modulus: 15.0 GPa
$ 1957/MT
- Density: 1.53 g/cc
- Moisture Absorption: 2.10 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Tensile Strength, Ultimate: 100 MPa
$ 1491/MT
- Density: 1.52 g/cc
- Moisture Absorption at Equilibrium: 2.1 %
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 8.00 GPa
$ 2014/MT
- Density: 1.68 g/cc
- Tensile Strength at Break: 125 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 8.00 GPa
- Charpy Impact Unnotched: 6.00 J/cm²
$ 1713/MT
- Density: 1.68 g/cc
- Moisture Absorption at Equilibrium: 1.6 %
- Tensile Strength at Break: 180 MPa
- Elongation at Break: 2.5 %
- Tensile Modulus: 12.0 GPa
$ 2341/MT
- Density: 1.82 g/cc
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 12.0 GPa
- Charpy Impact Unnotched: 7.50 J/cm²
$ 1616/MT
- Density: 1.82 g/cc
- Moisture Absorption at Equilibrium: 1.2 %
- Tensile Strength at Break: 200 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 17.0 GPa
$ 1975/MT
- Density: 1.77 g/cc
- Moisture Absorption: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
- Tensile Strength, Ultimate: 140 MPa
$ 1567/MT
- Density: 1.66 g/cc
- Moisture Absorption: 1.60 %
- Linear Mold Shrinkage, Flow: 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.017 cm/cm
- Tensile Strength, Ultimate: 120 MPa
$ 1999/MT
- Density: 1.41 g/cc
- Water Absorption: 5.7 %
- Moisture Absorption: 1.70 %
- Linear Mold Shrinkage, Flow: 0.0036 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0089 cm/cm
$ 1845/MT
- Density: 1.34 g/cc
- Tensile Strength at Break: 45.0 MPa
- Elongation at Break: 15 %
- Tensile Modulus: 2.50 GPa
- Charpy Impact Unnotched: 4.00 J/cm² @Temperature -30.0 °C
$ 2288/MT
- Density: 1.23 g/cc
- Water Absorption: 7.6 %
- Moisture Absorption at Equilibrium: 2.3 %
- Tensile Strength at Break: 70.0 MPa
- Elongation at Break: 6.0 %
$ 1513/MT
- Density: 1.69 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption: 0.150 %
- Tensile Strength, Ultimate: 115 MPa
- Elongation at Break: 1.5 %
$ 1583/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.30 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.90 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 810000 cP @Temperature 260 °C
$ 1731/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.30 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.95 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 1.13e+6 cP @Temperature 260 °C
$ 1490/MT
- Density: 1.26 g/cc
- Melt Flow: 5.04 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 63
- Tensile Strength at Break: 26.8 MPa
- Tensile Strength, Yield: 16.6 MPa @Strain 5.00 %
$ 2446/MT
- Density: 1.32 g/cc
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 61 @Time 3.00 sec
- Tensile Strength, Ultimate: 20.5 MPa
- Tensile Stress: 16.0 MPa @Strain 5.00 %
$ 2519/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.35 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.95 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 2.25e+6 cP @Temperature 260 °C
$ 1526/MT
- Density: 1.18 g/cc
- Melt Flow: 23.6 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 40
- Tensile Strength at Break: 17.5 MPa
- Tensile Strength, Yield: 3.10 MPa @Strain 5.00 %
$ 1529/MT
- Density: 1.11 g/cc
- Water Absorption: 0.75 %
- Moisture Absorption at Equilibrium: 0.30 %
- Melt Flow: 33.3 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 34
$ 1648/MT
- Density: 1.29 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 3.1 %
- Viscosity Test: 150 cm³/g
- Tensile Strength at Break: 140 MPa
$ 1482/MT
- Density: 1.41 g/cc
- Moisture Absorption at Equilibrium: 2.6 %
- Tensile Strength at Break: 210 MPa
- Elongation at Break: 4.0 %
- Tensile Modulus: 10.0 GPa
$ 1647/MT
- Density: 1.82 g/cc
- Water Absorption: 4.5 %
- Moisture Absorption at Equilibrium: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Flow: 0.0090 cm/cm
$ 2053/MT
- Density: 1.51 g/cc
- Water Absorption: 8.0 %
- Moisture Absorption at Equilibrium: 2.2 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Flow: 0.011 cm/cm
$ 1656/MT
- Density: 1.37 g/cc
- Water Absorption: 0.35 %
- Moisture Absorption: 0.160 %
- Tensile Strength, Ultimate: 80.0 MPa
- Elongation at Break: 5.0 %
$ 1809/MT
- Density: 1.56 g/cc
- Water Absorption: 4.5 %
- Moisture Absorption at Equilibrium: 1.4 %
- Tensile Strength at Break: 230 MPa
- Elongation at Break: 3.0 %
$ 1801/MT
- Density: 1.08 g/cc
- Moisture Absorption: 1.80 %
- Linear Mold Shrinkage, Flow: 0.012 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Tensile Strength, Ultimate: 50.0 MPa
$ 1716/MT
- Density: 1.10 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 3.0 %
- Melt Flow: 44 g/10 min
- Tensile Strength, Yield: 60.0 MPa
$ 1558/MT
- Density: 1.36 g/cc
- Water Absorption: 6.0 %
- Moisture Absorption at Equilibrium: 1.6 %
- Tensile Strength at Break: 190 MPa
- Elongation at Break: 3.0 %
$ 1538/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.3 %
- Tensile Strength, Yield: 60.0 MPa
- Elongation at Break: >= 50 %
$ 2265/MT
- Density: 1.54 g/cc
- Water Absorption: 0.20 %
- Tensile Strength, Ultimate: 55.0 MPa
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: 3.5 %
$ 2464/MT
- Density: 1.23 g/cc
- Water Absorption: 7.6 %
- Moisture Absorption at Equilibrium: 2.3 %
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 3.5 %
$ 1656/MT
- Density: 1.31 g/cc
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 10 %
- Flexural Modulus: 3.20 GPa
- Melting Point: 295 °C
$ 2082/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.5 %
- Viscosity Test: 245 cm³/g
- Elongation at Break: 45 %
$ 2299/MT
- Density: 1.30 g/cc
- Water Absorption: 0.45 %
- Moisture Absorption: 0.180 %
- Viscosity: 8000 cP @Shear Rate 100000 1/s, Temperature 270 °C
- Viscosity: 8500 cP @Shear Rate 100000 1/s, Temperature 250 °C
$ 1565/MT
- Density: 1.36 g/cc
- Moisture Absorption: 2.40 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Tensile Strength, Ultimate: 110 MPa
$ 1618/MT
- Density: 1.16 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption at Equilibrium: 0.40 %
- Melt Flow: 4.64 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 33
$ 1526/MT
- Density: 1.14 g/cc
- Moisture Absorption: 2.80 %
- Linear Mold Shrinkage, Flow: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.022 cm/cm
- Tensile Strength, Yield: 50.0 MPa
$ 1716/MT
- Density: 1.29 g/cc
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 4.0 %
- Tensile Modulus: 6.10 GPa
- CTE, linear: 30.0 µm/m-°C @Temperature 20.0 °C
$ 1455/MT
- Density: 1.41 g/cc
- Water Absorption: 5.5 %
- Moisture Absorption at Equilibrium: 1.5 %
- Tensile Strength at Break: 160 MPa
- Elongation at Break: 5.0 %
$ 1474/MT
- Density: 1.13 g/cc
- Water Absorption: 0.20 %
- Moisture Absorption: 0.650 %
- Melt Flow: 4.3 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 88 @Time 3.00 sec
$ 1582/MT
- Density: 1.28 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption at Equilibrium: 2.0 %
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
$ 1636/MT
- Density: 1.34 g/cc
- Moisture Absorption: 2.60 %
- Tensile Strength, Ultimate: 170 MPa
- Elongation at Break: 1.8 %
- Tensile Modulus: 8.00 GPa
$ 1803/MT
- Density: 1.24 g/cc
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 51 @Time 3.00 sec
- Tensile Strength, Ultimate: 32.0 MPa
- Elongation at Break: 450 %
$ 1981/MT
- Density: 1.37 g/cc
- Moisture Absorption: 2.00 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Tensile Strength, Ultimate: 120 MPa
$ 1752/MT
- Density: 1.35 g/cc
- Water Absorption: 6.3 %
- Moisture Absorption at Equilibrium: 1.9 %
- Tensile Strength at Break: 185 MPa
- Elongation at Break: 3.5 %
$ 1702/MT
- Density: 1.35 g/cc
- Moisture Absorption: 2.25 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Tensile Strength, Ultimate: 160 MPa
$ 1718/MT
- Density: 1.38 g/cc
- Water Absorption: 6.6 %
- Moisture Absorption at Equilibrium: 1.9 %
- Tensile Strength at Break: 80.0 MPa
- Elongation at Break: 3.0 %
$ 1469/MT
- Density: 1.42 g/cc
- Moisture Absorption: 2.00 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Tensile Strength, Ultimate: 65.0 MPa
$ 1629/MT
- Density: 1.14 g/cc
- Moisture Absorption: 3.50 %
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 240 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 260 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 280 °C
$ 1725/MT
- Density: 1.48 g/cc
- Moisture Absorption: 2.00 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Tensile Strength, Ultimate: 118 MPa
$ 1535/MT
- Density: 1.29 g/cc
- Water Absorption: 5.5 %
- Moisture Absorption at Equilibrium: 1.6 %
- Tensile Strength at Break: 110 MPa
- Elongation at Break: 5.5 %
$ 1451/MT
- Density: 1.35 g/cc
- Moisture Absorption: 2.80 %
- Tensile Strength, Ultimate: 180 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 9.00 GPa
$ 1591/MT
- Density: 1.14 g/cc
- Moisture Absorption: 3.50 %
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 240 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 260 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 280 °C
$ 1463/MT
- Density: 1.30 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption at Equilibrium: 2.1 %
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
$ 1482/MT
- Melt Flow: 9.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 36.0 MPa
- Elongation at Break: 500 %
- Tensile Modulus: 0.230 GPa
- Charpy Impact, Notched: 0.700 J/cm² @Temperature -30.0 °C
$ 1506/MT
- Density: 1.52 g/cc
- Moisture Absorption at Equilibrium: 2.1 %
- Viscosity Test: 145 cm³/g
- Linear Mold Shrinkage, Flow: 0.010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.015 cm/cm
$ 1731/MT
- Density: 1.15 g/cc
- Water Absorption: 0.70 %
- Moisture Absorption at Equilibrium: 0.30 %
- Melt Flow: 1.4 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 12.1 g/10 min @Load 10.0 kg, Temperature 230 °C
$ 1486/MT
- Density: 1.14 g/cc
- Moisture Absorption: 3.50 %
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 240 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 260 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 280 °C
$ 1631/MT
- Density: 1.47 g/cc
- Moisture Absorption: 2.90 %
- Linear Mold Shrinkage, Flow: 0.0090 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
- Tensile Strength, Ultimate: 110 MPa
$ 1995/MT
- Density: 1.62 g/cc
- Moisture Absorption: 1.85 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
- Tensile Strength, Ultimate: 170 MPa
$ 1464/MT
- Density: 1.32 g/cc
- Moisture Absorption: 2.60 %
- Tensile Strength, Ultimate: 120 MPa
- Tensile Strength, Ultimate: 185 MPa
- Tensile Strength, Ultimate: 76.0 MPa @Temperature 200 °C
$ 1848/MT
- Density: 1.65 g/cc
- Moisture Absorption at Equilibrium: 1.2 %
- Tensile Strength at Break: 180 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 14.0 GPa
$ 2490/MT
- Density: 1.23 g/cc
- Water Absorption: 2.5 %
- Moisture Absorption at Equilibrium: 0.40 %
- Melt Flow: 13.53 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 55
$ 1937/MT
- Density: 1.23 g/cc
- Water Absorption: 7.6 %
- Moisture Absorption at Equilibrium: 2.3 %
- Tensile Strength at Break: 70.0 MPa
- Elongation at Break: 6.0 %
$ 1572/MT
- Density: 1.50 g/cc
- Water Absorption: 5.0 %
- Moisture Absorption at Equilibrium: 1.5 %
- Tensile Strength at Break: 220 MPa
- Elongation at Break: 3.0 %
$ 1459/MT
- Density: 1.16 g/cc
- Moisture Absorption: 3.00 %
- Linear Mold Shrinkage, Flow: 0.010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Tensile Strength, Yield: 40.0 MPa
$ 1826/MT
- Density: 1.13 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 2.5 %
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: >= 50 %
$ 1501/MT
- Density: 1.72 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption: 0.150 %
- Linear Mold Shrinkage, Flow: 0.0025 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0095 cm/cm
$ 1612/MT
- Density: 1.62 g/cc
- Moisture Absorption: 1.85 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
- Tensile Strength, Ultimate: 160 MPa
$ 1599/MT
- Density: 1.20 g/cc
- Water Absorption: 6.8 %
- Moisture Absorption at Equilibrium: 2.0 %
- Tensile Strength at Break: 105 MPa
- Elongation at Break: 4.0 %
$ 1849/MT
- Density: 1.40 g/cc
- Tensile Strength, Ultimate: 150 MPa
- Elongation at Break: 2.1 %
- Tensile Modulus: 11.3 GPa
- Charpy Impact Unnotched: 6.10 J/cm² @Temperature 23.0 °C
$ 1586/MT
- Density: 1.17 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 2.5 %
- Tensile Strength, Yield: 40.0 MPa
- Elongation at Break: >= 50 %
$ 1681/MT
- Density: 1.27 g/cc
- Water Absorption: 0.58 %
- Moisture Absorption at Equilibrium: 0.15 %
- Melt Flow: 7.239 g/10 min @Load 2.16 kg, Temperature 240 °C
- Hardness, Shore D: 74
$ 1520/MT
- Density: 1.28 g/cc
- Water Absorption: 0.60 %
- Moisture Absorption at Equilibrium: 0.25 %
- Tensile Strength, Yield: 16.5 MPa
- Elongation at Break: >= 50 %
$ 1627/MT
- Density: 1.10 g/cc
- Water Absorption: 0.16 %
- Moisture Absorption: 0.450 %
- Melt Flow: 13.8 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 82 @Time 3.00 sec
$ 1580/MT
- Density: 1.51 g/cc
- Water Absorption: 8.0 %
- Moisture Absorption at Equilibrium: 2.2 %
- Viscosity Test: 145 cm³/g
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
$ 2314/MT
- Density: 1.62 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption at Equilibrium: 1.8 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Flow: 0.0090 cm/cm
$ 1507/MT
- Density: 1.48 g/cc
- Water Absorption: 5.3 %
- Moisture Absorption at Equilibrium: 1.4 %
- Tensile Strength at Break: 60.0 MPa
- Elongation at Break: 5.5 %
$ 1506/MT
- Density: 1.07 g/cc
- Moisture Absorption: 2.80 %
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Linear Mold Shrinkage, Transverse: 0.020 cm/cm
- Tensile Strength, Yield: 45.0 MPa
$ 1737/MT
- Density: 1.41 g/cc
- Moisture Absorption: 2.60 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Tensile Strength, Ultimate: 115 MPa
$ 1748/MT
- Density: 1.16 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption at Equilibrium: 0.40 %
- Melt Flow: 32.48 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 33
$ 1634/MT
- Density: 1.20 g/cc
- Water Absorption: 6.8 %
- Moisture Absorption at Equilibrium: 2.0 %
- Tensile Strength at Break: 60.0 MPa
- Elongation at Break: 7.0 %
$ 1972/MT
- Density: 1.41 g/cc
- Tensile Strength at Break: 115 MPa
- Elongation at Break: 6.0 %
- Tensile Modulus: 6.00 GPa
- Charpy Impact Unnotched: 9.00 J/cm²
$ 1578/MT
- Density: 1.34 g/cc
- Tensile Strength at Break: 45.0 MPa
- Elongation at Break: 15 %
- Tensile Modulus: 2.50 GPa
- Charpy Impact Unnotched: 4.00 J/cm² @Temperature -30.0 °C
$ 1445/MT
- Density: 1.41 g/cc
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.7 %
- Tensile Strength at Break: 170 MPa
- Elongation at Break: 5.2 %
$ 1495/MT
- Density: 1.37 g/cc
- Water Absorption: 0.35 %
- Moisture Absorption at Equilibrium: 0.16 %
- Melt Flow: 28.77 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 80.0 MPa
$ 2133/MT
- Density: 1.67 g/cc
- Water Absorption: 0.45 %
- Moisture Absorption: 0.180 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
$ 1612/MT
- Density: 1.23 g/cc
- Moisture Absorption: 3.00 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Tensile Strength, Ultimate: 70.0 MPa
$ 1526/MT
- Density: 1.11 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 2.5 %
- Tensile Strength, Yield: 70.0 MPa
- Elongation at Break: >= 50 %
$ 2057/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Tensile Strength at Break: 115 MPa
- Elongation at Break: 7.0 %
$ 1450/MT
- Density: 1.87 g/cc
- Moisture Absorption at Equilibrium: 1.1 %
- Viscosity Test: 70 cm³/g
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm
$ 1530/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption: 2.50 %
- Viscosity Test: 152 cm³/g
- Tensile Strength, Yield: 45.0 MPa
$ 2186/MT
- Density: 1.67 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption: 0.150 %
- Tensile Strength, Ultimate: 105 MPa
- Elongation at Break: 1.7 %
$ 1489/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.30 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.90 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 1.12e+6 cP @Temperature 260 °C
$ 2129/MT
- Density: 1.77 g/cc
- Water Absorption: 4.5 %
- Moisture Absorption at Equilibrium: 1.3 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Flow: 0.0090 cm/cm
$ 1494/MT
- Density: 1.30 g/cc
- Water Absorption: 0.45 %
- Moisture Absorption at Equilibrium: 0.18 %
- Melt Flow: 39 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength, Yield: 58.0 MPa
$ 1704/MT
- Density: 1.40 g/cc
- Moisture Absorption: 1.60 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Tensile Strength, Ultimate: 120 MPa
$ 1674/MT
- Density: 1.20 g/cc
- Melt Flow: 10.8 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 45
- Tensile Strength at Break: 16.0 MPa
- Tensile Strength, Yield: 6.60 MPa @Strain 5.00 %
$ 2067/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption: 2.50 %
- Viscosity Test: 370 cm³/g
- Tensile Strength, Yield: 85.0 MPa
$ 1594/MT
- Density: 1.52 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 0.15 %
- Melt Flow: 27.36 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 140 MPa
$ 1765/MT
- Density: 1.14 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 2.4 %
- Tensile Strength, Yield: 90.0 MPa
- Elongation at Break: 40 %
$ 1625/MT
- Density: 1.28 g/cc
- Water Absorption: 0.60 %
- Moisture Absorption at Equilibrium: 0.25 %
- Tensile Strength, Yield: 16.5 MPa
- Elongation at Break: >= 50 %
$ 2006/MT
- Density: 1.26 g/cc
- Melt Flow: 37.8 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 63
- Tensile Strength at Break: 34.4 MPa
- Tensile Strength, Yield: 17.1 MPa @Strain 5.00 %
$ 1885/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.3 %
- Linear Mold Shrinkage, Flow: 0.0095 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0095 cm/cm
$ 1719/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.30 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.90 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 810000 cP @Temperature 260 °C
$ 1984/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.30 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.90 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 810000 cP @Temperature 260 °C
$ 2145/MT
- Density: 1.50 g/cc
- Water Absorption: 5.0 %
- Moisture Absorption at Equilibrium: 1.1 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
$ 2154/MT
- Density: 1.28 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption at Equilibrium: 2.0 %
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
$ 2002/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.3 %
- Linear Mold Shrinkage, Flow: 0.0095 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0095 cm/cm
$ 1939/MT
- Density: 1.38 g/cc
- Water Absorption: 8.0 %
- Moisture Absorption at Equilibrium: 2.1 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
$ 1705/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.30 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.90 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 810000 cP @Temperature 260 °C
$ 1540/MT
- Density: 1.16 g/cc
- Water Absorption: 0.70 %
- Moisture Absorption at Equilibrium: 0.30 %
- Melt Flow: 33 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 58 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2160/MT
- Density: 1.42 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption: 0.200 %
- Tensile Strength, Yield: 45.0 MPa
- Elongation at Yield: 3.0 %
$ 1584/MT
- Density: 1.36 g/cc
- Water Absorption: 6.0 %
- Moisture Absorption at Equilibrium: 1.6 %
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 5.0 %
$ 1893/MT
- Density: 1.33 g/cc
- Water Absorption: 6.0 %
- Moisture Absorption at Equilibrium: 1.8 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Flow: 0.011 cm/cm
$ 1515/MT
- Density: 1.47 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Tensile Strength, Ultimate: 50.0 MPa
- Elongation at Break: 0.60 %
$ 1610/MT
- Density: 1.44 g/cc
- Water Absorption: 0.45 %
- Moisture Absorption at Equilibrium: 0.18 %
- Melt Flow: 59.04 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength, Yield: 65.0 MPa
$ 1534/MT
- Density: 1.39 g/cc
- Water Absorption: 3.5 %
- Moisture Absorption at Equilibrium: 0.40 %
- Melt Flow: 34.75 g/10 min @Load 2.16 kg, Temperature 240 °C
- Hardness, Shore D: 61
$ 1754/MT
- Density: 1.14 g/cc
- Moisture Absorption: 3.50 %
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 240 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 260 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 280 °C
$ 1687/MT
- Density: 1.13 g/cc
- Water Absorption: 10 %
- Moisture Absorption at Equilibrium: 2.8 %
- Viscosity Test: 129 cm³/g
- Linear Mold Shrinkage, Flow: 0.011 cm/cm
$ 1721/MT
- Density: 1.21 g/cc
- Water Absorption: 0.65 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 9.68 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 53
$ 1463/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Tensile Strength at Break: 210 MPa
- Elongation at Break: 4.0 %
$ 1681/MT
- Density: 1.43 g/cc
- Moisture Absorption at Equilibrium: 2.6 %
- Tensile Strength at Break: 205 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 10.5 GPa
$ 1548/MT
- Density: 1.49 g/cc
- Moisture Absorption: 1.90 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
- Tensile Strength, Ultimate: 150 MPa
$ 1922/MT
- Density: 1.13 g/cc
- Water Absorption: 0.20 %
- Moisture Absorption: 0.640 %
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 88 @Time 3.00 sec
$ 2232/MT
- Density: 1.38 g/cc
- Water Absorption: 6.2 %
- Moisture Absorption at Equilibrium: 1.8 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
$ 1818/MT
- Density: 1.13 g/cc
- Moisture Absorption: 3.30 %
- Viscosity Test: 118 cm³/g
- Linear Mold Shrinkage, Flow: 0.010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
$ 1505/MT
- Density: 1.17 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 2.5 %
- Tensile Strength, Yield: 80.0 MPa
- Elongation at Break: 8.0 %
$ 2384/MT
- Density: 1.27 g/cc
- Moisture Absorption: 2.00 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
- Tensile Strength, Ultimate: 230 MPa
$ 1714/MT
- Density: 1.38 g/cc
- Water Absorption: 6.3 %
- Moisture Absorption at Equilibrium: 1.9 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
$ 1899/MT
- Density: 1.23 g/cc
- Water Absorption: 7.6 %
- Moisture Absorption at Equilibrium: 2.3 %
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 3.5 %
$ 1948/MT
- Density: 1.46 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption: 0.150 %
- Viscosity: 12500 cP @Shear Rate 100000 1/s, Temperature 270 °C
- Viscosity: 17500 cP @Shear Rate 100000 1/s, Temperature 250 °C
$ 1880/MT
- Density: 1.20 g/cc
- Melt Flow: 10.8 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 45
- Tensile Strength at Break: 16.0 MPa
- Tensile Strength, Yield: 6.60 MPa @Strain 5.00 %
$ 1446/MT
- Density: 1.56 g/cc
- Tensile Strength at Break: 100 MPa
- Elongation at Break: 4.0 %
- Tensile Modulus: 6.00 GPa
- Charpy Impact, Notched: 0.800 J/cm² @Temperature -30.0 °C
$ 2577/MT
- Density: 1.63 g/cc
- Water Absorption: 0.45 %
- Moisture Absorption at Equilibrium: 0.18 %
- Tensile Strength at Break: 185 MPa
- Elongation at Break: 2.5 %
$ 1486/MT
- Density: 1.60 g/cc
- Tensile Strength, Ultimate: 115 MPa
- Elongation at Break: 2.7 %
- Tensile Modulus: 8.50 GPa
- Charpy Impact Unnotched: 4.00 J/cm² @Temperature 23.0 °C
$ 2244/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.30 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.90 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 560000 cP @Temperature 260 °C
$ 1513/MT
- Density: 1.13 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 2.5 %
- Tensile Strength, Yield: 95.0 MPa
- Elongation at Break: 15 %
$ 1573/MT
- Density: 1.33 g/cc
- Water Absorption: 6.0 %
- Moisture Absorption at Equilibrium: 1.8 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Flow: 0.011 cm/cm
$ 1936/MT
- Density: 1.48 g/cc
- Tensile Strength, Ultimate: 105 MPa
- Tensile Strength, Ultimate: 190 MPa
- Elongation at Break: 3.2 %
- Elongation at Break: 6.0 %
$ 1464/MT
- Density: 1.63 g/cc
- Water Absorption: 0.45 %
- Moisture Absorption: 0.180 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
$ 1564/MT
- Density: 1.72 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption: 0.150 %
- Tensile Strength, Ultimate: 165 MPa
- Elongation at Break: 1.8 %
$ 2094/MT
- Density: 1.56 g/cc
- Water Absorption: 4.5 %
- Moisture Absorption at Equilibrium: 1.4 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
$ 1655/MT
- Density: 1.33 g/cc
- Water Absorption: 6.0 %
- Moisture Absorption at Equilibrium: 1.8 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
$ 1755/MT
- Density: 1.16 g/cc
- Moisture Absorption: 2.70 %
- Tensile Strength, Yield: 81.0 MPa
- Elongation at Yield: 4.2 %
- Tensile Modulus: 3.10 GPa
$ 1706/MT
- Density: 1.23 g/cc
- Water Absorption: 7.6 %
- Moisture Absorption at Equilibrium: 2.3 %
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 3.5 %
$ 1761/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.35 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.95 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 2.25e+6 cP @Temperature 260 °C
$ 2092/MT
- Density: 1.41 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Viscosity Test: 145 cm³/g
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
$ 1606/MT
- Density: 1.41 g/cc
- Water Absorption: 5.5 %
- Moisture Absorption at Equilibrium: 1.5 %
- Tensile Strength at Break: 210 MPa
- Elongation at Break: 3.0 %
$ 1772/MT
- Density: 1.76 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm
- Tensile Strength at Break: 170 MPa
- Elongation at Break: 3.0 %
$ 1500/MT
- Density: 1.38 g/cc
- Water Absorption: 8.0 %
- Moisture Absorption at Equilibrium: 2.1 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
$ 1554/MT
- Density: 1.41 g/cc
- Water Absorption: 5.5 %
- Moisture Absorption at Equilibrium: 1.5 %
- Tensile Strength at Break: 160 MPa
- Elongation at Break: 5.0 %
$ 2223/MT
- Density: 1.69 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 0.15 %
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 2.5 %
$ 1628/MT
- Density: 1.41 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Viscosity Test: 145 cm³/g
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
$ 2326/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.3 %
- Linear Mold Shrinkage, Flow: 0.0095 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0095 cm/cm
$ 2151/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Tensile Strength at Break: 115 MPa
- Elongation at Break: 6.0 %
$ 1788/MT
- Density: 1.11 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 2.5 %
- Charpy Impact Unnotched: NB @Temperature -30.0 °C
- Charpy Impact Unnotched: NB @Temperature 23.0 °C
$ 1674/MT
- Density: 1.58 g/cc
- Water Absorption: 4.8 %
- Moisture Absorption: 1.70 %
- Linear Mold Shrinkage, Flow: 0.0037 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0056 cm/cm
$ 1793/MT
- Density: 1.38 g/cc
- Water Absorption: 6.6 %
- Moisture Absorption at Equilibrium: 1.9 %
- Tensile Strength at Break: 40.0 MPa
- Elongation at Break: 4.5 %
$ 1613/MT
- Density: 1.30 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption at Equilibrium: 2.1 %
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
$ 1697/MT
- Density: 1.30 g/cc
- Water Absorption: 0.45 %
- Moisture Absorption at Equilibrium: 0.18 %
- Melt Flow: 6.5 g/10 min @Load 1.60 kg, Temperature 250 °C
- Tensile Strength, Yield: 45.0 MPa
$ 1997/MT
- Density: 1.62 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption: 0.150 %
- Tensile Strength, Ultimate: 110 MPa
- Elongation at Break: 2.5 %
$ 1622/MT
- Density: 1.68 g/cc
- Tensile Strength at Break: 125 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 8.00 GPa
- Charpy Impact, Notched: 0.900 J/cm² @Temperature -30.0 °C
$ 1545/MT
- Density: 1.30 g/cc
- Moisture Absorption: 1.40 %
- Linear Mold Shrinkage, Flow: 0.0067 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Tensile Strength, Ultimate: 110 MPa
$ 1700/MT
- Density: 1.68 g/cc
- Water Absorption: 5.9 %
- Moisture Absorption at Equilibrium: 1.6 %
- Viscosity Test: 145 cm³/g
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
$ 1947/MT
- Density: 1.13 g/cc
- Water Vapor Transmission: 35.0 g/m²/day @Temperature 23.0 °C
- Oxygen Transmission: 1.30 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Oxygen Transmission: 1.90 cc-mm/m²-24hr-atm @Temperature 23.0 °C
- Viscosity: 410000 cP @Temperature 260 °C
$ 1494/MT
- Density: 1.52 g/cc
- Moisture Absorption at Equilibrium: 2.1 %
- Linear Mold Shrinkage, Flow: 0.010 cm/cm
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Melting Point: 295 °C
$ 1522/MT
- Density: 1.14 g/cc
- Moisture Absorption: 3.50 %
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 240 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 260 °C
- Viscosity: 90000 cP @Shear Rate 10000 1/s, Temperature 280 °C
$ 2224/MT
- Density: 1.50 g/cc
- Water Absorption: 5.0 %
- Moisture Absorption at Equilibrium: 1.5 %
- Tensile Strength at Break: 150 MPa
- Elongation at Break: 4.0 %
$ 1552/MT
- Density: 1.26 g/cc
- Water Absorption: 0.60 %
- Moisture Absorption at Equilibrium: 0.25 %
- Tensile Strength, Yield: 13.4 MPa @Strain 10.0 %
- Tensile Strength, Yield: 24.0 MPa @Strain 100 %
$ 2369/MT
- Density: 1.63 g/cc
- Water Absorption: 0.25 %
- Moisture Absorption: 0.150 %
- Viscosity: 20000 cP @Shear Rate 100000 1/s, Temperature 230 °C
- Viscosity: 20000 cP @Shear Rate 100000 1/s, Temperature 250 °C
$ 1606/MT
- Density: 1.62 g/cc
- Moisture Absorption: 2.20 %
- Tensile Strength, Ultimate: 135 MPa
- Tensile Strength, Ultimate: 240 MPa
- Tensile Strength, Ultimate: 60.0 MPa @Temperature 200 °C
$ 2023/MT
- Density: 1.35 g/cc
- Water Absorption: 6.3 %
- Moisture Absorption at Equilibrium: 1.9 %
- Tensile Strength at Break: 110 MPa
- Elongation at Break: 5.0 %
$ 1582/MT
- Density: 1.36 g/cc
- Water Absorption: 6.0 %
- Moisture Absorption at Equilibrium: 1.6 %
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 5.0 %
$ 2050/MT
- Density: 1.60 g/cc
- Water Absorption: 0.25 %
- Moisture Absorption: 0.150 %
- Viscosity: 20000 cP @Shear Rate 100000 1/s, Temperature 230 °C
- Viscosity: 20000 cP @Shear Rate 100000 1/s, Temperature 250 °C
$ 1574/MT
- Density: 1.13 g/cc
- Water Absorption: 10 %
- Moisture Absorption at Equilibrium: 2.8 %
- Linear Mold Shrinkage, Flow: 0.011 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
$ 2035/MT
- Density: 1.26 g/cc
- Melt Flow: 5.04 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 63
- Tensile Strength at Break: 26.8 MPa
- Tensile Strength, Yield: 16.6 MPa @Strain 5.00 %
$ 1719/MT
- Density: 1.47 g/cc
- Moisture Absorption: 1.70 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Tensile Strength, Ultimate: 85.0 MPa
$ 1737/MT
- Density: 1.23 g/cc
- Water Absorption: 0.63 %
- Moisture Absorption at Equilibrium: 0.18 %
- Melt Flow: 5.781 g/10 min @Load 2.16 kg, Temperature 240 °C
- Hardness, Shore D: 63
$ 1817/MT
- Density: 1.34 g/cc
- Water Absorption: 6.5 %
- Moisture Absorption: 2.00 %
- Linear Mold Shrinkage, Flow: 0.011 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
$ 1530/MT
- Density: 1.14 g/cc
- Moisture Absorption: 3.50 %
- Viscosity: 70000 cP @Shear Rate 10000 1/s, Temperature 240 °C
- Viscosity: 70000 cP @Shear Rate 10000 1/s, Temperature 260 °C
- Viscosity: 70000 cP @Shear Rate 10000 1/s, Temperature 280 °C
$ 1936/MT
- Density: 1.34 g/cc
- Moisture Absorption: 0.300 %
- Viscosity Measurement: 1.73
- Viscosity Test: 85 cm³/g
- Melting Point: 255 °C
$ 1495/MT
- Density: 1.27 g/cc
- Water Absorption: 7.2 %
- Moisture Absorption at Equilibrium: 2.15 %
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 3.5 %
$ 1841/MT
- Density: 1.17 g/cc
- Water Absorption: 9.0 %
- Moisture Absorption at Equilibrium: 2.5 %
- Tensile Strength, Yield: 40.0 MPa
- Elongation at Break: >= 50 %
$ 1460/MT
- Density: 1.40 g/cc
- Water Absorption: 5.9 %
- Moisture Absorption at Equilibrium: 1.8 %
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 4.5 %
$ 1799/MT
- Density: 1.37 g/cc
- Water Absorption: 6.1 %
- Moisture Absorption: 1.60 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
$ 1478/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.5 %
- Viscosity Test: 244 cm³/g
- Melting Point: 220 °C
$ 1808/MT
- Density: 1.42 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Viscosity Test: 145 cm³/g
- Tensile Strength at Break: 140 MPa
$ 1824/MT
- Density: 1.16 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption: 0.400 %
- Melt Flow: 32 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 32 @Time 3.00 sec
$ 1656/MT
- Density: 1.36 g/cc
- Water Absorption: 6.0 %
- Moisture Absorption at Equilibrium: 1.6 %
- Tensile Strength at Break: 190 MPa
- Elongation at Break: 3.0 %
$ 1993/MT
- Density: 1.16 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption: 0.400 %
- Melt Flow: 13.5 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 13.1 MPa
$ 1582/MT
- Density: 1.20 g/cc
- Water Absorption: 6.8 %
- Moisture Absorption at Equilibrium: 2.0 %
- Tensile Strength at Break: 105 MPa
- Elongation at Break: 4.0 %
$ 1945/MT
- Density: 1.22 g/cc
- Moisture Absorption: 3.15 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Tensile Strength, Ultimate: 110 MPa
$ 1582/MT
- Density: 1.34 g/cc
- Moisture Absorption: 1.50 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Tensile Strength, Ultimate: 115 MPa
$ 2509/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption: 2.50 %
- Viscosity Test: 152 cm³/g
- Melting Point: 220 °C
$ 1716/MT
- Density: 1.37 g/cc
- Water Absorption: 6.9 %
- Moisture Absorption: 2.40 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0075 cm/cm
$ 2094/MT
- Density: 1.11 g/cc
- Water Absorption: 0.75 %
- Moisture Absorption at Equilibrium: 0.30 %
- Melt Flow: 22.3 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 33.3 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1783/MT
- Density: 1.34 g/cc
- Moisture Absorption: 1.50 %
- Linear Mold Shrinkage, Flow: 0.0065 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Tensile Strength, Ultimate: 65.0 MPa
$ 1877/MT
- Density: 1.63 g/cc
- Moisture Absorption: 1.80 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0125 cm/cm
- Tensile Strength, Ultimate: 160 MPa
$ 2425/MT
- Density: 1.56 g/cc
- Water Absorption: 4.5 %
- Moisture Absorption at Equilibrium: 1.4 %
- Tensile Strength at Break: 160 MPa
- Elongation at Break: 3.5 %
DSM Stanyl® 46HF4130 (DAM) Nylon 46 30% Glass Reinforced, Heat Stabilized, High Flow (North America)
$ 1943/MT
- Density: 1.41 g/cc
- Tensile Strength at Break: 210 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 10.0 GPa
- Charpy Impact Unnotched: 6.00 J/cm²
$ 1451/MT
- Density: 1.13 g/cc
- Viscosity: 300000 cP @Shear Rate 1000 1/s, Temperature 240 °C
- Viscosity: 300000 cP @Shear Rate 1000 1/s, Temperature 260 °C
- Viscosity: 300000 cP @Shear Rate 1000 1/s, Temperature 280 °C
- Viscosity: 1.00e+6 cP @Shear Rate 0.100 1/s, Temperature 280 °C
$ 1642/MT
- Density: 1.34 g/cc
- Water Absorption: 6.5 %
- Moisture Absorption: 2.00 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
$ 1584/MT
- Density: 1.50 g/cc
- Water Absorption: 5.0 %
- Moisture Absorption at Equilibrium: 1.1 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
$ 1939/MT
- Density: 1.35 g/cc
- Water Absorption: 6.3 %
- Moisture Absorption at Equilibrium: 1.9 %
- Tensile Strength at Break: 110 MPa
- Elongation at Break: 5.0 %
$ 2153/MT
- Density: 1.34 g/cc
- Moisture Absorption at Equilibrium: 0.30 %
- Melt Flow: 8.04 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: >= 50 %
$ 1545/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.3 %
- Linear Mold Shrinkage, Flow: 0.0095 cm/cm
- Linear Mold Shrinkage, Flow: 0.0095 cm/cm
$ 1628/MT
- Density: 1.13 g/cc
- Water Absorption: 10 %
- Moisture Absorption at Equilibrium: 3.0 %
- Charpy Impact Unnotched: NB @Temperature -30.0 °C
- Charpy Impact Unnotched: NB @Temperature 23.0 °C
$ 1707/MT
- Density: 1.45 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 0.15 %
- Melt Flow: 33.35 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 110 MPa
$ 2129/MT
- Density: 1.23 g/cc
- Moisture Absorption: 3.00 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Tensile Strength, Ultimate: 70.0 MPa
$ 1478/MT
- Density: 1.38 g/cc
- Water Absorption: 6.3 %
- Moisture Absorption at Equilibrium: 1.9 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
$ 1503/MT
- Density: 1.35 g/cc
- Water Absorption: 6.3 %
- Moisture Absorption: 1.90 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
$ 1624/MT
- Density: 1.18 g/cc
- Moisture Absorption: 3.70 %
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.020 cm/cm
- Tensile Strength, Yield: 55.0 MPa
$ 1637/MT
- Density: 1.15 g/cc
- Water Absorption: 0.70 %
- Moisture Absorption at Equilibrium: 0.30 %
- Melt Flow: 12.1 g/10 min @Load 10.0 kg, Temperature 230 °C
- Hardness, Shore D: 41
Delivery Thermoplastic DSM Engineering Plastics
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):| Country | 20’ Container | 40’ Container | 5,000 MT |
|---|---|---|---|
| 🇦🇺 Australia | $3345 | $4181 | $401400 |
| 🇦🇹 Austria | $2825 | $3531 | $339000 |
| 🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
| 🇦🇱 Albania | $2500 | $3125 | $300000 |
| 🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
| 🇦🇴 Angola | $2762.5 | $3453 | $331500 |
| 🇦🇷 Argentina | $3230 | $4038 | $387600 |
| 🇦🇲 Armenia | $2625 | $3281 | $315000 |
| 🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
| 🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
| 🇧🇭 Bahrain | $3095 | $3869 | $371400 |
| 🇧🇾 Belarus | $2825 | $3531 | $339000 |
| 🇧🇿 Belize | $3155 | $3944 | $378600 |
| 🇧🇪 Belgium | $2575 | $3219 | $309000 |
| 🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
| 🇧🇴 Bolivia | $3230 | $4038 | $387600 |
| 🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
| 🇧🇷 Brazil | $3120 | $3900 | $374400 |
| 🇭🇺 Hungary | $2575 | $3219 | $309000 |
| 🇻🇪 Venezuela | $3230 | $4038 | $387600 |
| 🇻🇳 Vietnam | $2625 | $3281 | $315000 |
| 🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
| 🇬🇹 Guatemala | $3230 | $4038 | $387600 |
| 🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
| 🇩🇪 Germany | $2475 | $3094 | $297000 |
| 🇭🇳 Honduras | $3230 | $4038 | $387600 |
| 🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
| 🇬🇷 Greece | $2575 | $3219 | $309000 |
| 🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
| 🇩🇰 Denmark | $2400 | $3000 | $288000 |
| 🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
| 🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
| 🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
| 🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
| 🇮🇱 Israel | $2625 | $3281 | $315000 |
| 🇮🇳 India | $3712.5 | $4641 | $445500 |
| 🇮🇩 Indonesia | $3095 | $3869 | $371400 |
| 🇯🇴 Jordan | $2625 | $3281 | $315000 |
| 🇮🇶 Iraq | $2625 | $3281 | $315000 |
| 🇮🇷 Iran | $3095 | $3869 | $371400 |
| 🇮🇪 Ireland | $2500 | $3125 | $300000 |
| 🇮🇸 Iceland | $2575 | $3219 | $309000 |
| 🇪🇸 Spain | $2500 | $3125 | $300000 |
| 🇮🇹 Italy | $2400 | $3000 | $288000 |
| 🇾🇪 Yemen | $2625 | $3281 | $315000 |
| 🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
| 🇰🇭 Cambodia | $3095 | $3869 | $371400 |
| 🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
| 🇨🇦 Canada | $3230 | $4038 | $387600 |
| 🇶🇦 Qatar | $2625 | $3281 | $315000 |
| 🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
| 🇨🇾 Cyprus | $2625 | $3281 | $315000 |
| 🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
| 🇨🇳 China | $3712.5 | $4641 | $445500 |
| 🇨🇴 Colombia | $3230 | $4038 | $387600 |
| 🇰🇷 Korea South | $2625 | $3281 | $315000 |
| 🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
| 🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
| 🇨🇺 Cuba | $3230 | $4038 | $387600 |
| 🇰🇼 Kuwait | $2625 | $3281 | $315000 |
| 🇱🇻 Latvia | $2575 | $3219 | $309000 |
| 🇱🇧 Lebanon | $2625 | $3281 | $315000 |
| 🇱🇾 Libya | $2762.5 | $3453 | $331500 |
| 🇱🇹 Lithuania | $2500 | $3125 | $300000 |
| 🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
| 🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
| 🇲🇾 Malaysia | $2625 | $3281 | $315000 |
| 🇲🇹 Malta | $2500 | $3125 | $300000 |
| 🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
| 🇲🇽 Mexico | $3155 | $3944 | $378600 |
| 🇲🇩 Moldova | $2400 | $3000 | $288000 |
| 🇲🇨 Monaco | $2475 | $3094 | $297000 |
| 🇲🇳 Mongolia | $2625 | $3281 | $315000 |
| 🇲🇲 Myanmar | $2625 | $3281 | $315000 |
| 🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
| 🇳🇵 Nepal | $2625 | $3281 | $315000 |
| 🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
| 🇳🇱 Netherlands | $2575 | $3219 | $309000 |
| 🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
| 🇳🇿 New Zealand | $3345 | $4181 | $401400 |
| 🇳🇴 Norway | $2400 | $3000 | $288000 |
| 🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
| 🇴🇲 Oman | $2625 | $3281 | $315000 |
| 🇵🇰 Pakistan | $2625 | $3281 | $315000 |
| 🇵🇦 Panama | $3230 | $4038 | $387600 |
| 🇵🇾 Paraguay | $3155 | $3944 | $378600 |
| 🇵🇪 Peru | $3230 | $4038 | $387600 |
| 🇵🇱 Poland | $2575 | $3219 | $309000 |
| 🇵🇹 Portugal | $2500 | $3125 | $300000 |
| 🇷🇺 Russia | $2575 | $3219 | $309000 |
| 🇷🇴 Romania | $2475 | $3094 | $297000 |
| 🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
| 🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
| 🇷🇸 Serbia | $2575 | $3219 | $309000 |
| 🇸🇬 Singapore | $3095 | $3869 | $371400 |
| 🇸🇾 Syria | $3095 | $3869 | $371400 |
| 🇸🇰 Slovakia | $2500 | $3125 | $300000 |
| 🇸🇮 Slovenia | $2500 | $3125 | $300000 |
| 🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
| 🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
| 🇺🇸 United States | $2902.5 | $3628 | $348300 |
| 🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
| 🇹🇭 Thailand | $2625 | $3281 | $315000 |
| 🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
| 🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
| 🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
| 🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
| 🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
| 🇹🇷 Turkey | $2625 | $3281 | $315000 |
| 🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
| 🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
| 🇺🇦 Ukraine | $2500 | $3125 | $300000 |
| 🇺🇾 Uruguay | $2675 | $3344 | $321000 |
| 🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
| 🇵🇭 Philippines | $2625 | $3281 | $315000 |
| 🇫🇮 Finland | $2500 | $3125 | $300000 |
| 🇫🇷 France | $2575 | $3219 | $309000 |
| 🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
| 🇲🇪 Montenegro | $2575 | $3219 | $309000 |
| 🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
| 🇨🇱 Chile | $3355 | $4194 | $402600 |
| 🇨🇭 Switzerland | $2575 | $3219 | $309000 |
| 🇸🇪 Sweden | $2500 | $3125 | $300000 |
| 🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
| 🇪🇨 Ecuador | $3155 | $3944 | $378600 |
| 🇦🇸 American Samoa | $3345 | $4181 | $401400 |
| 🇸🇻 El Salvador | $3230 | $4038 | $387600 |
| 🇪🇪 Estonia | $2575 | $3219 | $309000 |
| 🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
| 🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
| 🇯🇵 Japan | $3095 | $3869 | $371400 |
| 🇦🇩 Andorra | $2500 | $3125 | $300000 |
| 🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
| 🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
| 🇧🇧 Barbados | $3230 | $4038 | $387600 |
| 🇧🇹 Bhutan | $3095 | $3869 | $371400 |
| 🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
| 🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
| 🇧🇳 Brunei | $2625 | $3281 | $315000 |
| 🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
| 🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
| 🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
| 🇹🇩 Chad | $2762.5 | $3453 | $331500 |
| 🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
| 🇧🇯 Benin | $2762.5 | $3453 | $331500 |
| 🇩🇲 Dominica | $3230 | $4038 | $387600 |
| 🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
| 🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
| 🇫🇯 Fiji | $3345 | $4181 | $401400 |
| 🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
| 🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
| 🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
| 🇰🇮 Kiribati | $3345 | $4181 | $401400 |
| 🇬🇩 Grenada | $3355 | $4194 | $402600 |
| 🇬🇺 Guam | $3345 | $4181 | $401400 |
| 🇬🇾 Guyana | $3230 | $4038 | $387600 |
| 🇭🇹 Haiti | $3120 | $3900 | $374400 |
| 🇯🇲 Jamaica | $3230 | $4038 | $387600 |
| 🇰🇵 Korea, North | $2625 | $3281 | $315000 |
| 🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
| 🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
| 🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
| 🇲🇻 Maldives | $2625 | $3281 | $315000 |
| 🇲🇱 Mali | $2762.5 | $3453 | $331500 |
| 🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
| 🇨🇼 Curaçao | $3230 | $4038 | $387600 |
| 🇦🇼 Aruba | $3120 | $3900 | $374400 |
| 🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
| 🇳🇪 Niger | $2762.5 | $3453 | $331500 |
| 🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
| 🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
| 🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
| 🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
| 🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
| 🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
| 🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
| 🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
| 🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
| 🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
| 🇸🇲 San Marino | $2500 | $3125 | $300000 |
| 🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
| 🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
| 🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
| 🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
| 🇸🇷 Suriname | $3230 | $4038 | $387600 |
| 🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
| 🇹🇬 Togo | $2762.5 | $3453 | $331500 |
| 🇹🇴 Tonga | $3345 | $4181 | $401400 |
| 🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
| 🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
| 🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, cruise ships sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.
