Hexion Bakelite™ PF 13591 Phenolic Formaldehyde Resin, High Surface Quality, UL Listed (discontinued **) price 2020 per MT

Physical Properties
Density
1.41 g/cc
Apparent Bulk Density
0.620 g/cc
Linear Mold Shrinkage, Flow
0.0065 cm/cm

Mechanical Properties
Flexural Strength
90.0 MPa
Flexural Modulus
7.00 GPa
Charpy Impact Unnotched
0.550 J/cm² @Temperature 23.0 °C
Charpy Impact, Notched
0.130 J/cm² @Temperature 23.0 °C

Thermal Properties
Deflection Temperature at 8.0 MPa
105 °C
UL RTI, Electrical
150 °C @Thickness 1.50 mm
UL RTI, Mechanical with Impact
150 °C @Thickness 1.50 mm
UL RTI, Mechanical without Impact
150 °C @Thickness 1.50 mm
Flammability, UL94
V-1 @Thickness 1.50 mm
Flammability, UL94
V-0 @Thickness 3.00 mm
Shrinkage
0.650 % @Temperature 110 °C

Electrical Properties
Volume Resistivity
1.00e+11 ohm-cm
Surface Resistance
1.00e+10 ohm
Dielectric Constant
15 @Frequency 100 Hz
Dielectric Strength
15.0 kV/mm @Thickness 1.00 mm
Dissipation Factor
0.40 @Frequency 100 Hz
Arc Resistance
60 - 120 sec @Thickness 3.00 mm
High Voltage Arc Resistance to Ignition (HVAR)
>= 300 sec @Thickness 1.50 mm
Comparative Tracking Index
100 - 175 V @Thickness 3.00 mm
Hot Wire Ignition, HWI
>= 120 sec @Thickness 1.50 mm
High Amp Arc Ignition, HAI
30 - 60 arcs @Thickness 1.50 mm
High Amp Arc Ignition, HAI
60 - 120 arcs @Thickness 3.00 mm
High Voltage Arc-Tracking Rate, HVTR
0.000 - 10.0 mm/min @Thickness 1.50 mm

Processing Properties
Feed Temperature
60.0 - 75.0 °C
Nozzle Temperature
80.0 - 100 °C
Melt Temperature
80.0 - 100 °C
Mold Temperature
160 - 190 °C
Mold Temperature
160 - 190 °C
Injection Pressure
>= 15.0 MPa
Back Pressure
0.500 - 2.00 MPa
Cure Time
0.167 - 0.333 min
Cure Time
0.333 - 0.667 min

Descriptive Properties
Chromatic Spectrum
Subdued Colors
Creep Rupture Strength
Good
Holding Pressure
Approximately 40-60% of injection pressure
Media Resistance
Good
Moisture Absorption
80 mg
Reserves by Peak Temperature
High
Thermal Expansion
Slight

Alternative products

Hexion Bakelite™ PF 2855 Phenolic Formaldehyde Resin, High Surface Quality, Low Shrinkage, For Electrostatic Coating, Dishwasher Proof, UL Listed accurate 69%

$ 1985/MT

Density: 1.51 g/cc
Apparent Bulk Density: 0.770 g/cc
Linear Mold Shrinkage, Flow: 0.0050 cm/cm
Flexural Strength: 90.0 MPa
Flexural Modulus: 8.50 GPa

Hexion Bakelite™ PF 2137 Phenolic Formaldehyde Resin, High Surface Quality, Dishwasher Proof (discontinued ** accurate 69%

$ 1821/MT

Density: 1.42 g/cc
Apparent Bulk Density: 0.620 g/cc
Linear Mold Shrinkage, Flow: 0.0040 cm/cm
Linear Mold Shrinkage, Flow: 0.0090 cm/cm
Ball Indentation Hardness: 350 MPa

Hexion Bakelite™ PF 14694 Phenolic Formaldehyde Resin, High Surface Quality (discontinued **) accurate 89%

$ 2239/MT

Density: 1.41 g/cc
Apparent Bulk Density: 0.610 g/cc
Linear Mold Shrinkage, Flow: 0.0065 cm/cm
Flexural Strength: 90.0 MPa
Flexural Modulus: 7.50 GPa

Hexion Bakelite™ PF 83 Phenolic Formaldehyde Resin, Special Preparation Cylindrical Pellets (discontinued **) accurate 89%

$ 1895/MT

Density: 1.42 g/cc
Apparent Bulk Density: 0.600 g/cc
Linear Mold Shrinkage, Flow: 0.0035 cm/cm
Ball Indentation Hardness: 250 MPa
Flexural Strength: 90.0 MPa

Hexion Bakelite™ PF 14600 Phenolic Formaldehyde Resin, High Surface Quality (discontinued **) accurate 79%

$ 2467/MT

Density: 1.37 g/cc
Apparent Bulk Density: 0.550 g/cc
Linear Mold Shrinkage, Flow: 0.0065 cm/cm
Flexural Strength: 95.0 MPa
Flexural Modulus: 7.00 GPa

Hexion Bakelite™ PF 1141 Phenolic Formaldehyde Resin, High Surface Quality, Resistant to High Temperatures, Dishwasher Proof accurate 69%

$ 1530/MT

Density: 1.51 g/cc
Apparent Bulk Density: 0.770 g/cc
Linear Mold Shrinkage, Flow: 0.0050 cm/cm
Ball Indentation Hardness: 350 MPa
Flexural Strength: 90.0 MPa

Hexion Bakelite™ PF 31 Phenolic Formaldehyde Resin, UL Listed (discontinued **) accurate 69%

$ 2167/MT

Density: 1.42 g/cc
Apparent Bulk Density: 0.630 g/cc
Linear Mold Shrinkage, Flow: 0.0040 cm/cm
Linear Mold Shrinkage, Flow: 0.0080 cm/cm
Ball Indentation Hardness: 325 MPa

Hexion Bakelite™ PF 51 Phenolic Formaldehyde Resin, Special Preparation Cylindrical Pellets (discontinued **) accurate 79%

$ 1482/MT

Density: 1.41 g/cc
Apparent Bulk Density: 0.600 g/cc
Linear Mold Shrinkage, Flow: 0.0035 cm/cm
Ball Indentation Hardness: 300 MPa
Flexural Strength: 85.0 MPa

Hexion Bakelite™ X30 Phenolic Formaldehyde Resin (discontinued **) accurate 79%

$ 1868/MT

Density: 1.40 g/cc
Apparent Bulk Density: 0.460 g/cc
Linear Mold Shrinkage, Flow: 0.0055 cm/cm
Ball Indentation Hardness: 250 MPa
Tensile Strength at Break: 50.0 MPa

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, vessels for sale turkey. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for Hexion Bakelite™ PF 13591 Phenolic Formaldehyde Resin, High Surface Quality, UL Listed (discontinued **)

Seller from Baghdad – 2021-03-09:

Seller from Baghdad work with company: Solvay, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2475 per MT

Seller from Rio de Janeiro – 2021-08-04:

Seller from Rio de Janeiro work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2020 per MT

Seller from Cairo – 2021-06-24:

Seller from Cairo work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2468 per MT