Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 1185°C heat treatment, rapid air cooled price 1534 per MT

Physical Properties
Density
8.20 g/cc

Mechanical Properties
Hardness, Brinell
159
Hardness, Knoop
176
Hardness, Rockwell B
92
Hardness, Vickers
201
Tensile Strength, Ultimate
798 MPa
Elongation at Break
50 %
Poissons Ratio
0.298
Poissons Ratio
0.315 @Temperature 426 °C
Poissons Ratio
0.319 @Temperature -78.0 °C
Poissons Ratio
0.325 @Temperature 650 °C
Poissons Ratio
0.339 @Temperature 816 °C

Thermal Properties
CTE, linear
15.3 µm/m-°C @Temperature 23.0 - 300 °C
CTE, linear
15.6 µm/m-°C @Temperature 23.0 - 400 °C
CTE, linear
16.0 µm/m-°C @Temperature 23.0 - 500 °C
CTE, linear
16.7 µm/m-°C @Temperature 23.0 - 600 °C
CTE, linear
17.2 µm/m-°C @Temperature 23.0 - 700 °C
CTE, linear
17.5 µm/m-°C @Temperature 23.0 - 800 °C
CTE, linear
17.8 µm/m-°C @Temperature 23.0 - 900 °C
CTE, linear
17.8 µm/m-°C @Temperature 23.0 - 1000 °C
CTE, linear
18.4 µm/m-°C @Temperature 23.0 - 1100 °C
Specific Heat Capacity
0.435 J/g-°C @Temperature >=100 °C
Thermal Conductivity
15.9 W/m-K @Temperature 300 °C
Thermal Conductivity
17.3 W/m-K @Temperature 400 °C
Thermal Conductivity
18.6 W/m-K @Temperature 500 °C
Thermal Conductivity
20.0 W/m-K @Temperature 600 °C
Thermal Conductivity
20.0 W/m-K @Temperature 200 °C
Melting Point
1288 - 1354 °C
Solidus
1288 °C
Liquidus
1354 °C

Optical Properties
Emissivity (0-1)
0.88 @Temperature 1090 °C

Component Elements Properties
Carbon, C
0.080 - 0.16 %
Cb + Ta
0.75 - 1.25 %
Chromium, Cr
20 - 22.5 %
Cobalt, Co
18.5 - 21 %
Iron, Fe
33 %
Manganese, Mn
1.0 - 2.0 %
Molybdenum, Mo
2.5 - 3.5 %
Nickel, Ni
19 - 21 %
Nitrogen, N
0.10 - 0.20 %
Silicon, Si
<= 1.0 %
Tungsten, W
2.0 - 3.0 %

Electrical Properties
Electrical Resistivity
0.0000930 ohm-cm @Temperature 22.0 °C

Alternative products

Haynes Multimet® alloy, 12.7 mm (1/2 in.) thick plate, 1185°C heat treatment, water quenched accurate 79%

$ 2187/MT

Density: 8.20 g/cc
Tensile Strength, Ultimate: 949 MPa @Temperature -78.0 °C
Tensile Strength, Ultimate: 1311 MPa @Temperature -196 °C
Tensile Strength, Yield: 513 MPa @Strain 0.200 %, Temperature -78.0 °C
Elongation at Break: 53 % @Temperature -196 °C

Haynes Multimet® alloy, GTAW, 3.2 mm sheet accurate 79%

$ 1611/MT

Density: 8.20 g/cc
Tensile Strength, Ultimate: 746 MPa
Elongation at Break: 22 %
Poissons Ratio: 0.298
Poissons Ratio: 0.315 @Temperature 426 °C

Haynes Multimet® alloy, investment-cast, as-cast accurate 79%

$ 2096/MT

Density: 8.20 g/cc
Hardness, Brinell: 241
Hardness, Knoop: 255
Hardness, Rockwell C: 21
Hardness, Vickers: 247

Haynes Multimet® alloy, 12.7-50.8 mm hot-rolled bar, 1185°C heat treatment, water quenched accurate 79%

$ 1603/MT

Density: 8.20 g/cc
Hardness, Brinell: 190
Hardness, Knoop: 211
Hardness, Vickers: 199
Tensile Strength, Ultimate: 767 MPa

Haynes Multimet® alloy, 25.4-50.8 mm forged bar, 1185°C heat treatment, water quenched accurate 89%

$ 1589/MT

Density: 8.20 g/cc
Hardness, Brinell: 159
Hardness, Knoop: 176
Hardness, Rockwell B: 92
Hardness, Vickers: 201

Haynes Multimet® alloy, 1.32 mm thick sheet, 1177°C heat treatment, rapid air cooled accurate 89%

$ 1517/MT

Density: 8.20 g/cc
Hardness, Brinell: 159
Hardness, Knoop: 176
Hardness, Rockwell B: 92
Hardness, Vickers: 201

Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 5% cold reduction accurate 89%

$ 1909/MT

Density: 8.20 g/cc
Hardness, Brinell: 159
Hardness, Knoop: 176
Hardness, Rockwell B: 92
Hardness, Vickers: 201

Haynes Multimet® alloy, SMAW, 3.2 mm sheet accurate 79%

$ 1984/MT

Density: 8.20 g/cc
Tensile Strength, Ultimate: 800 MPa
Elongation at Break: 27 %
Poissons Ratio: 0.298
Poissons Ratio: 0.315 @Temperature 426 °C

Haynes Multimet® alloy, 533.4 by 82.55 mm forging, stress relieved at 649°C (1200°F), air cooled accurate 79%

$ 2005/MT

Density: 8.20 g/cc
Tensile Strength, Ultimate: 811 MPa
Tensile Strength, Ultimate: 572 MPa @Temperature 649 °C
Tensile Strength, Yield: 493 MPa @Strain 0.200 %
Tensile Strength, Yield: 338 MPa @Strain 0.200 %, Temperature 649 °C

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, container ship sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

2 prices for Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 1185°C heat treatment, rapid air cooled

Seller from Kolkata – 2021-04-01:

Seller from Kolkata work with company: Exxon Chemical, SABIC Innovative Plastics (GE Plastics), LG Chemical, ALIMEX GmbH

Price: $1534 per MT

Seller from Hong Kong – 2021-08-09:

Seller from Hong Kong work with company: Celanese Corporation, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1613 per MT