$ 1681/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 71.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1834/MT
- Solids Content: 50 %
- pH: 8.0
- Glass Transition Temp, Tg: 7.00 °C
$ 2091/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 2.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 102
- Tensile Strength, Ultimate: 35.2 MPa
$ 1687/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 22 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 118
- Tensile Strength, Ultimate: 65.5 MPa
$ 1506/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength at Break: 71.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1542/MT
- Solids Content: 49 %
- pH: 7.5
- Glass Transition Temp, Tg: -6.00 °C
$ 1835/MT
- Solids Content: 49 %
- pH: 7.5
- Glass Transition Temp, Tg: -27.0 °C
$ 2387/MT
- Density: 1.06 g/cc
- Melt Density: 1.08 g/cc
- Maximum Moisture Content: 0.10
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
- Melt Flow: 2.0 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1468/MT
- Density: 1.04 g/cc
- Melt Density: 0.911 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 2.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 101
$ 1446/MT
- Density: 1.05 g/cc
- Apparent Bulk Density: 0.650 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
- Melt Flow: 4.5 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength, Yield: 37.0 MPa @Thickness 3.20 mm
$ 2011/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
- Melt Flow: 18 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Yield: 57.9 MPa
- Tensile Strength, Yield: 58.0 MPa
$ 2210/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 71.0 MPa
- Tensile Strength, Yield: 62.1 MPa
$ 1518/MT
- Density: 1.05 g/cc
- Apparent Bulk Density: 0.690 g/cc
- Linear Mold Shrinkage, Flow: 0.0053 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0052 cm/cm
- Melt Flow: 3.1 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1478/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 2.6 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 34.5 MPa
- Tensile Strength, Yield: 37.2 MPa
$ 1755/MT
- Density: 1.10 g/cc
- Water Absorption: 0.20 - 0.60 %
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Melt Flow: 2.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 9.5 g/10 min @Load 5.00 kg, Temperature 250 °C
$ 1938/MT
- Density: 1.20 g/cc
- Water Absorption: 0.25 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 2183/MT
- Specific Gravity: 1.37 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Melt Flow: 8.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 79.3 MPa
$ 2000/MT
- Solids Content: 51 %
- pH: 7.5
- Glass Transition Temp, Tg: 1.00 °C
$ 2259/MT
- Density: 1.20 g/cc
- Melt Density: 1.00 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0060 cm/cm
$ 1517/MT
- Density: 1.07 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0040 cm/cm
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 9.00 MPa
- Tensile Strength, Yield: 45.0 MPa
$ 2042/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 5.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 41.4 MPa
- Tensile Strength, Yield: 49.6 MPa
$ 1752/MT
- Solids Content: 48 %
- pH: 8.7
- Glass Transition Temp, Tg: 0.000 °C
$ 1454/MT
- Density: 1.20 g/cc
- Melt Flow: 5.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 65.0 MPa
- Tensile Strength, Yield: 66.0 MPa
- Elongation at Break: 100 %
$ 1503/MT
- Density: 1.04 g/cc
- Melt Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 2.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 33.1 MPa
$ 2570/MT
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Yield: 60.0 MPa
- Elongation at Break: 120 %
- Elongation at Yield: 6.0 %
- Tensile Modulus: 2.30 GPa
$ 2351/MT
- Density: 1.14 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0070 cm/cm
- Melt Flow: 3.0 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1544/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 118
- Tensile Strength, Ultimate: 71.0 MPa
$ 1501/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Flow: 18 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Yield: 57.9 MPa
- Elongation at Break: 110 %
$ 1500/MT
- Specific Gravity: 1.21 g/cc
- Water Absorption: 0.050 %
- Water Absorption at Saturation: 0.18 %
- Linear Mold Shrinkage: 0.0065 cm/cm
- Melt Flow: 1.5 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1538/MT
- Density: 1.12 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0070 cm/cm
- Melt Flow: 5.0 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1551/MT
- Solids Content: 48.5 %
- pH: 8.5
- Glass Transition Temp, Tg: 4.00 °C
$ 1495/MT
- Density: 1.22 g/cc
- Melt Density: 1.10 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 11 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 30.3 MPa
$ 1846/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 2.6 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 104
- Tensile Strength, Ultimate: 35.9 MPa
$ 1784/MT
- Specific Gravity: 1.20 g/cc
- Water Absorption: 0.15 %
- Water Absorption at Saturation: 0.32 %
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1549/MT
- Density: 0.965 g/cc
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 16.2 MPa
- Elongation at Yield: 10 %
- Flexural Modulus: 0.862 GPa
$ 1624/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 22 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1663/MT
- Density: 1.13 g/cc
- Melt Density: 0.962 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0070 cm/cm
$ 1466/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1805/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 3.0 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 2073/MT
- Solids Content: 50 %
- pH: 8.0
- Glass Transition Temp, Tg: 7.00 °C
$ 1586/MT
- Specific Gravity: 1.20 g/cc
- Water Absorption: 0.15 %
- Water Absorption at Saturation: 0.32 %
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1984/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 118
- Tensile Strength, Ultimate: 71.0 MPa
$ 1924/MT
- Density: 1.20 g/cc
- Water Absorption: 0.20 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 58 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength at Break: 48.0 MPa
$ 2263/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Flow: 11 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Yield: 55.8 MPa
- Elongation at Break: 130 %
$ 1550/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 2.2 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 41.4 MPa
- Elongation at Yield: 2.8 %
$ 1460/MT
- Bulk Density: 0.650 g/cc
- Density: 1.05 g/cc
- Melt Flow: 2.2 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 7.0 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 88
$ 1897/MT
- Solids Content: 46 %
- pH: 6.5
- Glass Transition Temp, Tg: -7.00 °C
$ 1737/MT
- Solids Content: 48 %
- pH: 8.8
- Glass Transition Temp, Tg: 45.0 °C
$ 2145/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 123
- Tensile Strength, Ultimate: 65.5 MPa
$ 1550/MT
- Solids Content: 49 %
- pH: 7.5
- Glass Transition Temp, Tg: 42.0 °C
$ 2271/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1480/MT
- Solids Content: 50.5 %
- pH: 5.7
- Glass Transition Temp, Tg: 10.0 °C
$ 1848/MT
- Density: 1.12 g/cc
- Melt Density: 1.01 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0070 cm/cm
$ 2512/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1461/MT
- Solids Content: 50 %
- pH: 9.0
- Glass Transition Temp, Tg: -5.00 °C
$ 1953/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 71.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 2256/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 20 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 95 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 47.0 MPa @Thickness 4.00 mm
$ 1928/MT
- Solids Content: 49 %
- pH: 8.0
- Glass Transition Temp, Tg: 24.0 °C
$ 1754/MT
- Solids Content: 50 %
- pH: 6.5
- Glass Transition Temp, Tg: 10.0 °C
$ 1812/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 6.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 34.5 MPa
- Tensile Strength, Yield: 43.4 MPa
$ 1634/MT
- Density: 1.14 g/cc
- Linear Mold Shrinkage: 0.0070 cm/cm
- Melt Flow: 2.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 48.3 MPa
- Tensile Strength, Yield: 51.7 MPa
$ 1550/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 3.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 108
- Tensile Strength, Yield: 44.8 MPa
$ 1490/MT
- Solids Content: 50.5 %
- pH: 6.5
- Glass Transition Temp, Tg: 10.0 °C
$ 1556/MT
- Solids Content: 49 %
- pH: 8.0
- Glass Transition Temp, Tg: 22.0 °C
$ 1531/MT
- Solids Content: 48 %
- pH: 7.0
- Glass Transition Temp, Tg: 45.0 °C
$ 1958/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 22 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 35.9 MPa
- Tensile Strength, Yield: 46.9 MPa
$ 2069/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Flow: 18 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Yield: 57.9 MPa
- Elongation at Break: 110 %
$ 1591/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 118
- Tensile Strength, Ultimate: 72.4 MPa
$ 2250/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 9.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 34.5 MPa
- Tensile Strength, Yield: 41.4 MPa
$ 1736/MT
- Density: 1.22 g/cc
- Tensile Strength, Yield: 135 MPa
- Elongation at Break: 2.2 %
- Tensile Modulus: 9.00 GPa
- Flexural Strength: 200 MPa
$ 2305/MT
- Specific Gravity: 1.13 g/cc
- Water Absorption: 0.53 %
- Linear Mold Shrinkage: >= 0.0060 cm/cm
- Melt Flow: 4.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 52.7 MPa
$ 1747/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell M: 73
- Hardness, Rockwell R: 118
$ 1501/MT
- Solids Content: 50 %
- pH: 7.0
- Glass Transition Temp, Tg: 8.00 °C
$ 2223/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1448/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 22 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1647/MT
- Solids Content: 48 %
- pH: 5.5
- Glass Transition Temp, Tg: 10.0 °C
$ 1938/MT
- Density: 1.12 g/cc
- Tensile Strength at Break: 110.0 MPa
- Elongation at Break: 2.3 %
- Elongation at Break: 3.0 %
- Tensile Modulus: 6.50 GPa
$ 1444/MT
- Solids Content: 50 %
- pH: 7.8
- Glass Transition Temp, Tg: 23.0 °C
$ 1712/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 123
- Tensile Strength, Ultimate: 58.6 MPa
$ 1734/MT
- Density: 1.062 g/cc
- Melt Flow: 2.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 43.8 MPa
- Elongation at Break: 5.0 %
- Flexural Modulus: 2.235 GPa
$ 1501/MT
- Density: 1.03 g/cc
- Melt Flow: 24 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
- Tensile Strength, Yield: 23.0 MPa
- Flexural Modulus: 2.399 GPa
$ 1626/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 3.9 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 108
- Tensile Strength, Yield: 30.3 MPa
$ 1467/MT
- Solids Content: 50 %
- pH: 6.5
- Glass Transition Temp, Tg: 16.0 °C
$ 1680/MT
- Solids Content: 52 %
- pH: 6.0
- Glass Transition Temp, Tg: 15.5 °C
$ 1632/MT
- Density: 1.27 g/cc
- Linear Mold Shrinkage, Transverse: 0.0020 - 0.0050 cm/cm
- Melt Flow: 8.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 58.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1812/MT
- Solids Content: 50 %
- pH: 5.5
- Glass Transition Temp, Tg: 6.00 °C
$ 2148/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 2.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 101
- Tensile Strength, Ultimate: 31.0 MPa
$ 1801/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Flow: 11 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Yield: 55.8 MPa
- Elongation at Break: 130 %
$ 1477/MT
- Bulk Density: 0.650 g/cc
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 4.7 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength, Yield: 37.0 MPa
$ 2090/MT
- Specific Gravity: 1.20 g/cc
- Water Absorption: 0.15 %
- Water Absorption at Saturation: 0.32 %
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1889/MT
- Solids Content: 46 %
- pH: 9.0
- Glass Transition Temp, Tg: -22.0 °C
$ 1474/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength at Break: 66.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1599/MT
- Density: 1.05 g/cc
- Apparent Bulk Density: 0.650 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
- Melt Flow: 4.7 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength, Yield: 37.0 MPa @Thickness 3.20 mm
$ 2132/MT
- Solids Content: 50 %
- pH: 8.5
- Glass Transition Temp, Tg: -9.00 °C
$ 1854/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 2197/MT
- Solids Content: 49 %
- pH: 8.5
- Glass Transition Temp, Tg: 12.0 °C
$ 1560/MT
- Density: 1.14 g/cc
- Melt Density: 1.02 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0070 cm/cm
$ 1494/MT
- Density: 1.27 g/cc
- Melt Density: 1.17 g/cc
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 122
$ 1525/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm
- Melt Flow: 10.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 46 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2023/MT
- Solids Content: 49 %
- pH: 6.5
- Glass Transition Temp, Tg: 41.0 °C
$ 1862/MT
- Solids Content: 56 %
- pH: 8.0
- Glass Transition Temp, Tg: -50.0 °C
$ 1661/MT
- Specific Gravity: 1.36 g/cc
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 122
- Tensile Strength, Ultimate: 82.7 MPa
$ 2568/MT
- Density: 1.04 g/cc
- Melt Density: 1.00 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 6.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 41.4 MPa
$ 1717/MT
- Solids Content: 50 %
- pH: 7.5
- Glass Transition Temp, Tg: 4.00 °C
$ 1457/MT
- Density: 1.20 g/cc
- Water Absorption: 0.20 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 58 g/10 min @Load 1.20 kg, Temperature 300 °C
- Izod Impact, Notched: 5.80 J/cm @Temperature 23.0 °C
$ 1806/MT
- Solids Content: 50 %
- pH: 6.3
- Glass Transition Temp, Tg: 6.00 °C
$ 1516/MT
- Density: 1.20 g/cc
- Melt Flow: 3.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 64.8 MPa
- Tensile Strength, Yield: 65.5 MPa
- Elongation at Break: 100 %
$ 1503/MT
- Density: 1.19 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0015 - 0.0025 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0035 - 0.0040 cm/cm
- Melt Flow: 1.6 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1515/MT
- Density: 1.04 g/cc
- Melt Density: 0.890 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 2.2 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 100
$ 1509/MT
- Specific Gravity: 1.27 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0020 - 0.0050 cm/cm
- Melt Flow: 8.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 122
$ 1452/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1702/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 8.5 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength at Break: 28.0 MPa
- Tensile Strength, Yield: 35.0 MPa
$ 1624/MT
- Solids Content: 50.5 %
- pH: 9.5
- Glass Transition Temp, Tg: -10.0 °C
$ 1526/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1865/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 6.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 109
- Tensile Strength, Ultimate: 34.5 MPa
$ 1793/MT
- Solids Content: 46 %
- pH: 8.0
- Glass Transition Temp, Tg: -17.0 °C
$ 1679/MT
- Solids Content: 56 %
- pH: 8.0
- Glass Transition Temp, Tg: -35.0 °C
$ 1762/MT
- Specific Gravity: 1.20 g/cc
- Water Absorption: 0.15 %
- Water Absorption at Saturation: 0.32 %
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 2359/MT
- Density: 1.13 g/cc
- Water Absorption: 0.53 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 53.0 MPa
$ 1857/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 71.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1503/MT
- Density: 1.06 g/cc
- Linear Mold Shrinkage, Flow: 0.0057 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0056 cm/cm
- Melt Flow: 2.1 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 47.0 MPa
$ 2079/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 71.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1623/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 15 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 37.9 MPa
- Elongation at Break: 110 %
$ 1444/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 2.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 34.5 MPa
- Tensile Strength, Yield: 42.7 MPa
$ 1575/MT
- Bulk Density: 0.650 g/cc
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength, Yield: 45.0 MPa
$ 2479/MT
- Specific Gravity: 1.20 g/cc
- Water Absorption: 0.15 %
- Water Absorption at Saturation: 0.32 %
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1506/MT
- Density: 1.14 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0070 cm/cm
- Melt Flow: 3.0 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1738/MT
- Specific Gravity: 1.33 g/cc
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Melt Flow: 5.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 100 MPa
- Elongation at Break: 4.0 %
$ 1998/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 5.6 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1535/MT
- Density: 1.33 g/cc
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 82.7 MPa
- Tensile Strength, Yield: 60.0 MPa
- Elongation at Break: 4.0 %
$ 1491/MT
- Density: 1.14 g/cc
- Melt Density: 1.02 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Melt Flow: 1.3 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 51.7 MPa
$ 1612/MT
- Solids Content: 50 %
- pH: 9.0
- Glass Transition Temp, Tg: 55.0 °C
$ 1889/MT
- Solids Content: 50 %
- pH: 7.5
- Glass Transition Temp, Tg: 20.0 °C
$ 1959/MT
- Density: 1.20 g/cc
- Melt Density: 1.00 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0060 cm/cm
$ 2251/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 71.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1590/MT
- Density: 1.05 g/cc
- Apparent Bulk Density: 0.650 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
- Melt Flow: 8.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 28 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1537/MT
- Density: 1.05 g/cc
- Apparent Bulk Density: 0.650 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
- Melt Flow: 8.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 28 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1566/MT
- Density: 1.05 g/cc
- Apparent Bulk Density: 0.650 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
- Melt Flow: 8.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 28 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1839/MT
- Density: 1.05 g/cc
- Apparent Bulk Density: 0.650 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
- Melt Flow: 8.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 28 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1839/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 2.6 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 37.9 MPa
- Elongation at Break: 50 %
$ 1945/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 15 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 37.9 MPa
- Elongation at Break: 110 %
$ 1606/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 2.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 47.6 MPa
- Elongation at Break: 15 %
$ 1548/MT
- Density: 1.23 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0090 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0080 cm/cm
- Melt Flow: 8.5 g/10 min @Load 5.00 kg, Temperature 260 °C
- Hardness, Rockwell R: 111 @Thickness 3.20 mm
$ 2192/MT
- Specific Gravity: 1.20 g/cc
- Water Absorption: 0.15 %
- Water Absorption at Saturation: 0.32 %
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 22 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1689/MT
- Solids Content: 50 %
- pH: 8.5
- Glass Transition Temp, Tg: -9.00 °C
$ 1686/MT
- Density: 1.10 g/cc
- Melt Flow: 2.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength at Break: 180 MPa
- Tensile Strength, Yield: 47.6 MPa
- Flexural Modulus: 2.18 GPa
$ 1526/MT
- Solids Content: 54 %
- pH: 7.0
- Glass Transition Temp, Tg: 24.0 °C
$ 1981/MT
- Density: 1.27 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.25 %
- Melt Flow: 8.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 122
$ 1465/MT
- Density: 1.20 g/cc
- Melt Density: 1.03 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0060 cm/cm
$ 1477/MT
- Density: 1.20 g/cc
- Melt Density: 1.01 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0060 cm/cm
$ 2562/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 123
- Tensile Strength, Ultimate: 58.6 MPa
$ 1651/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1719/MT
- Solids Content: 48.5 %
- pH: 10.7
- Glass Transition Temp, Tg: 14.0 °C
$ 1608/MT
- Solids Content: 52 %
- pH: 8.0
- Glass Transition Temp, Tg: 15.0 °C
$ 1755/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Melt Flow: 12 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 122
- Tensile Strength at Break: 82.7 MPa
$ 1777/MT
- Density: 1.04 g/cc
- Melt Density: 0.975 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 5.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 107
$ 1910/MT
- Density: 1.06 g/cc
- Apparent Bulk Density: 0.680 g/cc
- Linear Mold Shrinkage, Flow: 0.0057 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0056 cm/cm
- Melt Flow: 2.1 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 2028/MT
- Density: 1.29 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0095 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 5.00 kg, Temperature 260 °C
- Melt Flow: 13 g/10 min @Load 5.00 kg, Temperature 265 °C
$ 1623/MT
- Melt Flow: 3.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 17 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 44.0 MPa
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Break: 100 %
$ 2146/MT
- Density: 1.27 g/cc
- Linear Mold Shrinkage, Transverse: 0.0020 - 0.0050 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 57.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1637/MT
- Density: 1.27 g/cc
- Linear Mold Shrinkage, Transverse: 0.0020 - 0.0050 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 57.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 2561/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 6.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 104
- Tensile Strength, Yield: 44.8 MPa
$ 1486/MT
- Density: 0.897 g/cc
- Melt Flow: 27 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 19.6 MPa
- Flexural Modulus: 0.9660 GPa
- Charpy Impact, Notched: 0.540 J/cm² @Temperature -40.0 °C
$ 2545/MT
- Solids Content: 49 %
- pH: 7.5
- Glass Transition Temp, Tg: -6.00 °C
$ 2426/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 2.6 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 34.5 MPa
- Tensile Strength, Yield: 37.2 MPa
$ 2211/MT
- Density: 1.27 g/cc
- Linear Mold Shrinkage, Transverse: 0.0020 - 0.0050 cm/cm
- Melt Flow: 8.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 58.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1993/MT
- Density: 1.13 g/cc
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 18 g/10 min
- Melt Flow: 18 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1631/MT
- Solids Content: 47 %
- pH: 8.0
- Glass Transition Temp, Tg: -45.0 °C
$ 1904/MT
- Solids Content: 50 %
- pH: 8.0
- Glass Transition Temp, Tg: 7.00 °C
$ 1477/MT
- Density: 1.16 g/cc
- Water Absorption: 0.20 - 0.60 %
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Ball Indentation Hardness: 105 MPa
- Tensile Strength at Break: 53.0 MPa
$ 2178/MT
- Density: 0.980 g/cc
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 60
- Tensile Strength, Yield: 21.6 MPa
- Flexural Modulus: 1.40 GPa
$ 1556/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 19 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 123
- Tensile Strength, Ultimate: 58.6 MPa
$ 1564/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 12 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 35.2 MPa
- Tensile Strength, Yield: 43.4 MPa
$ 1463/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 123
- Tensile Strength, Ultimate: 65.5 MPa
$ 1907/MT
- Density: 1.14 g/cc
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Melt Flow: 1.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength at Break: 48.3 MPa
$ 2119/MT
- Solids Content: 46 %
- pH: 6.5
- Glass Transition Temp, Tg: 12.0 °C
$ 1652/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 72.4 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1573/MT
- Solids Content: 50 %
- pH: 7.7
- Glass Transition Temp, Tg: -10.0 °C
$ 2526/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1494/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 5.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 105
- Tensile Strength, Ultimate: 34.5 MPa
$ 1932/MT
- Bulk Density: 0.650 g/cc
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 10.0 kg, Temperature 220 °C
- Melt Flow: 11.55 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1646/MT
- Bulk Density: 0.650 g/cc
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 10.0 kg, Temperature 220 °C
- Melt Flow: 11.55 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1445/MT
- Density: 1.20 g/cc
- Melt Flow: 8.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Transmission, Visible: 60 %
- Transmission, Visible: 67 %
- Solar Heat Reduction: 10-11°C
- Solar Heat Reduction: 10-11°C
$ 1939/MT
- Density: 1.04 g/cc
- Melt Density: 0.890 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 6.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 44.8 MPa
$ 1459/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 118
- Tensile Strength, Ultimate: 71.0 MPa
$ 1461/MT
- Solids Content: 46 %
- pH: 8.5
- Glass Transition Temp, Tg: -30.0 °C
$ 1709/MT
- Density: 1.20 g/cc
- Melt Density: 1.01 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0060 cm/cm
$ 1610/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Melt Flow: 22 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 118
$ 1782/MT
- Specific Gravity: 1.20 g/cc
- Water Absorption: 0.15 %
- Water Absorption at Saturation: 0.32 %
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 19 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 2457/MT
- Specific Gravity: 1.20 g/cc
- Water Absorption: 0.15 %
- Water Absorption at Saturation: 0.32 %
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 22 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1808/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm
- Melt Flow: 11 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 101
$ 1510/MT
- Density: 0.930 g/cc
- Filler Content: 5 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Flow: 16.5 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 20.0 MPa
$ 2535/MT
- Density: 1.27 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.25 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1930/MT
- Solids Content: 47 %
- pH: 10
- Glass Transition Temp, Tg: 7.00 °C
$ 2570/MT
- Density: 1.27 g/cc
- Water Absorption: 0.25 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1454/MT
- Apparent Bulk Density: 0.690 g/cc
- Melt Flow: 6.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength at Break: 70.0 MPa
- Tensile Modulus: 3.70 GPa
- Flexural Strength: 97.0 MPa
$ 1502/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1731/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1517/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 2360/MT
- Density: 1.27 g/cc
- Linear Mold Shrinkage, Transverse: 0.0020 - 0.0050 cm/cm
- Melt Flow: 8.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 58.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1697/MT
- Density: 1.19 g/cc
- Melt Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 18 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Yield: 57.9 MPa
$ 1719/MT
- Solids Content: 50 %
- pH: 8.5
- Glass Transition Temp, Tg: 4.00 °C
$ 1450/MT
- Specific Gravity: 1.03 g/cc
- Maximum Moisture Content: 0.10
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 0.90 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 36.5 MPa @Thickness 3.20 mm
$ 1600/MT
- Density: 1.13 g/cc
- Melt Density: 0.998 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0070 cm/cm
$ 1899/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 19 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 118 @Thickness 3.20 mm
- Tensile Strength at Break: 44.1 MPa @Thickness 3.20 mm
$ 1881/MT
- Solids Content: 50 %
- pH: 6.0
- Glass Transition Temp, Tg: -54.0 °C
$ 1507/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 22 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 2026/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength at Break: 71.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 2324/MT
- Density: 1.046 g/cc
- Melt Flow: 1.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 33.6 MPa
- Elongation at Break: 60 %
- Flexural Modulus: 2.01 GPa
$ 1554/MT
- Solids Content: 45.5 %
- pH: 9.5
- Glass Transition Temp, Tg: -30.0 °C
$ 2084/MT
- Bulk Density: 0.650 g/cc
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 11 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength, Yield: 43.0 MPa
$ 2221/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1599/MT
- Density: 1.12 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0070 cm/cm
- Melt Flow: 5.0 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1576/MT
- Density: 1.12 g/cc
- Tensile Strength at Break: 105 MPa
- Elongation at Break: 2.3 %
- Elongation at Break: 29 %
- Tensile Modulus: 6.50 GPa
$ 2314/MT
- Density: 1.18 g/cc
- Melt Density: 1.05 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0040 cm/cm
$ 2110/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 6.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 104
- Tensile Strength, Yield: 41.4 MPa
$ 1467/MT
- Density: 1.27 g/cc
- Melt Flow: 8.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 59.0 MPa
- Tensile Strength, Yield: 60.0 MPa
- Elongation at Break: 6.0 %
$ 1486/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 2.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 40.0 MPa
- Tensile Strength, Yield: 47.6 MPa
$ 1569/MT
- Density: 1.18 g/cc
- Melt Density: 1.02 g/cc
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 11 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Yield: 55.8 MPa
$ 1570/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1721/MT
- Solids Content: 50 %
- pH: 6.0
- Glass Transition Temp, Tg: 9.00 °C
$ 1688/MT
- Solids Content: 50 %
- pH: 7.7
- Glass Transition Temp, Tg: -4.00 °C
$ 1716/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 123
- Tensile Strength, Ultimate: 58.6 MPa
$ 2026/MT
- Solids Content: 50 %
- pH: 6.3
- Glass Transition Temp, Tg: 6.00 °C
$ 1773/MT
- Density: 1.04 g/cc
- Melt Density: 0.882 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 7.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 107
$ 1460/MT
- Specific Gravity: 1.13 g/cc
- Water Absorption: 0.15 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 4.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 53.8 MPa
$ 2012/MT
- Density: 1.02 g/cc
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 24.8 MPa
- Flexural Modulus: 2.22 GPa
- Izod Impact, Notched (ISO): 3.80 kJ/m² @Temperature -30.0 °C
$ 1551/MT
- Density: 1.18 g/cc
- Melt Density: 1.12 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 9.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 31.7 MPa
$ 1447/MT
- Density: 1.05 g/cc
- Apparent Bulk Density: 0.650 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
- Melt Flow: 8.5 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength, Yield: 39.0 MPa
$ 2098/MT
- Solids Content: 48.5 %
- pH: 10.5
- Glass Transition Temp, Tg: 1.00 °C
$ 1629/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 7.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 107
- Tensile Strength, Ultimate: 34.5 MPa
$ 2591/MT
- Melt Flow: 25 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Yield: 60.0 MPa
- Elongation at Break: 120 %
- Elongation at Yield: 6.0 %
- Tensile Modulus: 2.30 GPa
$ 1722/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 2.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 29.0 MPa
- Tensile Strength, Yield: 38.6 MPa
$ 1831/MT
- Density: 1.20 g/cc
- Melt Density: 1.00 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0060 cm/cm
$ 1929/MT
- Solids Content: 53 %
- pH: 7.5
- Glass Transition Temp, Tg: 1.00 °C
$ 1727/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 6.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 31.0 MPa
- Tensile Strength, Yield: 37.9 MPa
$ 1767/MT
- Specific Gravity: 1.13 g/cc
- Water Absorption: 0.15 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 7.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 54.5 MPa
$ 1518/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1571/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 5.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 107
- Tensile Strength, Ultimate: 33.1 MPa
$ 1519/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 72.4 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1823/MT
- Density: 1.04 g/cc
- Density: 1.05 g/cc
- Apparent Bulk Density: 0.600 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
- Melt Flow: 2.5 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1900/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm
- Melt Flow: 8.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 122
- Tensile Strength at Break: 82.7 MPa
$ 1666/MT
- Density: 1.20 g/cc
- Water Absorption: 0.25 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1466/MT
- Specific Gravity: 1.136 g/cc
- Melt Flow: 21 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 11.8 MPa
- Tensile Strength, Yield: 16.3 MPa
- Elongation at Break: 33 %
$ 2203/MT
- Density: 1.20 g/cc
- Water Absorption: 0.25 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 2470/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 7.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 107
- Tensile Strength, Ultimate: 34.5 MPa
$ 1622/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1574/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 123
- Tensile Strength, Ultimate: 65.5 MPa
$ 1529/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength at Break: 66.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1740/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 3.9 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 108
- Tensile Strength, Yield: 30.3 MPa
$ 1593/MT
- Solids Content: 45.5 %
- pH: 9.5
- Glass Transition Temp, Tg: -30.0 °C
$ 1496/MT
- Density: 1.20 g/cc
- Water Absorption: 0.25 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 2060/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- Melt Flow: 3.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 34.5 MPa
- Tensile Strength, Yield: 44.1 MPa
$ 1518/MT
- Density: 1.04 g/cc
- Melt Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 3.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 44.8 MPa
$ 2405/MT
- Density: 1.12 g/cc
- Water Absorption: 0.20 - 0.60 %
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Melt Flow: 3.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 12 g/10 min @Load 5.00 kg, Temperature 250 °C
$ 1573/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength at Break: 71.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1558/MT
- Bulk Density: 0.650 g/cc
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 9.03 g/10 min
- Melt Flow: 8.5 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1590/MT
- Specific Gravity: 1.14 g/cc
- Water Absorption: 0.15 %
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 24 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 47.0 MPa
$ 2384/MT
- Specific Gravity: 1.20 g/cc
- Water Absorption: 0.15 %
- Water Absorption at Saturation: 0.32 %
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1498/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 2.2 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 105
- Tensile Strength, Yield: 41.4 MPa
$ 1624/MT
- Specific Gravity: 1.20 g/cc
- Water Absorption: 0.15 %
- Water Absorption at Saturation: 0.32 %
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1790/MT
- Density: 1.00 g/cc
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 20.0 MPa
- Elongation at Yield: 6.0 %
- Flexural Modulus: 1.21 GPa
$ 1923/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1661/MT
- Solids Content: 50 %
- pH: 8.5
- Glass Transition Temp, Tg: -9.00 °C
$ 1477/MT
- Solids Content: 49 %
- pH: 6.0
- Glass Transition Temp, Tg: -54.0 °C
$ 1900/MT
- Specific Gravity: 1.27 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0020 - 0.0050 cm/cm
- Melt Flow: 13 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 122
$ 1502/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 22 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 118
- Tensile Strength, Ultimate: 65.5 MPa
$ 1965/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 22 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1493/MT
- Density: 1.27 g/cc
- Linear Mold Shrinkage, Transverse: 0.0020 - 0.0050 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 57.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1771/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1482/MT
- Density: 1.18 g/cc
- Melt Flow: 18 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength at Break: 65.3 MPa @Thickness 3.20 mm
- Tensile Strength, Yield: 64.8 MPa @Thickness 3.20 mm
- Elongation at Break: 49 % @Thickness 3.20 mm
$ 1677/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1584/MT
- Specific Gravity: 1.20 g/cc
- Water Absorption: 0.15 %
- Water Absorption at Saturation: 0.32 %
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1580/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell M: 59
$ 1606/MT
- Density: 1.05 g/cc
- Apparent Bulk Density: 0.650 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
- Melt Flow: 8.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 28 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1760/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 2.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 35.2 MPa
- Tensile Strength, Yield: 43.4 MPa
$ 1943/MT
- Density: 1.12 g/cc
- Tensile Strength at Break: 105 MPa
- Elongation at Break: 2.3 %
- Elongation at Break: 3.0 %
- Tensile Modulus: 6.50 GPa
$ 1577/MT
- Density: 1.09 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 12 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 80.0 MPa
- Tensile Strength, Yield: 43.0 MPa
$ 1620/MT
- Solids Content: 46 %
- pH: 8.0
- Glass Transition Temp, Tg: -17.0 °C
$ 1731/MT
- Bulk Density: 0.665 g/cc
- Density: 1.17 g/cc
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm
- Melt Flow: 22 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1539/MT
- Density: 1.22 g/cc
- Melt Density: 0.962 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0025 cm/cm
$ 1814/MT
- Specific Gravity: 1.20 g/cc
- Water Absorption: 0.15 %
- Water Absorption at Saturation: 0.32 %
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 22 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1654/MT
- Density: 1.04 g/cc
- Maximum Moisture Content: 0.10
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
- Melt Flow: 12 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 41.4 MPa
$ 1917/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 5.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 107
- Tensile Strength, Ultimate: 31.0 MPa
$ 1595/MT
- Density: 1.27 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.25 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1526/MT
- Solids Content: 52 %
- pH: 8.0
- Glass Transition Temp, Tg: 105 °C
$ 1445/MT
- Solids Content: 50 %
- pH: 5.5
- Glass Transition Temp, Tg: 8.00 °C
$ 1577/MT
- Density: 1.04 g/cc
- Maximum Moisture Content: 0.10
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 41.4 MPa @Thickness 3.20 mm
$ 1447/MT
- Specific Gravity: 1.20 g/cc
- Melt Flow: 80 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell M: 58
- Hardness, Rockwell R: 124
- Tensile Strength, Ultimate: 48.3 MPa
$ 2074/MT
- Density: 0.900 g/cc
- Melt Flow: 35 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 34.0 MPa @Thickness 3.20 mm
- Elongation at Yield: 7.0 % @Thickness 3.20 mm
- Flexural Modulus: 1.42 GPa
- Izod Impact, Notched: 0.270 J/cm @Thickness 3.20 mm, Temperature 23.0 °C
$ 2447/MT
- Solids Content: 50 %
- pH: 8.0
- Glass Transition Temp, Tg: 46.0 °C
$ 2463/MT
- Specific Gravity: 1.36 g/cc
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Melt Flow: 8.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 122
- Tensile Strength, Ultimate: 82.7 MPa
$ 1491/MT
- Density: 1.20 g/cc
- Water Absorption: 0.25 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min
$ 2009/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
- Melt Flow: 11 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Yield: 55.8 MPa
- Tensile Strength, Yield: 56.0 MPa
$ 1678/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength at Break: 66.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1675/MT
- Density: 1.05 g/cc
- Melt Flow: 1.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 1.7 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength at Break: 60.0 MPa
- Tensile Strength, Yield: 33.6 MPa
$ 1688/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 20 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 123
- Tensile Strength at Break: 58.0 MPa @Thickness 4.00 mm
$ 1548/MT
- Density: 1.24 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Yield: 45.0 MPa
- Elongation at Break: 6.0 %
$ 1530/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 1.2 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Ultimate: 28.3 MPa
- Tensile Strength, Yield: 39.3 MPa
$ 1567/MT
- Density: 1.17 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 11 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 120 @Thickness 3.20 mm
- Tensile Strength at Break: 48.3 MPa @Thickness 3.20 mm
$ 1509/MT
- Density: 1.04 g/cc
- Melt Density: 0.890 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 6.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 104
$ 2085/MT
- Specific Gravity: 1.37 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 79.3 MPa
$ 1456/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.32 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 22 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1639/MT
- Specific Gravity: 1.20 g/cc
- Water Absorption: 0.15 %
- Water Absorption at Saturation: 0.32 %
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1454/MT
- Density: 1.27 g/cc
- Linear Mold Shrinkage, Transverse: 0.0020 - 0.0050 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Ultimate: 57.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1721/MT
- Solids Content: 50 %
- pH: 5.0
- Glass Transition Temp, Tg: -8.00 °C
$ 1644/MT
- Specific Gravity: 1.20 g/cc
- Water Absorption: 0.15 %
- Water Absorption at Saturation: 0.32 %
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 22 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1838/MT
- Solids Content: 50 %
- pH: 7.5
- Glass Transition Temp, Tg: -20.0 °C
$ 1494/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1658/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 2182/MT
- Solids Content: 47 %
- pH: 5.5
- Glass Transition Temp, Tg: 97.0 °C
$ 2290/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 118
- Tensile Strength, Ultimate: 71.0 MPa
$ 1483/MT
- Solids Content: 48.5 %
- pH: 11
- Glass Transition Temp, Tg: -17.0 °C
$ 1696/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 22 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength at Break: 46.9 MPa
- Tensile Strength, Yield: 64.1 MPa
$ 1910/MT
- Specific Gravity: 1.27 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0020 - 0.0050 cm/cm
- Melt Flow: 13 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 122
$ 2414/MT
- Solids Content: 50 %
- pH: 6.5
- Glass Transition Temp, Tg: -25.0 °C
$ 1570/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 7.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 107
- Tensile Strength, Ultimate: 35.9 MPa
$ 2094/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Melt Flow: 12 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 75.0 MPa
- Tensile Modulus: 4.00 GPa
$ 1490/MT
- Density: 1.20 g/cc
- Water Absorption: 0.32 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 22 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1813/MT
- Density: 1.11 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 4.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 25 g/10 min @Load 5.00 kg, Temperature 260 °C
- Hardness, Rockwell R: 112 @Thickness 3.20 mm
$ 1590/MT
- Density: 1.27 g/cc
- Water Absorption: 0.25 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm
- Melt Flow: 8.0 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1942/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell M: 59
$ 1776/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 19 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 123
- Tensile Strength, Ultimate: 58.6 MPa
$ 1648/MT
- Density: 1.13 g/cc
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Melt Flow: 4.5 g/10 min @Load 3.80 kg, Temperature 230 °C
Delivery Thermoplastic Styron
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):| Country | 20’ Container | 40’ Container | 5,000 MT |
|---|---|---|---|
| 🇦🇺 Australia | $3345 | $4181 | $401400 |
| 🇦🇹 Austria | $2825 | $3531 | $339000 |
| 🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
| 🇦🇱 Albania | $2500 | $3125 | $300000 |
| 🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
| 🇦🇴 Angola | $2762.5 | $3453 | $331500 |
| 🇦🇷 Argentina | $3230 | $4038 | $387600 |
| 🇦🇲 Armenia | $2625 | $3281 | $315000 |
| 🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
| 🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
| 🇧🇭 Bahrain | $3095 | $3869 | $371400 |
| 🇧🇾 Belarus | $2825 | $3531 | $339000 |
| 🇧🇿 Belize | $3155 | $3944 | $378600 |
| 🇧🇪 Belgium | $2575 | $3219 | $309000 |
| 🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
| 🇧🇴 Bolivia | $3230 | $4038 | $387600 |
| 🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
| 🇧🇷 Brazil | $3120 | $3900 | $374400 |
| 🇭🇺 Hungary | $2575 | $3219 | $309000 |
| 🇻🇪 Venezuela | $3230 | $4038 | $387600 |
| 🇻🇳 Vietnam | $2625 | $3281 | $315000 |
| 🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
| 🇬🇹 Guatemala | $3230 | $4038 | $387600 |
| 🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
| 🇩🇪 Germany | $2475 | $3094 | $297000 |
| 🇭🇳 Honduras | $3230 | $4038 | $387600 |
| 🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
| 🇬🇷 Greece | $2575 | $3219 | $309000 |
| 🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
| 🇩🇰 Denmark | $2400 | $3000 | $288000 |
| 🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
| 🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
| 🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
| 🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
| 🇮🇱 Israel | $2625 | $3281 | $315000 |
| 🇮🇳 India | $3712.5 | $4641 | $445500 |
| 🇮🇩 Indonesia | $3095 | $3869 | $371400 |
| 🇯🇴 Jordan | $2625 | $3281 | $315000 |
| 🇮🇶 Iraq | $2625 | $3281 | $315000 |
| 🇮🇷 Iran | $3095 | $3869 | $371400 |
| 🇮🇪 Ireland | $2500 | $3125 | $300000 |
| 🇮🇸 Iceland | $2575 | $3219 | $309000 |
| 🇪🇸 Spain | $2500 | $3125 | $300000 |
| 🇮🇹 Italy | $2400 | $3000 | $288000 |
| 🇾🇪 Yemen | $2625 | $3281 | $315000 |
| 🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
| 🇰🇭 Cambodia | $3095 | $3869 | $371400 |
| 🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
| 🇨🇦 Canada | $3230 | $4038 | $387600 |
| 🇶🇦 Qatar | $2625 | $3281 | $315000 |
| 🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
| 🇨🇾 Cyprus | $2625 | $3281 | $315000 |
| 🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
| 🇨🇳 China | $3712.5 | $4641 | $445500 |
| 🇨🇴 Colombia | $3230 | $4038 | $387600 |
| 🇰🇷 Korea South | $2625 | $3281 | $315000 |
| 🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
| 🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
| 🇨🇺 Cuba | $3230 | $4038 | $387600 |
| 🇰🇼 Kuwait | $2625 | $3281 | $315000 |
| 🇱🇻 Latvia | $2575 | $3219 | $309000 |
| 🇱🇧 Lebanon | $2625 | $3281 | $315000 |
| 🇱🇾 Libya | $2762.5 | $3453 | $331500 |
| 🇱🇹 Lithuania | $2500 | $3125 | $300000 |
| 🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
| 🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
| 🇲🇾 Malaysia | $2625 | $3281 | $315000 |
| 🇲🇹 Malta | $2500 | $3125 | $300000 |
| 🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
| 🇲🇽 Mexico | $3155 | $3944 | $378600 |
| 🇲🇩 Moldova | $2400 | $3000 | $288000 |
| 🇲🇨 Monaco | $2475 | $3094 | $297000 |
| 🇲🇳 Mongolia | $2625 | $3281 | $315000 |
| 🇲🇲 Myanmar | $2625 | $3281 | $315000 |
| 🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
| 🇳🇵 Nepal | $2625 | $3281 | $315000 |
| 🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
| 🇳🇱 Netherlands | $2575 | $3219 | $309000 |
| 🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
| 🇳🇿 New Zealand | $3345 | $4181 | $401400 |
| 🇳🇴 Norway | $2400 | $3000 | $288000 |
| 🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
| 🇴🇲 Oman | $2625 | $3281 | $315000 |
| 🇵🇰 Pakistan | $2625 | $3281 | $315000 |
| 🇵🇦 Panama | $3230 | $4038 | $387600 |
| 🇵🇾 Paraguay | $3155 | $3944 | $378600 |
| 🇵🇪 Peru | $3230 | $4038 | $387600 |
| 🇵🇱 Poland | $2575 | $3219 | $309000 |
| 🇵🇹 Portugal | $2500 | $3125 | $300000 |
| 🇷🇺 Russia | $2575 | $3219 | $309000 |
| 🇷🇴 Romania | $2475 | $3094 | $297000 |
| 🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
| 🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
| 🇷🇸 Serbia | $2575 | $3219 | $309000 |
| 🇸🇬 Singapore | $3095 | $3869 | $371400 |
| 🇸🇾 Syria | $3095 | $3869 | $371400 |
| 🇸🇰 Slovakia | $2500 | $3125 | $300000 |
| 🇸🇮 Slovenia | $2500 | $3125 | $300000 |
| 🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
| 🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
| 🇺🇸 United States | $2902.5 | $3628 | $348300 |
| 🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
| 🇹🇭 Thailand | $2625 | $3281 | $315000 |
| 🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
| 🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
| 🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
| 🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
| 🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
| 🇹🇷 Turkey | $2625 | $3281 | $315000 |
| 🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
| 🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
| 🇺🇦 Ukraine | $2500 | $3125 | $300000 |
| 🇺🇾 Uruguay | $2675 | $3344 | $321000 |
| 🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
| 🇵🇭 Philippines | $2625 | $3281 | $315000 |
| 🇫🇮 Finland | $2500 | $3125 | $300000 |
| 🇫🇷 France | $2575 | $3219 | $309000 |
| 🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
| 🇲🇪 Montenegro | $2575 | $3219 | $309000 |
| 🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
| 🇨🇱 Chile | $3355 | $4194 | $402600 |
| 🇨🇭 Switzerland | $2575 | $3219 | $309000 |
| 🇸🇪 Sweden | $2500 | $3125 | $300000 |
| 🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
| 🇪🇨 Ecuador | $3155 | $3944 | $378600 |
| 🇦🇸 American Samoa | $3345 | $4181 | $401400 |
| 🇸🇻 El Salvador | $3230 | $4038 | $387600 |
| 🇪🇪 Estonia | $2575 | $3219 | $309000 |
| 🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
| 🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
| 🇯🇵 Japan | $3095 | $3869 | $371400 |
| 🇦🇩 Andorra | $2500 | $3125 | $300000 |
| 🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
| 🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
| 🇧🇧 Barbados | $3230 | $4038 | $387600 |
| 🇧🇹 Bhutan | $3095 | $3869 | $371400 |
| 🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
| 🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
| 🇧🇳 Brunei | $2625 | $3281 | $315000 |
| 🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
| 🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
| 🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
| 🇹🇩 Chad | $2762.5 | $3453 | $331500 |
| 🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
| 🇧🇯 Benin | $2762.5 | $3453 | $331500 |
| 🇩🇲 Dominica | $3230 | $4038 | $387600 |
| 🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
| 🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
| 🇫🇯 Fiji | $3345 | $4181 | $401400 |
| 🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
| 🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
| 🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
| 🇰🇮 Kiribati | $3345 | $4181 | $401400 |
| 🇬🇩 Grenada | $3355 | $4194 | $402600 |
| 🇬🇺 Guam | $3345 | $4181 | $401400 |
| 🇬🇾 Guyana | $3230 | $4038 | $387600 |
| 🇭🇹 Haiti | $3120 | $3900 | $374400 |
| 🇯🇲 Jamaica | $3230 | $4038 | $387600 |
| 🇰🇵 Korea, North | $2625 | $3281 | $315000 |
| 🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
| 🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
| 🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
| 🇲🇻 Maldives | $2625 | $3281 | $315000 |
| 🇲🇱 Mali | $2762.5 | $3453 | $331500 |
| 🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
| 🇨🇼 Curaçao | $3230 | $4038 | $387600 |
| 🇦🇼 Aruba | $3120 | $3900 | $374400 |
| 🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
| 🇳🇪 Niger | $2762.5 | $3453 | $331500 |
| 🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
| 🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
| 🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
| 🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
| 🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
| 🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
| 🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
| 🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
| 🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
| 🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
| 🇸🇲 San Marino | $2500 | $3125 | $300000 |
| 🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
| 🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
| 🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
| 🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
| 🇸🇷 Suriname | $3230 | $4038 | $387600 |
| 🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
| 🇹🇬 Togo | $2762.5 | $3453 | $331500 |
| 🇹🇴 Tonga | $3345 | $4181 | $401400 |
| 🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
| 🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
| 🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, lng carrier for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.
