$ 1567/MT
- Specific Gravity: 1.25 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0090 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 65.7 MPa @Thickness 3.20 mm
- Elongation at Break: 4.0 % @Thickness 3.20 mm
$ 1485/MT
- Specific Gravity: 1.21 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0070 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 58.8 MPa @Thickness 3.20 mm
- Elongation at Break: >= 100 % @Thickness 3.20 mm
$ 1715/MT
- Specific Gravity: 1.52 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0040 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 93.2 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1707/MT
- Specific Gravity: 1.44 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0040 - 0.011 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 108 MPa @Thickness 3.20 mm
- Elongation at Break: 4.0 % @Thickness 3.20 mm
$ 1758/MT
- Density: 1.41 g/cc
- Water Absorption: 0.070 %
- Linear Mold Shrinkage: 0.0040 - 0.011 cm/cm
- Hardness, Rockwell R: 90
- Tensile Strength, Ultimate: 93.1 MPa @Thickness 3.17 mm
$ 1617/MT
- Specific Gravity: 1.50 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0090 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 108 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1520/MT
- Specific Gravity: 1.31 g/cc
- Water Absorption: 0.080 % @Temperature 23.0 °C, Time 86400 sec
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.018 - 0.021 cm/cm @Thickness 3.20 mm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 2268/MT
- Specific Gravity: 1.65 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
- Tensile Strength, Yield: 80.0 MPa
- Elongation at Break: 6.0 %
$ 1719/MT
- Specific Gravity: 1.21 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0080 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 58.8 MPa @Thickness 3.20 mm
- Elongation at Break: >= 100 % @Thickness 3.20 mm
$ 1783/MT
- Density: 1.31 g/cc
- Water Absorption: 0.080 %
- Linear Mold Shrinkage: 0.012 - 0.021 cm/cm
- Hardness, Rockwell R: 115
- Tensile Strength, Ultimate: 56.5 MPa @Thickness 3.17 mm
$ 2288/MT
- Specific Gravity: 1.35 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0090 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 93.2 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1697/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm
- Tensile Strength, Yield: 49.0 MPa
- Elongation at Break: 30 %
$ 2058/MT
- Specific Gravity: 1.62 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0030 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 125 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1721/MT
- Specific Gravity: 1.33 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0090 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 77.5 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1589/MT
- Specific Gravity: 1.72 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0090 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 157 MPa @Thickness 3.20 mm
- Elongation at Break: 2.0 % @Thickness 3.20 mm
$ 1717/MT
- Specific Gravity: 1.54 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0040 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 118 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1585/MT
- Specific Gravity: 1.31 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Linear Mold Shrinkage, Transverse: 0.021 cm/cm
- Tensile Strength, Yield: 54.0 MPa
- Elongation at Break: >= 200 %
$ 1855/MT
- Specific Gravity: 1.40 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0040 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 76.5 MPa @Thickness 3.20 mm
- Elongation at Break: 4.0 % @Thickness 3.20 mm
$ 2185/MT
- Specific Gravity: 1.21 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0080 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 55.9 MPa @Thickness 3.20 mm
- Elongation at Break: >= 100 % @Thickness 3.20 mm
$ 1674/MT
- Specific Gravity: 1.44 g/cc
- Linear Mold Shrinkage: 0.011 cm/cm
- Linear Mold Shrinkage, Transverse: 0.020 cm/cm
- Tensile Strength, Yield: 62.0 MPa
- Elongation at Break: 30 %
$ 1712/MT
- Specific Gravity: 1.21 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0080 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 53.0 MPa @Thickness 3.20 mm
- Elongation at Break: >= 90 % @Thickness 3.20 mm
$ 1693/MT
- Specific Gravity: 1.31 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Linear Mold Shrinkage, Transverse: 0.021 cm/cm
- Tensile Strength, Yield: 54.0 MPa
- Elongation at Break: >= 150 %
$ 1605/MT
- Specific Gravity: 1.05 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 47.1 MPa @Thickness 3.20 mm
- Elongation at Break: 13 % @Thickness 3.20 mm
$ 2064/MT
- Specific Gravity: 1.40 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0090 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 55.9 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1646/MT
- Density: 1.31 g/cc
- Water Absorption: 0.080 %
- Linear Mold Shrinkage: 0.012 - 0.021 cm/cm
- Hardness, Rockwell R: 115
- Tensile Strength, Ultimate: 56.5 MPa @Thickness 3.17 mm
$ 1958/MT
- Density: 1.31 g/cc
- Water Absorption: 0.080 %
- Linear Mold Shrinkage: 0.012 - 0.021 cm/cm
- Hardness, Rockwell R: 115
- Tensile Strength, Ultimate: 56.5 MPa @Thickness 3.17 mm
$ 1587/MT
- Density: 1.31 g/cc
- Water Absorption: 0.080 %
- Linear Mold Shrinkage: 0.012 - 0.021 cm/cm
- Hardness, Rockwell R: 115
- Tensile Strength, Ultimate: 56.5 MPa @Thickness 3.17 mm
$ 1695/MT
- Density: 1.31 g/cc
- Water Absorption: 0.080 %
- Linear Mold Shrinkage: 0.012 - 0.021 cm/cm
- Hardness, Rockwell R: 115
- Tensile Strength, Ultimate: 56.5 MPa @Thickness 3.17 mm
$ 2232/MT
- Density: 1.31 g/cc
- Water Absorption: 0.080 %
- Linear Mold Shrinkage: 0.012 - 0.021 cm/cm
- Hardness, Rockwell R: 115
- Tensile Strength, Ultimate: 56.5 MPa @Thickness 3.17 mm
$ 1836/MT
- Density: 1.31 g/cc
- Water Absorption: 0.080 %
- Linear Mold Shrinkage: 0.012 - 0.021 cm/cm
- Hardness, Rockwell R: 115
- Tensile Strength, Ultimate: 56.5 MPa @Thickness 3.17 mm
$ 1731/MT
- Specific Gravity: 1.22 g/cc
- Water Absorption: 0.080 % @Temperature 23.0 °C, Time 86400 sec
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0070 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 55.9 MPa @Thickness 3.20 mm
$ 1574/MT
- Specific Gravity: 1.52 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 57.9 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1795/MT
- Specific Gravity: 1.52 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0050 - 0.012 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 52.0 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1830/MT
- Specific Gravity: 1.22 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0070 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 59.8 MPa @Thickness 3.20 mm
- Elongation at Break: >= 100 % @Thickness 3.20 mm
$ 1551/MT
- Specific Gravity: 1.30 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.012 - 0.020 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 52.0 MPa @Thickness 3.20 mm
- Elongation at Break: >= 100 % @Thickness 3.20 mm
$ 1632/MT
- Specific Gravity: 1.22 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0070 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 59.8 MPa @Thickness 3.20 mm
- Elongation at Break: >= 100 % @Thickness 3.20 mm
$ 1962/MT
- Density: 1.51 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.0030 - 0.0090 cm/cm
- Hardness, Rockwell R: 91
- Tensile Strength, Yield: 117 MPa
$ 2397/MT
- Specific Gravity: 1.31 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.020 - 0.021 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 57.9 MPa @Thickness 3.20 mm
- Elongation at Break: 100 % @Thickness 3.20 mm
$ 1460/MT
- Specific Gravity: 1.30 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.018 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 58.8 MPa @Thickness 3.20 mm
- Elongation at Break: 50 % @Thickness 3.20 mm
$ 2538/MT
- Specific Gravity: 1.30 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.018 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 58.8 MPa @Thickness 3.20 mm
- Elongation at Break: 40 % @Thickness 3.20 mm
$ 1787/MT
- Specific Gravity: 1.28 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.012 - 0.020 cm/cm @Thickness 3.20 mm
- Melt Flow: 45 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength, Yield: 47.1 MPa @Thickness 3.20 mm
$ 1826/MT
- Specific Gravity: 1.28 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.012 - 0.020 cm/cm @Thickness 3.20 mm
- Melt Flow: 35 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength, Yield: 46.1 MPa @Thickness 3.20 mm
$ 1602/MT
- Specific Gravity: 1.30 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.012 - 0.020 cm/cm @Thickness 3.20 mm
- Melt Flow: 30 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength, Yield: 58.8 MPa @Thickness 3.20 mm
$ 1482/MT
- Specific Gravity: 1.30 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.012 - 0.020 cm/cm @Thickness 3.20 mm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength, Yield: 50.0 MPa @Thickness 3.20 mm
$ 1461/MT
- Specific Gravity: 1.42 g/cc
- Linear Mold Shrinkage: 0.011 cm/cm
- Linear Mold Shrinkage, Transverse: 0.020 cm/cm
- Tensile Strength, Yield: 61.0 MPa
- Elongation at Break: 20 %
$ 2099/MT
- Specific Gravity: 1.42 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.012 - 0.020 cm/cm @Thickness 3.20 mm
- Hardness, Rockwell R: 118
- Tensile Strength, Yield: 51.0 MPa @Thickness 3.20 mm
$ 1974/MT
- Specific Gravity: 1.31 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Linear Mold Shrinkage, Transverse: 0.021 cm/cm
- Tensile Strength, Yield: 54.0 MPa
- Elongation at Break: 60 %
$ 1574/MT
- Specific Gravity: 1.47 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0050 - 0.012 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 58.8 MPa @Thickness 3.20 mm
- Elongation at Break: 4.0 % @Thickness 3.20 mm
$ 1614/MT
- Specific Gravity: 1.37 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0060 - 0.012 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 78.5 MPa @Thickness 3.20 mm
- Elongation at Break: 4.0 % @Thickness 3.20 mm
$ 1459/MT
- Specific Gravity: 1.52 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0040 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 118 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1965/MT
- Specific Gravity: 1.53 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0040 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 123 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1983/MT
- Specific Gravity: 1.62 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0030 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 123 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1880/MT
- Specific Gravity: 1.62 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0030 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 127 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1695/MT
- Specific Gravity: 1.62 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0030 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 118 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1473/MT
- Specific Gravity: 1.62 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0030 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 127 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1791/MT
- Specific Gravity: 1.61 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0040 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 127 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1599/MT
- Specific Gravity: 1.37 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0070 - 0.011 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 74.5 MPa @Thickness 3.20 mm
- Elongation at Break: 5.0 % @Thickness 3.20 mm
$ 1867/MT
- Specific Gravity: 1.39 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0070 - 0.011 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 83.4 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1601/MT
- Specific Gravity: 1.44 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
- Tensile Strength, Yield: 100 MPa
- Elongation at Break: 4.5 %
$ 1447/MT
- Specific Gravity: 1.30 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.012 - 0.020 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 50.0 MPa @Thickness 3.20 mm
- Elongation at Break: >= 100 % @Thickness 3.20 mm
$ 1624/MT
- Specific Gravity: 1.31 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Linear Mold Shrinkage, Transverse: 0.021 cm/cm
- Tensile Strength, Yield: 54.0 MPa
- Elongation at Break: >= 100 %
$ 2032/MT
- Specific Gravity: 1.40 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 53.9 MPa @Thickness 3.20 mm
- Elongation at Break: 40 % @Thickness 3.20 mm
$ 2186/MT
- Specific Gravity: 1.60 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Tensile Strength, Yield: 95.0 MPa
- Elongation at Break: 7.0 %
$ 1660/MT
- Specific Gravity: 1.57 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0030 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 98.1 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1501/MT
- Density: 1.52 g/cc
- Water Absorption: 0.070 %
- Linear Mold Shrinkage: 0.0040 - 0.011 cm/cm
- Hardness, Rockwell R: 90
- Tensile Strength, Ultimate: 97.9 MPa @Thickness 3.17 mm
$ 2363/MT
- Density: 1.62 g/cc
- Water Absorption: 0.060 %
- Hardness, Rockwell R: 92
- Tensile Strength, Ultimate: 132.4 MPa @Thickness 3.17 mm
- Tensile Strength, Yield: 128 MPa
$ 1462/MT
- Density: 1.34 g/cc
- Tensile Strength, Ultimate: 124.1 MPa @Thickness 3.17 mm
- Tensile Strength, Yield: 70.3 MPa
- Elongation at Break: 7.0 %
- Flexural Yield Strength: 70.3 MPa
$ 1450/MT
- Density: 1.34 g/cc
- Linear Mold Shrinkage: 0.0080 - 0.013 cm/cm @Thickness 1.00 - 2.50 mm
- Linear Mold Shrinkage: 0.010 - 0.015 cm/cm @Thickness 2.50 - 5.00 mm
- Tensile Strength at Break: 50.3 MPa
- Elongation at Break: 25 % @Thickness 3.17 mm
$ 1998/MT
- Density: 1.34 g/cc
- Tensile Strength, Yield: 50.3 MPa
- Elongation at Break: 30 %
- Flexural Yield Strength: 78.1 MPa @Thickness 3.17 mm
- Flexural Modulus: 1.93 GPa @Thickness 3.17 mm
$ 1483/MT
- Density: 1.55 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.0030 - 0.0090 cm/cm
- Hardness, Rockwell R: 91
- Tensile Strength, Yield: 117 MPa
$ 1918/MT
- Specific Gravity: 1.45 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0070 - 0.015 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 53.0 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1629/MT
- Specific Gravity: 1.54 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0050 - 0.012 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 53.9 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1541/MT
- Specific Gravity: 1.54 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0050 - 0.012 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 44.1 MPa @Thickness 3.20 mm
- Elongation at Break: 3.5 % @Thickness 3.20 mm
$ 1679/MT
- Specific Gravity: 1.43 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0040 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 93.2 MPa @Thickness 3.20 mm
- Elongation at Break: 4.0 % @Thickness 3.20 mm
$ 1809/MT
- Specific Gravity: 1.53 g/cc
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Tensile Strength, Yield: 110 MPa
- Elongation at Break: 4.0 %
$ 2165/MT
- Specific Gravity: 1.21 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0070 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 59.8 MPa @Thickness 3.20 mm
- Elongation at Break: >= 100 % @Thickness 3.20 mm
$ 1925/MT
- Specific Gravity: 1.52 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0040 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 95.1 MPa @Thickness 3.20 mm
- Elongation at Break: 4.0 % @Thickness 3.20 mm
$ 1580/MT
- Specific Gravity: 1.45 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0040 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 98.1 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1684/MT
- Specific Gravity: 1.28 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.013 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 56.9 MPa @Thickness 3.20 mm
- Elongation at Break: >= 50 % @Thickness 3.20 mm
$ 1944/MT
- Specific Gravity: 1.66 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0030 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 108 MPa @Thickness 3.20 mm
- Elongation at Break: >= 4.0 % @Thickness 3.20 mm
$ 1643/MT
- Specific Gravity: 1.13 g/cc
- Linear Mold Shrinkage: 0.0070 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
- Tensile Strength, Yield: 44.0 MPa
- Elongation at Break: >= 100 %
$ 1644/MT
- Specific Gravity: 1.31 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0060 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 58.8 MPa @Thickness 3.20 mm
- Elongation at Break: >= 100 % @Thickness 3.20 mm
$ 1575/MT
- Specific Gravity: 1.50 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm
- Tensile Strength, Yield: 110 MPa
- Elongation at Break: 4.0 %
$ 1915/MT
- Specific Gravity: 1.52 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
- Tensile Strength, Yield: 125 MPa
- Elongation at Break: 3.0 %
$ 2447/MT
- Specific Gravity: 1.21 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0080 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 58.8 MPa @Thickness 3.20 mm
- Elongation at Break: >= 100 % @Thickness 3.20 mm
$ 1661/MT
- Specific Gravity: 1.52 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0040 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 98.1 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 1553/MT
- Specific Gravity: 1.21 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0080 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 55.9 MPa @Thickness 3.20 mm
- Elongation at Break: >= 100 % @Thickness 3.20 mm
$ 1895/MT
- Specific Gravity: 1.19 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Tensile Strength, Yield: 34.0 MPa
- Elongation at Break: 30 %
$ 1952/MT
- Specific Gravity: 1.29 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0070 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 81.4 MPa @Thickness 3.20 mm
- Elongation at Break: >= 6.0 % @Thickness 3.20 mm
$ 1698/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage: 0.0070 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Break: >= 100 %
$ 1499/MT
- Specific Gravity: 1.44 g/cc
- Maximum Moisture Content: 0.020
- Linear Mold Shrinkage, Flow: 0.0030 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 93.2 MPa @Thickness 3.20 mm
- Elongation at Break: 3.0 % @Thickness 3.20 mm
$ 2184/MT
- Specific Gravity: 1.40 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Tensile Strength, Yield: 59.0 MPa
- Elongation at Break: 4.0 %
Delivery Polybutylene Terephthalate (PBT) LG Chemical
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):
Country | 20’ Container | 40’ Container | 5,000 MT |
🇦🇺 Australia | $3345 | $4181 | $401400 |
🇦🇹 Austria | $2825 | $3531 | $339000 |
🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
🇦🇱 Albania | $2500 | $3125 | $300000 |
🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
🇦🇴 Angola | $2762.5 | $3453 | $331500 |
🇦🇷 Argentina | $3230 | $4038 | $387600 |
🇦🇲 Armenia | $2625 | $3281 | $315000 |
🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
🇧🇭 Bahrain | $3095 | $3869 | $371400 |
🇧🇾 Belarus | $2825 | $3531 | $339000 |
🇧🇿 Belize | $3155 | $3944 | $378600 |
🇧🇪 Belgium | $2575 | $3219 | $309000 |
🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
🇧🇴 Bolivia | $3230 | $4038 | $387600 |
🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
🇧🇷 Brazil | $3120 | $3900 | $374400 |
🇭🇺 Hungary | $2575 | $3219 | $309000 |
🇻🇪 Venezuela | $3230 | $4038 | $387600 |
🇻🇳 Vietnam | $2625 | $3281 | $315000 |
🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
🇬🇹 Guatemala | $3230 | $4038 | $387600 |
🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
🇩🇪 Germany | $2475 | $3094 | $297000 |
🇭🇳 Honduras | $3230 | $4038 | $387600 |
🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
🇬🇷 Greece | $2575 | $3219 | $309000 |
🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
🇩🇰 Denmark | $2400 | $3000 | $288000 |
🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
🇮🇱 Israel | $2625 | $3281 | $315000 |
🇮🇳 India | $3712.5 | $4641 | $445500 |
🇮🇩 Indonesia | $3095 | $3869 | $371400 |
🇯🇴 Jordan | $2625 | $3281 | $315000 |
🇮🇶 Iraq | $2625 | $3281 | $315000 |
🇮🇷 Iran | $3095 | $3869 | $371400 |
🇮🇪 Ireland | $2500 | $3125 | $300000 |
🇮🇸 Iceland | $2575 | $3219 | $309000 |
🇪🇸 Spain | $2500 | $3125 | $300000 |
🇮🇹 Italy | $2400 | $3000 | $288000 |
🇾🇪 Yemen | $2625 | $3281 | $315000 |
🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
🇰🇭 Cambodia | $3095 | $3869 | $371400 |
🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
🇨🇦 Canada | $3230 | $4038 | $387600 |
🇶🇦 Qatar | $2625 | $3281 | $315000 |
🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
🇨🇾 Cyprus | $2625 | $3281 | $315000 |
🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
🇨🇳 China | $3712.5 | $4641 | $445500 |
🇨🇴 Colombia | $3230 | $4038 | $387600 |
🇰🇷 Korea South | $2625 | $3281 | $315000 |
🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
🇨🇺 Cuba | $3230 | $4038 | $387600 |
🇰🇼 Kuwait | $2625 | $3281 | $315000 |
🇱🇻 Latvia | $2575 | $3219 | $309000 |
🇱🇧 Lebanon | $2625 | $3281 | $315000 |
🇱🇾 Libya | $2762.5 | $3453 | $331500 |
🇱🇹 Lithuania | $2500 | $3125 | $300000 |
🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
🇲🇾 Malaysia | $2625 | $3281 | $315000 |
🇲🇹 Malta | $2500 | $3125 | $300000 |
🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
🇲🇽 Mexico | $3155 | $3944 | $378600 |
🇲🇩 Moldova | $2400 | $3000 | $288000 |
🇲🇨 Monaco | $2475 | $3094 | $297000 |
🇲🇳 Mongolia | $2625 | $3281 | $315000 |
🇲🇲 Myanmar | $2625 | $3281 | $315000 |
🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
🇳🇵 Nepal | $2625 | $3281 | $315000 |
🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
🇳🇱 Netherlands | $2575 | $3219 | $309000 |
🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
🇳🇿 New Zealand | $3345 | $4181 | $401400 |
🇳🇴 Norway | $2400 | $3000 | $288000 |
🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
🇴🇲 Oman | $2625 | $3281 | $315000 |
🇵🇰 Pakistan | $2625 | $3281 | $315000 |
🇵🇦 Panama | $3230 | $4038 | $387600 |
🇵🇾 Paraguay | $3155 | $3944 | $378600 |
🇵🇪 Peru | $3230 | $4038 | $387600 |
🇵🇱 Poland | $2575 | $3219 | $309000 |
🇵🇹 Portugal | $2500 | $3125 | $300000 |
🇷🇺 Russia | $2575 | $3219 | $309000 |
🇷🇴 Romania | $2475 | $3094 | $297000 |
🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
🇷🇸 Serbia | $2575 | $3219 | $309000 |
🇸🇬 Singapore | $3095 | $3869 | $371400 |
🇸🇾 Syria | $3095 | $3869 | $371400 |
🇸🇰 Slovakia | $2500 | $3125 | $300000 |
🇸🇮 Slovenia | $2500 | $3125 | $300000 |
🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
🇺🇸 United States | $2902.5 | $3628 | $348300 |
🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
🇹🇭 Thailand | $2625 | $3281 | $315000 |
🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
🇹🇷 Turkey | $2625 | $3281 | $315000 |
🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
🇺🇦 Ukraine | $2500 | $3125 | $300000 |
🇺🇾 Uruguay | $2675 | $3344 | $321000 |
🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
🇵🇭 Philippines | $2625 | $3281 | $315000 |
🇫🇮 Finland | $2500 | $3125 | $300000 |
🇫🇷 France | $2575 | $3219 | $309000 |
🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
🇲🇪 Montenegro | $2575 | $3219 | $309000 |
🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
🇨🇱 Chile | $3355 | $4194 | $402600 |
🇨🇭 Switzerland | $2575 | $3219 | $309000 |
🇸🇪 Sweden | $2500 | $3125 | $300000 |
🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
🇪🇨 Ecuador | $3155 | $3944 | $378600 |
🇦🇸 American Samoa | $3345 | $4181 | $401400 |
🇸🇻 El Salvador | $3230 | $4038 | $387600 |
🇪🇪 Estonia | $2575 | $3219 | $309000 |
🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
🇯🇵 Japan | $3095 | $3869 | $371400 |
🇦🇩 Andorra | $2500 | $3125 | $300000 |
🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
🇧🇧 Barbados | $3230 | $4038 | $387600 |
🇧🇹 Bhutan | $3095 | $3869 | $371400 |
🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
🇧🇳 Brunei | $2625 | $3281 | $315000 |
🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
🇹🇩 Chad | $2762.5 | $3453 | $331500 |
🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
🇧🇯 Benin | $2762.5 | $3453 | $331500 |
🇩🇲 Dominica | $3230 | $4038 | $387600 |
🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
🇫🇯 Fiji | $3345 | $4181 | $401400 |
🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
🇰🇮 Kiribati | $3345 | $4181 | $401400 |
🇬🇩 Grenada | $3355 | $4194 | $402600 |
🇬🇺 Guam | $3345 | $4181 | $401400 |
🇬🇾 Guyana | $3230 | $4038 | $387600 |
🇭🇹 Haiti | $3120 | $3900 | $374400 |
🇯🇲 Jamaica | $3230 | $4038 | $387600 |
🇰🇵 Korea, North | $2625 | $3281 | $315000 |
🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
🇲🇻 Maldives | $2625 | $3281 | $315000 |
🇲🇱 Mali | $2762.5 | $3453 | $331500 |
🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
🇨🇼 Curaçao | $3230 | $4038 | $387600 |
🇦🇼 Aruba | $3120 | $3900 | $374400 |
🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
🇳🇪 Niger | $2762.5 | $3453 | $331500 |
🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
🇸🇲 San Marino | $2500 | $3125 | $300000 |
🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
🇸🇷 Suriname | $3230 | $4038 | $387600 |
🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
🇹🇬 Togo | $2762.5 | $3453 | $331500 |
🇹🇴 Tonga | $3345 | $4181 | $401400 |
🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts,
vessels for sale turkey. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.