$ 2110/MT
- Bulk Density: 0.0260 - 0.0300 g/cc
- Density: 0.0400 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 4000 µm
$ 1792/MT
- Bulk Density: 0.0730 - 0.0870 g/cc
- Density: 0.0800 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 3000 µm
$ 1461/MT
- Bulk Density: 0.0730 - 0.0870 g/cc
- Density: 0.100 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 3000 µm
$ 1604/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0400 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1485/MT
- Density: 0.0100 - 0.100 g/cc @Pressure 0.101 MPa, Temperature 20.0 °C
- Decomposition Temperature: >= 140 °C
- Flash Point: >= 200 °C
- Melt Temperature: 100 - 140 °C
- Commercial Status: Europe
- Ignition Temperature: >360°C
$ 1771/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Tensile Strength, Ultimate: 65.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 3.80 GPa
$ 1673/MT
- Density: 1.22 g/cc
- Hardness, Shore A: 96
- Hardness, Shore D: 48
- Tensile Strength: 40.0 MPa
- Tensile Strength: 55.0 MPa
$ 1469/MT
- Density: 1.34 g/cc
- Water Absorption: 0.90 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.019 cm/cm
- Linear Mold Shrinkage, Transverse: 0.019 cm/cm
$ 1675/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.36 g/cc
- Water Absorption: 5.9 - 6.5 %
- Moisture Absorption at Equilibrium: 2.2 - 2.6 %
- Viscosity Measurement: 145
$ 2276/MT
- Density: 0.932 g/cc
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.7 %
$ 1846/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 9.3 %
- Moisture Absorption at Equilibrium: 2.6 %
- Relative Viscosity: 2.6 cP
$ 1903/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 9.3 %
- Moisture Absorption at Equilibrium: 2.6 %
- Relative Viscosity: 2.6 cP
$ 1554/MT
- Density: 1.56 g/cc
- Moisture Absorption at Equilibrium: 1.4 %
- Moisture Absorption at Equilibrium: 4.8 %
- Tensile Strength at Break: 145 MPa
- Elongation at Break: 6.0 %
$ 1456/MT
- Density: 1.136 g/cc
- Density: 1.39 g/cc
- Water Absorption: 1.1 %
- Water Absorption: 6.4 %
- Moisture Absorption at Equilibrium: 1.8 %
$ 1471/MT
- Density: 1.48 g/cc
- Moisture Absorption at Equilibrium: 0.90 %
- Moisture Absorption at Equilibrium: 1.6 %
- Moisture Absorption at Equilibrium: 5.7 %
- Melt Flow: 39.42 g/10 min
$ 1968/MT
- Density: 1.00 g/cc
- Linear Mold Shrinkage, Flow: 0.0085 cm/cm
- Tensile Strength, Yield: 17.0 MPa
- Elongation at Break: >= 50 %
- Tensile Modulus: 1.40 GPa
$ 1696/MT
- Bulk Density: 0.700 - 0.800 g/cc
- Density: 1.37 g/cc
- Water Absorption: 2.2 %
- Moisture Absorption at Equilibrium: 0.80 %
- Viscosity Measurement: 56
$ 1897/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 0.400 - 0.700 mm
- Softening Point: 70.0 °C
$ 2108/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Relative Viscosity: 4.0 cP
- Viscosity Test: 250 cm³/g
$ 1817/MT
- Density: 1.16 g/cc
- Water Absorption: 6.5 - 7.5 %
- Moisture Absorption at Equilibrium: 1.6 - 2.0 %
- Viscosity Measurement: 130
- Linear Mold Shrinkage: 0.0060 cm/cm
$ 1737/MT
- Density: 1.06 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- High Load Melt Index: 45 g/10 min @Load 21.6 kg, Temperature 250 °C
$ 1545/MT
- Density: 1.354 g/cc
- Water Absorption: 1.8 - 2.4 %
- Moisture Absorption at Equilibrium: 0.70 - 1.1 %
- Viscosity Measurement: 150
- Linear Mold Shrinkage: 0.0040 cm/cm
$ 2033/MT
- Density: 1.53 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 102 cm³/g
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
$ 2380/MT
- Density: 1.14 g/cc
- Hardness, Shore A: 76
- Tensile Strength, Ultimate: 30.0 MPa
- Tensile Strength, Yield: 4.30 MPa @Strain 100 %
- Tensile Strength, Yield: 8.30 MPa @Strain 300 %
$ 1911/MT
- Density: 1.48 g/cc
- Moisture Absorption at Equilibrium: 1.7 %
- Moisture Absorption at Equilibrium: 5.7 %
- Melt Temperature: 270 - 295 °C
- Mold Temperature: 80.0 - 95.0 °C
$ 2422/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.7 %
- Relative Viscosity: 2.81 - 3.0 cP
- Viscosity Test: 165 cm³/g
$ 2228/MT
- Density: 1.40 g/cc
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.7 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength at Break: 193 MPa
$ 1630/MT
- Density: 1.48 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 92
- Linear Mold Shrinkage, Flow: 0.0027 cm/cm
$ 1703/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 31 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1515/MT
- Relative Viscosity: 5.0 cP
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melting Point: 220 °C
$ 1446/MT
- Density: 1.50 g/cc
- Tensile Strength at Break: 135 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 10.8 GPa
- Flexural Modulus: 9.80 GPa
$ 1746/MT
- Density: 1.25 g/cc
- Hardness, Shore A: 94
- Hardness, Shore D: 41
- Tensile Strength: 50.0 MPa
- Elongation at Break: 600 %
$ 1705/MT
- Bulk Density: 0.0160 - 0.0350 g/cc
- Density: 0.0300 g/cc
- Tensile Stress: 0.125 MPa
- Tensile Stress: 0.195 MPa
- Tensile Stress: 0.250 MPa
$ 1462/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.38 g/cc
- Water Absorption: 5.0 - 6.0 %
- Moisture Absorption at Equilibrium: 1.1 - 1.5 %
- Viscosity Measurement: 130
$ 1733/MT
- Density: 1.53 g/cc
- Water Absorption: 0.20 %
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 102 cm³/g
$ 2095/MT
- Density: 1.53 g/cc
- Moisture Absorption at Equilibrium: 0.12 %
- Viscosity Test: 105 cm³/g
- Tensile Strength, Ultimate: 130 MPa
- Elongation at Break: 3.0 %
$ 1638/MT
- Density: 1.21 g/cc
- Hardness, Shore A: 90
- Tensile Strength: 40.0 MPa
- Tensile Strength: 50.0 MPa
- Tensile Strength: 4.00 MPa @Strain 20.0 %
$ 1503/MT
- Density: 1.291 g/cc
- Density: 1.49 g/cc
- Water Absorption: 1.1 %
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.6 %
$ 1623/MT
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 7.5 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 145 MPa
$ 1907/MT
- Bulk Density: 0.850 g/cc
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.021 cm/cm
$ 1639/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.32 g/cc
- Water Absorption: 4.7 - 5.3 %
- Moisture Absorption at Equilibrium: 1.0 - 1.4 %
- Viscosity Measurement: 140
$ 1606/MT
- Density: 1.23 g/cc
- Water Absorption: 7.7 - 8.3 %
- Moisture Absorption at Equilibrium: 2.3 - 2.9 %
- Viscosity Measurement: 140
- Linear Mold Shrinkage: 0.0045 cm/cm
$ 1817/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Relative Viscosity: 5.0 cP
- Viscosity Test: 320 cm³/g
$ 1963/MT
- Density: 1.29 g/cc
- Water Absorption: 1.3 %
- Water Absorption: 7.9 %
- Moisture Absorption at Equilibrium: 2.2 %
- Linear Mold Shrinkage: 0.0080 cm/cm
$ 2241/MT
- Density: 1.23 g/cc
- Water Absorption: 2.6 %
- Water Absorption: 8.0 %
- Moisture Absorption at Equilibrium: 2.6 %
- Linear Mold Shrinkage: 0.0050 cm/cm
$ 1902/MT
- Density: 1.40 g/cc
- Moisture Absorption at Equilibrium: 1.7 %
- Moisture Absorption at Equilibrium: 5.7 %
- Tensile Strength at Break: 190 MPa
- Elongation at Break: 3.0 %
$ 1600/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.32 g/cc
- Water Absorption: 6.8 - 7.4 %
- Moisture Absorption at Equilibrium: 2.1 - 2.5 %
- Viscosity Measurement: 140
$ 1798/MT
- Density: 1.13 g/cc
- Hardness, Shore A: 91
- Hardness, Shore D: 42
- Tensile Strength, Ultimate: 37.0 MPa
- Tensile Strength, Yield: 1.70 MPa @Strain 300 %
$ 1639/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 2.4 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 35.0 MPa
$ 2162/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 230 °C
- CTE, linear, Parallel to Flow: 185 µm/m-°C @Temperature 20.0 °C
$ 1621/MT
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage: 0.019 cm/cm
- Tensile Strength, Yield: 63.0 MPa
$ 1729/MT
- Density: 1.22 g/cc
- Hardness, Shore A: 94
- Tensile Strength: 5.70 MPa
- Tensile Strength: 10.0 MPa
- Tensile Strength: 22.5 MPa
$ 2014/MT
- Density: 1.13 g/cc
- Relative Viscosity: 2.7 cP
- Viscosity Test: 150 cm³/g
- Melt Flow: 145 g/10 min @Load 5.00 kg, Temperature 275 °C
- Tensile Strength, Yield: 79.0 MPa
$ 1476/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.35 g/cc
- Water Absorption: 5.0 - 6.0 %
- Moisture Absorption at Equilibrium: >= 1.3 %
- Moisture Absorption at Equilibrium: 1.1 - 1.5 %
$ 1741/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.32 g/cc
- Water Absorption: 5.7 - 6.3 %
- Moisture Absorption at Equilibrium: 1.7 - 2.1 %
- Viscosity Measurement: 145
$ 2029/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 65 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2262/MT
- Density: 1.56 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 80 cm³/g
- Linear Mold Shrinkage, Flow: 0.0029 cm/cm
$ 1841/MT
- Density: 1.48 g/cc
- Water Absorption: 6.6 %
- Moisture Absorption at Equilibrium: 2.0 %
- Viscosity Test: 130 cm³/g
- Linear Mold Shrinkage: 0.0040 cm/cm
$ 1599/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.43 g/cc
- Water Absorption: 4.3 - 5.3 %
- Moisture Absorption at Equilibrium: 0.80 - 1.2 %
- Viscosity Measurement: 130
$ 2449/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 0.900 - 1.30 mm
- Softening Point: 70.0 °C
$ 1469/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0350 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 2231/MT
- Density: 1.16 g/cc
- Density: 1.34 g/cc
- Water Absorption: 0.90 %
- Water Absorption: 5.5 %
- Moisture Absorption at Equilibrium: 1.5 %
BASF Luranyl® KR 2454/3 G2 Polyphenylene Ether + Styrene-Butadiene Blend, 10% Glass Fiber Reinforced
$ 1451/MT
- Density: 1.16 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.15 %
- Linear Mold Shrinkage, Flow: 0.0045 cm/cm
- High Load Melt Index: 24 g/10 min @Load 21.6 kg, Temperature 250 °C
$ 2404/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.35 g/cc
- Water Absorption: 5.0 - 6.0 %
- Moisture Absorption at Equilibrium: 1.1 - 1.5 %
- Viscosity Measurement: 130
$ 1486/MT
- Density: 1.58 g/cc
- Water Absorption: 0.90 %
- Moisture Absorption at Equilibrium: 0.15 %
- Melt Flow: 5.5 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 190 MPa
$ 1745/MT
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage: 0.020 cm/cm
- Linear Mold Shrinkage, Flow: 0.021 cm/cm
$ 1933/MT
- Density: 1.24 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.30 %
- Viscosity Test: 81 cm³/g
- Linear Mold Shrinkage, Flow: 0.0072 cm/cm
$ 1530/MT
- Density: 1.48 g/cc
- Water Absorption: 2.2 %
- Water Absorption: 6.6 %
- Moisture Absorption at Equilibrium: 2.0 %
- Viscosity Test: 160 cm³/g
$ 1825/MT
- Density: 1.50 g/cc
- Water Absorption: 1.6 %
- Moisture Absorption at Equilibrium: 0.60 %
- Viscosity Test: 56 cm³/g
- Linear Mold Shrinkage, Flow: 0.0036 cm/cm
$ 2065/MT
- Density: 1.20 g/cc
- Hardness, Shore A: 75
- Tensile Strength: 35.0 MPa
- Tensile Strength: 50.0 MPa
- Tensile Strength: 2.00 MPa @Strain 20.0 %
$ 1527/MT
- Density: 1.16 g/cc
- Water Absorption: 6.5 - 7.5 %
- Moisture Absorption at Equilibrium: 1.6 - 2.0 %
- Viscosity Measurement: 130
- Linear Mold Shrinkage: 0.0060 cm/cm
$ 1699/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 1.7 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 35.0 MPa
$ 1973/MT
- Water Absorption: 1.5 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Hardness, Rockwell R: 82
- Tensile Strength at Break: 60.0 MPa
- Tensile Strength at Break: 100 MPa @Temperature -40.0 °C
$ 1513/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 101 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1455/MT
- Bulk Density: 0.690 - 0.710 g/cc
- Density: 1.12 g/cc
- Water Absorption: 10.5 %
- Moisture Absorption at Equilibrium: 3.2 %
- Viscosity Measurement: 3.19 - 3.41
$ 1682/MT
- Density: 1.36 g/cc
- Water Absorption: 6.3 - 6.9 %
- Moisture Absorption at Equilibrium: 1.9 - 2.3 %
- Viscosity Measurement: 140
- Linear Mold Shrinkage: 0.0035 cm/cm
$ 1684/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.34 g/cc
- Water Absorption: 6.3 - 6.9 %
- Moisture Absorption at Equilibrium: 1.9 - 2.3 %
- Viscosity Measurement: 140
$ 1788/MT
- Density: 1.30 g/cc
- Water Absorption: 0.50 %
- Moisture Absorption at Equilibrium: 0.25 %
- Viscosity Test: 160 cm³/g
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
$ 2196/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 136 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1480/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Relative Viscosity: 5.0 cP
- Viscosity Test: 320 cm³/g
$ 1760/MT
- Density: 1.07 g/cc
- Water Absorption: 1.2 %
- Water Absorption: 7.1 %
- Moisture Absorption at Equilibrium: 2.0 %
- Linear Mold Shrinkage: 0.013 cm/cm
$ 1561/MT
- Density: 1.19 g/cc
- Hardness, Shore A: 85
- Tensile Strength: 2.00 MPa
- Tensile Strength: 5.00 MPa
- Tensile Strength: 10.5 MPa
$ 1563/MT
- Density: 1.12 g/cc @Thickness 2.00 mm
- Hardness, Shore A: 86 @Thickness 2.00 mm
- Tensile Strength, Ultimate: 52.0 MPa @Thickness 2.00 mm
- Tensile Strength, Yield: 7.60 MPa @Strain 100 %
- Tensile Strength, Yield: 19.0 MPa @Strain 300 %, Thickness 0.760 mm
$ 1591/MT
- Density: 1.40 g/cc
- Moisture Absorption at Equilibrium: 1.7 %
- Moisture Absorption at Equilibrium: 5.7 %
- Tensile Strength at Break: 144 MPa
- Flexural Modulus: 2.40 GPa
$ 1504/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Tensile Strength, Ultimate: 80.0 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 7.50 GPa
$ 1464/MT
- Density: 1.13 g/cc
- Tensile Strength at Break: 48.0 MPa
- Elongation at Break: 200 %
- Elongation at Yield: 30 %
- Tensile Modulus: 1.18 GPa
$ 1527/MT
- Density: 1.41 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 12.9 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 155 MPa
$ 1782/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.55 g/cc
- Water Absorption: 4.5 - 5.1 %
- Moisture Absorption at Equilibrium: 1.3 - 1.7 %
- Viscosity Measurement: 135
$ 1824/MT
- Bulk Density: 0.850 g/cc
- Density: 1.35 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 9.45 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1886/MT
- Density: 1.50 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 120
- Viscosity Measurement: 70 @Temperature 290 °C
$ 1445/MT
- Density: 1.36 g/cc
- Water Absorption: 6.3 - 6.9 %
- Moisture Absorption at Equilibrium: 1.9 - 2.3 %
- Viscosity Test: 140 cm³/g
- Linear Mold Shrinkage: 0.0035 cm/cm
$ 2403/MT
- Density: 1.45 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 115
- Viscosity Measurement: 70 @Temperature 290 °C
$ 1568/MT
- Density: 1.37 g/cc
- Water Absorption: 6.9 - 7.5 %
- Moisture Absorption at Equilibrium: 2.1 - 2.5 %
- Viscosity Measurement: 123
- Melt Flow: 116.45 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 1851/MT
- Density: 1.23 g/cc
- Hardness, Shore D: 60
- Tensile Strength: 40.0 MPa
- Tensile Strength: 55.0 MPa
- Tensile Strength: 13.0 MPa @Strain 20.0 %
$ 1994/MT
- Density: 1.13 g/cc
- Water Absorption: 9.0 - 10 %
- Moisture Absorption at Equilibrium: 2.6 - 3.4 %
- Viscosity Measurement: 145
- Linear Mold Shrinkage: 0.0055 cm/cm
$ 1730/MT
- Density: 1.39 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 26 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 125 MPa
$ 1478/MT
- Density: 1.07 g/cc
- Linear Mold Shrinkage, Flow: 0.0080 cm/cm
- Tensile Strength, Yield: 20.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.00 GPa
$ 1984/MT
- Density: 1.13 g/cc
- Moisture Absorption at Equilibrium: 1.6 %
- Moisture Absorption at Equilibrium: 2.7 %
- Moisture Absorption at Equilibrium: 9.5 %
- Tensile Strength, Yield: 80.0 MPa
$ 1596/MT
- Bulk Density: 0.700 g/cc
- Density: 1.12 - 1.15 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: <= 0.40 %
- Moisture Absorption at Equilibrium: 2.2 %
$ 1575/MT
- Bulk Density: 0.700 - 0.800 g/cc
- Density: 1.29 g/cc
- Water Absorption: 1.2 %
- Moisture Absorption at Equilibrium: 0.60 %
- Viscosity Measurement: 71
$ 1448/MT
- Bulk Density: 0.600 - 0.900 g/cc
- Density: 1.47 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 105
$ 1550/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 31 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1534/MT
- Density: 1.52 g/cc
- Water Absorption: 4.2 - 5.2 %
- Moisture Absorption at Equilibrium: 0.80 - 1.2 %
- Viscosity Measurement: 130
- Linear Mold Shrinkage: 0.0047 cm/cm
$ 1635/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0045 cm/cm
- Melt Flow: 10 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1521/MT
- Density: 1.37 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 8.5 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 105 MPa @Load 36.5 kg, Time 30.0 sec
$ 1531/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 230 °C
- CTE, linear, Parallel to Flow: 185 µm/m-°C @Temperature 20.0 °C
$ 1605/MT
- Bulk Density: 0.0630 - 0.0770 g/cc
- Density: 0.110 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 3000 µm
$ 1499/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.36 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Melt Flow: 68 g/10 min @Load 5.00 kg, Temperature 275 °C
- Melting Point: 220 °C
$ 1559/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 32 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 34.0 MPa
$ 1655/MT
- Density: 1.06 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- High Load Melt Index: 110 g/10 min @Load 21.6 kg, Temperature 250 °C
$ 1454/MT
- Density: 1.36 g/cc
- Water Absorption: 5.2 - 5.8 %
- Moisture Absorption at Equilibrium: 1.5 - 1.9 %
- Viscosity Test: 145 cm³/g
- Linear Mold Shrinkage: 0.0055 cm/cm
$ 2174/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.0125 cm/cm
- Tensile Strength, Yield: 28.0 MPa
- Tensile Modulus: 2.40 GPa
- Charpy Impact Unnotched: 7.50 J/cm²
$ 1445/MT
- Density: 1.39 g/cc
- Water Absorption: 1.1 %
- Water Absorption: 6.4 %
- Moisture Absorption at Equilibrium: 1.8 %
- Relative Viscosity: 2.6 cP
$ 1922/MT
- Density: 1.19 g/cc
- Hardness, Shore A: 60
- Tensile Strength: 30.0 MPa
- Tensile Strength: 1.00 MPa @Strain 20.0 %
- Tensile Strength: 2.50 MPa @Strain 100 %
$ 2489/MT
- Density: 1.13 g/cc
- Water Absorption: 8.0 - 9.0 %
- Moisture Absorption at Equilibrium: 2.5 - 3.1 %
- Viscosity Measurement: 150
- Linear Mold Shrinkage: 0.0085 cm/cm
$ 1889/MT
- Density: 1.56 g/cc
- Moisture Absorption at Equilibrium: 1.4 %
- Moisture Absorption at Equilibrium: 4.8 %
- Tensile Strength at Break: 210 MPa
- Elongation at Break: 2.0 %
$ 2508/MT
- Bulk Density: 0.850 g/cc
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
$ 2046/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1555/MT
- Density: 1.48 g/cc
- Water Absorption: 6.3 - 6.9 %
- Moisture Absorption at Equilibrium: 1.8 - 2.2 %
- Viscosity Measurement: 135
- Linear Mold Shrinkage: 0.0040 cm/cm
$ 2181/MT
- Density: 1.55 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 116 cm³/g
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
$ 1797/MT
- Density: 1.39 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 107
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
$ 1583/MT
- Bulk Density: 0.600 - 0.900 g/cc
- Density: 1.45 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 107
$ 1902/MT
- Density: 1.62 g/cc
- Moisture Absorption at Equilibrium: 0.90 %
- Moisture Absorption at Equilibrium: 1.1 %
- Moisture Absorption at Equilibrium: 4.0 %
- Linear Mold Shrinkage: 0.00762 cm/cm
$ 1518/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 0.700 - 1.00 mm
- Softening Point: 70.0 °C
$ 1475/MT
- Density: 1.06 g/cc
- Water Absorption: 6.8 %
- Moisture Absorption at Equilibrium: 1.9 %
- Linear Mold Shrinkage: 0.013 cm/cm
- Hardness, Rockwell R: 80
$ 1838/MT
- Bulk Density: 0.600 - 0.900 g/cc
- Density: 1.60 - 1.70 g/cc
- Melting Point: 220 - 230 °C
- Decomposition Temperature: >= 290 °C
- Commercial Status: Europe
- Ignition Temperature: >350°C
$ 1790/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0350 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 2049/MT
- Density: 1.25 g/cc
- Hardness, Shore D: 64
- Tensile Strength, Ultimate: 39.0 MPa
- Tensile Strength, Yield: 27.0 MPa @Strain 100 %
- Tensile Strength, Yield: 37.0 MPa @Strain 300 %
$ 1469/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0350 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1785/MT
- Density: 1.21 g/cc
- Hardness, Shore A: 85
- Tensile Strength, Ultimate: 46.0 MPa
- Tensile Strength, Yield: 5.80 MPa @Strain 100 %
- Tensile Strength, Yield: 11.0 MPa @Strain 300 %
$ 1446/MT
- Density: 0.0100 - 0.100 g/cc @Pressure 0.101 MPa, Temperature 20.0 °C
- Decomposition Temperature: >= 140 °C
- Flash Point: >= 200 °C
- Melt Temperature: 100 - 140 °C
- Commercial Status: Europe
- Ignition Temperature: >360°C
$ 1576/MT
- Density: 0.0100 - 0.100 g/cc @Pressure 0.101 MPa, Temperature 20.0 °C
- Decomposition Temperature: >= 140 °C
- Flash Point: >= 200 °C
- Melt Temperature: 100 - 140 °C
- Commercial Status: Europe
- Ignition Temperature: >360°C
$ 2231/MT
- Density: 0.0100 - 0.100 g/cc @Pressure 0.101 MPa, Temperature 20.0 °C
- Decomposition Temperature: >= 140 °C
- Flash Point: >= 200 °C
- Melt Temperature: 100 - 140 °C
- Commercial Status: Europe
- Ignition Temperature: >360°C
$ 2085/MT
- Density: 0.0100 - 0.100 g/cc @Pressure 0.101 MPa, Temperature 20.0 °C
- Decomposition Temperature: >= 140 °C
- Flash Point: >= 200 °C
- Melt Temperature: 100 - 140 °C
- Commercial Status: Europe
- Ignition Temperature: >360°C
$ 1842/MT
- Density: 0.0100 - 0.100 g/cc @Pressure 0.101 MPa, Temperature 20.0 °C
- Decomposition Temperature: >= 140 °C
- Flash Point: >= 200 °C
- Melt Temperature: 100 - 140 °C
- Commercial Status: Europe
- Ignition Temperature: >360°C
$ 1843/MT
- Density: 0.0100 - 0.100 g/cc @Pressure 0.101 MPa, Temperature 20.0 °C
- Decomposition Temperature: >= 140 °C
- Flash Point: >= 200 °C
- Melt Temperature: 100 - 140 °C
- Commercial Status: Europe
- Ignition Temperature: >360°C
$ 2145/MT
- Bulk Density: 0.0130 - 0.0170 g/cc
- Density: 0.0200 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 6000 µm
$ 1608/MT
- Bulk Density: 0.0130 - 0.0170 g/cc
- Density: 0.0400 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 6000 µm
$ 1762/MT
- Bulk Density: 0.0150 - 0.0190 g/cc
- Density: 0.0200 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2000 µm
- Particle Size: <= 5000 µm
$ 1498/MT
- Bulk Density: 0.0150 - 0.0190 g/cc
- Density: 0.0300 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2000 µm
- Particle Size: <= 5000 µm
$ 1577/MT
- Bulk Density: 0.0190 - 0.0232 g/cc
- Density: 0.0250 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2000 µm
- Particle Size: <= 5500 µm
$ 1605/MT
- Bulk Density: 0.0190 - 0.0232 g/cc
- Density: 0.0300 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2000 µm
- Particle Size: <= 5500 µm
$ 1931/MT
- Bulk Density: 0.0190 - 0.0232 g/cc
- Density: 0.0400 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2000 µm
- Particle Size: <= 5500 µm
$ 1544/MT
- Bulk Density: 0.0190 - 0.0232 g/cc
- Density: 0.0500 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2000 µm
- Particle Size: <= 5500 µm
$ 1631/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0350 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 2172/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0400 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1482/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0500 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1927/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0600 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1508/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0700 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 2238/MT
- Bulk Density: 0.0220 - 0.0260 g/cc
- Density: 0.0400 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 4500 µm
$ 1722/MT
- Bulk Density: 0.0220 - 0.0260 g/cc
- Density: 0.0500 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 4500 µm
$ 1857/MT
- Bulk Density: 0.0220 - 0.0260 g/cc
- Density: 0.0600 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 4500 µm
$ 2055/MT
- Bulk Density: 0.0260 - 0.0300 g/cc
- Density: 0.0600 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 4000 µm
$ 2230/MT
- Bulk Density: 0.0260 - 0.0300 g/cc
- Density: 0.0700 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 4000 µm
$ 1595/MT
- Bulk Density: 0.0260 - 0.0300 g/cc
- Density: 0.0400 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 4000 µm
$ 1458/MT
- Bulk Density: 0.0260 - 0.0300 g/cc
- Density: 0.0500 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 4000 µm
$ 2139/MT
- Bulk Density: 0.0260 - 0.0300 g/cc
- Density: 0.0600 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 4000 µm
$ 2051/MT
- Bulk Density: 0.0260 - 0.0300 g/cc
- Density: 0.0500 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 4000 µm
$ 1961/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0400 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1534/MT
- Bulk Density: 0.0500 - 0.0600 g/cc
- Density: 0.0700 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1598/MT
- Bulk Density: 0.0630 - 0.0770 g/cc
- Density: 0.0800 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 3000 µm
$ 2013/MT
- Bulk Density: 0.0630 - 0.0770 g/cc
- Density: 0.0900 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 3000 µm
$ 2143/MT
- Bulk Density: 0.0630 - 0.0770 g/cc
- Density: 0.0100 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 3000 µm
$ 2257/MT
- Bulk Density: 0.0730 - 0.0870 g/cc
- Density: 0.0700 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 3000 µm
$ 1848/MT
- Bulk Density: 0.0730 - 0.0870 g/cc
- Density: 0.0900 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 3000 µm
$ 1451/MT
- Bulk Density: 0.0290 - 0.0350 g/cc
- Density: 0.0350 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1734/MT
- Bulk Density: 0.0290 - 0.0350 g/cc
- Density: 0.0400 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1660/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0500 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1799/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0600 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1805/MT
- Density: 1.18 g/cc
- Hardness, Shore D: 64
- Tensile Strength, Ultimate: 41.0 MPa
- Tensile Strength, Yield: 25.0 MPa @Strain 100 %
- Tensile Strength, Yield: 33.0 MPa @Strain 300 %
$ 1498/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0350 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1722/MT
- Density: 1.24 g/cc
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Tensile Strength, Yield: 22.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.50 GPa
$ 1552/MT
- Density: 1.28 g/cc
- Hardness, Shore D: 64
- Tensile Strength: 45.0 MPa
- Elongation at Break: 350 %
- Tear Strength: 200 kN/m
$ 1548/MT
- Density: 1.07 g/cc
- Moisture Absorption at Equilibrium: 1.1 %
- Moisture Absorption at Equilibrium: 1.9 %
- Moisture Absorption at Equilibrium: 6.7 %
- Linear Mold Shrinkage: 0.03556 cm/cm
$ 1962/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0700 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1502/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Relative Viscosity: 3.3 cP
- Viscosity Test: 195 cm³/g
$ 2532/MT
- Density: 1.27 g/cc
- Hardness, Shore A: 88
- Tensile Strength, Ultimate: 33.0 MPa
- Tensile Strength, Yield: 7.00 MPa @Strain 100 %
- Tensile Strength, Yield: 15.5 MPa @Strain 300 %
$ 1770/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0055 cm/cm
- Melt Flow: 4.0 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1736/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.51 g/cc
- Viscosity Measurement: 142
- Ball Indentation Hardness: 250 MPa @Load 3.06 kg
- Tensile Strength, Yield: 140 MPa
$ 1892/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.5 %
- Linear Mold Shrinkage: 0.016 cm/cm
- Tensile Strength, Yield: 69.0 MPa
$ 1576/MT
- Density: 1.30 g/cc
- Water Absorption: 0.50 %
- Moisture Absorption at Equilibrium: 0.25 %
- Viscosity Test: 130 cm³/g
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
$ 2562/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0055 cm/cm
- Melt Flow: 4.0 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1596/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1883/MT
- Density: 1.19 g/cc
- Hardness, Shore A: 88
- Hardness, Shore D: 37
- Tensile Strength: 38.0 MPa
- Tensile Strength: 50.0 MPa
$ 2239/MT
- Density: 1.08 g/cc
- Tensile Strength, Yield: 46.0 MPa
- Elongation at Break: 50 %
- Flexural Modulus: 1.703 GPa
- Izod Impact, Notched (ISO): 22.0 kJ/m² @Temperature -40.0 °C
$ 1657/MT
- Density: 1.37 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage: 0.019 cm/cm
- Linear Mold Shrinkage, Flow: 0.019 cm/cm
$ 1809/MT
- Density: 1.56 g/cc
- Water Absorption: 3.7 - 4.3 %
- Moisture Absorption at Equilibrium: 1.0 - 1.4 %
- Viscosity Measurement: 130
- Linear Mold Shrinkage: 0.0045 cm/cm
$ 2013/MT
- Density: 1.32 g/cc
- Density: 1.55 g/cc
- Viscosity Measurement: 0.55
- Linear Mold Shrinkage: 0.0040 cm/cm
- Hardness, Rockwell R: 118
$ 2052/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1879/MT
- Density: 1.24 g/cc
- Linear Mold Shrinkage, Flow: 0.011 cm/cm
- Tensile Strength, Yield: 32.0 MPa
- Elongation at Break: 7.0 %
- Tensile Modulus: 4.50 GPa
$ 2200/MT
- Density: 1.14 g/cc
- Hardness, Shore A: 95
- Hardness, Shore D: 47
- Tensile Strength, Ultimate: 36.0 MPa
- Tensile Strength, Yield: 12.0 MPa @Strain 100 %
$ 1545/MT
- Density: 1.47 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 105 cm³/g
- Linear Mold Shrinkage, Flow: 0.0010 cm/cm
$ 1795/MT
- Density: 1.24 g/cc
- Linear Mold Shrinkage, Flow: 0.010 cm/cm
- Tensile Strength, Yield: 33.0 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 4.40 GPa
$ 1807/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.23 g/cc
- Water Absorption: 7.7 - 8.3 %
- Moisture Absorption at Equilibrium: 2.3 - 2.9 %
- Viscosity Measurement: 170
$ 1809/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1900/MT
- Density: 1.23 g/cc
- Hardness, Shore A: 85
- Tensile Strength: 55.0 MPa
- Tensile Strength: 2.00 MPa @Strain 20.0 %
- Tensile Strength: 5.00 MPa @Strain 100 %
$ 1566/MT
- Bulk Density: 0.640 - 0.740 g/cc
- Density: 1.12 - 1.15 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Viscosity Measurement: 3.89 - 4.17
$ 1796/MT
- Density: 1.15 g/cc
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: >= 50 %
- Elongation at Yield: 20 %
- Tensile Modulus: 1.50 GPa
$ 2119/MT
- Bulk Density: 0.640 - 0.740 g/cc
- Density: 1.12 - 1.15 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Viscosity Measurement: 3.89 - 4.17
$ 1776/MT
- Density: 1.33 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 110
- Viscosity Measurement: 70 @Temperature 290 °C
$ 1597/MT
- Density: 1.23 g/cc
- Water Absorption: 7.7 - 8.3 %
- Moisture Absorption at Equilibrium: 2.3 %
- Moisture Absorption at Equilibrium: 2.3 - 2.9 %
- Moisture Absorption at Equilibrium: 7.7 %
$ 1973/MT
- Density: 1.33 g/cc
- Water Absorption: 5.9 - 6.5 %
- Moisture Absorption at Equilibrium: 1.8 - 2.2 %
- Viscosity Measurement: 160
- Linear Mold Shrinkage: 0.0050 cm/cm
$ 2023/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 31 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2002/MT
- Density: 1.36 g/cc
- Moisture Absorption at Equilibrium: 2.1 %
- Moisture Absorption at Equilibrium: 6.6 %
- Melt Flow: 40.8 g/10 min @Load 5.00 kg, Temperature 275 °C
- Tensile Strength at Break: 100 MPa
$ 1692/MT
- Density: 1.49 g/cc
- Moisture Absorption at Equilibrium: 0.90 %
- Moisture Absorption at Equilibrium: 1.5 %
- Moisture Absorption at Equilibrium: 5.2 %
- Melt Temperature: 280 - 305 °C
$ 1587/MT
- Density: 1.30 g/cc
- Water Absorption: 0.50 %
- Moisture Absorption at Equilibrium: 0.25 %
- Viscosity Test: 107 cm³/g
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
$ 1608/MT
- Density: 1.35 g/cc
- Hardness, Shore D: 64
- Tensile Strength: 65.0 MPa
- Elongation at Break: 20 %
- Charpy Impact Unnotched: 8.00 J/cm² @Temperature -30.0 °C
$ 1542/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.37 g/cc
- Water Absorption: 4.0 - 5.0 %
- Moisture Absorption at Equilibrium: 0.60 - 1.0 %
- Viscosity Measurement: 130
$ 2274/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 5.4 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2585/MT
- Density: 1.36 g/cc
- Moisture Absorption at Equilibrium: 1.7 %
- Moisture Absorption at Equilibrium: 5.5 %
- Tensile Strength at Break: 170 MPa
- Elongation at Break: 2.5 %
$ 1948/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.31 g/cc
- Moisture Absorption at Equilibrium: 2.0 - 2.4 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Linear Mold Shrinkage, Flow: 0.0080 cm/cm
$ 1867/MT
- Density: 0.927 g/cc
- Tensile Strength, Yield: 6.00 MPa
- Elongation at Break: >= 50 %
- Tensile Modulus: 0.0840 GPa
- Melting Point: 96.0 °C
- Electrical Resistivity: >= 1.00e+15 ohm-cm
$ 2139/MT
- Density: 1.10 g/cc
- Water Absorption: 8.5 - 9.5 %
- Moisture Absorption at Equilibrium: 2.1 - 2.9 %
- Melt Flow: 121 g/10 min @Load 5.00 kg, Temperature 275 °C
- Tensile Strength, Yield: 70.0 MPa
$ 1751/MT
- Density: 1.17 g/cc
- Hardness, Shore A: 65
- Tensile Strength: 20.0 MPa
- Tensile Strength: 20.0 MPa
- Tensile Strength: 1.00 MPa @Strain 20.0 %
$ 1683/MT
- Density: 1.12 g/cc @Thickness 2.00 mm
- Hardness, Shore A: 86 @Thickness 2.00 mm
- Tensile Strength, Ultimate: 52.0 MPa @Thickness 2.00 mm
- Tensile Strength, Yield: 7.60 MPa @Strain 100 %
- Tensile Strength, Yield: 19.0 MPa @Strain 300 %
$ 1735/MT
- Density: 1.48 g/cc
- Water Absorption: 6.3 - 6.9 %
- Moisture Absorption at Equilibrium: 1.8 - 2.2 %
- Viscosity Measurement: 135
- Linear Mold Shrinkage: 0.0040 cm/cm
$ 2155/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 0.900 - 1.30 mm
- Softening Point: 70.0 °C
$ 1746/MT
- Bulk Density: 0.640 g/cc
- Density: 0.0160 - 0.0480 g/cc
- Bead Size: 0.600 - 1.20 mm
- Moisture Content: <= 1.2 %
- Commercial Status: North America
- Pentane Content: 5.7 - 6.4%
$ 1630/MT
- Density: 1.24 g/cc
- Hardness, Shore D: 64
- Tensile Strength, Ultimate: 40.0 MPa
- Tensile Strength, Yield: 26.0 MPa @Strain 100 %
- Tensile Strength, Yield: 38.0 MPa @Strain 300 %
$ 1505/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1548/MT
- Density: 0.0300 g/cc
- Water Absorption: 0.20 %
- Water Absorption: <= 3.0 %
- Water Vapor Transmission: 100 - 150 g/m²/day
- Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C
$ 2051/MT
- Bulk Density: 0.640 g/cc
- Density: 0.0150 - 0.0800 g/cc
- Bead Size: 0.600 - 1.20 mm
- Moisture Content: <= 1.2 %
- Commercial Status: North America
- Pentane Content: 3.75 - 3.95%
$ 1928/MT
- Density: 1.61 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0055 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0147 cm/cm
$ 1533/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 1.40 - 2.50 mm
- Softening Point: 70.0 °C
$ 2105/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 65 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1531/MT
- Density: 1.44 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- Tensile Strength at Break: 105 MPa
- Tensile Strength, Ultimate: 105 MPa
- Elongation at Break: 3.5 %
$ 1448/MT
- Density: 1.28 g/cc
- Hardness, Shore A: 95
- Tensile Strength, Ultimate: 34.5 MPa
- Tensile Strength, Yield: 21.0 MPa @Strain 100 %
- Tensile Strength, Yield: 30.0 MPa @Strain 300 %
$ 1512/MT
- Transmission, Visible: 40 % @Wavelength 700 nm
- Transmission, Visible: 40 % @Wavelength 2300 nm
- Transmission, Visible: 60 % @Wavelength 1700 nm
- Transmission, Visible: 65 % @Wavelength 2100 nm
- Transmission, Visible: 70 % @Wavelength 1300 nm
- Commercial Status: Europe
$ 2362/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0055 cm/cm
- Melt Flow: 5.0 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1501/MT
- Bulk Density: 0.0160 - 0.0350 g/cc
- Density: 0.0350 g/cc
- Flexural Strength: 0.237 MPa
- Flexural Strength: 0.247 MPa
- Flexural Strength: 0.257 MPa
$ 2387/MT
- Density: 1.29 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 139
- Linear Mold Shrinkage, Flow: 0.010 cm/cm
$ 1470/MT
- Density: 1.19 g/cc
- Hardness, Shore A: 82
- Tensile Strength: 40.0 MPa
- Tensile Strength: 50.0 MPa
- Tensile Strength: 2.00 MPa @Strain 20.0 %
$ 1746/MT
- Density: 1.21 g/cc
- Hardness, Shore A: 86
- Tensile Strength: 40.0 MPa
- Tensile Strength: 50.0 MPa
- Tensile Strength: 2.80 MPa @Strain 20.0 %
$ 2269/MT
- Density: 1.21 g/cc
- Hardness, Shore A: 85
- Tensile Strength, Ultimate: 31.3 MPa
- Tensile Strength, Yield: 6.30 MPa @Strain 100 %
- Tensile Strength, Yield: 12.8 MPa @Strain 300 %
$ 1522/MT
- Density: 1.04 g/cc
- Tensile Strength at Break: 48.0 MPa
- Elongation at Break: 200 %
- Flexural Modulus: 0.750 GPa
- Izod Impact, Notched (ISO): 104 kJ/m²
$ 1972/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0055 cm/cm
- Melt Flow: 23 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 2148/MT
- Density: 1.45 g/cc
- Water Absorption: 4.4 - 5.0 %
- Moisture Absorption at Equilibrium: 1.0 - 1.4 %
- Viscosity Test: 140 cm³/g
- Linear Mold Shrinkage: 0.0045 cm/cm
$ 1527/MT
- Density: 1.291 g/cc
- Density: 1.49 g/cc
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.6 %
- Tensile Strength, Ultimate: 60.0 MPa
$ 2573/MT
- Density: 1.31 g/cc
- Moisture Absorption at Equilibrium: 2.0 - 2.4 %
- Viscosity Measurement: 130
- Melt Flow: 157.2 g/10 min @Load 5.00 kg, Temperature 275 °C
- Tensile Strength, Yield: 45.0 MPa
$ 1862/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Relative Viscosity: 3.2 cP
- Viscosity Test: 184 cm³/g
$ 2186/MT
- Density: 1.10 g/cc
- Moisture Absorption at Equilibrium: 2.4 %
- Moisture Absorption at Equilibrium: 8.6 %
- Tensile Strength, Yield: 36.0 MPa
- Elongation at Break: >= 100 %
$ 1577/MT
- Density: 1.41 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 5.0 %
- Moisture Absorption at Equilibrium: 1.6 %
- Tensile Strength, Ultimate: 190 MPa
$ 1635/MT
- Density: 1.38 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 94 cm³/g
- Linear Mold Shrinkage, Flow: 0.0041 cm/cm
$ 1464/MT
- Density: 1.23 g/cc
- Hardness, Shore A: 85
- Tensile Strength: 35.0 MPa
- Tensile Strength: 50.0 MPa
- Tensile Strength: 3.50 MPa @Strain 20.0 %
$ 1456/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage, Flow: 0.0080 cm/cm
- Tensile Strength, Yield: 23.0 MPa
- Elongation at Break: 30 %
- Tensile Modulus: 1.95 GPa
$ 2246/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0055 cm/cm
- Melt Flow: 3.0 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1920/MT
- Bulk Density: 0.600 - 0.900 g/cc
- Density: 1.73 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 90
$ 1804/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.36 g/cc
- Water Absorption: 5.9 - 6.5 %
- Moisture Absorption at Equilibrium: 2.2 - 2.6 %
- Viscosity Measurement: 145
$ 1614/MT
- Bulk Density: 0.0390 - 0.0400 g/cc
- Density: >= 1.10 g/cc
- Commercial Status: North America
- Stabilization: 30 sec
- Steam time: 3 - 9 sec
$ 1923/MT
- Density: 1.49 g/cc
- Water Absorption: 1.1 %
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.6 %
- Linear Mold Shrinkage: 0.0090 cm/cm
$ 2122/MT
- Density: 1.17 g/cc
- Hardness, Shore A: 70
- Tensile Strength: 30.0 MPa
- Tensile Strength: 45.0 MPa
- Tensile Strength: 1.50 MPa @Strain 20.0 %
$ 1528/MT
- Density: 1.16 g/cc
- Density: 1.34 g/cc
- Water Absorption: 0.90 %
- Water Absorption: 5.5 %
- Moisture Absorption at Equilibrium: 1.5 %
$ 1481/MT
- Bulk Density: 0.640 g/cc
- Density: 0.0180 - 0.0650 g/cc
- Bead Size: 0.420 - 0.850 mm
- Moisture Content: <= 1.2 %
- Commercial Status: North America
- Pentane Content: 3.75 - 3.95%
$ 1717/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.36 g/cc
- Water Absorption: 6.3 - 6.9 %
- Moisture Absorption at Equilibrium: 1.9 - 2.3 %
- Viscosity Measurement: 145
$ 1971/MT
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 30 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 135 MPa @Load 36.5 kg, Time 30.0 sec
$ 1498/MT
- Density: 1.343 g/cc
- Water Absorption: 3.8 %
- Moisture Absorption at Equilibrium: 1.3 %
- Viscosity Measurement: 150
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
$ 1608/MT
- Bulk Density: 0.450 - 0.800 g/cc
- Density: 1.16 g/cc
- Water Absorption: 6.5 - 7.5 %
- Moisture Absorption at Equilibrium: 1.6 - 2.0 %
- Viscosity Measurement: 130
$ 1490/MT
- Density: 1.36 g/cc
- Water Absorption: 6.3 - 6.9 %
- Moisture Absorption at Equilibrium: 1.9 - 2.3 %
- Viscosity Test: 140 cm³/g
- Linear Mold Shrinkage: 0.0035 cm/cm
$ 1677/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1966/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 26.0 MPa
$ 1679/MT
- Density: 1.39 g/cc
- Water Absorption: 0.70 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 63 cm³/g
- Linear Mold Shrinkage, Flow: 0.0031 cm/cm
$ 2140/MT
- Density: 1.36 g/cc
- Water Absorption: 5.2 - 5.8 %
- Moisture Absorption at Equilibrium: 1.5 - 1.9 %
- Viscosity Measurement: 145
- Linear Mold Shrinkage: 0.0055 cm/cm
$ 2171/MT
- Density: 1.20 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption at Equilibrium: 2.1 %
- Viscosity Test: 148 cm³/g
- Linear Mold Shrinkage: 0.0080 cm/cm
$ 1814/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.32 g/cc
- Water Absorption: 6.8 - 7.4 %
- Moisture Absorption at Equilibrium: 2.1 - 2.5 %
- Viscosity Measurement: 140
$ 1748/MT
- Density: 1.43 g/cc
- Water Absorption: 5.4 - 6.0 %
- Moisture Absorption at Equilibrium: 1.6 - 2.0 %
- Viscosity Test: 140 cm³/g
- Melt Flow: 78.65 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 1444/MT
- Density: 1.55 g/cc
- Viscosity Measurement: 0.55
- Linear Mold Shrinkage: 0.0040 cm/cm
- Hardness, Rockwell R: 118
- Tensile Strength at Break: 145 MPa
$ 1539/MT
- Density: 1.33 g/cc
- Water Absorption: 1.1 %
- Moisture Absorption at Equilibrium: 0.25 %
- Linear Mold Shrinkage: 0.019 cm/cm
- Linear Mold Shrinkage, Flow: 0.016 cm/cm
$ 1876/MT
- Density: 1.34 g/cc
- Water Absorption: 0.90 %
- Water Absorption: 5.5 %
- Moisture Absorption at Equilibrium: 1.5 %
- Linear Mold Shrinkage: 0.0030 cm/cm
$ 1467/MT
- Density: 1.10 g/cc
- Water Absorption: 8.5 - 9.5 %
- Moisture Absorption at Equilibrium: 2.1 - 2.9 %
- Linear Mold Shrinkage: 0.0065 cm/cm
- Melt Flow: 121 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 1590/MT
- Density: 1.24 g/cc
- Hardness, Shore D: 60
- Tensile Strength, Ultimate: 43.0 MPa
- Tensile Strength, Yield: 24.0 MPa @Strain 100 %
- Tensile Strength, Yield: 42.0 MPa @Strain 300 %
$ 2044/MT
- Density: 0.00400 - 0.0120 g/cc @Pressure 0.1013 MPa, Temperature 20.0 °C
- Decomposition Temperature: >= 350 °C
- Color: Yellow
- Commercial Status: Europe
- Ignition Temperature: > 580°C
$ 1703/MT
- Density: 1.13 g/cc @Thickness 2.00 mm
- Hardness, Shore A: 90 @Thickness 2.00 mm
- Tensile Strength, Ultimate: 55.0 MPa @Thickness 2.00 mm
- Tensile Strength, Yield: 9.00 MPa @Strain 100 %
- Tensile Strength, Yield: 25.0 MPa @Strain 300 %
$ 1601/MT
- Bulk Density: 0.640 - 0.740 g/cc
- Density: 1.12 - 1.15 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Viscosity Measurement: 3.49 - 3.71
$ 1823/MT
- Density: 1.22 g/cc
- Hardness, Shore D: 52
- Tensile Strength: 40.0 MPa
- Tensile Strength: 50.0 MPa
- Tensile Strength: 11.0 MPa @Strain 20.0 %
$ 1508/MT
- Density: 1.07 g/cc
- Water Absorption: 1.1 %
- Water Absorption: 6.7 %
- Moisture Absorption at Equilibrium: 1.9 %
- Linear Mold Shrinkage: 0.014 cm/cm
$ 1774/MT
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 145 MPa
$ 1460/MT
- Density: 1.15 g/cc
- Hardness, Shore A: 87
- Hardness, Shore D: 39
- Tensile Strength: 30.0 MPa
- Tensile Strength: 35.0 MPa
$ 1625/MT
- Density: 1.40 g/cc
- Water Absorption: 4.7 - 5.3 %
- Moisture Absorption at Equilibrium: 1.4 - 1.8 %
- Viscosity Measurement: 160
- Linear Mold Shrinkage: 0.0035 cm/cm
$ 1825/MT
- Density: 1.48 g/cc
- Water Absorption: 0.90 %
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.6 %
- Linear Mold Shrinkage: 0.0040 cm/cm
$ 2554/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0055 cm/cm
- Melt Flow: 7.5 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1631/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.24 g/cc
- Water Absorption: 7.7 - 8.3 %
- Moisture Absorption at Equilibrium: 2.3 - 2.9 %
- Moisture Absorption at Equilibrium: 2.6 %
$ 1750/MT
- Density: 1.26 g/cc
- Hardness, Shore D: 74
- Tensile Strength, Ultimate: 41.0 MPa
- Tensile Strength, Yield: 36.0 MPa @Strain 100 %
- Tensile Strength, Yield: 39.0 MPa @Strain 300 %
$ 1615/MT
- Density: 1.16 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.9 %
- Linear Mold Shrinkage: 0.0080 cm/cm
- Tensile Strength, Yield: 84.0 MPa
$ 1445/MT
- Density: 1.26 g/cc
- Hardness, Shore D: 53
- Tensile Strength: 50.0 MPa
- Elongation at Break: 500 %
- Tear Strength: 150 kN/m
$ 2030/MT
- Density: 1.36 g/cc
- Water Absorption: 5.9 - 6.5 %
- Moisture Absorption at Equilibrium: 2.2 - 2.6 %
- Viscosity Measurement: 145
- Linear Mold Shrinkage: 0.0075 cm/cm
$ 1941/MT
- Density: 1.48 g/cc
- Water Absorption: 0.90 %
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.6 %
- Linear Mold Shrinkage: 0.0040 cm/cm
$ 1949/MT
- Bulk Density: 0.850 g/cc
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.023 cm/cm
$ 1495/MT
- Density: 1.48 g/cc
- Water Absorption: 6.6 %
- Moisture Absorption at Equilibrium: 2.0 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Tensile Strength, Ultimate: 122 MPa
$ 2517/MT
- Density: 1.40 g/cc
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.7 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 190 MPa
$ 1637/MT
- Density: 1.24 g/cc
- Hardness, Shore D: 64
- Tensile Strength: 40.0 MPa
- Tensile Strength: 55.0 MPa
- Tensile Strength: 17.0 MPa @Strain 20.0 %
$ 1588/MT
- Density: 1.29 g/cc
- Melt Flow: 258 g/10 min @Load 5.00 kg, Temperature 275 °C
- Tensile Strength, Yield: 70.0 MPa
- Elongation at Yield: 3.4 %
- Modulus of Elasticity: 3.60 GPa
$ 1503/MT
- Density: 1.27 g/cc
- Hardness, Shore D: 58
- Tensile Strength: 20.0 MPa
- Tensile Strength: 30.0 MPa
- Tensile Strength: 13.0 MPa @Strain 20.0 %
$ 1763/MT
- Density: 1.75 g/cc
- Tensile Strength at Break: 220 MPa
- Tensile Modulus: 20.83 GPa
- Flexural Strength: 351 MPa
- Flexural Modulus: 19.4 GPa
$ 1466/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 0.700 - 1.00 mm
- Vapor Pressure: 0.685 bar @Temperature 25.0 °C
$ 2583/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.31 g/cc
- Moisture Absorption at Equilibrium: 2.0 - 2.4 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 157.2 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 1738/MT
- Density: 1.25 g/cc
- Hardness, Shore D: 60
- Tensile Strength: 45.0 MPa
- Tensile Strength: 15.0 MPa @Strain 20.0 %
- Tensile Strength: 18.0 MPa @Strain 100 %
$ 1518/MT
- Density: 1.291 g/cc
- Density: 1.49 g/cc
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.6 %
- Tensile Strength, Ultimate: 85.0 MPa
$ 1804/MT
- Density: 0.924 g/cc
- Water Absorption: 0.050 %
- Moisture Absorption at Equilibrium: 0.050 %
- Tensile Strength, Ultimate: 14.0 MPa
- Tensile Strength, Yield: 4.00 MPa
$ 1456/MT
- Density: 1.44 g/cc
- Density: 1.70 g/cc
- Viscosity Measurement: 0.52
- Linear Mold Shrinkage: 0.0020 cm/cm
- Hardness, Rockwell R: 116
$ 1754/MT
- Density: 1.24 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.30 %
- Viscosity Test: 72 cm³/g
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm
$ 1843/MT
- Density: 1.39 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Tensile Strength, Ultimate: 98.0 MPa
- Elongation at Break: 2.8 %
$ 2145/MT
- Density: 1.47 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 111 cm³/g
- Tensile Strength, Ultimate: 120 MPa
$ 2021/MT
- Density: 1.68 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Hardness, Rockwell R: 118
- Tensile Strength at Break: 125 MPa
- Tensile Strength at Break: 50.0 MPa @Temperature 120 °C
$ 2544/MT
- Density: 0.927 g/cc
- Tensile Strength, Yield: 6.00 MPa
- Elongation at Break: >= 50 %
- Tensile Modulus: 0.0840 GPa
- Melting Point: 96.0 °C
- Electrical Resistivity: >= 1.00e+15 ohm-cm
$ 2164/MT
- Density: 0.928 g/cc
- Water Absorption: 0.050 %
- Moisture Absorption at Equilibrium: 0.050 %
- Tensile Strength, Ultimate: 15.0 MPa
- Tensile Strength, Yield: 5.00 MPa
$ 1599/MT
- Density: 0.928 g/cc
- Water Absorption: 0.050 %
- Moisture Absorption at Equilibrium: 0.050 %
- Tensile Strength, Ultimate: 15.0 MPa
- Tensile Strength, Yield: 5.00 MPa
$ 1976/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.23 g/cc
- Water Absorption: 7.7 - 8.3 %
- Moisture Absorption at Equilibrium: 2.3 - 2.9 %
- Viscosity Measurement: 170
$ 2164/MT
- Density: 1.33 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 8.1 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 65.0 MPa @Load 36.5 kg, Time 30.0 sec
$ 1674/MT
- Density: 1.34 g/cc
- Water Absorption: 6.3 - 6.9 %
- Moisture Absorption at Equilibrium: 1.9 - 2.3 %
- Viscosity Test: 140 cm³/g
- Linear Mold Shrinkage: 0.0050 cm/cm
$ 1449/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1780/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Softening Point: 70.0 °C
- Decomposition Temperature: >= 220 °C
$ 1699/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage: 0.020 cm/cm
- Melt Flow: 9.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 61.0 MPa
- Tensile Strength, Yield: 61.0 MPa
$ 1554/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1890/MT
- Density: 1.24 g/cc
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Tensile Strength, Yield: 25.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.50 GPa
$ 1845/MT
- Density: 1.07 g/cc
- Moisture Absorption at Equilibrium: 1.1 %
- Moisture Absorption at Equilibrium: 1.9 %
- Moisture Absorption at Equilibrium: 6.7 %
- Linear Mold Shrinkage: 0.03556 cm/cm
$ 1559/MT
- Density: 1.33 g/cc
- Water Absorption: 5.9 - 6.5 %
- Moisture Absorption at Equilibrium: 1.8 - 2.2 %
- Viscosity Test: 160 cm³/g
- Linear Mold Shrinkage: 0.0050 cm/cm
$ 2201/MT
- Density: 1.67 g/cc
- Water Absorption: 4.1 - 4.7 %
- Moisture Absorption at Equilibrium: 1.0 - 1.4 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Melt Flow: 41.75 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 2104/MT
- Density: 1.18 g/cc
- Hardness, Shore A: 80
- Tensile Strength, Ultimate: 37.0 MPa
- Tensile Strength, Yield: 1.10 MPa @Strain 300 %
- Tensile Strength, Yield: 5.20 MPa @Strain 100 %
$ 1788/MT
- Density: 1.23 g/cc
- Hardness, Shore A: 89
- Hardness, Shore D: 37
- Tensile Strength: 20.0 MPa
- Tensile Strength: 35.0 MPa
$ 1630/MT
- Density: 1.53 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0044 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0124 cm/cm
$ 2547/MT
- Density: 1.48 g/cc
- Water Absorption: 0.90 %
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.6 %
- Linear Mold Shrinkage: 0.0040 cm/cm
$ 1994/MT
- Density: 1.23 g/cc
- Hardness, Shore A: 81
- Tensile Strength: 2.30 MPa
- Tensile Strength: 5.00 MPa
- Tensile Strength: 8.50 MPa
$ 1685/MT
- Bulk Density: 0.640 - 0.740 g/cc
- Density: 1.12 - 1.15 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Viscosity Measurement: 3.49 - 3.71
$ 2010/MT
- Density: 0.0300 g/cc
- Water Absorption: 0.20 %
- Water Absorption: <= 5.0 %
- Water Vapor Transmission: 80.0 - 200 g/m²/day
- Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C
$ 2007/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.37 g/cc
- Water Absorption: 4.0 - 5.0 %
- Moisture Absorption at Equilibrium: 0.60 - 1.0 %
- Viscosity Measurement: 130
$ 1631/MT
- Density: 1.06 g/cc
- Moisture Absorption at Equilibrium: 2.1 %
- Moisture Absorption at Equilibrium: 7.3 %
- Linear Mold Shrinkage: 0.04572 cm/cm
- Melt Temperature: 270 - 300 °C
$ 1838/MT
- Density: 1.21 g/cc
- Hardness, Shore A: 78
- Tensile Strength: 2.80 MPa
- Tensile Strength: 5.50 MPa
- Tensile Strength: 9.50 MPa
$ 1908/MT
- Bulk Density: 0.690 - 0.710 g/cc
- Density: 1.12 g/cc
- Water Absorption: 10.5 %
- Moisture Absorption at Equilibrium: 3.2 %
- Viscosity Measurement: 2.96 - 3.15
$ 1584/MT
- Density: 0.980 g/cc
- Linear Mold Shrinkage, Flow: 0.0085 cm/cm
- Tensile Strength, Yield: 16.0 MPa
- Elongation at Break: >= 50 %
- Tensile Modulus: 1.25 GPa
$ 2158/MT
- Density: 1.11 g/cc
- Hardness, Shore A: 88
- Hardness, Shore D: 39
- Tensile Strength: 30.0 MPa
- Tensile Strength: 45.0 MPa
$ 1974/MT
- Density: 1.44 g/cc
- Tensile Strength at Break: 97.0 MPa
- Elongation at Break: 2.7 %
- Flexural Modulus: 6.30 GPa
- Izod Impact, Notched (ISO): 5.00 kJ/m²
$ 1929/MT
- Density: 1.45 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 107 cm³/g
- Linear Mold Shrinkage, Flow: 0.0039 cm/cm
$ 1583/MT
- Density: 1.13 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.2 %
- Viscosity Test: 150 cm³/g
- Linear Mold Shrinkage: 0.010 cm/cm
$ 1960/MT
- Density: 1.08 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.15 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- High Load Melt Index: 130 g/10 min @Load 21.5 kg, Temperature 250 °C
$ 1716/MT
- Bulk Density: 0.0260 - 0.0300 g/cc
- Density: 0.0600 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 4000 µm
$ 1783/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Relative Viscosity: 2.7 cP
- Viscosity Test: 150 cm³/g
$ 1711/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.5 %
- Linear Mold Shrinkage: 0.016 cm/cm
- Tensile Strength, Yield: 83.0 MPa
$ 2023/MT
- Density: 1.13 g/cc
- Water Absorption: 9.0 - 10 %
- Moisture Absorption at Equilibrium: 2.6 - 3.4 %
- Viscosity Measurement: 150
- Linear Mold Shrinkage: 0.0065 cm/cm
$ 1543/MT
- Density: 1.09 g/cc
- Tensile Strength, Yield: 35.0 MPa
- Elongation at Break: >= 50 %
- Elongation at Yield: 20 %
- Tensile Modulus: 1.20 GPa
$ 2101/MT
- Density: 1.23 g/cc
- Hardness, Shore D: 65
- Tensile Strength: 40.0 MPa
- Tensile Strength: 40.0 MPa
- Tensile Strength: 12.0 MPa @Strain 20.0 %
$ 1705/MT
- Density: 1.20 g/cc
- Hardness, Shore A: 83
- Tensile Strength: 40.0 MPa
- Tensile Strength: 55.0 MPa
- Tensile Strength: 2.00 MPa @Strain 20.0 %
$ 1746/MT
- Density: 1.23 g/cc
- Hardness, Shore A: 96
- Hardness, Shore D: 48
- Tensile Strength, Ultimate: 42.0 MPa
- Tensile Strength, Yield: 14.0 MPa @Strain 100 %
$ 1550/MT
- Density: 1.21 g/cc
- Hardness, Shore A: 93
- Hardness, Shore D: 41
- Tensile Strength, Ultimate: 41.0 MPa
- Tensile Strength, Yield: 10.0 MPa @Strain 100 %
$ 1699/MT
- Density: 1.37 g/cc
- Water Absorption: 2.2 %
- Moisture Absorption at Equilibrium: 0.80 %
- Viscosity Test: 66 cm³/g
- Linear Mold Shrinkage, Flow: 0.0085 cm/cm
$ 1644/MT
- Density: 1.10 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.15 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- High Load Melt Index: 130 g/10 min @Load 21.6 kg, Temperature 250 °C
$ 1484/MT
- Density: 1.13 g/cc
- Hardness, Shore A: 77
- Tensile Strength: 1.00 MPa
- Tensile Strength: 4.50 MPa
- Tensile Strength: 10.0 MPa
$ 1884/MT
- Density: 1.70 g/cc
- Viscosity Measurement: 0.52
- Linear Mold Shrinkage: 0.0020 cm/cm
- Hardness, Rockwell R: 118
- Tensile Strength at Break: 170 MPa
$ 1567/MT
- Density: 0.00400 - 0.0120 g/cc @Pressure 0.1013 MPa, Temperature 20.0 °C
- Decomposition Temperature: >= 350 °C
- Color: White
- Commercial Status: Europe
- Ignition Temperature: > 580°C
$ 1703/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.10 g/cc
- Moisture Absorption at Equilibrium: 4.5 - 5.0 %
- Viscosity Measurement: 125
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
$ 2295/MT
- Density: 1.42 g/cc
- Water Absorption: 0.20 %
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 113 cm³/g
$ 1702/MT
- Density: 1.74 g/cc
- Linear Mold Shrinkage: 0.0020 cm/cm
- Tensile Strength at Break: 207 MPa
- Tensile Strength, Ultimate: 245 MPa
- Elongation at Break: 2.0 %
$ 1618/MT
- Bulk Density: 0.600 - 0.900 g/cc
- Density: 1.51 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 108
$ 1517/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1891/MT
- Density: 1.55 g/cc
- Water Absorption: 4.8 %
- Moisture Absorption at Equilibrium: 1.5 %
- Tensile Strength, Ultimate: 203 MPa
- Elongation at Break: 2.1 %
$ 1461/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Tensile Strength, Yield: 29.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.00 GPa
$ 1623/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1450/MT
- Density: 1.10 g/cc
- Water Absorption: 8.5 - 9.5 %
- Moisture Absorption at Equilibrium: 2.1 - 2.9 %
- Linear Mold Shrinkage: 0.0065 cm/cm
- Melt Flow: 121 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 2588/MT
- Viscosity Measurement: 320 - 400 @Temperature 120 °C
- Molecular Weight: 1700 g/mol
- Molecular Weight: 4000 g/mol
- Melting Point: 99.0 - 108 °C
- Dropping Point: 108 - 111 °C
$ 1602/MT
- Density: 1.38 g/cc
- Hardness, Shore D: 70
- Tensile Strength: 70.0 MPa
- Elongation at Break: 15 %
- Charpy Impact Unnotched: 9.00 J/cm² @Temperature -30.0 °C
$ 1468/MT
- Density: 1.49 g/cc
- Moisture Absorption at Equilibrium: 0.90 %
- Moisture Absorption at Equilibrium: 1.5 %
- Moisture Absorption at Equilibrium: 5.2 %
- Tensile Strength at Break: 195 MPa
$ 1588/MT
- Density: 1.22 g/cc
- Water Absorption: 7.2 - 7.8 %
- Moisture Absorption at Equilibrium: 2.1 - 2.7 %
- Viscosity Measurement: 160
- Linear Mold Shrinkage: 0.0050 cm/cm
$ 1612/MT
- Bulk Density: 0.700 - 0.800 g/cc
- Density: 1.37 g/cc
- Water Absorption: 2.2 %
- Moisture Absorption at Equilibrium: 0.80 %
- Viscosity Measurement: 56
$ 1787/MT
- Density: 1.43 g/cc
- Water Absorption: 4.3 - 5.3 %
- Moisture Absorption at Equilibrium: 0.80 - 1.2 %
- Viscosity Measurement: 130
- Linear Mold Shrinkage: 0.0033 cm/cm
$ 2408/MT
- Density: 1.15 g/cc
- Hardness, Shore A: 89
- Tensile Strength: 4.80 MPa
- Tensile Strength: 7.60 MPa
- Tensile Strength: 16.5 MPa
$ 1994/MT
- Bulk Density: 0.0500 - 0.0600 g/cc
- Density: 0.0600 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1500/MT
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.021 cm/cm
$ 1565/MT
- Bulk Density: 0.0390 - 0.0400 g/cc
- Density: >= 0.900 g/cc
- Commercial Status: North America
- Stabilization: 50 sec
- Steam time: 3 - 5 sec
$ 1714/MT
- Density: 1.12 - 1.15 g/cc
- Water Vapor Transmission: 25.0 g/m²/day
- Oxygen Transmission Rate: 14.0 cc/m²/day
- Tensile Strength at Break: 70.0 MPa
- Tensile Strength at Break: 70.0 MPa
$ 2178/MT
- Density: 1.22 g/cc
- Water Absorption: 7.5 %
- Moisture Absorption at Equilibrium: 2.4 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Melt Flow: 30 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 1465/MT
- Density: 1.50 g/cc
- Water Absorption: 5.1 %
- Moisture Absorption at Equilibrium: 1.5 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Tensile Strength, Ultimate: 100 MPa
$ 1502/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.35 g/cc
- Water Absorption: 5.0 - 6.0 %
- Moisture Absorption at Equilibrium: 1.1 - 1.5 %
- Viscosity Measurement: 130
$ 1627/MT
- Bulk Density: 0.700 - 0.800 g/cc
- Density: 1.37 g/cc
- Water Absorption: 2.2 %
- Moisture Absorption at Equilibrium: 0.80 %
- Viscosity Measurement: 56
$ 1704/MT
- Density: 1.37 g/cc
- Moisture Absorption at Equilibrium: >= 0.80 %
- Moisture Absorption at Equilibrium: >= 4.5 %
- Tensile Strength at Break: 145 MPa @Temperature 23.0 °C
- Tensile Strength at Break: 235 MPa @Temperature -40.0 °C
$ 1452/MT
- Density: 1.43 g/cc
- Water Absorption: 4.3 - 5.3 %
- Moisture Absorption at Equilibrium: 0.80 - 1.2 %
- Viscosity Measurement: 130
- Linear Mold Shrinkage: 0.0033 cm/cm
$ 1658/MT
- Density: 1.13 g/cc
- Moisture Absorption at Equilibrium: 1.3 %
- Moisture Absorption at Equilibrium: 2.7 %
- Moisture Absorption at Equilibrium: 9.5 %
- Linear Mold Shrinkage: 0.0508 cm/cm
$ 1537/MT
- Moisture Absorption at Equilibrium: 1.0 %
- Viscosity Test: 82 cm³/g
- Tensile Strength at Break: 90.0 MPa
- Tensile Strength, Yield: 90.0 MPa
- Elongation at Break: 6.7 %
$ 1676/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.56 g/cc
- Water Absorption: 3.7 - 4.3 %
- Moisture Absorption at Equilibrium: 1.0 - 1.4 %
- Viscosity Measurement: 130
$ 1455/MT
- Bulk Density: 0.600 - 0.900 g/cc
- Density: 1.30 g/cc
- Viscosity Measurement: 115
- Linear Mold Shrinkage, Flow: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.019 cm/cm
$ 2209/MT
- Density: 1.09 g/cc
- Water Absorption: 8.1 %
- Moisture Absorption at Equilibrium: 2.3 %
- Melting Point: 220 °C
- Deflection Temperature at 1.8 MPa (264 psi): 56.0 °C
$ 2094/MT
- Bulk Density: 0.0160 - 0.0300 g/cc
- Bead Size: 0.810 - 0.980 mm
- Moisture Content: <= 1.0 %
- Commercial Status: North America
- Sieve Analysis: <0.59 mm
$ 1843/MT
- Density: 1.26 g/cc
- Hardness, Shore D: 75
- Tensile Strength: 40.0 MPa
- Tensile Strength: 25.0 MPa @Strain 20.0 %
- Tensile Strength: 30.0 MPa @Strain 100 %
$ 1484/MT
- Density: 1.16 g/cc
- Water Absorption: 8.0 - 9.0 %
- Moisture Absorption at Equilibrium: 2.6 - 3.2 %
- Viscosity Test: 150 cm³/g
- Linear Mold Shrinkage: 0.0080 cm/cm
$ 1511/MT
- Density: 1.49 g/cc
- Water Absorption: 1.1 %
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.6 %
- Linear Mold Shrinkage: 0.0090 cm/cm
$ 1517/MT
- Density: 1.23 g/cc
- Water Absorption: 6.7 - 7.3 %
- Moisture Absorption at Equilibrium: 1.9 - 2.5 %
- Viscosity Measurement: 145
- Linear Mold Shrinkage: 0.0075 cm/cm
$ 2548/MT
- Density: 1.24 g/cc
- Hardness, Shore A: 93
- Hardness, Shore D: 41
- Tensile Strength: 55.0 MPa
- Tensile Strength: 5.00 MPa @Strain 20.0 %
$ 1529/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0045 cm/cm
- Melt Flow: 1.2 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1566/MT
- Density: 1.27 g/cc
- Hardness, Shore D: 50
- Tensile Strength: 30.0 MPa
- Elongation at Break: 65 %
- Charpy Impact Unnotched: 16.0 J/cm² @Temperature -30.0 °C
$ 1694/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.36 g/cc
- Water Absorption: 6.3 - 6.9 %
- Moisture Absorption at Equilibrium: 1.9 - 2.3 %
- Viscosity Measurement: 140
$ 1696/MT
- Bulk Density: 0.640 g/cc
- Density: 0.0180 - 0.800 g/cc
- Bead Size: 0.600 - 1.20 mm
- Moisture Content: <= 1.2 %
- Commercial Status: North America
- Pentane Content: 3.75 - 3.95%
$ 1883/MT
- Bulk Density: 0.600 - 0.900 g/cc
- Density: 1.53 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 102
$ 1651/MT
- Density: 1.56 g/cc
- Viscosity Test: 87 cm³/g
- Melt Flow: 50 g/10 min @Load 2.16 kg, Temperature 275 °C
- Tensile Strength, Ultimate: 135 MPa
- Elongation at Break: 1.8 %
$ 1648/MT
- Density: 1.39 g/cc
- Water Absorption: 1.1 %
- Water Absorption: 6.4 %
- Moisture Absorption at Equilibrium: 1.8 %
- Relative Viscosity: 2.6 cP
$ 1559/MT
- Density: 1.52 g/cc
- Viscosity Test: 92 cm³/g
- Tensile Strength, Ultimate: 140 MPa
- Elongation at Break: 3.2 %
- Flexural Strength: 212 MPa
$ 1587/MT
- Density: 1.06 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- High Load Melt Index: 65 g/10 min @Load 21.6 kg, Temperature 250 °C
$ 1686/MT
- Density: 1.08 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.15 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- High Load Melt Index: 8.0 g/10 min @Load 21.6 kg, Temperature 250 °C
$ 2430/MT
- Bulk Density: 0.0130 - 0.0170 g/cc
- Density: 0.0300 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 6000 µm
$ 1486/MT
- Density: 1.08 g/cc
- Water Absorption: 3.6 %
- Moisture Absorption at Equilibrium: 1.4 %
- Viscosity Measurement: 150
- Linear Mold Shrinkage: 0.011 - 0.012 cm/cm
$ 2228/MT
- Density: 1.45 g/cc
- Linear Mold Shrinkage: 0.0020 cm/cm
- Tensile Strength, Ultimate: 190 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 11.0 GPa
$ 2252/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0045 cm/cm
- Melt Flow: 3.0 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1669/MT
- Density: 1.37 g/cc
- Water Absorption: 2.2 %
- Moisture Absorption at Equilibrium: 0.80 %
- Viscosity Test: 56 cm³/g
- Linear Mold Shrinkage, Flow: 0.0082 cm/cm
$ 1454/MT
- Density: 1.07 g/cc
- Moisture Absorption at Equilibrium: 1.1 %
- Moisture Absorption at Equilibrium: 1.9 %
- Moisture Absorption at Equilibrium: 6.7 %
- Linear Mold Shrinkage: 0.03556 cm/cm
$ 1836/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 1.00 - 2.30 mm
- Softening Point: 70.0 °C
$ 1518/MT
- Bulk Density: 0.640 - 0.740 g/cc
- Density: 1.12 - 1.15 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Viscosity Measurement: 2.19 - 3.41
$ 1560/MT
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 8.8 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 130 MPa @Load 36.5 kg, Time 30.0 sec
$ 2231/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.41 g/cc
- Water Absorption: 5.9 - 6.5 %
- Moisture Absorption at Equilibrium: >= 2.0 %
- Moisture Absorption at Equilibrium: 1.8 - 2.2 %
$ 2130/MT
- Density: 1.12 g/cc
- Water Absorption: 10.5 %
- Moisture Absorption at Equilibrium: 3.2 %
- Relative Viscosity: 4.0 cP
- Viscosity Test: 250 cm³/g
$ 2517/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.55 g/cc
- Water Absorption: 3.7 - 4.3 %
- Moisture Absorption at Equilibrium: 1.0 - 1.4 %
- Viscosity Measurement: 140
$ 1638/MT
- Density: 1.26 g/cc
- Hardness, Shore D: 64
- Tensile Strength: 45.0 MPa
- Tensile Strength: 22.0 MPa @Strain 20.0 %
- Tensile Strength: 23.0 MPa @Strain 100 %
$ 1520/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1969/MT
- Density: 1.47 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 104
- Viscosity Measurement: 70 @Temperature 290 °C
$ 1750/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.24 g/cc
- Water Absorption: 7.7 - 8.3 %
- Moisture Absorption at Equilibrium: 2.3 - 2.9 %
- Moisture Absorption at Equilibrium: 2.6 %
$ 1884/MT
- Density: 1.75 g/cc
- Tensile Strength at Break: 248 MPa
- Elongation at Break: 2.2 %
- Tensile Modulus: 20.2 GPa
- Flexural Strength: 383 MPa
$ 1877/MT
- Density: 1.19 g/cc
- Hardness, Shore A: 85
- Tensile Strength, Ultimate: 39.0 MPa
- Tensile Strength, Yield: 1.30 MPa @Strain 300 %
- Tensile Strength, Yield: 6.60 MPa @Strain 100 %
$ 1675/MT
- Density: 1.24 g/cc
- Linear Mold Shrinkage, Flow: 0.010 cm/cm
- Tensile Strength, Yield: 34.0 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 4.50 GPa
$ 2090/MT
- Density: 1.27 g/cc
- Hardness, Shore A: 88
- Tensile Strength, Ultimate: 33.0 MPa
- Tensile Strength, Yield: 7.00 MPa @Strain 100 %
- Tensile Strength, Yield: 15.5 MPa @Strain 300 %
$ 1654/MT
- Density: 1.53 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 87 cm³/g
- Linear Mold Shrinkage, Flow: 0.0036 cm/cm
$ 1706/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1591/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.10 g/cc
- Moisture Absorption at Equilibrium: 4.5 - 5.0 %
- Viscosity Measurement: 125
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
$ 1529/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.56 g/cc
- Water Absorption: 3.7 - 4.3 %
- Moisture Absorption at Equilibrium: 1.0 - 1.4 %
- Viscosity Measurement: 130
$ 1545/MT
- Density: 1.22 g/cc
- Water Absorption: 7.5 %
- Moisture Absorption at Equilibrium: 2.4 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Melt Flow: 30 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 1596/MT
- Density: 1.58 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Tensile Strength at Break: 132 MPa
- Tensile Strength, Ultimate: 130 MPa
$ 1448/MT
- Density: 1.36 g/cc
- Water Absorption: 6.3 - 6.9 %
- Moisture Absorption at Equilibrium: 1.9 - 2.3 %
- Viscosity Test: 140 cm³/g
- Linear Mold Shrinkage: 0.0035 cm/cm
$ 1706/MT
- Density: 1.13 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.2 %
- Relative Viscosity: 3.5 cP
- Viscosity Test: 205 cm³/g
$ 1809/MT
- Density: 1.41 g/cc
- Water Absorption: 4.9 %
- Moisture Absorption at Equilibrium: 1.4 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Hardness, Rockwell R: 119
$ 1502/MT
- Bulk Density: 0.0260 - 0.0300 g/cc
- Density: 0.0700 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 4000 µm
$ 2196/MT
- Density: 1.12 g/cc
- Water Absorption: 10.5 %
- Moisture Absorption at Equilibrium: 3.2 %
- Relative Viscosity: 4.0 cP
- Viscosity Test: 250 cm³/g
$ 1798/MT
- Bulk Density: 0.600 - 0.900 g/cc
- Density: 1.37 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 115
$ 1780/MT
- Density: 1.21 g/cc
- Hardness, Shore A: 96
- Hardness, Shore D: 46
- Tensile Strength, Ultimate: 40.0 MPa
- Tensile Strength, Yield: 13.0 MPa @Strain 100 %
$ 1670/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 4.7 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2110/MT
- Density: 0.9978 g/cc
- Molecular Weight: 2000 g/mol
- Melting Point: -29.0 °C
- Boiling Point: >= 250 °C
- Flash Point: >= 234 °C
$ 1656/MT
- Density: 1.12 g/cc
- Water Absorption: 10.5 %
- Moisture Absorption at Equilibrium: 3.2 %
- Relative Viscosity: 4.0 cP
- Viscosity Test: 250 cm³/g
$ 2342/MT
- Density: 0.0350 g/cc
- Water Absorption: 0.20 %
- Water Absorption: <= 3.0 %
- Water Vapor Transmission: 80.0 - 150 g/m²/day
- Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C
$ 1716/MT
- Bulk Density: 0.0120 - 0.0300 g/cc
- Bead Size: 1.02 - 1.30 mm
- Moisture Content: <= 1.0 %
- Commercial Status: North America
- Sieve Analysis: <0.84 mm
$ 1782/MT
- Density: 1.21 g/cc
- Hardness, Shore A: 91
- Hardness, Shore D: 42
- Tensile Strength: 40.0 MPa
- Tensile Strength: 55.0 MPa
$ 1627/MT
- Bulk Density: 0.700 - 0.800 g/cc
- Density: 1.33 g/cc
- Water Absorption: 1.7 %
- Moisture Absorption at Equilibrium: 0.50 %
- Viscosity Measurement: 56
$ 1469/MT
- Density: 1.36 g/cc
- Water Absorption: 6.3 - 6.9 %
- Moisture Absorption at Equilibrium: 1.9 - 2.3 %
- Viscosity Measurement: 140
- Linear Mold Shrinkage: 0.0035 cm/cm
$ 2038/MT
- Density: 1.22 g/cc
- Hardness, Shore A: 61
- Tensile Strength: 50.0 MPa
- Tensile Strength: 2.00 MPa @Strain 20.0 %
- Tensile Strength: 4.00 MPa @Strain 100 %
$ 1935/MT
- Density: 1.51 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 108
- Linear Mold Shrinkage, Flow: 0.0045 cm/cm
$ 1946/MT
- Density: 1.09 g/cc
- Water Absorption: 1.5 %
- Water Absorption: 8.1 %
- Moisture Absorption at Equilibrium: 2.3 %
- Linear Mold Shrinkage: 0.012 cm/cm
$ 2010/MT
- Density: 1.35 g/cc
- Hardness, Shore D: 64
- Tensile Strength: 65.0 MPa
- Elongation at Break: 20 %
- Modulus of Elasticity: 1.90 GPa
$ 1451/MT
- Density: 1.36 g/cc
- Water Absorption: 6.3 - 6.9 %
- Moisture Absorption at Equilibrium: 1.9 - 2.3 %
- Viscosity Test: 140 cm³/g
- Linear Mold Shrinkage: 0.0035 cm/cm
$ 1773/MT
- Bulk Density: 0.890 g/cc
- Density: 1.40 g/cc
- Melt Flow: 35 g/10 min @Load 10.0 kg, Temperature 190 °C
- Melting Point: 165 °C
- Decomposition Temperature: >= 240 °C
$ 1779/MT
- Density: 1.55 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 101
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
$ 1848/MT
- Density: 1.35 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 8.1 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 80.0 MPa @Load 36.5 kg, Time 30.0 sec
$ 1622/MT
- Bulk Density: 0.650 - 0.900 g/cc
- Density: 1.42 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.021 cm/cm
$ 1796/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 4.3 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 35.0 MPa
$ 2100/MT
- Density: 1.21 g/cc
- Hardness, Shore A: 78
- Tensile Strength, Ultimate: 31.0 MPa
- Tensile Strength, Yield: 4.80 MPa @Strain 100 %
- Tensile Strength, Yield: 8.30 MPa @Strain 300 %
$ 2323/MT
- Density: 1.354 g/cc
- Water Absorption: 1.8 - 2.4 %
- Moisture Absorption at Equilibrium: 0.70 - 1.1 %
- Viscosity Measurement: 150
- Linear Mold Shrinkage: 0.0040 cm/cm
$ 2287/MT
- Bulk Density: 0.0290 - 0.0350 g/cc
- Density: 0.0700 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1643/MT
- Density: 1.39 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 104
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
$ 2047/MT
- Bulk Density: 0.0290 - 0.0350 g/cc
- Density: 0.0600 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1819/MT
- Bulk Density: 0.600 - 0.900 g/cc
- Density: 1.41 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 100
$ 1539/MT
- Bulk Density: 0.0260 - 0.0300 g/cc
- Density: 0.0700 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 4000 µm
$ 1776/MT
- Density: 1.37 g/cc
- Hardness, Shore D: 67
- Tensile Strength: 65.0 MPa
- Tensile Strength: 35.0 MPa @Strain 5.00 %, Temperature 60.0 °C
- Tensile Strength: 40.0 MPa @Strain 5.00 %, Temperature 40.0 °C
$ 1831/MT
- Density: 1.13 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.8 %
- Relative Viscosity: 2.73 cP
- Viscosity Test: 151 cm³/g
$ 1574/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 35.0 MPa
$ 2463/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 31 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2404/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.7 %
- Relative Viscosity: 2.6 cP
$ 1690/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2287/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 230 °C
- CTE, linear, Parallel to Flow: 185 µm/m-°C @Temperature 20.0 °C
$ 2323/MT
- Density: 0.970 g/cc
- Linear Mold Shrinkage, Flow: 0.0085 cm/cm
- Tensile Strength, Yield: 16.0 MPa
- Elongation at Break: >= 50 %
- Tensile Modulus: 1.15 GPa
$ 2330/MT
- Density: 1.24 g/cc
- Hardness, Shore A: 96
- Hardness, Shore D: 48
- Tensile Strength: 50.0 MPa
- Tensile Strength: 8.00 MPa @Strain 20.0 %
$ 1503/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 2.4 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1446/MT
- Density: 1.36 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 100
- Linear Mold Shrinkage, Flow: 0.017 cm/cm
$ 1490/MT
- Water Vapor Transmission: 135 g/m²/day
- Oxygen Transmission Rate: 1200 cc/m²/day
- Thickness: 10.0 - 120 microns
- Dart Drop Total Energy: 240 J/cm
- Commercial Status: Europe
$ 1570/MT
- Density: 1.25 - 1.27 g/cc
- Moisture Vapor Transmission: 140 cc-mm/m²-24hr-atm
- Oxygen Transmission Rate: 1600 cc/m²/day
- Melt Flow: 2.7 - 4.9 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Elongation at Yield, MD: 560 %
$ 1726/MT
- Density: 1.34 g/cc
- Water Absorption: 6.3 - 6.9 %
- Moisture Absorption at Equilibrium: 1.9 - 2.3 %
- Viscosity Test: 140 cm³/g
- Linear Mold Shrinkage: 0.0050 cm/cm
$ 1731/MT
- Density: 1.68 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 98 cm³/g
- Melt Flow: 22 g/10 min @Load 2.16 kg, Temperature 275 °C
$ 2046/MT
- Density: 1.23 g/cc
- Water Absorption: 1.4 %
- Water Absorption: 8.1 %
- Moisture Absorption at Equilibrium: 2.3 %
- Relative Viscosity: 2.6 cP
$ 1512/MT
- Bulk Density: 0.650 - 0.900 g/cc
- Density: 1.48 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.017 cm/cm
$ 2096/MT
- Density: 1.36 g/cc
- Water Absorption: 5.2 - 5.8 %
- Moisture Absorption at Equilibrium: 1.5 - 1.9 %
- Viscosity Test: 145 cm³/g
- Linear Mold Shrinkage: 0.0055 cm/cm
$ 2286/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Relative Viscosity: 3.6 cP
- Viscosity Test: 218 cm³/g
$ 2166/MT
- Density: 1.22 g/cc
- Hardness, Shore D: 50
- Tensile Strength: 40.0 MPa
- Tensile Strength: 50.0 MPa
- Tensile Strength: 6.00 MPa @Strain 20.0 %
$ 2078/MT
- Density: 1.65 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 105 cm³/g
- Tensile Strength at Break: 154 MPa
$ 2271/MT
- Density: 0.0330 g/cc
- Water Absorption: 0.20 %
- Water Absorption: <= 3.0 %
- Water Vapor Transmission: 50.0 - 150 g/m²/day
- Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C
$ 1622/MT
- Bulk Density: 0.0390 - 0.0400 g/cc
- Density: >= 1.00 g/cc
- Commercial Status: North America
- Stabilization: 40 sec
- Steam time: 3 - 7 sec
$ 1673/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.32 g/cc
- Water Absorption: 6.8 - 7.4 %
- Moisture Absorption at Equilibrium: 2.1 - 2.5 %
- Moisture Absorption at Equilibrium: 2.3 %
$ 2173/MT
- Density: 1.27 g/cc
- Hardness, Shore A: 84
- Tensile Strength, Ultimate: 35.9 MPa
- Tensile Strength, Yield: 8.50 MPa @Strain 100 %
- Tensile Strength, Yield: 19.7 MPa @Strain 300 %
$ 2125/MT
- Density: 1.54 g/cc
- Viscosity Test: 89 cm³/g
- Melt Flow: 27 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength, Ultimate: 140 MPa
- Elongation at Break: 2.5 %
$ 2060/MT
- Density: 1.11 g/cc
- Hardness, Shore A: 80
- Tensile Strength, Ultimate: 32.0 MPa
- Tensile Strength, Yield: 5.50 MPa @Strain 100 %
- Tensile Strength, Yield: 10.0 MPa @Strain 300 %
$ 1458/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0055 cm/cm
- Melt Flow: 12 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1623/MT
- Density: 1.23 g/cc
- Hardness, Shore D: 57
- Tensile Strength: 43.0 MPa
- Tensile Strength: 50.0 MPa
- Tensile Strength: 12.0 MPa @Strain 20.0 %
$ 1521/MT
- Density: 1.424 g/cc
- Density: 1.61 g/cc
- Viscosity Measurement: 0.55
- Linear Mold Shrinkage: 0.0030 cm/cm
- Hardness, Rockwell R: 118
$ 1550/MT
- Density: 1.36 g/cc
- Water Absorption: 5.9 - 6.5 %
- Moisture Absorption at Equilibrium: 2.2 - 2.6 %
- Viscosity Measurement: 145
- Linear Mold Shrinkage: 0.0075 cm/cm
$ 1487/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.36 g/cc
- Water Absorption: 5.9 - 6.5 %
- Moisture Absorption at Equilibrium: 2.2 - 2.6 %
- Viscosity Measurement: 145
$ 1466/MT
- Density: 1.13 g/cc
- Moisture Absorption at Equilibrium: 1.6 %
- Moisture Absorption at Equilibrium: 2.6 %
- Moisture Absorption at Equilibrium: 9.2 %
- Hardness, Rockwell R: 99
$ 1493/MT
- Density: 1.24 g/cc
- Hardness, Shore D: 73
- Tensile Strength, Ultimate: 40.0 MPa
- Tensile Strength, Yield: 36.0 MPa @Strain 100 %
- Tensile Strength, Yield: 37.0 MPa @Strain 300 %
$ 1699/MT
- Water Absorption: 1.3 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Hardness, Rockwell R: 119
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 2.5 %
$ 2202/MT
- Density: 1.45 g/cc
- Water Absorption: 4.4 - 5.0 %
- Moisture Absorption at Equilibrium: 1.0 - 1.4 %
- Viscosity Test: 140 cm³/g
- Linear Mold Shrinkage: 0.0045 cm/cm
$ 1534/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Tensile Strength, Ultimate: 70.0 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 4.70 GPa
$ 1969/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.32 g/cc
- Water Absorption: 6.8 - 7.4 %
- Moisture Absorption at Equilibrium: 2.1 - 2.5 %
- Viscosity Measurement: 140
$ 2071/MT
- Bulk Density: 0.650 - 0.850 g/cc
- Density: 1.37 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.019 cm/cm
$ 1706/MT
- Density: 1.19 g/cc @Thickness 2.00 mm
- Hardness, Shore A: 85 @Thickness 2.00 mm
- Tensile Strength, Ultimate: 67.0 MPa @Thickness 2.00 mm
- Tensile Strength, Yield: 6.00 MPa @Strain 100 %
- Tensile Strength, Yield: 15.0 MPa @Strain 300 %, Thickness 0.760 mm
$ 1653/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.5 %
- Linear Mold Shrinkage: 0.016 cm/cm
- Tensile Strength, Yield: 54.0 MPa
$ 2099/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.5 %
- Linear Mold Shrinkage: 0.016 cm/cm
- Tensile Strength, Yield: 54.0 MPa
$ 2299/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.5 %
- Linear Mold Shrinkage: 0.016 cm/cm
- Tensile Strength, Yield: 90.0 MPa
$ 1877/MT
- Density: 1.23 g/cc
- Water Absorption: 7.4 %
- Moisture Absorption at Equilibrium: 2.2 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Tensile Strength, Ultimate: 90.0 MPa
$ 2387/MT
- Density: 1.23 g/cc
- Water Absorption: 7.4 %
- Moisture Absorption at Equilibrium: 2.2 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Tensile Strength at Break: 117 MPa
$ 1675/MT
- Density: 1.23 g/cc
- Water Absorption: 7.4 %
- Moisture Absorption at Equilibrium: 2.2 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Tensile Strength, Ultimate: 90.0 MPa
$ 2057/MT
- Density: 1.23 g/cc
- Water Absorption: 7.4 %
- Moisture Absorption at Equilibrium: 2.2 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Tensile Strength at Break: 117 MPa
$ 1882/MT
- Density: 1.40 g/cc
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.7 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 144 MPa
$ 2392/MT
- Density: 1.33 g/cc
- Water Absorption: 6.4 %
- Moisture Absorption at Equilibrium: 1.9 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength at Break: 172 MPa
$ 1620/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.10 g/cc
- Ball Indentation Hardness: 115 MPa
- Tensile Strength, Yield: 80.0 MPa
- Elongation at Yield: 5.0 %
$ 1606/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.10 g/cc
- Ball Indentation Hardness: 115 MPa
- Tensile Modulus: 2.40 GPa
- Flexural Strength: 100 MPa
$ 2240/MT
- Density: 1.35 g/cc
- Tensile Strength at Break: 135 MPa
- Elongation at Break: 2.5 %
- Flexural Modulus: 7.50 GPa
- Izod Impact, Notched (ISO): 7.30 kJ/m²
$ 2361/MT
- Density: 1.35 g/cc
- Tensile Strength at Break: 145 MPa
- Elongation at Break: 2.4 %
- Flexural Modulus: 7.90 GPa
- Izod Impact, Notched (ISO): 7.70 kJ/m²
$ 2050/MT
- Density: 1.45 g/cc
- Tensile Strength at Break: 175 MPa
- Elongation at Break: 2.7 %
- Tensile Modulus: 11.3 GPa
- Flexural Modulus: 10.7 GPa
$ 1736/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- Tensile Strength, Ultimate: 86.0 MPa
- Elongation at Break: 10 %
- Tensile Modulus: 4.00 GPa
$ 1826/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- Tensile Strength at Break: 90.0 MPa
- Tensile Strength, Ultimate: 110 MPa
- Elongation at Break: 6.0 %
$ 1586/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage: 0.0040 cm/cm
- Tensile Strength, Ultimate: 132 MPa
- Elongation at Break: 5.0 %
- Tensile Modulus: 8.25 GPa
$ 1880/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage: 0.0040 cm/cm
- Tensile Strength at Break: 125 MPa
- Tensile Strength, Ultimate: 145 MPa
- Elongation at Break: 5.0 %
$ 2083/MT
- Density: 1.13 g/cc
- Moisture Absorption at Equilibrium: 1.6 %
- Moisture Absorption at Equilibrium: 2.7 %
- Moisture Absorption at Equilibrium: 9.5 %
- Tensile Strength, Yield: 39.0 MPa
$ 1945/MT
- Density: 1.13 g/cc
- Moisture Absorption at Equilibrium: 1.6 %
- Moisture Absorption at Equilibrium: 2.7 %
- Moisture Absorption at Equilibrium: 9.5 %
- Tensile Strength, Yield: 80.0 MPa
$ 1481/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.7 %
- Relative Viscosity: 2.6 cP
$ 2331/MT
- Density: 0.932 g/cc
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.7 %
$ 1640/MT
- Density: 0.932 g/cc
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.7 %
$ 2485/MT
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 1.6 %
- Moisture Absorption at Equilibrium: 2.7 %
- Moisture Absorption at Equilibrium: 9.5 %
- Linear Mold Shrinkage: 0.0305 cm/cm
$ 1473/MT
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 1.6 %
- Moisture Absorption at Equilibrium: 2.7 %
- Moisture Absorption at Equilibrium: 9.5 %
- Linear Mold Shrinkage: 0.0305 cm/cm
$ 1824/MT
- Density: 0.932 g/cc
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.7 %
$ 1667/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 9.3 %
- Moisture Absorption at Equilibrium: 2.6 %
- Relative Viscosity: 2.6 cP
$ 1552/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 9.3 %
- Moisture Absorption at Equilibrium: 2.6 %
- Relative Viscosity: 2.6 cP
$ 1611/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 9.3 %
- Moisture Absorption at Equilibrium: 2.6 %
- Relative Viscosity: 2.6 cP
$ 1565/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 9.3 %
- Moisture Absorption at Equilibrium: 2.6 %
- Relative Viscosity: 2.6 cP
$ 1517/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 9.2 %
- Moisture Absorption at Equilibrium: 2.6 %
- Relative Viscosity: 2.6 cP
$ 1674/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 9.2 %
- Moisture Absorption at Equilibrium: 2.6 %
- Relative Viscosity: 2.6 cP
$ 1506/MT
- Density: 1.067 g/cc
- Density: 1.23 g/cc
- Water Absorption: 1.4 %
- Water Absorption: 8.1 %
- Moisture Absorption at Equilibrium: 2.3 %
$ 1919/MT
- Density: 1.067 g/cc
- Density: 1.23 g/cc
- Water Absorption: 1.4 %
- Water Absorption: 8.1 %
- Moisture Absorption at Equilibrium: 2.3 %
$ 1531/MT
- Density: 1.23 g/cc
- Water Absorption: 1.4 %
- Water Absorption: 8.1 %
- Moisture Absorption at Equilibrium: 2.3 %
- Relative Viscosity: 2.6 cP
$ 1791/MT
- Density: 1.23 g/cc
- Water Absorption: 1.4 %
- Water Absorption: 8.1 %
- Moisture Absorption at Equilibrium: 2.3 %
- Viscosity Measurement: 50
$ 2277/MT
- Density: 1.62 g/cc
- Moisture Absorption at Equilibrium: 0.90 %
- Moisture Absorption at Equilibrium: 1.1 %
- Moisture Absorption at Equilibrium: 4.0 %
- Linear Mold Shrinkage: 0.00762 cm/cm
$ 2054/MT
- Density: 1.62 g/cc
- Water Absorption: 4.0 %
- Moisture Absorption at Equilibrium: 1.1 %
- Viscosity Measurement: 50
- Linear Mold Shrinkage: 0.0030 cm/cm
$ 1554/MT
- Density: 1.136 g/cc
- Density: 1.39 g/cc
- Water Absorption: 1.1 %
- Water Absorption: 6.4 %
- Moisture Absorption at Equilibrium: 1.8 %
$ 1914/MT
- Density: 1.65 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 108
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
$ 2478/MT
- Density: 1.68 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 105 cm³/g
- Linear Mold Shrinkage: 0.0030 cm/cm
$ 1503/MT
- Water Absorption: 1.5 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Tensile Strength at Break: 70.0 MPa @Temperature -40.0 °C
- Tensile Strength at Break: 70.0 MPa @Temperature -40.0 °C
- Tensile Strength, Yield: 32.0 MPa
$ 1637/MT
- Density: 1.13 g/cc
- Water Absorption: 9.0 - 10 %
- Moisture Absorption at Equilibrium: 2.6 - 3.4 %
- Viscosity Measurement: 150
- Linear Mold Shrinkage: 0.0065 cm/cm
$ 2451/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.13 g/cc
- Water Absorption: 8.0 - 9.0 %
- Moisture Absorption at Equilibrium: 2.5 - 3.1 %
- Viscosity Measurement: 190
$ 1841/MT
- Density: 1.36 g/cc
- Water Absorption: 1.1 %
- Linear Mold Shrinkage, Flow: 0.023 cm/cm
- Linear Mold Shrinkage, Transverse: 0.059 cm/cm
- Tensile Strength, Ultimate: 170 MPa
$ 2185/MT
- Density: 1.18 g/cc
- Hardness, Shore A: 80
- Tensile Strength: 35.0 MPa
- Tensile Strength: 50.0 MPa
- Tensile Strength: 2.00 MPa @Strain 20.0 %
$ 1526/MT
- Density: 1.08 g/cc
- Water Absorption: 3.6 %
- Moisture Absorption at Equilibrium: 1.4 %
- Viscosity Measurement: 150
- Linear Mold Shrinkage: 0.011 - 0.012 cm/cm
$ 1532/MT
- Density: 1.07 g/cc
- Water Absorption: 1.1 %
- Water Absorption: 6.7 %
- Moisture Absorption at Equilibrium: 1.9 %
- Linear Mold Shrinkage: 0.014 cm/cm
$ 1644/MT
- Moisture Absorption at Equilibrium: 1.0 %
- Viscosity Test: 56 cm³/g
- Tensile Strength at Break: 90.0 MPa
- Tensile Strength, Yield: 90.0 MPa
- Elongation at Break: 6.7 %
$ 2310/MT
- Density: 1.46 g/cc
- Viscosity Measurement: 150
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 21.9 g/10 min @Load 5.00 kg, Temperature 275 °C
- Tensile Strength, Yield: 130 MPa
$ 1492/MT
- Density: 1.45 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.25 %
- Viscosity Measurement: 123
- Viscosity Measurement: 70 @Temperature 290 °C
$ 1663/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.35 g/cc
- Water Absorption: 5.0 - 6.0 %
- Moisture Absorption at Equilibrium: >= 1.3 %
- Moisture Absorption at Equilibrium: 1.1 - 1.5 %
$ 2423/MT
- Density: 1.17 g/cc
- Hardness, Shore D: 60
- Tensile Strength, Ultimate: 40.0 MPa
- Tensile Strength, Yield: 22.0 MPa @Strain 100 %
- Tensile Strength, Yield: 33.0 MPa @Strain 300 %
$ 1636/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- CTE, linear, Parallel to Flow: 135 µm/m-°C @Temperature 20.0 °C
$ 1572/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.0135 cm/cm
- Tensile Strength, Yield: 31.0 MPa
- Elongation at Break: 25 %
- Tensile Modulus: 2.30 GPa
$ 2028/MT
- Density: 1.06 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- High Load Melt Index: 30 g/10 min @Load 21.6 kg, Temperature 250 °C
$ 1581/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.38 g/cc
- Water Absorption: 5.0 - 6.0 %
- Moisture Absorption at Equilibrium: 1.1 - 1.5 %
- Viscosity Measurement: 130
$ 1702/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0055 cm/cm
- Melt Flow: 6.0 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 2233/MT
- Density: 1.45 g/cc
- Water Absorption: 0.20 %
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 110 cm³/g
$ 1459/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.62 g/cc
- Water Absorption: 3.5 - 4.5 %
- Moisture Absorption at Equilibrium: 0.40 - 0.80 %
- Viscosity Measurement: 135
$ 1620/MT
- Density: 1.13 g/cc
- Moisture Absorption at Equilibrium: 1.6 %
- Moisture Absorption at Equilibrium: 2.6 %
- Moisture Absorption at Equilibrium: 9.2 %
- Tensile Strength, Yield: 46.0 MPa @Temperature 23.0 °C
$ 1690/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1929/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2259/MT
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 2.5 %
- Moisture Absorption at Equilibrium: 8.5 %
- Tensile Strength, Yield: 54.0 MPa
- Elongation at Break: >= 50 %
$ 1920/MT
- Density: 1.41 g/cc
- Water Absorption: 4.7 - 5.3 %
- Moisture Absorption at Equilibrium: 1.4 - 1.8 %
- Viscosity Test: 145 cm³/g
- Linear Mold Shrinkage: 0.0050 cm/cm
$ 1757/MT
- Density: 1.42 g/cc
- Water Absorption: 4.0 - 4.6 %
- Moisture Absorption at Equilibrium: 1.1 - 1.5 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 42.6 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 2100/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.37 g/cc
- Water Absorption: 5.2 - 5.8 %
- Moisture Absorption at Equilibrium: 1.5 - 1.9 %
- Moisture Absorption at Equilibrium: 1.7 %
$ 1445/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 65 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1684/MT
- Bulk Density: 0.700 - 0.800 g/cc
- Density: 1.37 g/cc
- Water Absorption: 2.2 %
- Moisture Absorption at Equilibrium: 0.80 %
- Viscosity Measurement: 66
$ 1643/MT
- Density: 1.12 g/cc
- Water Absorption: 10.5 %
- Moisture Absorption at Equilibrium: 3.2 %
- Relative Viscosity: 3.3 cP
- Viscosity Test: 195 cm³/g
$ 1770/MT
- Density: 0.00400 - 0.0120 g/cc @Pressure 0.1013 MPa, Temperature 20.0 °C
- Decomposition Temperature: >= 350 °C
- Color: Gray
- Commercial Status: Europe
- Ignition Temperature: > 580°C
$ 1834/MT
- Density: 1.39 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 104 cm³/g
- Linear Mold Shrinkage, Flow: 0.0039 cm/cm
$ 2208/MT
- Density: 1.13 g/cc
- Moisture Absorption at Equilibrium: 1.3 %
- Moisture Absorption at Equilibrium: 2.7 %
- Moisture Absorption at Equilibrium: 9.5 %
- Linear Mold Shrinkage: 0.0508 cm/cm
$ 1556/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0055 cm/cm
- Melt Flow: 8.0 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1719/MT
- Density: 1.25 g/cc
- Hardness, Shore D: 60
- Tensile Strength, Ultimate: 43.0 MPa
- Tensile Strength, Yield: 22.0 MPa @Strain 100 %
- Tensile Strength, Yield: 36.0 MPa @Strain 300 %
$ 1799/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 0.500 - 0.800 mm
- Softening Point: 70.0 °C
$ 1549/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 65 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2003/MT
- Density: 1.12 g/cc
- Water Absorption: 10.5 %
- Moisture Absorption at Equilibrium: 3.2 %
- Relative Viscosity: 3.3 cP
- Viscosity Test: 195 cm³/g
$ 1747/MT
- Density: 1.11 g/cc
- Hardness, Shore A: 75
- Tensile Strength: 0.800 MPa
- Tensile Strength: 2.70 MPa
- Tensile Strength: 7.70 MPa
$ 1769/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.5 %
- Linear Mold Shrinkage: 0.016 cm/cm
- Tensile Strength, Yield: 83.0 MPa
$ 1639/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.31 g/cc
- Moisture Absorption at Equilibrium: 2.0 - 2.4 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Linear Mold Shrinkage, Flow: 0.0080 cm/cm
$ 1548/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 25.0 MPa
$ 1935/MT
- Density: 1.52 g/cc
- Moisture Absorption at Equilibrium: 0.80 - 1.2 %
- Viscosity Measurement: 130
- Tensile Strength at Break: 110 MPa
- Tensile Strength, Yield: 48.0 MPa
$ 2599/MT
- Density: 1.29 g/cc
- Melt Flow: 258 g/10 min @Load 5.00 kg, Temperature 275 °C
- Tensile Strength, Yield: 35.0 MPa
- Elongation at Yield: 10 %
- Modulus of Elasticity: 1.10 GPa
$ 1646/MT
- Density: 1.29 g/cc
- Melt Flow: 258 g/10 min @Load 5.00 kg, Temperature 275 °C
- Tensile Strength, Yield: 35.0 MPa
- Elongation at Yield: 10 %
- Modulus of Elasticity: 1.10 GPa
$ 1737/MT
- Density: 1.42 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 111 cm³/g
- Linear Mold Shrinkage: 0.0050 cm/cm
$ 2525/MT
- Density: 1.48 g/cc
- Moisture Absorption at Equilibrium: 1.7 %
- Moisture Absorption at Equilibrium: 5.7 %
- Tensile Strength at Break: 128 MPa
- Elongation at Break: 3.0 %
$ 1511/MT
- Density: 1.08 g/cc
- Water Absorption: 1.2 %
- Water Absorption: 7.1 %
- Moisture Absorption at Equilibrium: 2.0 %
- Linear Mold Shrinkage: 0.013 cm/cm
$ 1494/MT
- Density: 1.31 g/cc
- Water Absorption: 2.0 - 2.6 %
- Moisture Absorption at Equilibrium: 0.80 - 1.2 %
- Viscosity Measurement: 150
- Linear Mold Shrinkage: 0.0040 cm/cm
$ 1445/MT
- Bulk Density: 0.0150 - 0.0190 g/cc
- Density: 0.0400 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2000 µm
- Particle Size: <= 5000 µm
$ 2065/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.31 g/cc
- Moisture Absorption at Equilibrium: 2.0 - 2.4 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 157.2 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 1480/MT
- Density: 1.41 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 5.0 %
- Moisture Absorption at Equilibrium: 1.6 %
- Tensile Strength, Ultimate: 190 MPa
$ 1553/MT
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.021 cm/cm
$ 2361/MT
- Density: 0.00400 - 0.0120 g/cc @Pressure 0.1013 MPa, Temperature 20.0 °C
- Decomposition Temperature: >= 350 °C
- Color: White
- Commercial Status: Europe
- Ignition Temperature: > 580°C
$ 2041/MT
- Bulk Density: 0.850 g/cc
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.021 cm/cm
$ 1930/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.0125 cm/cm
- Tensile Strength, Yield: 28.0 MPa
- Tensile Modulus: 2.40 GPa
- Charpy Impact Unnotched: 7.50 J/cm²
$ 1861/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0700 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1475/MT
- Density: 1.25 - 1.27 g/cc
- Melt Flow: 8.3 - 13.8 g/10 min
- Hardness, Shore D: 32
- Melting Point: 110 - 120 °C
- Vicat Softening Point: 91.0 °C
- Commercial Status: Europe
$ 1947/MT
- Density: 1.24 - 1.26 g/cc
- Water Vapor Transmission: 98.0 g/m²/day
- Oxygen Transmission Rate: 860 cc/m²/day
- Melt Flow: <= 2.5 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 2.4 - 5.2 g/10 min @Load 5.00 kg, Temperature 190 °C
$ 1744/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 0.700 - 0.900 mm
- Vapor Pressure: 0.685 bar @Temperature 25.0 °C
$ 2172/MT
- Density: 1.41 g/cc
- Water Absorption: 4.9 %
- Moisture Absorption at Equilibrium: 1.4 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Tensile Strength at Break: 45.0 MPa
$ 1766/MT
- Bulk Density: 0.00800 - 0.300 g/cc
- Density: 0.0100 - 0.400 g/cc @Pressure 0.101 MPa, Temperature 20.0 °C
- Melting Point: 120 - 180 °C
- Decomposition Temperature: >= 180 °C
- Flash Point: >= 200 °C
$ 1726/MT
- Density: 1.15 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0055 cm/cm
- Melt Flow: 14 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1655/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 0.900 - 1.30 mm
- Softening Point: 70.0 °C
$ 2186/MT
- Density: 1.74 g/cc
- Linear Mold Shrinkage: 0.0020 cm/cm
- Tensile Strength, Ultimate: 155 MPa
- Tensile Modulus: 13.4 GPa
- Melting Point: 220 °C
$ 1770/MT
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 29.4 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 145 MPa
$ 2218/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0500 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1786/MT
- Density: 1.37 g/cc
- Water Absorption: 6.9 - 7.5 %
- Moisture Absorption at Equilibrium: 2.1 - 2.5 %
- Viscosity Measurement: 123
- Melt Flow: 116.45 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 1696/MT
- Bulk Density: 0.850 g/cc
- Density: 1.33 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 9.31 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 2169/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.41 g/cc
- Water Absorption: 5.9 - 6.5 %
- Moisture Absorption at Equilibrium: >= 2.0 %
- Moisture Absorption at Equilibrium: 1.8 - 2.2 %
$ 1459/MT
- Bulk Density: 0.690 - 0.710 g/cc
- Density: 1.12 g/cc
- Water Absorption: 10.5 %
- Moisture Absorption at Equilibrium: 3.2 %
- Viscosity Measurement: 3.19 - 3.41
$ 1460/MT
- Density: 1.58 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 112 cm³/g
- Linear Mold Shrinkage: 0.0030 cm/cm
$ 1524/MT
- Density: 1.50 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 135 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 10.8 GPa
$ 1595/MT
- Density: 1.26 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- High Load Melt Index: 7.0 g/10 min @Load 21.6 kg, Temperature 250 °C
$ 1945/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.36 g/cc
- Water Absorption: 6.3 - 6.9 %
- Moisture Absorption at Equilibrium: 1.9 - 2.3 %
- Viscosity Measurement: 145
$ 1566/MT
- Density: 1.12 g/cc
- Water Absorption: 10.5 %
- Moisture Absorption at Equilibrium: 3.2 %
- Relative Viscosity: 3.3 cP
- Viscosity Test: 195 cm³/g
$ 1816/MT
- Density: 1.16 g/cc
- Water Absorption: 8.0 - 9.0 %
- Moisture Absorption at Equilibrium: 2.6 - 3.2 %
- Viscosity Test: 150 cm³/g
- Linear Mold Shrinkage: 0.0080 cm/cm
$ 1807/MT
- Density: 1.2784 g/cc
- Density: 1.49 g/cc
- Water Absorption: 0.90 %
- Water Absorption: 5.2 %
- Moisture Absorption at Equilibrium: 1.5 %
$ 1468/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0045 cm/cm
- Melt Flow: 10 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 2482/MT
- Density: 1.67 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Hardness, Rockwell R: 118
- Tensile Strength at Break: 135 MPa
- Tensile Strength at Break: 60.0 MPa @Temperature 120 °C
$ 1978/MT
- Spiral Flow: 30.0 cm @Thickness 1.50 mm, Temperature 80.0 °C
- Spiral Flow: 43.0 cm @Thickness 2.00 mm, Temperature 80.0 °C
- Tensile Strength at Break: 240 MPa
- Elongation at Break: 2.2 %
- Tensile Modulus: 16.4 GPa
$ 1507/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Softening Point: 70.0 °C
- Decomposition Temperature: >= 220 °C
$ 2198/MT
- Density: 0.982 g/cc @Temperature 30.0 °C
- Molecular Weight: 950 - 1050 g/mol
- Melting Point: 26.0 °C
- Boiling Point: >= 250 °C
- Flash Point: >= 240 °C
$ 2196/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 9.2 %
- Moisture Absorption at Equilibrium: 2.6 %
- Viscosity Measurement: 220
$ 2065/MT
- Density: 1.32 g/cc
- Water Absorption: 5.7 - 6.3 %
- Moisture Absorption at Equilibrium: 1.7 - 2.1 %
- Viscosity Test: 145 cm³/g
- Linear Mold Shrinkage: 0.0055 cm/cm
$ 1479/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0350 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1814/MT
- Bulk Density: 0.850 g/cc
- Density: 1.43 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 7.579 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1533/MT
- Bulk Density: 0.0180 - 0.0350 g/cc
- Bead Size: 0.640 - 0.680 mm
- Moisture Content: <= 1.0 %
- Commercial Status: North America
- Sieve Analysis: <0.4 mm
$ 1853/MT
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 8.8 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 145 MPa
$ 2449/MT
- Bulk Density: 0.700 - 0.800 g/cc
- Density: 1.48 g/cc
- Water Absorption: 1.5 %
- Moisture Absorption at Equilibrium: 0.50 %
- Viscosity Measurement: 56
$ 1509/MT
- Density: 1.39 g/cc
- Water Absorption: 1.1 %
- Water Absorption: 6.4 %
- Moisture Absorption at Equilibrium: 1.8 %
- Relative Viscosity: 2.6 cP
$ 1507/MT
- Density: 1.07 g/cc
- Water Absorption: 1.1 %
- Water Absorption: 6.7 %
- Moisture Absorption at Equilibrium: 1.9 %
- Linear Mold Shrinkage: 0.014 cm/cm
$ 1785/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0055 cm/cm
- Melt Flow: 4.0 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1941/MT
- Density: 1.13 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.2 %
- Relative Viscosity: 3.5 cP
- Viscosity Test: 205 cm³/g
$ 2297/MT
- Density: 1.36 g/cc
- Water Absorption: 6.3 - 6.9 %
- Moisture Absorption at Equilibrium: 1.9 - 2.3 %
- Viscosity Test: 140 cm³/g
- Linear Mold Shrinkage: 0.0035 cm/cm
$ 2172/MT
- Bulk Density: 0.600 - 0.900 g/cc
- Density: 1.53 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 102
$ 1552/MT
- Density: 1.31 g/cc
- Water Absorption: 6.6 - 7.2 %
- Moisture Absorption at Equilibrium: 2.0 - 2.4 %
- Viscosity Measurement: 150
- Melt Flow: 157.2 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 1520/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 35.0 MPa
$ 1514/MT
- Density: 0.927 g/cc
- Water Absorption: 0.050 %
- Moisture Absorption at Equilibrium: 0.050 %
- Tensile Strength, Ultimate: 22.0 MPa
- Tensile Strength, Yield: 6.00 MPa
$ 2274/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2209/MT
- Density: 1.68 g/cc
- Viscosity Measurement: 0.49
- Linear Mold Shrinkage: 0.0030 cm/cm
- Hardness, Rockwell R: 118
- Tensile Strength at Break: 130 MPa
$ 2254/MT
- Bulk Density: 0.850 g/cc
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.021 cm/cm
$ 2381/MT
- Density: 1.41 g/cc
- Water Absorption: 5.9 - 6.5 %
- Moisture Absorption at Equilibrium: 1.8 - 2.2 %
- Viscosity Measurement: 140
- Linear Mold Shrinkage: 0.0035 cm/cm
$ 1839/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 0.200 - 0.400 mm
- Softening Point: 70.0 °C
$ 2015/MT
- Density: 1.42 g/cc
- Water Absorption: 4.0 - 4.6 %
- Moisture Absorption at Equilibrium: 1.1 - 1.5 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 42.6 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 1887/MT
- Density: 1.10 g/cc
- Moisture Absorption at Equilibrium: 2.4 %
- Moisture Absorption at Equilibrium: 8.6 %
- Tensile Strength, Yield: 70.0 MPa
- Elongation at Break: 70 %
$ 2218/MT
- Density: 1.37 g/cc
- Hardness, Shore D: 67
- Tensile Strength: 60.0 MPa
- Elongation at Break: 30 %
- Modulus of Elasticity: 1.80 GPa
$ 1845/MT
- Density: 1.24 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption at Equilibrium: 2.2 %
- Viscosity Test: 149 cm³/g
- Tensile Strength, Ultimate: 122 MPa
$ 2452/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0055 cm/cm
- Melt Flow: 5.5 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1864/MT
- Density: 1.41 g/cc
- Water Absorption: 5.9 - 6.5 %
- Moisture Absorption at Equilibrium: 1.8 - 2.2 %
- Viscosity Measurement: 140
- Linear Mold Shrinkage: 0.0035 cm/cm
$ 2293/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.62 g/cc
- Water Absorption: 3.5 - 4.5 %
- Moisture Absorption at Equilibrium: 0.40 - 0.80 %
- Viscosity Measurement: 135
$ 2078/MT
- Bulk Density: 0.600 - 0.900 g/cc
- Density: 1.20 - 1.35 g/cc
- Specific Heat Capacity: 1.50 J/g-°C
- Melting Point: 220 - 230 °C
- Decomposition Temperature: >= 290 °C
$ 2302/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- CTE, linear, Parallel to Flow: 135 µm/m-°C @Temperature 20.0 °C
$ 1511/MT
- Tensile Strength: 118 MPa @Temperature 120 °C
- Tensile Modulus: 7.335 GPa @Temperature 120 °C
- Charpy Impact, Notched: 1.40 J/cm² @Temperature -30.0 °C
- Charpy Impact, Notched: 3.50 J/cm² @Temperature 23.0 °C
- Charpy Impact, Notched: 3.70 J/cm² @Temperature 23.0 °C
$ 1852/MT
- Density: 1.73 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.12 %
- Viscosity Test: 90 cm³/g
- Linear Mold Shrinkage, Flow: 0.0010 cm/cm
$ 2051/MT
- Bulk Density: 0.640 - 0.740 g/cc
- Density: 1.12 - 1.15 g/cc
- Melting Point: 220 °C
- Decomposition Temperature: >= 300 °C
- Commercial Status: Europe
- Ignition Temperature: >400°C
$ 2125/MT
- Bulk Density: 0.640 - 0.740 g/cc
- Density: 1.12 - 1.15 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Viscosity Measurement: 3.89 - 4.17
$ 1493/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.23 g/cc
- Water Absorption: 7.7 - 8.3 %
- Moisture Absorption at Equilibrium: 2.3 - 2.9 %
- Viscosity Measurement: 170
$ 1461/MT
- Density: 1.01 g/cc
- Water Absorption: 0.070 %
- Melt Flow: 10 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Shore D: 69
- Tensile Strength, Yield: 28.0 MPa
$ 2129/MT
- Density: 1.23 g/cc
- Hardness, Shore A: 92
- Hardness, Shore D: 41
- Tensile Strength, Ultimate: 37.0 MPa
- Tensile Strength, Yield: 11.0 MPa @Strain 100 %
$ 2505/MT
- Density: 1.06 g/cc
- Moisture Absorption at Equilibrium: 2.1 %
- Moisture Absorption at Equilibrium: 7.3 %
- Linear Mold Shrinkage: 0.04572 cm/cm
- Tensile Strength at Break: 45.0 MPa
$ 2357/MT
- Density: 1.21 g/cc
- Tensile Strength at Break: 90.0 MPa
- Elongation at Break: 3.5 %
- Flexural Modulus: 4.39 GPa
- Izod Impact, Notched (ISO): 5.40 kJ/m² @Temperature -40.0 °C
$ 1538/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.32 g/cc
- Water Absorption: 5.7 - 6.3 %
- Moisture Absorption at Equilibrium: 1.7 - 2.1 %
- Viscosity Measurement: 145
$ 2505/MT
- Density: 1.11 g/cc @Thickness 2.00 mm
- Hardness, Shore A: 80 @Thickness 2.00 mm
- Tensile Strength, Ultimate: 48.0 MPa @Thickness 2.00 mm
- Tensile Strength, Yield: 4.80 MPa @Strain 100 %
- Tensile Strength, Yield: 12.0 MPa @Strain 300 %, Thickness 0.760 mm
$ 1535/MT
- Density: 1.31 g/cc
- Water Absorption: 6.6 - 7.2 %
- Moisture Absorption at Equilibrium: 2.0 - 2.4 %
- Melt Flow: 131 g/10 min @Load 5.00 kg, Temperature 275 °C
- Tensile Strength, Yield: 90.0 MPa
$ 1485/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 1.00 - 2.30 mm
- Vapor Pressure: 0.685 bar @Temperature 25.0 °C
$ 1491/MT
- Bulk Density: 0.0220 - 0.0260 g/cc
- Density: 0.0300 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 4500 µm
$ 2334/MT
- Density: 1.60 g/cc
- Water Absorption: 1.6 %
- Moisture Absorption at Equilibrium: 0.60 %
- Viscosity Test: 56 cm³/g
- Linear Mold Shrinkage, Flow: 0.0028 cm/cm
$ 1553/MT
- Density: 1.07 g/cc
- Water Absorption: 1.2 %
- Water Absorption: 7.1 %
- Moisture Absorption at Equilibrium: 2.0 %
- Linear Mold Shrinkage: 0.013 cm/cm
$ 1485/MT
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 3.08 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 130 MPa @Load 36.5 kg, Time 30.0 sec
$ 1901/MT
- Viscosity Measurement: 350 - 470 @Temperature 120 °C
- Ball Indentation Hardness: 450 MPa
- Total Acid Number: 15 - 19
- Color: Off-White
- Congealing Point: 98°C
$ 1633/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.23 g/cc
- Water Absorption: 7.7 - 8.3 %
- Moisture Absorption at Equilibrium: 2.3 - 2.9 %
- Viscosity Measurement: 170
$ 2255/MT
- Density: 1.31 g/cc
- Water Absorption: 2.0 - 2.6 %
- Moisture Absorption at Equilibrium: 0.80 - 1.2 %
- Viscosity Measurement: 150
- Linear Mold Shrinkage: 0.0040 cm/cm
$ 1765/MT
- Density: 1.04 g/cc
- Tensile Strength at Break: 38.0 MPa
- Elongation at Break: 160 %
- Tensile Modulus: 0.494 GPa
- Flexural Modulus: 0.480 GPa
$ 1911/MT
- Density: 1.24 g/cc
- Hardness, Shore A: 98
- Hardness, Shore D: 54
- Tensile Strength, Ultimate: 42.0 MPa
- Tensile Strength, Yield: 19.0 MPa @Strain 100 %
$ 2163/MT
- Density: 1.23 g/cc
- Water Absorption: 7.7 - 8.3 %
- Moisture Absorption at Equilibrium: 2.3 %
- Moisture Absorption at Equilibrium: 2.3 - 2.9 %
- Moisture Absorption at Equilibrium: 7.7 %
$ 1864/MT
- Density: 1.37 g/cc
- Moisture Absorption at Equilibrium: >= 0.80 %
- Moisture Absorption at Equilibrium: >= 4.5 %
- Tensile Strength at Break: 165 MPa @Temperature 23.0 °C
- Tensile Strength at Break: 249 MPa @Temperature -40.0 °C
$ 1799/MT
- Density: 0.930 g/cc
- Linear Mold Shrinkage, Flow: 0.010 cm/cm
- Tensile Strength, Yield: 15.0 MPa
- Elongation at Break: >= 50 %
- Tensile Modulus: 0.850 GPa
$ 2266/MT
- Density: 1.40 g/cc
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.7 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 145 MPa
$ 1447/MT
- Bulk Density: 0.700 - 0.800 g/cc
- Density: 1.47 g/cc
- Water Absorption: <= 1.7 %
- Moisture Absorption at Equilibrium: 0.60 %
- Viscosity Measurement: 56
$ 1562/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Tensile Strength, Ultimate: 61.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 5.70 GPa
$ 1505/MT
- Density: 1.39 g/cc
- Water Absorption: 1.1 %
- Water Absorption: 6.4 %
- Moisture Absorption at Equilibrium: 1.8 %
- Relative Viscosity: 2.6 cP
$ 1778/MT
- Water Absorption: 1.5 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Hardness, Rockwell R: 82
- Tensile Strength, Yield: 65.0 MPa
- Elongation at Break: >= 100 %
$ 2113/MT
- Bulk Density: 0.700 - 0.800 g/cc
- Density: 1.29 g/cc
- Water Absorption: <= 1.2 %
- Water Absorption: 0.56 % @Thickness 2.00 mm, Time 180000 sec
- Water Absorption: 1.0 % @Thickness 2.00 mm, Time 360000 sec
$ 1452/MT
- Density: 1.48 g/cc
- Moisture Absorption at Equilibrium: 0.90 %
- Moisture Absorption at Equilibrium: 1.6 %
- Moisture Absorption at Equilibrium: 5.7 %
- Melt Temperature: 270 - 295 °C
$ 1696/MT
- Density: 1.30 g/cc
- Water Absorption: 0.50 %
- Moisture Absorption at Equilibrium: 0.25 %
- Water Vapor Transmission: 10.0 g/m²/day
- Viscosity Test: 130 cm³/g
$ 1702/MT
- Density: 1.291 g/cc
- Density: 1.49 g/cc
- Water Absorption: 1.1 %
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.6 %
$ 1536/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Tensile Strength, Ultimate: 80.0 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 7.50 GPa
$ 2451/MT
- Bulk Density: 0.890 g/cc
- Density: 1.40 g/cc
- Melt Flow: 49 g/10 min @Load 10.0 kg, Temperature 190 °C
- Melting Point: 165 °C
- Decomposition Temperature: >= 240 °C
$ 1911/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0055 cm/cm
- Melt Flow: 13 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1732/MT
- Density: 1.31 g/cc
- Water Absorption: 6.6 - 7.2 %
- Moisture Absorption at Equilibrium: 2.0 - 2.4 %
- Viscosity Measurement: 150
- Melt Flow: 157.2 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 2017/MT
- Bulk Density: 0.0500 - 0.0600 g/cc
- Density: 0.0800 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1514/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 22 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 35.0 MPa
$ 1455/MT
- Bulk Density: 0.850 g/cc
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
$ 2245/MT
- Bulk Density: 0.700 g/cc
- Density: 1.12 - 1.15 g/cc
- Melting Point: 260 °C
- Decomposition Temperature: >= 300 °C
- Commercial Status: Europe
- Ignition Temperature: >400°C
$ 1511/MT
- Density: 1.13 g/cc
- Moisture Absorption at Equilibrium: 2.8 %
- Moisture Absorption at Equilibrium: 8.5 %
- Tensile Strength, Yield: 85.0 MPa
- Elongation at Break: 20 %
$ 1575/MT
- Bulk Density: 0.640 - 0.740 g/cc
- Density: 1.12 - 1.15 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Water Vapor Transmission: 28.0 g/m²/day
$ 1909/MT
- Bulk Density: 0.450 - 0.800 g/cc
- Density: 1.16 g/cc
- Water Absorption: 6.5 - 7.5 %
- Moisture Absorption at Equilibrium: 1.6 - 2.0 %
- Viscosity Measurement: 130
$ 1715/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 0.400 - 0.700 mm
- Vapor Pressure: 0.685 bar @Temperature 25.0 °C
$ 1480/MT
- Density: 0.00400 - 0.0120 g/cc @Pressure 0.1013 MPa, Temperature 20.0 °C
- Decomposition Temperature: >= 350 °C
- Commercial Status: Europe
- Ignition Temperature: > 580°C
$ 1555/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 1.20 - 1.50 mm
- Softening Point: 70.0 °C
$ 1712/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 0.700 - 0.900 mm
- Softening Point: 70.0 °C
$ 2231/MT
- Density: 1.19 g/cc
- Hardness, Shore D: 73
- Tensile Strength, Ultimate: 45.0 MPa
- Tensile Strength, Yield: 32.0 MPa @Strain 100 %
- Tensile Strength, Yield: 38.0 MPa @Strain 300 %
$ 2240/MT
- Density: 1.23 g/cc
- Hardness, Shore A: 93
- Tensile Strength, Ultimate: 37.5 MPa
- Tensile Strength, Yield: 11.8 MPa @Strain 100 %
- Tensile Strength, Yield: 24.4 MPa @Strain 300 %
$ 1507/MT
- Density: 1.12 g/cc @Thickness 2.00 mm
- Hardness, Shore A: 86 @Thickness 2.00 mm
- Tensile Strength, Ultimate: 52.0 MPa @Thickness 2.00 mm
- Tensile Strength, Yield: 7.60 MPa @Strain 100 %
- Tensile Strength, Yield: 19.0 MPa @Strain 300 %
$ 1685/MT
- Density: 1.36 g/cc
- Water Absorption: 2.1 %
- Water Absorption: 6.6 %
- Moisture Absorption at Equilibrium: 2.1 %
- Viscosity Test: 140 cm³/g
$ 1520/MT
- Density: 1.20 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- High Load Melt Index: 11 g/10 min @Load 21.6 kg, Temperature 250 °C
BASF Luranyl® KR 2454/3 G4 Polyphenylene Ether + Styrene-Butadiene Blend, 20% Glass Fiber Reinforced
$ 1752/MT
- Density: 1.22 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.15 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- High Load Melt Index: 15 g/10 min @Load 21.6 kg, Temperature 250 °C
$ 1860/MT
- Density: 1.14 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0045 cm/cm
- High Load Melt Index: 16 g/10 min @Load 21.6 kg, Temperature 250 °C
$ 1566/MT
- Density: 1.19 g/cc
- Hardness, Shore A: 82
- Tensile Strength, Ultimate: 36.0 MPa
- Tensile Strength, Yield: 1.10 MPa @Strain 300 %
- Tensile Strength, Yield: 5.50 MPa @Strain 100 %
$ 1768/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.5 %
- Linear Mold Shrinkage: 0.016 cm/cm
- Tensile Strength, Yield: 54.0 MPa
$ 1787/MT
- Density: 1.17 g/cc
- Hardness, Shore A: 60
- Tensile Strength: 20.0 MPa
- Tensile Strength: 35.0 MPa
- Tensile Strength: 1.00 MPa @Strain 20.0 %
$ 1621/MT
- Density: 1.67 g/cc
- Water Absorption: 4.1 - 4.7 %
- Moisture Absorption at Equilibrium: 1.0 - 1.4 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Melt Flow: 41.75 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 1675/MT
- Density: 1.31 g/cc
- Water Absorption: 2.0 - 2.6 %
- Moisture Absorption at Equilibrium: 0.80 - 1.2 %
- Viscosity Measurement: 150
- Linear Mold Shrinkage: 0.0040 cm/cm
$ 1485/MT
- Density: 1.07 g/cc
- Linear Mold Shrinkage, Flow: 0.0080 cm/cm
- Tensile Strength, Yield: 20.0 MPa
- Elongation at Break: 25 %
- Tensile Modulus: 1.90 GPa
$ 1522/MT
- Density: 1.24 - 1.26 g/cc
- Water Vapor Transmission: 84.0 g/m²/day
- Oxygen Transmission Rate: 670 cc/m²/day
- Melt Flow: <= 2.0 g/10 min
- Hardness, Shore D: 59
$ 1861/MT
- Density: 1.31 g/cc
- Water Absorption: 2.0 - 2.6 %
- Moisture Absorption at Equilibrium: 0.80 - 1.2 %
- Viscosity Measurement: 150
- Linear Mold Shrinkage: 0.0040 cm/cm
$ 1465/MT
- Density: 1.22 g/cc
- Water Absorption: 1.4 %
- Water Absorption: 8.3 %
- Moisture Absorption at Equilibrium: 2.3 %
- Linear Mold Shrinkage: 0.0030 cm/cm
$ 1610/MT
- Density: 1.48 g/cc
- Viscosity Test: 86 cm³/g
- Melt Flow: 65 g/10 min @Load 2.16 kg, Temperature 275 °C
- Tensile Strength, Ultimate: 110 MPa
- Elongation at Break: 1.9 %
$ 1993/MT
- Density: 1.24 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.30 %
- Viscosity Test: 63 cm³/g
- Linear Mold Shrinkage, Flow: 0.0068 cm/cm
$ 2272/MT
- Density: 1.24 g/cc
- Linear Mold Shrinkage, Flow: 0.011 cm/cm
- Tensile Strength, Yield: 34.0 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 4.50 GPa
$ 1445/MT
- Density: 1.53 g/cc
- Water Absorption: 0.20 %
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 101 cm³/g
$ 1767/MT
- Density: 1.24 g/cc
- Water Absorption: 7.0 %
- Moisture Absorption at Equilibrium: 2.2 %
- Viscosity Test: 145 cm³/g
- Linear Mold Shrinkage: 0.0055 cm/cm
$ 1787/MT
- Density: 1.21 g/cc
- Zone 1: 245 - 275 °C
- Zone 2: 260 - 285 °C
- Zone 3: 270 - 295 °C
- Zone 4: 270 - 295 °C
$ 1811/MT
- Density: 0.973 g/cc @Temperature 40.0 °C
- Molecular Weight: 1950 - 2050 g/mol
- Melting Point: 36.0 °C
- Boiling Point: >= 250 °C
- Flash Point: >= 246 °C
$ 2288/MT
- Density: 1.26 g/cc
- Hardness, Shore A: 80
- Tensile Strength, Ultimate: 31.0 MPa
- Tensile Strength, Yield: 6.60 MPa @Strain 100 %
- Tensile Strength, Yield: 16.6 MPa @Strain 300 %
$ 2280/MT
- Density: 1.37 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength at Break: 170 MPa
- Tensile Strength at Break: 77.0 MPa @Temperature 120 °C
- Tensile Strength at Break: 77.0 MPa @Temperature 120 °C
$ 2078/MT
- Density: 1.37 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 135
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm
$ 1711/MT
- Density: 1.36 g/cc
- Water Absorption: 6.2 %
- Moisture Absorption at Equilibrium: 2.4 %
- Viscosity Test: 150 cm³/g
- Linear Mold Shrinkage: 0.0090 cm/cm
$ 1648/MT
- Density: 1.28 g/cc
- Hardness, Shore D: 61
- Tensile Strength: 45.0 MPa
- Elongation at Break: 450 %
- Tear Strength: 180 kN/m
$ 1505/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0045 cm/cm
- Melt Flow: 2.5 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1802/MT
- Bulk Density: 0.640 g/cc
- Density: 0.0140 - 0.110 g/cc
- Bead Size: 0.850 - 1.70 mm
- Moisture Content: <= 1.2 %
- Commercial Status: North America
- Pentane Content: 3.75 - 3.95%
$ 2262/MT
- Density: 1.38 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Melt Flow: 6.0 g/10 min @Load 5.00 kg, Temperature 235 °C
- Tensile Strength, Ultimate: 165 MPa
- Elongation at Break: 3.0 %
$ 2513/MT
- Density: 1.43 g/cc
- Water Absorption: 5.4 - 6.0 %
- Moisture Absorption at Equilibrium: 1.6 - 2.0 %
- Viscosity Test: 140 cm³/g
- Melt Flow: 78.65 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 1753/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 0.400 - 0.700 mm
- Softening Point: 70.0 °C
$ 2091/MT
- Density: 1.76 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.12 %
- Viscosity Test: 75 cm³/g
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
$ 2473/MT
- Density: 1.16 g/cc @Thickness 2.00 mm
- Hardness, Shore A: 83 @Thickness 2.00 mm
- Tensile Strength, Ultimate: 38.0 MPa @Thickness 2.00 mm
- Tensile Strength, Yield: 5.90 MPa @Strain 100 %
- Tensile Strength, Yield: 13.0 MPa @Strain 300 %, Thickness 0.760 mm
$ 2260/MT
- Density: 1.76 g/cc
- Viscosity Test: 75 cm³/g
- Melt Flow: 110 g/10 min @Load 10.0 kg, Temperature 275 °C
- Tensile Strength, Ultimate: 170 MPa
- Elongation at Break: 1.4 %
$ 2165/MT
- Density: 1.22 g/cc
- Hardness, Shore A: 85
- Tensile Strength, Ultimate: 34.0 MPa
- Tensile Strength, Yield: 6.90 MPa @Strain 100 %
- Tensile Strength, Yield: 14.0 MPa @Strain 300 %
$ 1624/MT
- Density: 1.33 g/cc
- Water Absorption: 5.9 - 6.5 %
- Moisture Absorption at Equilibrium: 1.8 - 2.2 %
- Viscosity Measurement: 160
- Linear Mold Shrinkage: 0.0050 cm/cm
$ 1451/MT
- Density: 1.12 g/cc
- Water Absorption: 10.5 %
- Moisture Absorption at Equilibrium: 3.2 %
- Relative Viscosity: 3.3 cP
- Viscosity Test: 195 cm³/g
$ 1968/MT
- Bulk Density: 0.600 - 0.900 g/cc
- Density: 1.51 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 117
$ 1669/MT
- Density: 1.07 g/cc
- Linear Mold Shrinkage, Flow: 0.0080 cm/cm
- Tensile Strength, Yield: 20.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.00 GPa
$ 1752/MT
- Density: 1.14 g/cc @Thickness 2.00 mm
- Hardness, Shore A: 75 @Thickness 2.00 mm
- Tensile Strength, Ultimate: 41.0 MPa @Thickness 2.00 mm
- Tensile Strength, Yield: 4.80 MPa @Strain 100 %
- Tensile Strength, Yield: 11.0 MPa @Strain 300 %
$ 2229/MT
- Density: 1.37 g/cc
- Water Absorption: 7.2 %
- Moisture Absorption at Equilibrium: 2.3 %
- Viscosity Test: 140 cm³/g
- Tensile Strength, Ultimate: 120 MPa
$ 1895/MT
- Density: 1.06 g/cc
- Moisture Absorption at Equilibrium: 2.1 %
- Moisture Absorption at Equilibrium: 7.3 %
- Linear Mold Shrinkage: 0.04572 cm/cm
- Melt Temperature: 270 - 300 °C
$ 1513/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 14 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2013/MT
- Density: 1.13 g/cc
- Water Absorption: 9.0 - 10 %
- Moisture Absorption at Equilibrium: 2.6 - 3.4 %
- Viscosity Test: 150 cm³/g
- Linear Mold Shrinkage: 0.0065 cm/cm
$ 1628/MT
- Density: 1.21 g/cc
- Melt Flow: 18.15 g/10 min @Load 5.00 kg, Temperature 235 °C
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 3.5 %
- Flexural Modulus: 4.42 GPa
$ 2380/MT
- Bulk Density: 0.0300 - 0.0360 g/cc
- Density: 0.0600 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 4000 µm
$ 1475/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1813/MT
- Density: 1.13 g/cc
- Water Absorption: 9.0 - 10 %
- Moisture Absorption at Equilibrium: 2.6 - 3.4 %
- Viscosity Test: 150 cm³/g
- Linear Mold Shrinkage: 0.0065 cm/cm
$ 2190/MT
- Density: 1.41 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 98
- Linear Mold Shrinkage, Flow: 0.0063 cm/cm
$ 1815/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.32 g/cc
- Water Absorption: 6.8 - 7.4 %
- Moisture Absorption at Equilibrium: 2.1 - 2.5 %
- Viscosity Measurement: 140
$ 1502/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Tensile Strength, Ultimate: 61.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 5.70 GPa
$ 2276/MT
- Density: 1.36 g/cc
- Moisture Absorption at Equilibrium: 0.90 %
- Moisture Absorption at Equilibrium: 1.5 %
- Moisture Absorption at Equilibrium: 5.5 %
- Linear Mold Shrinkage: 0.00762 cm/cm
$ 2283/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.36 g/cc
- Water Absorption: 5.9 - 6.5 %
- Moisture Absorption at Equilibrium: 2.2 - 2.6 %
- Viscosity Measurement: 145
$ 1608/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 188 MPa
- Elongation at Break: 2.9 %
- Tensile Modulus: 12.6 GPa
$ 1528/MT
- Density: 1.48 g/cc
- Water Absorption: 0.90 %
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.6 %
- Linear Mold Shrinkage: 0.0040 cm/cm
$ 2069/MT
- Density: 0.928 g/cc
- Tensile Strength, Yield: 5.00 MPa
- Elongation at Break: >= 50 %
- Tensile Modulus: 0.0740 GPa
- Melting Point: 99.0 °C
- Electrical Resistivity: >= 1.00e+15 ohm-cm
$ 1676/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2386/MT
- Density: 1.39 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 105 cm³/g
- Linear Mold Shrinkage, Flow: 0.0016 cm/cm
$ 2117/MT
- Bulk Density: 0.0630 - 0.0770 g/cc
- Density: 0.0700 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 1500 µm
- Particle Size: <= 3000 µm
$ 2210/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 4.7 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 38.0 MPa
$ 1969/MT
- Density: 1.40 g/cc
- Water Absorption: 4.7 - 5.3 %
- Moisture Absorption at Equilibrium: 1.4 - 1.8 %
- Viscosity Measurement: 160
- Linear Mold Shrinkage: 0.0035 cm/cm
$ 1644/MT
- Density: 1.19 g/cc
- Hardness, Shore A: 65
- Tensile Strength: 25.0 MPa
- Tensile Strength: 40.0 MPa
- Tensile Strength: 1.50 MPa @Strain 20.0 %
$ 1511/MT
- Tensile Strength: 175 MPa @Treatment Temp. 220 °C, Time 5.40e+6 sec
- Tensile Strength: 175 MPa @Treatment Temp. 220 °C, Time 9.00e+6 sec
- Tensile Strength: 195 MPa @Treatment Temp. 220 °C, Time 1.80e+6 sec
- Tensile Stress: 12.0 MPa @Temperature 240 °C
- Tensile Stress: 20.0 MPa @Temperature 220 °C
$ 1500/MT
- Density: 1.38 g/cc
- Moisture Absorption at Equilibrium: 1.9 %
- Moisture Absorption at Equilibrium: 6.7 %
- Melt Flow: 46.92 g/10 min
- Tensile Strength at Break: 157 MPa
$ 2139/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 0.800 - 1.40 mm
- Softening Point: 70.0 °C
$ 1658/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.36 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage, Flow: 0.0025 cm/cm
- Linear Mold Shrinkage, Flow: 0.0025 cm/cm
$ 1645/MT
- Density: 1.36 g/cc
- Tensile Strength, Ultimate: 70.0 MPa
- Elongation at Break: 2.5 %
- Tensile Modulus: 4.50 GPa
- Flexural Modulus: 4.20 GPa
$ 1484/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0045 cm/cm
- Melt Flow: 28 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1771/MT
- Density: 1.25 - 1.27 g/cc
- Melt Flow: 2.7 - 4.9 g/10 min
- Surface Tension: 34 dynes/cm
- Hardness, Shore D: 32
- Tensile Strength: 34.0 MPa
$ 1671/MT
- Density: 1.25 - 1.27 g/cc
- Water Vapor Transmission: 140 g/m²/day
- Oxygen Transmission Rate: 1600 cc/m²/day
- Melt Flow: 2.7 - 4.9 g/10 min
- Hardness, Shore D: 32
$ 2088/MT
- Density: 1.37 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 100 cm³/g
- Linear Mold Shrinkage, Flow: 0.0095 cm/cm
$ 1544/MT
- Density: 1.33 g/cc
- Water Absorption: 5.9 - 6.5 %
- Moisture Absorption at Equilibrium: 1.8 - 2.2 %
- Viscosity Test: 160 cm³/g
- Linear Mold Shrinkage: 0.0050 cm/cm
$ 1476/MT
- Density: 1.34 g/cc
- Water Absorption: 0.90 %
- Water Absorption: 5.5 %
- Moisture Absorption at Equilibrium: 1.5 %
- Linear Mold Shrinkage: 0.0030 cm/cm
$ 1471/MT
- Density: 1.14 g/cc
- Hardness, Shore A: 63
- Tensile Strength, Ultimate: 23.0 MPa
- Tensile Strength, Yield: 2.60 MPa @Strain 100 %
- Tensile Strength, Yield: 4.70 MPa @Strain 300 %
$ 2288/MT
- Density: 0.928 g/cc
- Tensile Strength, Yield: 5.00 MPa
- Elongation at Break: >= 50 %
- Tensile Modulus: 0.0740 GPa
- Melting Point: 99.0 °C
- Electrical Resistivity: >= 1.00e+15 ohm-cm
$ 2109/MT
- Density: 1.09 g/cc
- Water Absorption: 1.5 %
- Water Absorption: 8.1 %
- Moisture Absorption at Equilibrium: 2.3 %
- Linear Mold Shrinkage: 0.012 cm/cm
$ 2365/MT
- Bulk Density: 0.0260 - 0.0300 g/cc
- Density: 0.0400 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 4000 µm
$ 2299/MT
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 3.4 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 135 MPa @Load 36.5 kg, Time 30.0 sec
$ 2412/MT
- Bulk Density: 0.250 - 0.300 g/cc
- Density: 1.37 g/cc
- Moisture Absorption at Equilibrium: 1.0 %
- Viscosity Measurement: 59
- Tensile Modulus: 2.70 GPa
$ 1479/MT
- Density: 1.53 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 113
- Viscosity Measurement: 70 @Temperature 290 °C
$ 1559/MT
- Density: 1.289 g/cc
- Density: 1.48 g/cc
- Water Absorption: 0.90 %
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.6 %
$ 1761/MT
- Density: 1.22 g/cc
- Water Absorption: 1.4 %
- Water Absorption: 8.3 %
- Moisture Absorption at Equilibrium: 2.3 %
- Linear Mold Shrinkage: 0.0030 cm/cm
$ 1576/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.43 g/cc
- Water Absorption: 4.3 - 5.3 %
- Moisture Absorption at Equilibrium: 0.80 - 1.2 %
- Viscosity Measurement: 130
$ 1548/MT
- Density: 1.10 g/cc
- Water Absorption: 8.5 - 9.5 %
- Moisture Absorption at Equilibrium: 2.1 - 2.9 %
- Melt Flow: 121 g/10 min @Load 5.00 kg, Temperature 275 °C
- Tensile Strength, Yield: 35.0 MPa
$ 2567/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- CTE, linear, Parallel to Flow: 135 µm/m-°C @Temperature 20.0 °C
$ 1778/MT
- Density: 1.36 g/cc
- Water Absorption: 6.3 - 6.9 %
- Moisture Absorption at Equilibrium: 1.9 - 2.3 %
- Viscosity Test: 140 cm³/g
- Linear Mold Shrinkage: 0.0035 cm/cm
$ 1739/MT
- Density: 1.49 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 108
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
$ 1547/MT
- Density: 1.30 g/cc
- Water Absorption: 0.90 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
$ 2035/MT
- Density: 1.12 g/cc
- Hardness, Shore A: 87
- Tensile Strength: 2.50 MPa
- Tensile Strength: 6.00 MPa
- Tensile Strength: 11.5 MPa
$ 2235/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.36 g/cc
- Water Absorption: 6.3 - 6.9 %
- Moisture Absorption at Equilibrium: 1.9 - 2.3 %
- Viscosity Measurement: 140
$ 1703/MT
- Bulk Density: 0.640 - 0.740 g/cc
- Density: 1.12 - 1.15 g/cc
- Melting Point: 220 °C
- Decomposition Temperature: >= 300 °C
- Commercial Status: Europe
- Ignition Temperature: >400°C
$ 1558/MT
- Density: 1.42 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Tensile Strength, Ultimate: 70.0 MPa
- Elongation at Break: 1.5 %
- Tensile Modulus: 6.00 GPa
$ 1870/MT
- Density: 1.11 g/cc
- Hardness, Shore A: 80
- Tensile Strength: 2.50 MPa
- Tensile Strength: 5.50 MPa
- Tensile Strength: 9.00 MPa
$ 2182/MT
- Density: 1.48 g/cc
- Water Absorption: 2.2 %
- Water Absorption: 6.6 %
- Moisture Absorption at Equilibrium: 2.0 %
- Viscosity Test: 160 cm³/g
$ 2330/MT
- Density: 1.07 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.15 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- High Load Melt Index: 25 g/10 min @Load 21.6 kg, Temperature 250 °C
$ 1634/MT
- Density: 1.25 g/cc
- Hardness, Shore D: 55
- Tensile Strength: 45.0 MPa
- Tensile Strength: 13.0 MPa @Strain 20.0 %
- Tensile Strength: 16.0 MPa @Strain 100 %
$ 2130/MT
- Bulk Density: 0.600 - 0.900 g/cc
- Density: 1.55 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 105
$ 1809/MT
- Density: 1.16 g/cc
- Water Absorption: 8.0 - 9.0 %
- Moisture Absorption at Equilibrium: 2.6 - 3.2 %
- Viscosity Measurement: 150
- Linear Mold Shrinkage: 0.0080 cm/cm
$ 1823/MT
- Density: 1.16 g/cc
- Water Absorption: 8.0 - 9.0 %
- Moisture Absorption at Equilibrium: 2.6 - 3.2 %
- Viscosity Measurement: 150
- Linear Mold Shrinkage: 0.0080 cm/cm
$ 2551/MT
- Bulk Density: 0.690 - 0.710 g/cc
- Density: 1.12 g/cc
- Water Absorption: 10.5 %
- Moisture Absorption at Equilibrium: 3.2 %
- Water Vapor Transmission: 50.0 g/m²/day
$ 2260/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 0.700 - 1.00 mm
- Vapor Pressure: 0.685 bar @Temperature 25.0 °C
$ 2080/MT
- Density: 1.19 g/cc
- Hardness, Shore A: 70
- Tensile Strength: 30.0 MPa
- Tensile Strength: 35.0 MPa
- Tensile Strength: 1.00 MPa @Strain 20.0 %
$ 1746/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.31 g/cc
- Moisture Absorption at Equilibrium: 2.0 - 2.4 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 157.2 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 1680/MT
- Bulk Density: 0.640 g/cc
- Density: 0.0140 - 0.0480 g/cc
- Bead Size: 0.850 - 1.70 mm
- Moisture Content: <= 1.2 %
- Commercial Status: North America
- Pentane Content: 5.7 - 6.4%
$ 2064/MT
- Density: 1.48 g/cc
- Water Absorption: 6.6 %
- Moisture Absorption at Equilibrium: 2.0 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Tensile Strength, Ultimate: 135 MPa
$ 1853/MT
- Density: 1.56 g/cc
- Tensile Strength at Break: 80.0 MPa
- Elongation at Break: 1.5 %
- Flexural Modulus: 6.80 GPa
- Charpy Impact Unnotched: 1.50 J/cm² @Temperature 5.00 °C
$ 1619/MT
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.021 cm/cm
- Linear Mold Shrinkage, Transverse: 0.021 cm/cm
$ 1734/MT
- Bulk Density: 0.600 - 0.900 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 95
- Linear Mold Shrinkage, Flow: 0.0013 cm/cm
$ 1668/MT
- Density: 1.06 g/cc
- Tensile Strength, Yield: 45.0 MPa
- Elongation at Yield: 3.7 %
- Flexural Modulus: 1.75 GPa
- Charpy Impact Unnotched: NB
$ 2262/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Relative Viscosity: 3.3 cP
- Viscosity Test: 195 cm³/g
$ 2034/MT
- Density: 1.39 g/cc
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.7 %
- Tensile Strength, Ultimate: 195 MPa
- Elongation at Break: 3.0 %
$ 1593/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2158/MT
- Bulk Density: 0.0120 - 0.0300 g/cc
- Bead Size: 1.22 - 1.40 mm
- Moisture Content: <= 1.0 %
- Commercial Status: North America
- Sieve Analysis: <1.00 mm
$ 2321/MT
- Density: 1.12 - 1.15 g/cc
- Water Vapor Transmission: 43.0 g/m²/day
- Oxygen Transmission Rate: 14.0 cc/m²/day
- Tensile Strength at Break: 250 MPa
- Tensile Strength at Break: 260 MPa
$ 2060/MT
- Density: 1.07 g/cc
- Water Absorption: 1.1 %
- Water Absorption: 6.7 %
- Moisture Absorption at Equilibrium: 1.9 %
- Linear Mold Shrinkage: 0.014 cm/cm
$ 1605/MT
- Density: 1.16 g/cc
- Hardness, Shore D: 53
- Tensile Strength, Ultimate: 40.0 MPa
- Tensile Strength, Yield: 20.0 MPa @Strain 100 %
- Tensile Strength, Yield: 30.0 MPa @Strain 300 %
$ 2231/MT
- Density: 1.50 g/cc
- Water Absorption: 4.8 %
- Moisture Absorption at Equilibrium: 1.4 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 167 MPa
$ 1951/MT
- Density: 1.14 g/cc
- Water Absorption: 8.5 %
- Moisture Absorption at Equilibrium: 2.5 %
- Linear Mold Shrinkage: 0.016 cm/cm
- Tensile Strength, Yield: 54.0 MPa
$ 2185/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 26 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 35.0 MPa
$ 1502/MT
- Density: 1.22 g/cc
- Hardness, Shore A: 89
- Tensile Strength, Ultimate: 32.0 MPa
- Tensile Strength, Yield: 9.70 MPa @Strain 100 %
- Tensile Strength, Yield: 20.9 MPa @Strain 300 %
$ 1454/MT
- Density: 1.02 g/cc
- Water Absorption: 0.070 %
- Melt Flow: 16 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Shore D: 74
- Tensile Strength, Yield: 28.0 MPa
$ 1505/MT
- Flexural Modulus: 5.40 GPa
- Izod Impact, Notched (ISO): 5.60 kJ/m²
- Melting Point: 220 °C
- UL RTI, Electrical: 130 °C @Thickness 1.50 mm
- UL RTI, Mechanical with Impact: 85.0 °C @Thickness 1.50 mm
$ 2144/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.7 %
- Viscosity Measurement: 60
- Tensile Strength, Yield: 48.0 MPa
$ 2326/MT
- Bulk Density: 0.0260 - 0.0300 g/cc
- Density: 0.0500 g/cc
- Water Absorption: <= 1.0 % @Time 86400 sec
- Particle Size: >= 2500 µm
- Particle Size: <= 4000 µm
$ 1666/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 0.400 - 0.700 mm
- Vapor Pressure: 0.685 bar @Temperature 25.0 °C
$ 1565/MT
- Density: 1.13 g/cc
- Water Absorption: 8.0 - 9.0 %
- Moisture Absorption at Equilibrium: 2.5 - 3.1 %
- Viscosity Measurement: 150
- Linear Mold Shrinkage: 0.0085 cm/cm
$ 1589/MT
- Density: 1.37 g/cc
- Water Absorption: 2.2 %
- Moisture Absorption at Equilibrium: 0.80 %
- Viscosity Test: 48 cm³/g
- Linear Mold Shrinkage: 0.0070 cm/cm
$ 1593/MT
- Bulk Density: 0.850 g/cc
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.021 cm/cm
$ 1688/MT
- Density: 1.24 g/cc
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Tensile Strength, Yield: 26.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.50 GPa
$ 1547/MT
- Density: 1.22 g/cc
- Water Absorption: 7.2 - 7.8 %
- Moisture Absorption at Equilibrium: 2.1 - 2.7 %
- Viscosity Measurement: 160
- Linear Mold Shrinkage: 0.0050 cm/cm
$ 1556/MT
- Density: 1.32 g/cc
- Hardness, Shore D: 75
- Tensile Strength: 65.0 MPa
- Elongation at Break: 25 %
- Charpy Impact Unnotched: 7.00 J/cm² @Temperature -30.0 °C
$ 1712/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.31 g/cc
- Moisture Absorption at Equilibrium: 2.0 - 2.4 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 157.2 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 1564/MT
- Density: 1.08 g/cc
- Water Absorption: 1.2 %
- Water Absorption: 7.1 %
- Moisture Absorption at Equilibrium: 2.0 %
- Linear Mold Shrinkage: 0.013 cm/cm
$ 1727/MT
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage: 0.020 cm/cm
- Linear Mold Shrinkage, Flow: 0.021 cm/cm
$ 1708/MT
- Density: 1.38 g/cc
- Hardness, Shore D: 73
- Tensile Strength: 80.0 MPa
- Tensile Strength: 30.0 MPa @Strain 2.00 %, Temperature 60.0 °C
- Tensile Strength: 35.0 MPa @Strain 2.00 %, Temperature 40.0 °C
$ 1868/MT
- Density: 1.20 g/cc
- Hardness, Shore A: 55
- Tensile Strength: 35.0 MPa
- Tensile Strength: 0.800 MPa @Strain 20.0 %
- Tensile Strength: 1.10 MPa @Strain 100 %
$ 1904/MT
- Bulk Density: 0.0160 - 0.0350 g/cc
- Density: 0.0200 g/cc
- Tensile Stress: 0.0800 MPa
- Tensile Stress: 0.120 MPa
- Tensile Stress: 0.260 MPa
$ 1527/MT
- Density: 1.49 g/cc
- Water Absorption: 0.60 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 63 cm³/g
- Linear Mold Shrinkage, Flow: 0.0029 cm/cm
$ 1948/MT
- Bulk Density: 0.700 - 0.800 g/cc
- Density: 1.50 g/cc
- Water Absorption: 1.6 %
- Moisture Absorption at Equilibrium: 0.60 %
- Viscosity Measurement: 56
$ 1592/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.011 cm/cm
- Tensile Strength, Yield: 24.0 MPa
- Tensile Modulus: 2.20 GPa
- Charpy Impact Unnotched: 5.50 J/cm²
$ 1589/MT
- Density: 1.40 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 130 MPa @Load 36.5 kg, Time 30.0 sec
$ 1607/MT
- Bulk Density: 0.640 g/cc
- Density: 0.0180 - 0.0480 g/cc
- Bead Size: 0.350 - 0.850 mm
- Moisture Content: <= 1.2 %
- Commercial Status: North America
- Pentane Content: 5.7 - 6.4%
$ 2487/MT
- Density: 1.73 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 97
- Viscosity Measurement: 70 @Temperature 290 °C
$ 1707/MT
- Density: 1.35 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.25 %
- Linear Mold Shrinkage: 0.019 cm/cm
- Tensile Strength, Yield: 36.0 MPa
$ 1759/MT
- Density: 1.46 g/cc
- Viscosity Measurement: 150
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 21.9 g/10 min @Load 5.00 kg, Temperature 275 °C
- Tensile Strength, Yield: 130 MPa
$ 1603/MT
- Density: 1.13 g/cc
- Water Absorption: 9.0 - 10 %
- Moisture Absorption at Equilibrium: 2.6 - 3.4 %
- Viscosity Measurement: 145
- Linear Mold Shrinkage: 0.0055 cm/cm
$ 1646/MT
- Density: 1.48 g/cc
- Water Absorption: 0.90 %
- Water Absorption: 5.7 %
- Moisture Absorption at Equilibrium: 1.6 %
- Linear Mold Shrinkage: 0.0040 cm/cm
$ 1521/MT
- Density: 1.13 g/cc
- Water Absorption: 9.5 %
- Moisture Absorption at Equilibrium: 2.6 %
- Relative Viscosity: 4.0 cP
- Viscosity Test: 250 cm³/g
$ 1493/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm
- Melt Flow: 72 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2217/MT
- Density: 1.33 g/cc
- Water Absorption: 6.4 %
- Moisture Absorption at Equilibrium: 1.9 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 124 MPa
$ 1946/MT
- Density: 1.36 g/cc
- Tensile Strength at Break: 110 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 7.90 GPa
- Flexural Modulus: 7.96 GPa
$ 2050/MT
- Density: 1.20 g/cc
- Hardness, Shore A: 70
- Tensile Strength: 40.0 MPa
- Tensile Strength: 1.40 MPa @Strain 20.0 %
- Tensile Strength: 3.30 MPa @Strain 100 %
$ 1651/MT
- Density: 1.21 g/cc
- Zone 1: 245 - 275 °C
- Zone 2: 260 - 285 °C
- Zone 3: 270 - 295 °C
- Zone 4: 270 - 295 °C
$ 1885/MT
- Density: 1.15 g/cc
- Water Absorption: 8.0 %
- Moisture Absorption at Equilibrium: 2.8 %
- Tensile Strength, Yield: 95.0 MPa
- Elongation at Break: 50 %
$ 2166/MT
- Density: 1.54 g/cc
- Water Absorption: 0.90 %
- Moisture Absorption at Equilibrium: 0.15 %
- Linear Mold Shrinkage, Flow: 0.010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.016 cm/cm
$ 1537/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Tensile Strength, Ultimate: 40.0 MPa
- Elongation at Break: 4.0 %
- Tensile Modulus: 3.60 GPa
$ 1485/MT
- Density: 1.06 g/cc
- Linear Mold Shrinkage, Flow: 0.0125 cm/cm
- Tensile Strength, Yield: 28.0 MPa
- Tensile Modulus: 2.50 GPa
- Charpy Impact Unnotched: 7.50 J/cm²
$ 1973/MT
- Density: 1.35 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.25 %
- Linear Mold Shrinkage: 0.019 cm/cm
- Linear Mold Shrinkage, Flow: 0.018 cm/cm
$ 1794/MT
- Bulk Density: 0.650 - 0.850 g/cc
- Density: 1.27 g/cc
- Water Absorption: 0.50 %
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.012 cm/cm
$ 1594/MT
- Density: 1.37 g/cc
- Water Absorption: 0.20 %
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 116 cm³/g
$ 1815/MT
- Density: 1.31 g/cc
- Water Absorption: 0.40 %
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Measurement: 105
- Viscosity Measurement: 70 @Temperature 290 °C
$ 1476/MT
- Bulk Density: 0.600 g/cc
- Density: 0.00310 g/cc
- Density: 1.02 - 1.05 g/cc
- Bead Size: 0.500 - 0.800 mm
- Softening Point: 70.0 °C
$ 1557/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 4.7 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 35.0 MPa
$ 1487/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.38 g/cc
- Water Absorption: 5.0 - 6.0 %
- Moisture Absorption at Equilibrium: 1.1 - 1.5 %
- Viscosity Measurement: 130
$ 1524/MT
- Density: 1.2784 g/cc
- Density: 1.49 g/cc
- Water Absorption: 0.90 %
- Water Absorption: 5.2 %
- Moisture Absorption at Equilibrium: 1.5 %
$ 2160/MT
- Density: 1.36 g/cc
- Moisture Absorption at Equilibrium: 2.1 %
- Moisture Absorption at Equilibrium: 6.6 %
- Melt Flow: 40.8 g/10 min @Load 5.00 kg, Temperature 275 °C
- Tensile Strength at Break: 170 MPa
$ 1605/MT
- Density: 1.05 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0045 cm/cm
- Melt Flow: 1.8 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 2182/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Water Absorption: 9.2 %
- Moisture Absorption at Equilibrium: 2.6 %
- Viscosity Measurement: 220
$ 1452/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Tensile Strength, Yield: 29.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.00 GPa
$ 2044/MT
- Density: 1.09 g/cc
- Melt Flow: 4.0 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength, Yield: 33.0 MPa
- Elongation at Yield: 2.6 %
- Tensile Modulus: 1.79 GPa
$ 1988/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Tensile Strength, Yield: 29.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.00 GPa
$ 1446/MT
- Bulk Density: 0.640 - 0.740 g/cc
- Density: 1.12 - 1.15 g/cc
- Viscosity Measurement: 2.67 - 2.73
- Viscosity Measurement: 146 - 151
- Melting Point: 220 °C
$ 1485/MT
- Bulk Density: 0.700 - 0.800 g/cc
- Density: 1.234 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 0.30 %
- Viscosity Measurement: 72
$ 1844/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Tensile Strength, Yield: 29.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.00 GPa
$ 1504/MT
- Density: 0.910 g/cc
- Water Absorption: 0.10 %
- Moisture Absorption at Equilibrium: 0.10 %
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 35.0 MPa
$ 2186/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Tensile Strength, Yield: 29.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.00 GPa
$ 2400/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Tensile Strength, Yield: 29.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.00 GPa
$ 1735/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Tensile Strength, Yield: 29.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.00 GPa
$ 2381/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Tensile Strength, Yield: 29.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.00 GPa
$ 1907/MT
- Bulk Density: 0.500 - 0.800 g/cc
- Density: 1.41 g/cc
- Water Absorption: 5.9 - 6.5 %
- Moisture Absorption at Equilibrium: >= 2.0 %
- Moisture Absorption at Equilibrium: 1.8 - 2.2 %
$ 1563/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Tensile Strength, Yield: 29.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.00 GPa
$ 1754/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Tensile Strength, Yield: 29.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.00 GPa
$ 1662/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Tensile Strength, Yield: 29.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.00 GPa
$ 1450/MT
- Density: 1.29 g/cc
- Melt Flow: 258 g/10 min @Load 5.00 kg, Temperature 275 °C
- Tensile Strength, Yield: 35.0 MPa
- Elongation at Yield: 10 %
- Modulus of Elasticity: 1.10 GPa
$ 2102/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Tensile Strength, Yield: 29.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.00 GPa
$ 2119/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Tensile Strength, Yield: 29.0 MPa
- Elongation at Break: 20 %
- Tensile Modulus: 2.00 GPa
$ 1465/MT
- Density: 1.39 g/cc
- Moisture Absorption at Equilibrium: 1.1 %
- Moisture Absorption at Equilibrium: 1.8 %
- Moisture Absorption at Equilibrium: 6.4 %
- Linear Mold Shrinkage: 0.00762 cm/cm
Delivery Polymer BASF
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):| Country | 20’ Container | 40’ Container | 5,000 MT |
|---|---|---|---|
| 🇦🇺 Australia | $3345 | $4181 | $401400 |
| 🇦🇹 Austria | $2825 | $3531 | $339000 |
| 🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
| 🇦🇱 Albania | $2500 | $3125 | $300000 |
| 🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
| 🇦🇴 Angola | $2762.5 | $3453 | $331500 |
| 🇦🇷 Argentina | $3230 | $4038 | $387600 |
| 🇦🇲 Armenia | $2625 | $3281 | $315000 |
| 🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
| 🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
| 🇧🇭 Bahrain | $3095 | $3869 | $371400 |
| 🇧🇾 Belarus | $2825 | $3531 | $339000 |
| 🇧🇿 Belize | $3155 | $3944 | $378600 |
| 🇧🇪 Belgium | $2575 | $3219 | $309000 |
| 🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
| 🇧🇴 Bolivia | $3230 | $4038 | $387600 |
| 🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
| 🇧🇷 Brazil | $3120 | $3900 | $374400 |
| 🇭🇺 Hungary | $2575 | $3219 | $309000 |
| 🇻🇪 Venezuela | $3230 | $4038 | $387600 |
| 🇻🇳 Vietnam | $2625 | $3281 | $315000 |
| 🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
| 🇬🇹 Guatemala | $3230 | $4038 | $387600 |
| 🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
| 🇩🇪 Germany | $2475 | $3094 | $297000 |
| 🇭🇳 Honduras | $3230 | $4038 | $387600 |
| 🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
| 🇬🇷 Greece | $2575 | $3219 | $309000 |
| 🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
| 🇩🇰 Denmark | $2400 | $3000 | $288000 |
| 🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
| 🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
| 🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
| 🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
| 🇮🇱 Israel | $2625 | $3281 | $315000 |
| 🇮🇳 India | $3712.5 | $4641 | $445500 |
| 🇮🇩 Indonesia | $3095 | $3869 | $371400 |
| 🇯🇴 Jordan | $2625 | $3281 | $315000 |
| 🇮🇶 Iraq | $2625 | $3281 | $315000 |
| 🇮🇷 Iran | $3095 | $3869 | $371400 |
| 🇮🇪 Ireland | $2500 | $3125 | $300000 |
| 🇮🇸 Iceland | $2575 | $3219 | $309000 |
| 🇪🇸 Spain | $2500 | $3125 | $300000 |
| 🇮🇹 Italy | $2400 | $3000 | $288000 |
| 🇾🇪 Yemen | $2625 | $3281 | $315000 |
| 🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
| 🇰🇭 Cambodia | $3095 | $3869 | $371400 |
| 🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
| 🇨🇦 Canada | $3230 | $4038 | $387600 |
| 🇶🇦 Qatar | $2625 | $3281 | $315000 |
| 🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
| 🇨🇾 Cyprus | $2625 | $3281 | $315000 |
| 🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
| 🇨🇳 China | $3712.5 | $4641 | $445500 |
| 🇨🇴 Colombia | $3230 | $4038 | $387600 |
| 🇰🇷 Korea South | $2625 | $3281 | $315000 |
| 🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
| 🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
| 🇨🇺 Cuba | $3230 | $4038 | $387600 |
| 🇰🇼 Kuwait | $2625 | $3281 | $315000 |
| 🇱🇻 Latvia | $2575 | $3219 | $309000 |
| 🇱🇧 Lebanon | $2625 | $3281 | $315000 |
| 🇱🇾 Libya | $2762.5 | $3453 | $331500 |
| 🇱🇹 Lithuania | $2500 | $3125 | $300000 |
| 🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
| 🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
| 🇲🇾 Malaysia | $2625 | $3281 | $315000 |
| 🇲🇹 Malta | $2500 | $3125 | $300000 |
| 🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
| 🇲🇽 Mexico | $3155 | $3944 | $378600 |
| 🇲🇩 Moldova | $2400 | $3000 | $288000 |
| 🇲🇨 Monaco | $2475 | $3094 | $297000 |
| 🇲🇳 Mongolia | $2625 | $3281 | $315000 |
| 🇲🇲 Myanmar | $2625 | $3281 | $315000 |
| 🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
| 🇳🇵 Nepal | $2625 | $3281 | $315000 |
| 🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
| 🇳🇱 Netherlands | $2575 | $3219 | $309000 |
| 🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
| 🇳🇿 New Zealand | $3345 | $4181 | $401400 |
| 🇳🇴 Norway | $2400 | $3000 | $288000 |
| 🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
| 🇴🇲 Oman | $2625 | $3281 | $315000 |
| 🇵🇰 Pakistan | $2625 | $3281 | $315000 |
| 🇵🇦 Panama | $3230 | $4038 | $387600 |
| 🇵🇾 Paraguay | $3155 | $3944 | $378600 |
| 🇵🇪 Peru | $3230 | $4038 | $387600 |
| 🇵🇱 Poland | $2575 | $3219 | $309000 |
| 🇵🇹 Portugal | $2500 | $3125 | $300000 |
| 🇷🇺 Russia | $2575 | $3219 | $309000 |
| 🇷🇴 Romania | $2475 | $3094 | $297000 |
| 🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
| 🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
| 🇷🇸 Serbia | $2575 | $3219 | $309000 |
| 🇸🇬 Singapore | $3095 | $3869 | $371400 |
| 🇸🇾 Syria | $3095 | $3869 | $371400 |
| 🇸🇰 Slovakia | $2500 | $3125 | $300000 |
| 🇸🇮 Slovenia | $2500 | $3125 | $300000 |
| 🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
| 🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
| 🇺🇸 United States | $2902.5 | $3628 | $348300 |
| 🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
| 🇹🇭 Thailand | $2625 | $3281 | $315000 |
| 🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
| 🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
| 🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
| 🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
| 🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
| 🇹🇷 Turkey | $2625 | $3281 | $315000 |
| 🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
| 🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
| 🇺🇦 Ukraine | $2500 | $3125 | $300000 |
| 🇺🇾 Uruguay | $2675 | $3344 | $321000 |
| 🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
| 🇵🇭 Philippines | $2625 | $3281 | $315000 |
| 🇫🇮 Finland | $2500 | $3125 | $300000 |
| 🇫🇷 France | $2575 | $3219 | $309000 |
| 🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
| 🇲🇪 Montenegro | $2575 | $3219 | $309000 |
| 🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
| 🇨🇱 Chile | $3355 | $4194 | $402600 |
| 🇨🇭 Switzerland | $2575 | $3219 | $309000 |
| 🇸🇪 Sweden | $2500 | $3125 | $300000 |
| 🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
| 🇪🇨 Ecuador | $3155 | $3944 | $378600 |
| 🇦🇸 American Samoa | $3345 | $4181 | $401400 |
| 🇸🇻 El Salvador | $3230 | $4038 | $387600 |
| 🇪🇪 Estonia | $2575 | $3219 | $309000 |
| 🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
| 🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
| 🇯🇵 Japan | $3095 | $3869 | $371400 |
| 🇦🇩 Andorra | $2500 | $3125 | $300000 |
| 🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
| 🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
| 🇧🇧 Barbados | $3230 | $4038 | $387600 |
| 🇧🇹 Bhutan | $3095 | $3869 | $371400 |
| 🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
| 🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
| 🇧🇳 Brunei | $2625 | $3281 | $315000 |
| 🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
| 🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
| 🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
| 🇹🇩 Chad | $2762.5 | $3453 | $331500 |
| 🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
| 🇧🇯 Benin | $2762.5 | $3453 | $331500 |
| 🇩🇲 Dominica | $3230 | $4038 | $387600 |
| 🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
| 🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
| 🇫🇯 Fiji | $3345 | $4181 | $401400 |
| 🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
| 🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
| 🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
| 🇰🇮 Kiribati | $3345 | $4181 | $401400 |
| 🇬🇩 Grenada | $3355 | $4194 | $402600 |
| 🇬🇺 Guam | $3345 | $4181 | $401400 |
| 🇬🇾 Guyana | $3230 | $4038 | $387600 |
| 🇭🇹 Haiti | $3120 | $3900 | $374400 |
| 🇯🇲 Jamaica | $3230 | $4038 | $387600 |
| 🇰🇵 Korea, North | $2625 | $3281 | $315000 |
| 🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
| 🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
| 🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
| 🇲🇻 Maldives | $2625 | $3281 | $315000 |
| 🇲🇱 Mali | $2762.5 | $3453 | $331500 |
| 🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
| 🇨🇼 Curaçao | $3230 | $4038 | $387600 |
| 🇦🇼 Aruba | $3120 | $3900 | $374400 |
| 🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
| 🇳🇪 Niger | $2762.5 | $3453 | $331500 |
| 🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
| 🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
| 🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
| 🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
| 🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
| 🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
| 🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
| 🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
| 🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
| 🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
| 🇸🇲 San Marino | $2500 | $3125 | $300000 |
| 🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
| 🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
| 🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
| 🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
| 🇸🇷 Suriname | $3230 | $4038 | $387600 |
| 🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
| 🇹🇬 Togo | $2762.5 | $3453 | $331500 |
| 🇹🇴 Tonga | $3345 | $4181 | $401400 |
| 🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
| 🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
| 🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, commercial ships for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.
