$ 2056/MT
- Density: 1.35 g/cc
- Water Absorption at Saturation: 6.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.010 - 0.015 cm/cm
- Hardness, Rockwell R: 120
- Tensile Strength at Break: 80.0 MPa
$ 1807/MT
- Density: 1.45 g/cc
- Moisture Absorption: 0.0900 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0090 - 0.013 cm/cm
- Hardness, Rockwell L: 92
- Tensile Strength at Break: 75.0 MPa
$ 2120/MT
- Density: 1.64 g/cc
- Water Absorption: 1.0 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 150 MPa
- Elongation at Break: 2.5 %
$ 1974/MT
- Density: 1.39 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 2.4 %
- Flexural Strength: 195 MPa
$ 1554/MT
- Density: 1.31 g/cc
- Water Absorption at Saturation: 6.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm
- Tensile Strength at Break: 150 MPa
- Elongation at Break: 3.5 %
$ 2485/MT
- Density: 1.24 g/cc
- Linear Mold Shrinkage, Flow: 0.012 - 0.014 cm/cm
- Tensile Strength at Break: 69.0 MPa
- Elongation at Break: 3.1 %
- Flexural Strength: 102 MPa
$ 1774/MT
- Density: 1.29 g/cc
- Linear Mold Shrinkage, Flow: 0.011 - 0.013 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 65.0 MPa
- Elongation at Break: 5.0 %
- Tensile Modulus: 4.30 GPa
$ 1870/MT
- Density: 1.37 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Time 86400 sec
- Tensile Strength at Break: 70.0 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 6.20 GPa
$ 2057/MT
- Density: 1.46 g/cc
- Moisture Absorption: 0.900 % @Temperature 23.0 °C
- Water Absorption at Saturation: 3.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0025 cm/cm
- Hardness, Rockwell L: 114
$ 1748/MT
- Density: 1.42 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Time 86400 sec
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 8.10 GPa
$ 1518/MT
- Density: 1.41 g/cc
- Moisture Absorption: 1.10 % @Temperature 23.0 °C
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0015 - 0.0030 cm/cm
- Hardness, Rockwell L: 115
$ 2300/MT
- Density: 1.91 g/cc
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm
- Tensile Strength at Break: 18.0 MPa
- Elongation at Break: 25 %
- Tensile Modulus: 0.450 GPa
$ 1738/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 95.0 MPa
- Elongation at Break: >= 3.0 %
- Tensile Modulus: 5.80 GPa
$ 2114/MT
- Density: 1.00 g/cc
- Water Absorption: 0.010 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.016 cm/cm @Thickness 4.00 mm
- Melt Flow: 10 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: 25.0 MPa
$ 1620/MT
- Density: 1.00 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 60.0 MPa
- Elongation at Yield: 3.5 %
- Tensile Modulus: 3.80 GPa
$ 1670/MT
- Density: 1.37 g/cc
- Moisture Absorption: 1.80 % @Temperature 23.0 °C
- Water Absorption at Saturation: 6.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 - 0.011 cm/cm
$ 2056/MT
- Density: 1.46 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 189 MPa
- Elongation at Break: 2.3 %
- Flexural Strength: 276 MPa
$ 1876/MT
- Density: 1.58 g/cc
- Water Absorption at Saturation: 4.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm
- Hardness, Rockwell L: 108
- Tensile Strength at Break: 165 MPa
$ 1498/MT
- Density: 1.56 g/cc
- Moisture Absorption: 0.600 % @Temperature 23.0 °C
- Water Absorption at Saturation: 5.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Hardness, Rockwell R: 118
$ 1581/MT
- Density: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
- Tensile Strength at Break: 90.0 MPa
- Elongation at Break: 5.0 %
- Tensile Modulus: 4.80 GPa
$ 1604/MT
- Density: 1.58 g/cc
- Water Absorption at Saturation: 4.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm
- Hardness, Rockwell L: 108
- Tensile Strength at Break: 165 MPa
$ 2164/MT
- Density: 1.07 g/cc
- Moisture Absorption: 1.50 % @Temperature 23.0 °C
- Water Absorption at Saturation: 5.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.010 - 0.012 cm/cm
- Hardness, Rockwell R: 112
$ 1817/MT
- Density: 1.27 g/cc
- Moisture Absorption: 1.40 % @Temperature 23.0 °C
- Water Absorption at Saturation: 6.8 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0060 cm/cm
- Hardness, Rockwell L: 123
$ 1517/MT
- Density: 1.46 g/cc
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm
- Hardness, Rockwell L: 112
- Tensile Strength at Break: 90.0 MPa
- Elongation at Break: 6.0 %
$ 1545/MT
- Density: 1.47 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 9.80 GPa
$ 1612/MT
- Density: 1.56 g/cc
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm
- Tensile Strength at Break: 150 MPa
- Elongation at Break: 2.0 %
$ 1608/MT
- Density: 1.31 g/cc
- Water Absorption at Saturation: 6.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm
- Tensile Strength at Break: 150 MPa
- Elongation at Break: 3.5 %
$ 1617/MT
- Density: 1.01 g/cc
- Linear Mold Shrinkage, Flow: 0.013 - 0.015 cm/cm @Time 86400 sec
- Tensile Strength, Yield: 18.0 MPa
- Elongation at Break: >= 500 %
- Flexural Strength: 28.0 MPa
$ 2235/MT
- Density: 1.24 g/cc
- Water Absorption at Saturation: 5.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm
- Tensile Strength at Break: 70.0 MPa
- Elongation at Break: 3.0 %
$ 1474/MT
- Density: 0.960 g/cc
- Linear Mold Shrinkage, Flow: 0.015 - 0.020 cm/cm @Thickness 3.00 mm
- Melt Flow: 6.0 - 12 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: 35.0 MPa
- Elongation at Break: >= 9.0 %
$ 1627/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: >= 8.0 %
- Tensile Modulus: 3.60 GPa
$ 1677/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: >= 8.0 %
- Tensile Modulus: 3.60 GPa
$ 1652/MT
- Density: 1.42 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 165 MPa
- Elongation at Break: 2.0 %
- Flexural Strength: 219 MPa
$ 2069/MT
- Density: 1.10 g/cc
- Linear Mold Shrinkage, Flow: 0.015 - 0.020 cm/cm
- Tensile Strength at Break: 65.0 MPa
- Elongation at Break: 20 %
- Elongation at Yield: 4.5 %
$ 2370/MT
- Density: 1.55 g/cc
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 2.0 %
$ 1557/MT
- Density: 1.49 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 171 MPa
- Elongation at Break: 3.1 %
- Flexural Strength: 247 MPa
$ 1564/MT
- Density: 1.37 g/cc
- Moisture Absorption: 1.20 % @Temperature 23.0 °C
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Hardness, Rockwell L: 113
$ 1682/MT
- Density: 1.23 g/cc
- Water Absorption at Saturation: 8.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0045 - 0.0085 cm/cm
- Hardness, Rockwell L: 110
- Tensile Strength at Break: 125 MPa
$ 1836/MT
- Density: 1.37 g/cc
- Moisture Absorption: 1.30 % @Temperature 23.0 °C
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Hardness, Rockwell L: 113
$ 1489/MT
- Density: 1.37 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 133 MPa
- Elongation at Break: 2.0 %
- Flexural Strength: 188 MPa
$ 2443/MT
- Density: 1.14 g/cc
- Moisture Absorption: 2.00 % @Temperature 23.0 °C
- Water Absorption at Saturation: 8.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.016 - 0.020 cm/cm
- Hardness, Rockwell L: 118
$ 1696/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage, Flow: 0.017 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 35.0 MPa
- Elongation at Yield: 3.7 %
- Tensile Modulus: 1.40 GPa
$ 1607/MT
- Density: 1.37 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 2.7 %
- Tensile Modulus: 8.10 GPa
$ 1615/MT
- Density: 1.29 g/cc
- Water Absorption: 1.6 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0080 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 67.0 MPa
- Tensile Strength, Yield: 57.0 MPa
$ 2478/MT
- Density: 1.13 g/cc
- Moisture Absorption: 2.35 % @Temperature 23.0 °C
- Water Absorption at Saturation: 10 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.011 - 0.015 cm/cm
- Hardness, Rockwell R: 121
$ 1659/MT
- Density: 1.13 g/cc
- Moisture Absorption: 2.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.012 - 0.016 cm/cm
- Hardness, Rockwell R: 122
- Tensile Strength at Break: 80.0 MPa
$ 1606/MT
- Density: 1.42 g/cc
- Moisture Absorption: 1.60 % @Temperature 23.0 °C
- Water Absorption at Saturation: 6.2 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0015 - 0.0035 cm/cm
- Hardness, Rockwell L: 112
$ 1529/MT
- Density: 1.14 g/cc
- Moisture Absorption: 2.00 % @Temperature 23.0 °C
- Water Absorption at Saturation: 8.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.016 - 0.020 cm/cm
- Tensile Strength, Yield: 85.0 MPa
$ 2348/MT
- Density: 1.44 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0060 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 165 MPa
- Elongation at Break: 2.7 %
- Flexural Strength: 210 MPa
$ 2055/MT
- Density: 1.37 g/cc
- Moisture Absorption: 1.70 % @Temperature 23.0 °C
- Water Absorption at Saturation: 6.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Hardness, Rockwell L: 113
$ 1703/MT
- Density: 1.23 g/cc
- Water Absorption at Saturation: 7.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm
- Tensile Strength at Break: 125 MPa
- Elongation at Break: 3.0 %
$ 1771/MT
- Density: 1.47 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 68.0 MPa
- Elongation at Break: 1.5 %
- Flexural Yield Strength: 101 MPa
$ 1946/MT
- Density: 1.41 g/cc
- Moisture Absorption: 1.10 % @Temperature 23.0 °C
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0015 - 0.0030 cm/cm
- Hardness, Rockwell L: 115
$ 1692/MT
- Density: 1.56 g/cc
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm
- Tensile Strength at Break: 150 MPa
- Elongation at Break: 2.0 %
$ 1566/MT
- Density: 2.99 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 - 0.010 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 74.0 MPa
- Elongation at Break: 0.90 %
- Flexural Strength: 102 MPa
$ 1480/MT
- Density: 1.23 g/cc
- Linear Mold Shrinkage, Flow: 0.028 - 0.034 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 71.0 MPa
- Elongation at Break: 5.0 %
- Flexural Strength: 94.0 MPa
$ 1976/MT
- Density: 1.37 g/cc
- Moisture Absorption: 1.20 % @Temperature 23.0 °C
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Hardness, Rockwell L: 113
$ 1680/MT
- Density: 1.55 g/cc
- Moisture Absorption: 0.600 % @Temperature 23.0 °C
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm
- Tensile Strength at Break: 220 MPa
$ 2089/MT
- Density: 1.48 g/cc
- Water Absorption: 5.1 % @Temperature 23.0 °C, Time 86400 sec
- Moisture Absorption: 1.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 115 MPa
$ 2015/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.018 - 0.020 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 28.0 MPa
- Elongation at Break: 8.0 %
- Flexural Strength: 41.0 MPa
$ 1860/MT
- Density: 1.67 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
- Tensile Strength at Break: 95.0 MPa
- Tensile Modulus: 11.6 GPa
- Flexural Strength: 150 MPa
$ 1552/MT
- Density: 1.14 g/cc
- Moisture Absorption: 2.60 % @Temperature 23.0 °C
- Water Absorption at Saturation: 10 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.011 - 0.015 cm/cm
- Hardness, Rockwell R: 120
$ 2012/MT
- Density: 1.52 g/cc
- Water Absorption: 1.3 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 121 MPa
- Tensile Strength, Yield: 121 MPa
$ 1553/MT
- Density: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.016 - 0.018 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 74.0 MPa
- Elongation at Break: 7.3 %
- Flexural Yield Strength: 95.0 MPa
$ 1450/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage, Flow: 0.019 - 0.021 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.019 - 0.021 cm/cm @Time 86400 sec
- Tensile Strength at Break: 40.0 MPa
- Elongation at Break: 100 %
$ 2394/MT
- Density: 1.24 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 6.20 GPa
$ 1610/MT
- Density: 1.19 g/cc
- Tensile Strength at Break: 135 MPa
- Elongation at Break: 2.5 %
- Tensile Modulus: 8.00 GPa
- Flexural Yield Strength: 230 MPa
$ 2219/MT
- Density: 1.27 g/cc
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: >= 0.00080 cm/cm
- Hardness, Rockwell L: 108
- Tensile Strength at Break: 250 MPa
$ 1608/MT
- Density: 1.09 g/cc
- Tensile Strength, Yield: 16.0 MPa
- Elongation at Yield: 4.3 %
- Tensile Modulus: 1.40 GPa
- Flexural Yield Strength: 28.0 MPa
$ 1714/MT
- Density: 1.55 g/cc
- Water Absorption: 1.6 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.011 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 64.0 MPa
- Elongation at Break: 2.3 %
$ 1764/MT
- Density: 1.30 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0040 cm/cm @Thickness 4.00 mm
- Ash: 33 % @Temperature 650 °C
- Tensile Strength, Yield: 115 MPa
- Elongation at Break: 4.0 - 6.0 %
$ 2515/MT
- Density: 1.45 g/cc
- Linear Mold Shrinkage, Flow: 0.026 - 0.028 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Break: 30 %
- Flexural Strength: 53.0 MPa
$ 2396/MT
- Density: 1.07 g/cc
- Moisture Absorption: 1.50 % @Temperature 23.0 °C
- Water Absorption at Saturation: 5.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.019 - 0.021 cm/cm
- Hardness, Rockwell R: 112
$ 1887/MT
- Density: 1.08 g/cc
- Moisture Absorption: 1.60 % @Temperature 23.0 °C
- Water Absorption at Saturation: 6.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.013 - 0.020 cm/cm
- Hardness, Rockwell R: 108
$ 1655/MT
- Density: 1.14 g/cc
- Moisture Absorption: 2.00 % @Temperature 23.0 °C
- Water Absorption at Saturation: 8.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.016 - 0.020 cm/cm
- Hardness, Rockwell L: 118
$ 1550/MT
- Density: 1.06 g/cc
- Linear Mold Shrinkage, Flow: 0.014 - 0.018 cm/cm
- Hardness, Rockwell R: 110
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: >= 100 %
$ 1614/MT
- Density: 1.37 g/cc
- Moisture Absorption: 1.20 % @Temperature 23.0 °C
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Melt Flow: 25 - 50 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 1803/MT
- Density: 1.36 g/cc
- Moisture Absorption: 1.80 % @Temperature 23.0 °C
- Water Absorption at Saturation: 6.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Hardness, Rockwell L: 112
$ 2256/MT
- Density: 1.14 g/cc
- Moisture Absorption: 2.60 % @Temperature 23.0 °C
- Water Absorption at Saturation: 10 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.011 - 0.015 cm/cm
- Hardness, Rockwell R: 120
$ 1753/MT
- Density: 1.37 g/cc
- Water Absorption at Saturation: 6.5 % @Temperature 23.0 °C
- Hardness, Rockwell L: 105
- Tensile Strength at Break: 80.0 MPa
- Elongation at Break: 2.0 %
$ 1604/MT
- Density: 1.27 g/cc
- Linear Mold Shrinkage, Flow: 0.0034 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 110 MPa
- Tensile Strength, Yield: 117 MPa
- Elongation at Break: 3.0 %
$ 1476/MT
- Density: 1.21 g/cc
- Linear Mold Shrinkage, Flow: 0.024 - 0.030 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 69.0 MPa
- Elongation at Break: 8.0 %
- Flexural Strength: 89.0 MPa
$ 1521/MT
- Density: 0.960 g/cc
- Water Absorption: 0.070 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.020 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 32.0 MPa
- Elongation at Break: 34 %
$ 1926/MT
- Density: 1.01 g/cc
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 29.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.30 GPa
$ 1583/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage, Flow: 0.019 - 0.021 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: >= 50.0 MPa
- Tensile Strength, Yield: 45.0 MPa
- Flexural Yield Strength: 56.0 MPa
$ 2218/MT
- Density: 2.30 g/cc
- Linear Mold Shrinkage, Flow: 0.011 - 0.014 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 77.0 MPa
- Elongation at Break: 1.3 %
- Flexural Strength: 103 MPa
$ 1867/MT
- Density: 1.16 g/cc
- Linear Mold Shrinkage, Flow: 0.010 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 78.0 MPa
- Elongation at Break: 5.6 %
- Elongation at Yield: 3.7 %
$ 1452/MT
- Density: 1.40 g/cc
- Linear Mold Shrinkage, Flow: 0.027 - 0.033 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 56.0 MPa
- Elongation at Break: 45 %
- Flexural Strength: 68.0 MPa
$ 1760/MT
- Density: 1.10 g/cc
- Linear Mold Shrinkage, Flow: 0.012 - 0.016 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 30.0 MPa
- Elongation at Break: 40 %
- Tensile Modulus: 2.40 GPa
$ 1639/MT
- Density: 1.43 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 93.0 MPa
- Elongation at Break: 2.1 %
- Flexural Yield Strength: 136 MPa
$ 1859/MT
- Density: 1.47 g/cc
- Water Absorption: 1.1 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 131 MPa
- Elongation at Break: 2.6 %
$ 2085/MT
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 208 MPa
- Elongation at Break: 1.8 %
- Flexural Strength: 275 MPa
- Flexural Modulus: 16.0 GPa
$ 2040/MT
- Density: 1.13 g/cc
- Water Absorption: 0.010 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 56.0 MPa
- Elongation at Break: 2.5 %
$ 1698/MT
- Density: 1.01 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 48.0 MPa
- Elongation at Break: 1.0 %
- Flexural Yield Strength: 65.0 MPa
$ 1925/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm
- Tensile Strength at Break: 95.0 MPa
- Elongation at Break: 3.2 %
- Tensile Modulus: 6.20 GPa
$ 1445/MT
- Density: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
- Tensile Strength at Break: 87.0 MPa
- Elongation at Break: 2.7 %
- Flexural Strength: 129 MPa
$ 1770/MT
- Density: 1.41 g/cc
- Moisture Absorption: 1.10 % @Temperature 23.0 °C
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0015 - 0.0030 cm/cm
- Hardness, Rockwell L: 114
$ 1709/MT
- Density: 1.36 g/cc
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Yield: 2.5 %
- Tensile Modulus: 3.40 GPa
- Flexural Yield Strength: 83.0 MPa
$ 1716/MT
- Density: 1.27 g/cc
- Moisture Absorption: 1.40 % @Temperature 23.0 °C
- Water Absorption at Saturation: 6.8 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0060 cm/cm
- Hardness, Rockwell L: 123
$ 1594/MT
- Density: 1.91 g/cc
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm
- Tensile Strength at Break: 18.0 MPa
- Elongation at Break: 25 %
- Tensile Modulus: 0.450 GPa
$ 1837/MT
- Linear Mold Shrinkage, Flow: 0.013 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 14.0 MPa
- Elongation at Yield: 3.7 %
- Flexural Yield Strength: 23.0 MPa
- Flexural Modulus: 1.30 GPa
$ 2054/MT
- Density: 1.54 g/cc
- Water Absorption: 1.0 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.010 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 64.0 MPa
- Elongation at Break: 1.9 %
$ 1723/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 7.50 GPa
$ 1599/MT
- Density: 1.37 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Tensile Strength at Break: 165 MPa
- Elongation at Break: 5.0 %
- Tensile Modulus: 8.50 GPa
$ 2059/MT
- Density: 1.37 g/cc
- Water Absorption: 1.9 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0035 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 81.0 MPa
- Tensile Strength, Yield: 84.0 MPa
$ 1820/MT
- Density: 4.00 g/cc
- Linear Mold Shrinkage, Flow: 0.011 - 0.013 cm/cm @Thickness 4.00 mm
- Ash: 82 % @Temperature 650 °C
- Flexural Strength: 90.0 MPa
- Flexural Modulus: 5.40 GPa
$ 2446/MT
- Density: 1.17 g/cc
- Linear Mold Shrinkage, Flow: 0.0080 - 0.015 cm/cm @Time 86400 sec
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 5.0 %
- Tensile Modulus: 3.40 GPa
$ 2484/MT
- Density: 1.32 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Tensile Strength at Break: 110 MPa
- Elongation at Break: 5.0 %
- Tensile Modulus: 5.80 GPa
$ 1646/MT
- Density: 1.45 g/cc
- Linear Mold Shrinkage, Flow: 0.0035 - 0.0055 cm/cm
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 6.20 GPa
$ 1846/MT
- Density: 1.14 g/cc
- Water Absorption: 0.020 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 45.0 MPa
- Tensile Strength, Yield: 47.0 MPa
$ 1949/MT
- Density: 1.24 g/cc
- Water Absorption at Saturation: 5.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0015 cm/cm
- Tensile Strength at Break: 190 MPa
- Elongation at Break: 2.0 %
$ 2292/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage, Flow: 0.0080 - 0.0090 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 45.0 MPa
- Elongation at Break: >= 3.2 %
- Tensile Modulus: 6.20 GPa
$ 1975/MT
- Density: 1.54 g/cc
- Water Absorption at Saturation: 5.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 3.0 %
$ 1726/MT
- Density: 1.38 g/cc
- Moisture Absorption: 1.05 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Time 86400 sec
- Tensile Strength at Break: 82.0 MPa
- Tensile Strength at Break: 103 MPa
$ 1963/MT
- Density: 1.30 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 95.0 MPa
- Elongation at Break: 4.0 %
- Flexural Strength: 140 MPa
$ 1956/MT
- Density: 1.35 g/cc
- Water Absorption: 1.9 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0044 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 93.0 MPa
- Elongation at Break: 2.6 %
$ 1697/MT
- Density: 1.10 g/cc
- Linear Mold Shrinkage, Flow: 0.014 - 0.018 cm/cm
- Hardness, Rockwell R: 115
- Tensile Strength, Yield: 56.0 MPa
- Elongation at Break: >= 100 %
$ 1632/MT
- Density: 1.09 g/cc
- Linear Mold Shrinkage, Flow: 0.011 - 0.015 cm/cm @Time 86400 sec
- Tensile Strength at Break: 45.0 MPa
- Elongation at Break: 70 %
- Tensile Modulus: 2.20 GPa
$ 1699/MT
- Density: 1.56 g/cc
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 2.5 %
$ 1797/MT
- Density: 1.27 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Tensile Strength at Break: 46.0 MPa
- Elongation at Break: 1.0 %
- Tensile Modulus: 10.0 GPa
$ 1579/MT
- Density: 1.09 g/cc
- Water Absorption at Saturation: 5.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.010 - 0.012 cm/cm
- Hardness, Rockwell R: 110
- Tensile Strength, Yield: 60.0 MPa
$ 2120/MT
- Density: 1.14 g/cc
- Moisture Absorption: 2.60 % @Temperature 23.0 °C
- Water Absorption at Saturation: 10 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.011 - 0.015 cm/cm
- Hardness, Rockwell R: 120
$ 2144/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 95.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 4.00 GPa
$ 1492/MT
- Density: 1.66 g/cc
- Water Absorption: 0.80 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 63.0 MPa
- Elongation at Break: 1.5 %
$ 1730/MT
- Density: 1.14 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 90.0 MPa
- Elongation at Break: 1.0 %
- Tensile Modulus: 6.60 GPa
$ 1688/MT
- Density: 1.18 g/cc
- Moisture Absorption: 2.20 % @Temperature 23.0 °C
- Water Absorption at Saturation: 9.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0080 - 0.012 cm/cm
- Hardness, Rockwell R: 120
$ 2075/MT
- Density: 1.36 g/cc
- Moisture Absorption: 1.30 % @Temperature 23.0 °C
- Water Absorption at Saturation: 6.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Hardness, Rockwell L: 108
$ 1825/MT
- Density: 1.37 g/cc
- Water Absorption: 1.2 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Tensile Strength at Break: 147 MPa
- Elongation at Break: 3.4 %
$ 2245/MT
- Density: 1.21 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm
- Tensile Strength, Yield: 105 MPa
- Elongation at Yield: 3.0 %
- Tensile Modulus: 4.90 GPa
$ 1513/MT
- Density: 1.65 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm
- Tensile Strength at Break: 125 MPa
- Elongation at Break: 2.0 %
- Flexural Strength: 140 MPa
$ 1462/MT
- Density: 1.47 g/cc
- Linear Mold Shrinkage, Flow: 0.0015 - 0.0025 cm/cm
- Tensile Strength at Break: 195 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 13.5 GPa
$ 2284/MT
- Density: 1.37 g/cc
- Moisture Absorption: 1.80 % @Temperature 23.0 °C
- Water Absorption at Saturation: 6.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 - 0.011 cm/cm
$ 1527/MT
- Density: 1.34 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 84.0 MPa
- Elongation at Break: 2.2 %
- Tensile Modulus: 5.70 GPa
$ 1663/MT
- Density: 2.55 g/cc
- Elongation at Break: >= 5.0 %
- Elongation at Yield: 14 %
- Flexural Yield Strength: 28.0 MPa
- Flexural Modulus: 4.40 GPa
$ 1517/MT
- Density: 1.10 g/cc
- Water Absorption: 2.3 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.014 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Yield: 4.1 %
$ 1755/MT
- Density: 1.48 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 156 MPa
- Elongation at Break: 3.3 %
- Flexural Strength: 215 MPa
$ 2288/MT
- Density: 1.40 g/cc
- Tensile Strength at Break: 70.0 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 6.00 GPa
- Izod Impact, Notched (ISO): 2.00 kJ/m² @Temperature -40.0 °C
$ 1744/MT
- Density: 1.58 g/cc
- Moisture Absorption: 0.700 % @Temperature 23.0 °C
- Water Absorption at Saturation: 2.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0025 cm/cm
- Hardness, Rockwell L: 114
$ 1647/MT
- Density: 1.16 g/cc
- Water Absorption at Saturation: 6.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.016 - 0.020 cm/cm
- Hardness, Rockwell R: 117
- Elongation at Break: >= 30 %
$ 2133/MT
- Density: 1.43 g/cc
- Moisture Absorption: 1.10 % @Temperature 23.0 °C
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm
- Hardness, Rockwell L: 108
$ 1831/MT
- Density: 1.59 g/cc
- Water Absorption at Saturation: 4.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0025 - 0.0035 cm/cm
- Tensile Strength at Break: 115 MPa
- Elongation at Break: 2.0 %
$ 1841/MT
- Density: 1.37 g/cc
- Linear Mold Shrinkage, Flow: 0.010 - 0.014 cm/cm
- Tensile Strength at Break: 80.0 MPa
- Elongation at Break: 10 %
- Tensile Modulus: 5.50 GPa
$ 2596/MT
- Density: 1.37 g/cc
- Moisture Absorption: 1.20 % @Temperature 23.0 °C
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Hardness, Rockwell L: 114
$ 1492/MT
- Density: 1.55 g/cc
- Water Absorption at Saturation: 4.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0015 - 0.0030 cm/cm
- Tensile Strength at Break: 145 MPa
- Elongation at Break: 2.0 %
$ 1630/MT
- Density: 1.35 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
- Tensile Strength at Break: 140 MPa
- Izod Impact, Notched (ISO): 10.0 kJ/m²
- CTE, linear, Parallel to Flow: 18.0 µm/m-°C @Temperature 23.0 - 60.0 °C
$ 1593/MT
- Density: 1.23 g/cc
- Water Absorption at Saturation: 8.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0045 - 0.0085 cm/cm
- Hardness, Rockwell L: 110
- Tensile Strength at Break: 125 MPa
$ 1514/MT
- Density: 1.48 g/cc
- Water Absorption at Saturation: 5.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 2.5 %
$ 1544/MT
- Density: 1.17 g/cc
- Linear Mold Shrinkage, Flow: 0.0080 - 0.015 cm/cm
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 5.0 %
- Tensile Modulus: 3.40 GPa
$ 1453/MT
- Density: 1.11 g/cc
- Linear Mold Shrinkage, Flow: 0.023 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 44.0 MPa
- Tensile Strength, Yield: 60.0 MPa
- Elongation at Yield: 3.8 %
$ 2403/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.018 - 0.022 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 62.0 MPa
- Elongation at Break: 18 %
- Flexural Strength: 79.0 MPa
$ 1769/MT
- Density: 1.31 g/cc
- Water Absorption at Saturation: 6.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Tensile Strength at Break: 145 MPa
- Elongation at Break: 3.0 %
$ 2533/MT
- Density: 1.40 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 190 MPa
- Elongation at Break: 3.0 %
- Flexural Yield Strength: 265 MPa
$ 1863/MT
- Density: 1.00 g/cc
- Water Absorption: 0.050 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.023 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 17.0 MPa
- Tensile Strength, Yield: 26.0 MPa
$ 2000/MT
- Density: 1.39 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0090 - 0.013 cm/cm @Time 86400 sec
- Tensile Strength at Break: 145 MPa
- Elongation at Break: 3.0 %
$ 1446/MT
- Density: 1.15 g/cc
- Linear Mold Shrinkage, Flow: 0.018 - 0.022 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 70.0 MPa
- Elongation at Break: 3.5 %
- Flexural Strength: 91.0 MPa
$ 1455/MT
- Density: 1.37 g/cc
- Moisture Absorption: 1.30 % @Temperature 23.0 °C
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Hardness, Rockwell L: 113
$ 1557/MT
- Density: 1.20 g/cc
- Water Absorption at Saturation: 5.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0080 - 0.012 cm/cm
- Tensile Strength, Yield: 94.0 MPa
- Elongation at Break: 8.0 %
$ 1584/MT
- Density: 1.00 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.010 cm/cm @Thickness 4.00 mm
- Melt Flow: 6.7 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 40.0 MPa
- Elongation at Yield: 2.6 %
$ 1565/MT
- Density: 1.55 g/cc
- Moisture Absorption: 0.600 % @Temperature 23.0 °C
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm
- Tensile Strength at Break: 224 MPa
$ 1601/MT
- Density: 1.08 g/cc
- Moisture Absorption: 2.00 % @Temperature 23.0 °C
- Hardness, Rockwell R: 111
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Break: >= 100 %
$ 2467/MT
- Density: 1.48 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Tensile Strength at Break: 150 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 11.5 GPa
$ 1746/MT
- Density: 1.16 g/cc
- Linear Mold Shrinkage, Flow: 0.013 - 0.016 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 80.0 MPa
- Elongation at Yield: 4.0 %
- Flexural Yield Strength: 100 MPa
$ 1657/MT
- Density: 0.940 g/cc
- Water Absorption: 0.010 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.016 cm/cm @Thickness 4.00 mm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 23.0 MPa
$ 1666/MT
- Density: 1.19 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 4.00 mm
- Ash: 14 %
- Tensile Strength, Yield: 90.0 MPa
- Elongation at Break: 4.0 %
$ 1516/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 4.00 mm
- Melt Flow: 3.0 - 10 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: 50.0 MPa
- Elongation at Yield: 1.5 %
$ 1676/MT
- Density: 1.55 g/cc
- Moisture Absorption: 0.600 % @Temperature 23.0 °C
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 - 0.011 cm/cm
$ 2294/MT
- Density: 1.17 g/cc
- Water Absorption at Saturation: 6.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0095 - 0.0135 cm/cm
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 10 %
$ 1492/MT
- Density: 1.15 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm
- Tensile Strength at Break: 53.0 MPa
- Elongation at Break: 1.5 %
- Flexural Yield Strength: 70.0 MPa
$ 1793/MT
- Density: 1.23 g/cc
- Water Absorption: 0.0030 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 53.0 MPa
- Tensile Strength, Yield: 73.0 MPa
$ 1501/MT
- Density: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 170 MPa
- Elongation at Break: 2.3 %
- Flexural Strength: 221 MPa
$ 1737/MT
- Density: 1.37 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 175 MPa
- Elongation at Break: 2.7 %
- Flexural Strength: 175 MPa
$ 1545/MT
- Density: 1.16 g/cc
- Moisture Absorption: 1.30 % @Temperature 23.0 °C
- Water Absorption at Saturation: 6.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm
- Hardness, Rockwell L: 121
$ 1490/MT
- Density: 1.37 g/cc
- Water Absorption at Saturation: 5.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.011 - 0.015 cm/cm
- Tensile Strength at Break: 80.0 MPa
- Elongation at Break: 9.0 %
$ 1665/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 123 MPa
- Tensile Strength, Yield: 125 MPa
- Elongation at Break: 3.0 %
$ 2125/MT
- Density: 1.60 g/cc
- Tensile Strength at Break: 76.0 MPa
- Elongation at Break: 1.6 %
- Tensile Modulus: 8.70 GPa
- Flexural Strength: 118 MPa
$ 1640/MT
- Density: 1.10 g/cc
- Linear Mold Shrinkage, Flow: 0.014 - 0.016 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 40.0 MPa
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: 80 %
$ 1955/MT
- Density: 1.44 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 114 MPa
- Elongation at Break: 2.6 %
- Flexural Strength: 161 MPa
$ 2181/MT
- Density: 1.32 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm
- Tensile Strength at Break: 150 MPa
- Elongation at Break: 2.8 %
- Flexural Strength: 200 MPa
$ 1684/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm
- Ash: 30 % @Temperature 650 °C
- Tensile Strength, Yield: 160 MPa
- Elongation at Yield: 2.0 - 3.0 %
$ 1777/MT
- Density: 1.50 g/cc
- Melt Flow: 24 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 22.0 MPa
- Elongation at Break: 27 %
- Flexural Strength: 36.0 MPa
$ 2121/MT
- Density: 1.58 g/cc
- Moisture Absorption: 0.700 % @Temperature 23.0 °C
- Water Absorption at Saturation: 2.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0025 cm/cm
- Hardness, Rockwell L: 114
$ 2075/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Time 86400 sec
- Tensile Strength at Break: 90.0 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 6.40 GPa
$ 1741/MT
- Density: 1.47 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 4.00 mm
- Linear Mold Shrinkage, Transverse: 0.0070 - 0.011 cm/cm
- Tensile Strength at Break: 155 MPa
- Elongation at Break: 2.1 %
$ 1944/MT
- Density: 1.58 g/cc
- Moisture Absorption: 0.850 % @Temperature 23.0 °C
- Water Absorption at Saturation: 2.75 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0025 cm/cm
- Hardness, Rockwell L: 114
$ 1896/MT
- Density: 1.14 g/cc
- Moisture Absorption: 2.00 % @Temperature 23.0 °C
- Water Absorption at Saturation: 8.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.016 - 0.020 cm/cm
- Tensile Strength, Yield: 85.0 MPa
$ 1598/MT
- Density: 1.42 g/cc
- Moisture Absorption: 1.60 % @Temperature 23.0 °C
- Water Absorption at Saturation: 6.2 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0015 - 0.0035 cm/cm
- Hardness, Rockwell L: 112
$ 1732/MT
- Density: 1.32 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Tensile Strength at Break: 110 MPa
- Elongation at Break: 5.0 %
- Tensile Modulus: 5.80 GPa
$ 1444/MT
- Density: 1.16 g/cc
- Linear Mold Shrinkage, Flow: 0.010 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 78.0 MPa
- Elongation at Break: 5.6 %
- Elongation at Yield: 3.7 %
$ 1628/MT
- Density: 1.45 g/cc
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Tensile Strength, Yield: 70.0 MPa
- Elongation at Break: 10 %
- Tensile Modulus: 4.80 GPa
$ 1460/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 161 MPa
- Elongation at Break: 2.5 %
- Flexural Strength: 215 MPa
$ 1499/MT
- Density: 1.35 g/cc
- Water Absorption: 1.9 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0044 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 93.0 MPa
- Elongation at Break: 2.6 %
$ 1488/MT
- Density: 1.60 g/cc
- Moisture Absorption: 0.600 % @Temperature 23.0 °C
- Water Absorption at Saturation: 5.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm
- Hardness, Rockwell R: 118
$ 1654/MT
- Density: 1.35 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 200 MPa
- Elongation at Break: 1.5 %
- Flexural Strength: 245 MPa
$ 2436/MT
- Density: 1.35 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm
- Tensile Strength at Break: 138 MPa
- Elongation at Break: 5.0 %
- Tensile Modulus: 7.90 GPa
$ 1461/MT
- Density: 1.00 g/cc
- Moisture Absorption: 0.000 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 28.0 MPa
- Elongation at Yield: 3.6 %
$ 1525/MT
- Density: 1.37 g/cc
- Moisture Absorption: 1.80 % @Temperature 23.0 °C
- Water Absorption at Saturation: 6.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 - 0.011 cm/cm
$ 1868/MT
- Density: 1.35 g/cc
- Water Absorption at Saturation: 6.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.010 - 0.015 cm/cm
- Tensile Strength at Break: 65.0 MPa
- Elongation at Break: 10 %
$ 2534/MT
- Density: 1.16 g/cc
- Linear Mold Shrinkage, Flow: 0.010 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 78.0 MPa
- Elongation at Break: 5.6 %
- Elongation at Yield: 3.7 %
$ 2149/MT
- Density: 1.37 g/cc
- Moisture Absorption: 1.20 % @Temperature 23.0 °C
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Hardness, Rockwell L: 113
$ 1864/MT
- Density: 1.48 g/cc
- Linear Mold Shrinkage, Flow: 0.022 - 0.024 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Break: 13 %
- Flexural Strength: 64.0 MPa
$ 1456/MT
- Density: 1.26 g/cc
- Water Absorption at Saturation: 5.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm
- Hardness, Rockwell L: 112
- Tensile Strength at Break: 130 MPa
$ 1863/MT
- Density: 1.16 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 75.0 MPa
- Elongation at Break: 3.5 %
- Flexural Yield Strength: 90.0 MPa
$ 2404/MT
- Density: 1.16 g/cc
- Moisture Absorption: 2.20 % @Temperature 23.0 °C
- Water Absorption at Saturation: 9.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0080 - 0.012 cm/cm
- Hardness, Rockwell R: 120
$ 1790/MT
- Density: 1.46 g/cc
- Linear Mold Shrinkage, Flow: 0.024 - 0.027 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 52.0 MPa
- Elongation at Break: 19 %
- Flexural Strength: 62.0 MPa
$ 1575/MT
- Density: 1.34 g/cc
- Moisture Absorption: 1.20 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Hardness, Rockwell L: 110
- Tensile Strength at Break: 85.0 MPa
$ 1830/MT
- Density: 1.57 g/cc
- Water Absorption: 0.70 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 210 MPa
- Elongation at Break: 2.4 %
$ 1644/MT
- Density: 1.39 g/cc
- Water Absorption: 0.20 % @Temperature 23.0 °C, Time 86400 sec
- Moisture Absorption: 2.64 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.015 - 0.025 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.010 - 0.012 cm/cm @Time 86400 sec
$ 1483/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.012 cm/cm
- Tensile Strength, Yield: 25.0 MPa
- Elongation at Break: >= 20 %
- Tensile Modulus: 2.00 GPa
$ 1764/MT
- Density: 1.28 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0040 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 130 MPa
- Elongation at Break: >= 3.0 %
- Tensile Modulus: 7.00 GPa
$ 2494/MT
- Density: 1.26 g/cc
- Water Absorption at Saturation: 5.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm
- Hardness, Rockwell L: 112
- Tensile Strength at Break: 130 MPa
$ 1672/MT
- Density: 1.23 g/cc
- Linear Mold Shrinkage, Flow: 0.012 - 0.016 cm/cm
- Tensile Strength at Break: 80.0 MPa
- Tensile Strength, Yield: 75.0 MPa
- Elongation at Break: 4.0 %
$ 1622/MT
- Density: 1.55 g/cc
- Moisture Absorption: 0.600 % @Temperature 23.0 °C
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 - 0.011 cm/cm
$ 1779/MT
- Density: 1.36 g/cc
- Water Absorption: 3.0 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 170 MPa
- Elongation at Yield: 3.3 %
$ 1854/MT
- Density: 1.33 g/cc
- Moisture Absorption: 1.20 % @Temperature 23.0 °C
- Water Absorption at Saturation: 6.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Hardness, Rockwell L: 108
$ 1705/MT
- Density: 1.36 g/cc
- Tensile Strength, Yield: 141 MPa
- Elongation at Yield: 2.9 %
- Tensile Modulus: 9.00 GPa
- Flexural Yield Strength: 215 MPa
$ 1466/MT
- Density: 1.10 g/cc
- Water Absorption: 0.010 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.014 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 46.0 MPa
- Elongation at Yield: 5.0 %
$ 1841/MT
- Density: 1.15 g/cc
- Linear Mold Shrinkage, Flow: 0.013 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 57.0 MPa
- Tensile Strength, Yield: 69.0 MPa
- Elongation at Yield: 3.5 %
$ 2433/MT
- Density: 1.10 g/cc
- Linear Mold Shrinkage, Flow: 0.022 - 0.024 cm/cm @Thickness 4.00 mm
- Melt Flow: 8.7 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 24.0 MPa
- Elongation at Break: 15 %
$ 1585/MT
- Density: 1.23 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm @Thickness 3.00 mm
- Tensile Strength, Yield: 131 MPa
- Elongation at Break: 3.7 %
- Tensile Modulus: 5.70 GPa
$ 2000/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 68.0 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 5.70 GPa
$ 1619/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.019 cm/cm @Thickness 1.90 mm
- Tensile Strength at Break: 22.0 MPa
- Tensile Strength, Yield: 25.0 MPa
- Elongation at Yield: 4.8 %
$ 1605/MT
- Density: 1.19 g/cc
- Water Absorption at Saturation: 5.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm
- Hardness, Rockwell L: 105
- Tensile Strength at Break: 170 MPa
$ 1643/MT
- Density: 1.55 g/cc
- Moisture Absorption: 0.600 % @Temperature 23.0 °C
- Water Absorption at Saturation: 4.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 - 0.011 cm/cm
$ 1504/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.015 - 0.020 cm/cm
- Tensile Strength, Yield: 70.0 MPa
- Elongation at Break: >= 100 %
- Elongation at Yield: 3.8 %
$ 1979/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.015 - 0.020 cm/cm
- Tensile Strength, Yield: 70.0 MPa
- Elongation at Break: >= 100 %
- Elongation at Yield: 3.8 %
$ 1795/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.015 - 0.020 cm/cm
- Tensile Strength, Yield: 70.0 MPa
- Elongation at Break: >= 100 %
- Elongation at Yield: 3.8 %
$ 2233/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.015 - 0.020 cm/cm
- Tensile Strength, Yield: 70.0 MPa
- Elongation at Break: >= 100 %
- Elongation at Yield: 3.8 %
$ 1725/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.015 - 0.020 cm/cm
- Tensile Strength, Yield: 70.0 MPa
- Elongation at Break: >= 100 %
- Elongation at Yield: 3.8 %
$ 1982/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.015 - 0.020 cm/cm
- Tensile Strength, Yield: 70.0 MPa
- Elongation at Break: >= 100 %
- Elongation at Yield: 3.8 %
$ 1616/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.015 - 0.020 cm/cm
- Tensile Strength, Yield: 70.0 MPa
- Elongation at Break: >= 100 %
- Elongation at Yield: 3.8 %
$ 1589/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.015 - 0.020 cm/cm
- Tensile Strength, Yield: 70.0 MPa
- Elongation at Break: >= 100 %
- Elongation at Yield: 3.8 %
$ 1591/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.015 - 0.020 cm/cm
- Tensile Strength, Yield: 70.0 MPa
- Elongation at Break: >= 100 %
- Elongation at Yield: 3.8 %
$ 1928/MT
- Density: 1.17 g/cc
- Linear Mold Shrinkage, Flow: 0.014 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 18.0 MPa
- Elongation at Break: 1.0 %
- Tensile Modulus: 2.00 GPa
$ 1589/MT
- Density: 1.57 g/cc
- Water Absorption: 0.70 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 210 MPa
- Elongation at Break: 2.4 %
$ 1914/MT
- Density: 1.23 g/cc
- Water Absorption at Saturation: 7.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm
- Tensile Strength at Break: 125 MPa
- Elongation at Break: 3.0 %
$ 1786/MT
- Density: 1.45 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 155 MPa
- Elongation at Break: 3.0 %
- Flexural Strength: 195 MPa
$ 1817/MT
- Density: 1.40 g/cc
- Water Absorption: 2.2 % @Temperature 23.0 °C, Time 86400 sec
- Tensile Strength at Break: 44.0 MPa
- Elongation at Break: 6.7 %
- Elongation at Yield: 3.9 %
$ 1528/MT
- Density: 1.40 g/cc
- Water Absorption: 2.2 % @Temperature 23.0 °C, Time 86400 sec
- Tensile Strength at Break: 44.0 MPa
- Elongation at Break: 6.7 %
- Elongation at Yield: 3.9 %
$ 1519/MT
- Density: 1.34 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 93.0 MPa
- Elongation at Break: 2.5 %
- Flexural Yield Strength: 142 MPa
$ 2571/MT
- Density: 1.20 g/cc
- Moisture Absorption: 1.40 % @Temperature 23.0 °C
- Water Absorption at Saturation: 6.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm
- Hardness, H358/30: 101 MPa
$ 2058/MT
- Density: 1.39 g/cc
- Water Absorption: 0.040 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0015 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 144 MPa
- Elongation at Break: 1.1 %
$ 1902/MT
- Density: 1.14 g/cc
- Tensile Strength at Break: 88.0 MPa
- Elongation at Break: >= 5.0 %
- Flexural Strength: 130 MPa
- Flexural Modulus: 3.40 GPa
$ 1766/MT
- Density: 1.73 g/cc
- Water Absorption: 0.80 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Time 86400 sec
- Tensile Strength at Break: 94.0 MPa
- Elongation at Break: 1.5 - 2.5 %
$ 1764/MT
- Bulk Density: 0.750 g/cc
- Density: 1.67 g/cc
- Filler Content: 70 %
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Melting Point: 162 °C
$ 1813/MT
- Density: 1.02 g/cc
- Linear Mold Shrinkage, Flow: 0.018 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 29.0 MPa
- Elongation at Yield: 4.2 %
- Tensile Modulus: 2.30 GPa
$ 1730/MT
- Density: 1.42 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 170 MPa
- Elongation at Break: 2.5 %
- Flexural Strength: 240 MPa
$ 1498/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 5.80 GPa
$ 1535/MT
- Density: 1.06 g/cc
- Linear Mold Shrinkage, Flow: 0.018 cm/cm @Thickness 4.00 mm
- Tensile Strength at Break: 17.0 MPa
- Elongation at Break: 24 %
- Flexural Yield Strength: 26.0 MPa
$ 1549/MT
- Density: 1.21 g/cc
- Water Absorption at Saturation: 5.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0080 - 0.012 cm/cm
- Tensile Strength at Break: 90.0 MPa
- Elongation at Break: 10 %
$ 1465/MT
- Density: 1.50 g/cc
- Water Absorption: 0.90 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.010 cm/cm @Thickness 4.00 mm
- Tensile Strength, Yield: 71.0 MPa
- Elongation at Break: 2.7 %
Delivery Thermoplastic Eurostar Engineering Plastics
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):
Country | 20’ Container | 40’ Container | 5,000 MT |
🇦🇺 Australia | $3345 | $4181 | $401400 |
🇦🇹 Austria | $2825 | $3531 | $339000 |
🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
🇦🇱 Albania | $2500 | $3125 | $300000 |
🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
🇦🇴 Angola | $2762.5 | $3453 | $331500 |
🇦🇷 Argentina | $3230 | $4038 | $387600 |
🇦🇲 Armenia | $2625 | $3281 | $315000 |
🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
🇧🇭 Bahrain | $3095 | $3869 | $371400 |
🇧🇾 Belarus | $2825 | $3531 | $339000 |
🇧🇿 Belize | $3155 | $3944 | $378600 |
🇧🇪 Belgium | $2575 | $3219 | $309000 |
🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
🇧🇴 Bolivia | $3230 | $4038 | $387600 |
🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
🇧🇷 Brazil | $3120 | $3900 | $374400 |
🇭🇺 Hungary | $2575 | $3219 | $309000 |
🇻🇪 Venezuela | $3230 | $4038 | $387600 |
🇻🇳 Vietnam | $2625 | $3281 | $315000 |
🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
🇬🇹 Guatemala | $3230 | $4038 | $387600 |
🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
🇩🇪 Germany | $2475 | $3094 | $297000 |
🇭🇳 Honduras | $3230 | $4038 | $387600 |
🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
🇬🇷 Greece | $2575 | $3219 | $309000 |
🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
🇩🇰 Denmark | $2400 | $3000 | $288000 |
🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
🇮🇱 Israel | $2625 | $3281 | $315000 |
🇮🇳 India | $3712.5 | $4641 | $445500 |
🇮🇩 Indonesia | $3095 | $3869 | $371400 |
🇯🇴 Jordan | $2625 | $3281 | $315000 |
🇮🇶 Iraq | $2625 | $3281 | $315000 |
🇮🇷 Iran | $3095 | $3869 | $371400 |
🇮🇪 Ireland | $2500 | $3125 | $300000 |
🇮🇸 Iceland | $2575 | $3219 | $309000 |
🇪🇸 Spain | $2500 | $3125 | $300000 |
🇮🇹 Italy | $2400 | $3000 | $288000 |
🇾🇪 Yemen | $2625 | $3281 | $315000 |
🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
🇰🇭 Cambodia | $3095 | $3869 | $371400 |
🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
🇨🇦 Canada | $3230 | $4038 | $387600 |
🇶🇦 Qatar | $2625 | $3281 | $315000 |
🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
🇨🇾 Cyprus | $2625 | $3281 | $315000 |
🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
🇨🇳 China | $3712.5 | $4641 | $445500 |
🇨🇴 Colombia | $3230 | $4038 | $387600 |
🇰🇷 Korea South | $2625 | $3281 | $315000 |
🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
🇨🇺 Cuba | $3230 | $4038 | $387600 |
🇰🇼 Kuwait | $2625 | $3281 | $315000 |
🇱🇻 Latvia | $2575 | $3219 | $309000 |
🇱🇧 Lebanon | $2625 | $3281 | $315000 |
🇱🇾 Libya | $2762.5 | $3453 | $331500 |
🇱🇹 Lithuania | $2500 | $3125 | $300000 |
🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
🇲🇾 Malaysia | $2625 | $3281 | $315000 |
🇲🇹 Malta | $2500 | $3125 | $300000 |
🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
🇲🇽 Mexico | $3155 | $3944 | $378600 |
🇲🇩 Moldova | $2400 | $3000 | $288000 |
🇲🇨 Monaco | $2475 | $3094 | $297000 |
🇲🇳 Mongolia | $2625 | $3281 | $315000 |
🇲🇲 Myanmar | $2625 | $3281 | $315000 |
🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
🇳🇵 Nepal | $2625 | $3281 | $315000 |
🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
🇳🇱 Netherlands | $2575 | $3219 | $309000 |
🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
🇳🇿 New Zealand | $3345 | $4181 | $401400 |
🇳🇴 Norway | $2400 | $3000 | $288000 |
🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
🇴🇲 Oman | $2625 | $3281 | $315000 |
🇵🇰 Pakistan | $2625 | $3281 | $315000 |
🇵🇦 Panama | $3230 | $4038 | $387600 |
🇵🇾 Paraguay | $3155 | $3944 | $378600 |
🇵🇪 Peru | $3230 | $4038 | $387600 |
🇵🇱 Poland | $2575 | $3219 | $309000 |
🇵🇹 Portugal | $2500 | $3125 | $300000 |
🇷🇺 Russia | $2575 | $3219 | $309000 |
🇷🇴 Romania | $2475 | $3094 | $297000 |
🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
🇷🇸 Serbia | $2575 | $3219 | $309000 |
🇸🇬 Singapore | $3095 | $3869 | $371400 |
🇸🇾 Syria | $3095 | $3869 | $371400 |
🇸🇰 Slovakia | $2500 | $3125 | $300000 |
🇸🇮 Slovenia | $2500 | $3125 | $300000 |
🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
🇺🇸 United States | $2902.5 | $3628 | $348300 |
🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
🇹🇭 Thailand | $2625 | $3281 | $315000 |
🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
🇹🇷 Turkey | $2625 | $3281 | $315000 |
🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
🇺🇦 Ukraine | $2500 | $3125 | $300000 |
🇺🇾 Uruguay | $2675 | $3344 | $321000 |
🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
🇵🇭 Philippines | $2625 | $3281 | $315000 |
🇫🇮 Finland | $2500 | $3125 | $300000 |
🇫🇷 France | $2575 | $3219 | $309000 |
🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
🇲🇪 Montenegro | $2575 | $3219 | $309000 |
🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
🇨🇱 Chile | $3355 | $4194 | $402600 |
🇨🇭 Switzerland | $2575 | $3219 | $309000 |
🇸🇪 Sweden | $2500 | $3125 | $300000 |
🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
🇪🇨 Ecuador | $3155 | $3944 | $378600 |
🇦🇸 American Samoa | $3345 | $4181 | $401400 |
🇸🇻 El Salvador | $3230 | $4038 | $387600 |
🇪🇪 Estonia | $2575 | $3219 | $309000 |
🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
🇯🇵 Japan | $3095 | $3869 | $371400 |
🇦🇩 Andorra | $2500 | $3125 | $300000 |
🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
🇧🇧 Barbados | $3230 | $4038 | $387600 |
🇧🇹 Bhutan | $3095 | $3869 | $371400 |
🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
🇧🇳 Brunei | $2625 | $3281 | $315000 |
🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
🇹🇩 Chad | $2762.5 | $3453 | $331500 |
🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
🇧🇯 Benin | $2762.5 | $3453 | $331500 |
🇩🇲 Dominica | $3230 | $4038 | $387600 |
🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
🇫🇯 Fiji | $3345 | $4181 | $401400 |
🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
🇰🇮 Kiribati | $3345 | $4181 | $401400 |
🇬🇩 Grenada | $3355 | $4194 | $402600 |
🇬🇺 Guam | $3345 | $4181 | $401400 |
🇬🇾 Guyana | $3230 | $4038 | $387600 |
🇭🇹 Haiti | $3120 | $3900 | $374400 |
🇯🇲 Jamaica | $3230 | $4038 | $387600 |
🇰🇵 Korea, North | $2625 | $3281 | $315000 |
🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
🇲🇻 Maldives | $2625 | $3281 | $315000 |
🇲🇱 Mali | $2762.5 | $3453 | $331500 |
🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
🇨🇼 Curaçao | $3230 | $4038 | $387600 |
🇦🇼 Aruba | $3120 | $3900 | $374400 |
🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
🇳🇪 Niger | $2762.5 | $3453 | $331500 |
🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
🇸🇲 San Marino | $2500 | $3125 | $300000 |
🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
🇸🇷 Suriname | $3230 | $4038 | $387600 |
🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
🇹🇬 Togo | $2762.5 | $3453 | $331500 |
🇹🇴 Tonga | $3345 | $4181 | $401400 |
🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts,
used cruise ship for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.