$ 2291/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2595/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2524/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1834/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0400 %
- Water Absorption at Saturation: 0.090 %
- Linear Mold Shrinkage, Flow: 0.0025 - 0.0035 cm/cm @Thickness 3.20 mm
$ 1548/MT
- Density: 1.46 g/cc
- Density: 1.46 g/cc
- Moisture Absorption: 0.0400 %
- Moisture Absorption: 0.0800 %
- Linear Mold Shrinkage, Flow: 0.0038 cm/cm
$ 1456/MT
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 18 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1719/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1446/MT
- Density: 1.30 - 1.40 g/cc
- Moisture Absorption: <= 0.0800 %
- Tensile Strength at Break: >= 40.0 MPa
- Tensile Modulus: >= 3.80 GPa
- Flexural Modulus: >= 3.40 GPa
$ 2528/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption at Equilibrium: 0.16 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1938/MT
- Density: 1.21 g/cc
- Density: 1.24 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0035 cm/cm @Time 86400 sec
$ 1762/MT
- Specific Gravity: 1.19 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 62.0 MPa
- Elongation at Break: 160 %
$ 1841/MT
- Specific Gravity: 1.12 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Break: 200 %
$ 1582/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.18 g/cc
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 8.5 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1746/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1693/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.15 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1451/MT
- Density: 1.18 g/cc
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
$ 1957/MT
- Density: 1.26 g/cc
- Density: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
$ 2180/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 16.4 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 48.0 MPa
$ 1611/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1817/MT
- Specific Gravity: 1.33 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 107 MPa
- Elongation at Break: 7.0 %
$ 2051/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1650/MT
- Density: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Time 86400 sec
- Tensile Strength at Break: 65.0 MPa
- Elongation at Break: 2.8 %
$ 1566/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.120 %
- Water Absorption at Saturation: 0.24 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1634/MT
- Specific Gravity: 1.13 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2466/MT
- Density: 1.53 g/cc
- Density: 1.536 g/cc
- Water Absorption: 0.070 % @Temperature 23.0 °C, Time 86400 sec
- Water Absorption: 0.057 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.00060 - 0.0026 cm/cm @Time 86400 sec
$ 1676/MT
- Specific Gravity: 1.14 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 9.0 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1952/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.26 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0065 - 0.0075 cm/cm @Thickness 3.20 mm
$ 1754/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2107/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 2350/MT
- Specific Gravity: 1.14 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 59.0 MPa
- Elongation at Break: 75 %
$ 1962/MT
- Specific Gravity: 1.10 g/cc
- Density: 1.10 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1495/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.13 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1732/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2110/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Viscosity: 170000 cP @Temperature 260 °C
$ 2170/MT
- Density: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
$ 1468/MT
- Specific Gravity: 1.12 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2067/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1523/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1618/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.10 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1567/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2376/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1731/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1925/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.11 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0056 - 0.0063 cm/cm @Thickness 3.20 mm
$ 1505/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 10 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2002/MT
- Density: 1.21 g/cc
- Density: 1.24 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0035 cm/cm @Time 86400 sec
$ 2016/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 195000 cP
$ 1524/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
$ 1469/MT
- Density: 1.32 g/cc
- Melt Index of Compound: 8.0 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 2.5 %
- Tensile Modulus: 6.20 GPa
$ 1490/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1738/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Viscosity: 100000 cP @Temperature 260 °C
$ 1744/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1998/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.120 %
- Water Absorption at Saturation: 0.24 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1698/MT
- Density: 1.48 g/cc
- Water Absorption: 0.12 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0015 cm/cm
- Tensile Strength at Break: 124 MPa
- Elongation at Break: 1.9 %
$ 2025/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.35 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1955/MT
- Density: 1.25 g/cc
- Tensile Strength at Break: 112 MPa
- Elongation at Break: 2.5 %
- Tensile Modulus: 5.77 GPa
- Flexural Strength: 162 MPa
$ 2196/MT
- Density: 1.37 g/cc
- Density: 1.373 g/cc
- Water Absorption: 0.11 % @Temperature 23.0 °C, Time 86400 sec
- Water Absorption: 0.083 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.00060 - 0.0026 cm/cm @Time 86400 sec
$ 1452/MT
- Density: 1.29 g/cc
- Water Absorption at Saturation: 0.15 %
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Index of Compound: 17 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 86.0 MPa
$ 2167/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Viscosity: 170000 cP @Temperature 260 °C
$ 1671/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Tensile Strength, Yield: 54.0 MPa
- Elongation at Yield: 4.1 %
- Tensile Modulus: 2.90 GPa
$ 2152/MT
- Specific Gravity: 1.14 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 9.0 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1813/MT
- Specific Gravity: 1.26 g/cc
- Density: 1.25 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption: 0.0100 %
- Moisture Absorption: 0.0100 %
$ 1453/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 61.0 MPa
- Elongation at Break: 220 %
- Flexural Strength: 93.0 MPa
$ 1863/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
- Melt Index of Compound: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1939/MT
- Specific Gravity: 1.33 g/cc
- Water Absorption: 0.14 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.011 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.010 - 0.014 cm/cm @Thickness 2.30 - 4.60 mm
$ 1622/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1707/MT
- Density: 1.19 g/cc
- Moisture Absorption at Equilibrium: 0.070 %
- Water Absorption at Saturation: 0.29 % @Temperature 23.0 °C
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 51.0 MPa
$ 1972/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1736/MT
- Density: 1.25 g/cc
- Tensile Strength at Break: 112 MPa
- Elongation at Break: 2.5 %
- Tensile Modulus: 5.77 GPa
- Flexural Strength: 162 MPa
$ 1541/MT
- Density: 1.12 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1696/MT
- Density: 1.30 - 1.40 g/cc
- Moisture Absorption: <= 0.0800 %
- Tensile Strength at Break: >= 40.0 MPa
- Tensile Modulus: >= 3.80 GPa
- Flexural Modulus: >= 3.40 GPa
$ 2213/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1570/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 81 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 46.0 MPa
$ 1690/MT
- Density: 1.18 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1822/MT
- Specific Gravity: 1.14 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 2.5 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1678/MT
- Specific Gravity: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.00060 - 0.0015 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 25 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength at Break: 63.0 MPa
$ 1483/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.21 g/cc
- Melt Index of Compound: 8.0 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 49.0 MPa
- Tensile Strength at Break: 50.0 MPa
$ 2305/MT
- Specific Gravity: 1.29 g/cc
- Melt Flow: 16 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 93.0 MPa
- Tensile Strength, Yield: 92.0 MPa
- Elongation at Break: 2.6 %
$ 1567/MT
- Specific Gravity: 1.18 g/cc
- Specific Gravity: 1.19 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1952/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Viscosity: 170000 cP @Temperature 260 °C
$ 1629/MT
- Specific Gravity: 1.13 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.5 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: 120 %
$ 1504/MT
- Specific Gravity: 1.15 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 49.0 MPa
- Elongation at Break: 100 %
$ 1445/MT
- Specific Gravity: 1.24 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 60.0 MPa
- Elongation at Break: 140 %
$ 2042/MT
- Density: 1.12 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.70 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1549/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0044 - 0.0054 cm/cm @Thickness 3.20 mm
- Melt Flow: 21 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 48.0 MPa
- Tensile Strength, Yield: 63.0 MPa
$ 1515/MT
- Specific Gravity: 1.14 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 12 g/10 min @Load 3.80 kg, Temperature 260 °C
- Tensile Strength, Yield: 59.0 MPa
$ 1645/MT
- Density: 1.18 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1705/MT
- Specific Gravity: 1.26 g/cc
- Density: 1.25 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption: 0.0100 %
- Moisture Absorption: 0.0100 %
$ 1649/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1855/MT
- Density: 1.17 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 12 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1738/MT
- Melt Flow: 24 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 62.0 MPa
- Tensile Strength, Yield: 64.0 MPa
- Tensile Modulus: 2.92 GPa
- Flexural Yield Strength: 89.0 MPa
$ 1474/MT
- Specific Gravity: 1.16 g/cc
- Density: 1.16 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1739/MT
- Specific Gravity: 1.18 g/cc
- Specific Gravity: 1.22 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1514/MT
- Specific Gravity: 1.18 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 21 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1517/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2246/MT
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 2250/MT
- Specific Gravity: 1.18 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 34 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1582/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.13 g/cc
- Moisture Absorption at Equilibrium: 0.080 %
- Water Absorption at Saturation: 0.30 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0090 cm/cm @Thickness 3.20 mm
$ 2422/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 81 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 46.0 MPa
$ 2464/MT
- Specific Gravity: 1.10 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 14 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2176/MT
- Density: 1.15 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 2.0 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1476/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.18 g/cc
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 14 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 2600/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Moisture Absorption: 0.130 %
- Water Absorption at Saturation: 0.40 %
$ 1837/MT
- Density: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0041 cm/cm @Time 86400 sec
$ 1773/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.18 g/cc
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 11 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1491/MT
- Specific Gravity: 1.10 g/cc
- Density: 1.10 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1517/MT
- Specific Gravity: 1.19 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 50.0 MPa
- Tensile Strength, Yield: 63.0 MPa
$ 1659/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.170 %
- Moisture Absorption: 0.250 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
$ 2123/MT
- Specific Gravity: 1.18 g/cc
- Specific Gravity: 1.22 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1716/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2506/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 195000 cP
$ 1675/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 16 g/10 min @Load 5.00 kg, Temperature 260 °C
- Hardness, H358/30: 100 MPa
- Tensile Strength at Break: 55.0 MPa
$ 1915/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 195000 cP
$ 1817/MT
- Density: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0053 - 0.0065 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0053 - 0.0065 cm/cm @Time 86400 sec
- Tensile Strength at Break: 49.0 MPa
- Tensile Strength, Yield: 55.0 MPa
$ 1949/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1483/MT
- Specific Gravity: 1.19 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 21.5 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 45.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1501/MT
- Density: 1.49 g/cc
- Density: 1.50 g/cc
- Linear Mold Shrinkage, Flow: 0.00050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0027 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0030 cm/cm @Time 86400 sec
$ 1923/MT
- Density: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0041 cm/cm @Time 86400 sec
$ 2048/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1524/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1858/MT
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.12 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 11 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1468/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.00050 - 0.00070 cm/cm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.3 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1828/MT
- Specific Gravity: 1.16 g/cc
- Density: 1.16 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1765/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 44.0 MPa
$ 1488/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2459/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0400 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1573/MT
- Density: 1.33 g/cc
- Density: 1.33 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0059 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0064 cm/cm
$ 1525/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 51.0 MPa
- Tensile Strength, Yield: 62.0 MPa
$ 1971/MT
- Density: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.0500 %
- Linear Mold Shrinkage, Flow: 0.0069 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0061 cm/cm
$ 1555/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1537/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0300 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0033 cm/cm
$ 1800/MT
- Specific Gravity: 1.13 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.5 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: 120 %
$ 2122/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.11 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0056 - 0.0063 cm/cm @Thickness 3.20 mm
$ 2024/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2215/MT
- Density: 1.19 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 45.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1454/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 16.4 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 48.0 MPa
$ 1763/MT
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Melt Flow: 12 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2246/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1728/MT
- Specific Gravity: 1.24 g/cc
- Melt Flow: 13 g/10 min @Load 1.20 kg, Temperature 260 °C
- Tensile Strength at Break: 37.0 MPa
- Tensile Strength, Yield: 57.0 MPa
- Elongation at Break: 20 %
$ 1497/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Melt Flow: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 46.0 MPa
$ 1861/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1468/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 170000 cP
$ 1782/MT
- Density: 1.18 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1544/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 44.0 MPa
- Tensile Strength, Yield: 51.0 MPa
$ 2509/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1631/MT
- Density: 1.49 g/cc
- Density: 1.50 g/cc
- Linear Mold Shrinkage, Flow: 0.00050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0027 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0030 cm/cm @Time 86400 sec
$ 1819/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.13 g/cc
- Moisture Absorption: 0.120 %
- Water Absorption at Saturation: 0.39 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1920/MT
- Density: 1.21 g/cc
- Density: 1.24 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
$ 1713/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.010 %
- Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 2477/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.13 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1525/MT
- Specific Gravity: 1.19 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 55.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 2115/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 1584/MT
- Specific Gravity: 1.14 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 2.5 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1541/MT
- Specific Gravity: 1.27 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0025 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0045 cm/cm @Thickness 3.20 mm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 33 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1844/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1484/MT
- Specific Gravity: 1.25 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 95.0 MPa
$ 2013/MT
- Density: 1.19 g/cc
- Tensile Strength at Break: 62.0 MPa
- Elongation at Break: 3.4 %
- Tensile Modulus: 3.65 GPa
- Flexural Strength: 103 MPa
$ 2180/MT
- Specific Gravity: 1.16 g/cc
- Density: 1.16 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1575/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0400 %
- Water Absorption at Saturation: 0.090 %
- Linear Mold Shrinkage, Flow: 0.0025 - 0.0035 cm/cm @Thickness 3.20 mm
$ 1488/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2375/MT
- Density: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0053 - 0.0065 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0053 - 0.0065 cm/cm @Time 86400 sec
- Tensile Strength at Break: 49.0 MPa
- Tensile Strength, Yield: 55.0 MPa
$ 1676/MT
- Specific Gravity: 1.19 g/cc
- Water Absorption: 0.11 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 21.5 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 49.0 MPa
$ 2149/MT
- Density: 1.18 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 2554/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.30 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1974/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Viscosity: 195000 cP @Temperature 260 °C
$ 1865/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 16.4 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 48.0 MPa
$ 1614/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1798/MT
- Specific Gravity: 1.13 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 52.0 MPa
$ 1461/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 15 g/10 min @Load 5.00 kg, Temperature 260 °C
- Melt Index of Compound: 12 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 50.0 MPa
$ 1495/MT
- Density: 1.35 g/cc
- Linear Mold Shrinkage, Flow: 0.0042 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0045 cm/cm @Time 86400 sec
- Tensile Strength at Break: 47.0 MPa
- Tensile Strength, Yield: 58.0 MPa
$ 1469/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 12 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 51.0 MPa
$ 1806/MT
- Specific Gravity: 1.18 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1547/MT
- Density: 1.18 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.170 %
- Moisture Absorption: 0.250 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
$ 1937/MT
- Density: 1.19 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 16 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1856/MT
- Specific Gravity: 1.23 g/cc
- Density: 1.23 g/cc
- Moisture Absorption: 0.600 %
- Moisture Absorption: 0.900 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
$ 1839/MT
- Specific Gravity: 1.19 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Index of Compound: 16 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 49.0 MPa
$ 2247/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1734/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
- Melt Index of Compound: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1471/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2536/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1549/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 18 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 58.0 MPa
- Elongation at Break: 70 %
$ 1599/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.13 g/cc
- Moisture Absorption: 0.0200 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0090 cm/cm @Thickness 3.20 mm
$ 2109/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1475/MT
- Specific Gravity: 1.19 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 58.0 MPa
- Elongation at Break: 150 %
$ 1580/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1467/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2226/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1527/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 13.5 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Index of Compound: 14 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1865/MT
- Specific Gravity: 1.19 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Index of Compound: 16 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 49.0 MPa
$ 1889/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.060 %
- Water Absorption at Saturation: 0.26 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 2328/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.19 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1472/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 15 g/10 min @Load 5.00 kg, Temperature 260 °C
- Melt Index of Compound: 12 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 50.0 MPa
$ 2140/MT
- Specific Gravity: 1.25 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 50 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 50.0 MPa
$ 1597/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.13 g/cc
- Moisture Absorption at Equilibrium: 0.020 %
- Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1448/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Viscosity: 195000 cP @Temperature 260 °C
$ 1877/MT
- Specific Gravity: 1.15 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 19 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 57.0 MPa
- Elongation at Break: 100 %
$ 1890/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 14.5 g/10 min @Load 2.16 kg, Temperature 260 °C
- Spiral Flow: 68.58 cm @Temperature 260 °C
$ 1963/MT
- Density: 1.18 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1485/MT
- Specific Gravity: 1.15 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 19 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 57.0 MPa
- Elongation at Break: 100 %
$ 1912/MT
- Specific Gravity: 1.17 g/cc
- Specific Gravity: 1.18 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1919/MT
- Density: 1.12 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 14 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1758/MT
- Density: 1.35 g/cc
- Linear Mold Shrinkage, Flow: 0.0042 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0045 cm/cm @Time 86400 sec
- Tensile Strength at Break: 47.0 MPa
- Tensile Strength, Yield: 58.0 MPa
$ 1772/MT
- Specific Gravity: 1.13 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 8.5 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 55.0 MPa
$ 2015/MT
- Density: 1.13 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 20 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1851/MT
- Density: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
$ 1662/MT
- Specific Gravity: 1.20 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1479/MT
- Specific Gravity: 1.19 g/cc
- Water Absorption: 0.11 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 21.5 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 49.0 MPa
$ 1503/MT
- Density: 1.38 g/cc
- Water Absorption: 0.11 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Tensile Strength at Break: 65.0 MPa
- Tensile Strength, Yield: 67.0 MPa
$ 2342/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Viscosity: 100000 cP @Temperature 260 °C
$ 1930/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.26 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 2584/MT
- Specific Gravity: 1.39 g/cc
- Linear Mold Shrinkage, Flow: 0.00050 - 0.0015 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0015 - 0.0035 cm/cm @Thickness 3.20 mm
- Melt Flow: 22 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 36 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1859/MT
- Density: 1.15 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 19 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2020/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1896/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1546/MT
- Density: 1.25 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Tensile Strength, Yield: 45.0 MPa
- Elongation at Break: >= 10 %
- Flexural Yield Strength: 55.0 MPa
$ 2343/MT
- Specific Gravity: 1.27 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0025 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0045 cm/cm @Thickness 3.20 mm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 33 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 2523/MT
- Specific Gravity: 1.14 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 12 g/10 min @Load 3.80 kg, Temperature 260 °C
- Tensile Strength, Yield: 59.0 MPa
- Elongation at Break: 75 %
$ 1627/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.080 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 3.20 mm
$ 1508/MT
- Density: 1.30 g/cc
- Tensile Strength at Break: 61.0 MPa
- Elongation at Break: 7.8 %
- Flexural Strength: 99.0 MPa
- Flexural Modulus: 3.20 GPa
$ 1755/MT
- Specific Gravity: 1.10 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 14 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2199/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.10 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1714/MT
- Specific Gravity: 1.27 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0025 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0045 cm/cm @Thickness 3.20 mm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 33 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1469/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 37 g/10 min @Load 5.00 kg, Temperature 260 °C
- Hardness, Rockwell R: 121
$ 2491/MT
- Specific Gravity: 1.15 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 11.4 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 60.0 MPa
- Elongation at Break: 150 %
$ 1645/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Viscosity: 100000 cP @Temperature 260 °C
$ 2471/MT
- Density: 1.23 g/cc
- Density: 1.23 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0074 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0063 cm/cm
$ 1713/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.160 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1670/MT
- Specific Gravity: 1.25 g/cc
- Density: 1.26 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 2124/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Index of Compound: 21 g/10 min @Load 2.16 kg, Temperature 260 °C
- Hardness, H358/30: 110 MPa
$ 1616/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.35 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2047/MT
- Specific Gravity: 1.28 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 40.0 MPa
$ 1585/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.26 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0065 - 0.0075 cm/cm @Thickness 3.20 mm
$ 1890/MT
- Density: 1.20 g/cc
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 40.0 MPa
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Yield: 3.0 %
$ 2095/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.11 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0056 - 0.0063 cm/cm @Thickness 3.20 mm
$ 2572/MT
- Specific Gravity: 1.09 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Hardness, Rockwell R: 111
- Tensile Strength, Yield: 45.0 MPa
- Tensile Modulus: 2.41 GPa
$ 1634/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.10 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1514/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1468/MT
- Density: 1.26 g/cc
- Density: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
$ 1645/MT
- Density: 1.15 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 24 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2580/MT
- Density: 1.12 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.70 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 24 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1872/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 15 g/10 min @Load 5.00 kg, Temperature 260 °C
- Melt Index of Compound: 12 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 50.0 MPa
$ 1731/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 13.5 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Index of Compound: 14 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1609/MT
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 16 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2361/MT
- Density: 1.35 g/cc
- Linear Mold Shrinkage, Flow: 0.0042 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0045 cm/cm @Time 86400 sec
- Tensile Strength at Break: 47.0 MPa
- Tensile Strength, Yield: 58.0 MPa
$ 2123/MT
- Density: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
$ 1802/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 14.5 g/10 min @Load 2.16 kg, Temperature 260 °C
- Spiral Flow: 68.58 cm @Temperature 260 °C
$ 1780/MT
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 2380/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2576/MT
- Specific Gravity: 1.12 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2010/MT
- Specific Gravity: 1.17 g/cc
- Specific Gravity: 1.18 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1573/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
- Melt Index of Compound: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2224/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Viscosity: 170000 cP @Temperature 260 °C
$ 1705/MT
- Specific Gravity: 1.09 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Hardness, Rockwell R: 111
- Tensile Strength, Yield: 45.0 MPa
- Tensile Modulus: 2.41 GPa
$ 1982/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 21 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 44.0 MPa
$ 1764/MT
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1501/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 58.0 MPa
- Elongation at Break: 70 %
$ 1459/MT
- Specific Gravity: 1.18 g/cc
- Specific Gravity: 1.19 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1961/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 21 g/10 min @Load 2.16 kg, Temperature 260 °C
- Hardness, H358/30: 110 MPa
- Tensile Strength at Break: 45.0 MPa
$ 1476/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1650/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.30 %
$ 1572/MT
- Density: 1.25 g/cc
- Tensile Strength at Break: 95.0 MPa
- Tensile Strength at Break: 96.0 MPa
- Elongation at Break: 1.9 %
- Elongation at Yield: 1.9 %
$ 1889/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 2505/MT
- Density: 1.15 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 2477/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 170000 cP
$ 1571/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1923/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1483/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 51.0 MPa
- Tensile Strength, Yield: 62.0 MPa
$ 1906/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2297/MT
- Specific Gravity: 1.14 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 59.0 MPa
- Elongation at Break: 75 %
$ 2038/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1842/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1451/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.13 g/cc
- Melt Flow: 9.0 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 44.0 MPa
- Tensile Strength, Yield: 44.0 MPa
$ 2219/MT
- Density: 1.35 g/cc
- Density: 1.39 g/cc
- Moisture Absorption at Equilibrium: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0011 cm/cm @Time 86400 sec
$ 1586/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1859/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1811/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1953/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1527/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1781/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1448/MT
- Density: 1.29 g/cc
- Water Absorption at Saturation: 0.15 %
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Index of Compound: 17 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 86.0 MPa
$ 1715/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 2166/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.0400 %
- Water Absorption at Saturation: 0.090 %
- Linear Mold Shrinkage, Flow: 0.0035 - 0.0045 cm/cm @Thickness 3.20 mm
$ 2225/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1471/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1758/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2149/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Melt Index of Compound: 27 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 107 MPa
- Flexural Yield Strength: 113 MPa
$ 2303/MT
- Specific Gravity: 1.13 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 52.0 MPa
$ 1845/MT
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 2473/MT
- Specific Gravity: 1.23 g/cc
- Density: 1.22 g/cc
- Density: 1.23 g/cc
- Moisture Absorption: 0.130 %
- Moisture Absorption: 0.210 %
$ 1961/MT
- Specific Gravity: 1.33 g/cc
- Density: 1.33 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0059 cm/cm @Thickness 3.20 mm
$ 1601/MT
- Density: 1.26 g/cc
- Tensile Strength at Break: 49.0 MPa
- Tensile Strength, Yield: 56.0 MPa
- Elongation at Break: 5.0 %
- Elongation at Yield: 100 %
$ 1938/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Moisture Absorption: 0.130 %
- Water Absorption at Saturation: 0.40 %
$ 1642/MT
- Specific Gravity: 1.17 g/cc
- Density: 1.17 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0090 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.0090 cm/cm @Thickness 3.20 mm
- Melt Flow: 13 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 2092/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.00050 - 0.00070 cm/cm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.3 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1562/MT
- Specific Gravity: 1.22 g/cc
- Tensile Strength at Break: 51.0 MPa
- Tensile Strength, Yield: 62.0 MPa
- Elongation at Break: 110 %
- Flexural Yield Strength: 95.0 MPa
$ 1673/MT
- Density: 1.17 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1598/MT
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Melt Flow: 15 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1824/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 73.0 MPa
- Elongation at Break: 10 %
$ 1843/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 195000 cP
$ 1563/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm
- Tensile Strength, Yield: 66.0 MPa
- Elongation at Break: 50 %
$ 1828/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1958/MT
- Specific Gravity: 1.10 g/cc
- Density: 1.10 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1598/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.120 %
- Water Absorption at Saturation: 0.24 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2172/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1683/MT
- Density: 1.29 g/cc
- Water Absorption at Saturation: 0.15 %
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 94.0 MPa
- Elongation at Break: 3.0 %
$ 2124/MT
- Density: 1.45 g/cc
- Density: 1.453 g/cc
- Water Absorption: 0.090 % @Temperature 23.0 °C, Time 86400 sec
- Water Absorption: 0.088 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.00080 - 0.0028 cm/cm @Time 86400 sec
$ 2278/MT
- Specific Gravity: 1.39 g/cc
- Linear Mold Shrinkage, Flow: 0.00050 - 0.0015 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0015 - 0.0035 cm/cm @Thickness 3.20 mm
- Melt Flow: 22 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 36 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1638/MT
- Specific Gravity: 1.15 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 19 g/10 min @Load 5.00 kg, Temperature 260 °C
- Melt Index of Compound: 24 g/10 min @Load 5.00 kg, Temperature 265 °C
- Tensile Strength, Yield: 55.0 MPa
$ 1447/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1521/MT
- Density: 1.17 g/cc
- Moisture Absorption at Equilibrium: 0.12 %
- Water Absorption at Saturation: 0.43 % @Temperature 23.0 °C
- Melt Flow: 17 g/10 min @Load 5.00 kg, Temperature 265 °C
- Tensile Strength at Break: 46.0 MPa
$ 1784/MT
- Specific Gravity: 1.25 g/cc
- Moisture Absorption: 0.0200 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 13.5 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1849/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.30 %
$ 1567/MT
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Melt Flow: 33 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1915/MT
- Specific Gravity: 1.12 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1723/MT
- Density: 1.26 g/cc
- Water Absorption: 0.010 % @Time 86400 sec
- Moisture Absorption: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0065 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0056 cm/cm @Time 86400 sec
$ 1858/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.10 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 26 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 40.0 MPa
Delivery Polycarbonate/ABS Alloy SABIC Innovative Plastics (GE Plastics)
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):| Country | 20’ Container | 40’ Container | 5,000 MT |
|---|---|---|---|
| 🇦🇺 Australia | $3345 | $4181 | $401400 |
| 🇦🇹 Austria | $2825 | $3531 | $339000 |
| 🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
| 🇦🇱 Albania | $2500 | $3125 | $300000 |
| 🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
| 🇦🇴 Angola | $2762.5 | $3453 | $331500 |
| 🇦🇷 Argentina | $3230 | $4038 | $387600 |
| 🇦🇲 Armenia | $2625 | $3281 | $315000 |
| 🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
| 🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
| 🇧🇭 Bahrain | $3095 | $3869 | $371400 |
| 🇧🇾 Belarus | $2825 | $3531 | $339000 |
| 🇧🇿 Belize | $3155 | $3944 | $378600 |
| 🇧🇪 Belgium | $2575 | $3219 | $309000 |
| 🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
| 🇧🇴 Bolivia | $3230 | $4038 | $387600 |
| 🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
| 🇧🇷 Brazil | $3120 | $3900 | $374400 |
| 🇭🇺 Hungary | $2575 | $3219 | $309000 |
| 🇻🇪 Venezuela | $3230 | $4038 | $387600 |
| 🇻🇳 Vietnam | $2625 | $3281 | $315000 |
| 🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
| 🇬🇹 Guatemala | $3230 | $4038 | $387600 |
| 🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
| 🇩🇪 Germany | $2475 | $3094 | $297000 |
| 🇭🇳 Honduras | $3230 | $4038 | $387600 |
| 🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
| 🇬🇷 Greece | $2575 | $3219 | $309000 |
| 🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
| 🇩🇰 Denmark | $2400 | $3000 | $288000 |
| 🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
| 🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
| 🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
| 🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
| 🇮🇱 Israel | $2625 | $3281 | $315000 |
| 🇮🇳 India | $3712.5 | $4641 | $445500 |
| 🇮🇩 Indonesia | $3095 | $3869 | $371400 |
| 🇯🇴 Jordan | $2625 | $3281 | $315000 |
| 🇮🇶 Iraq | $2625 | $3281 | $315000 |
| 🇮🇷 Iran | $3095 | $3869 | $371400 |
| 🇮🇪 Ireland | $2500 | $3125 | $300000 |
| 🇮🇸 Iceland | $2575 | $3219 | $309000 |
| 🇪🇸 Spain | $2500 | $3125 | $300000 |
| 🇮🇹 Italy | $2400 | $3000 | $288000 |
| 🇾🇪 Yemen | $2625 | $3281 | $315000 |
| 🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
| 🇰🇭 Cambodia | $3095 | $3869 | $371400 |
| 🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
| 🇨🇦 Canada | $3230 | $4038 | $387600 |
| 🇶🇦 Qatar | $2625 | $3281 | $315000 |
| 🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
| 🇨🇾 Cyprus | $2625 | $3281 | $315000 |
| 🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
| 🇨🇳 China | $3712.5 | $4641 | $445500 |
| 🇨🇴 Colombia | $3230 | $4038 | $387600 |
| 🇰🇷 Korea South | $2625 | $3281 | $315000 |
| 🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
| 🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
| 🇨🇺 Cuba | $3230 | $4038 | $387600 |
| 🇰🇼 Kuwait | $2625 | $3281 | $315000 |
| 🇱🇻 Latvia | $2575 | $3219 | $309000 |
| 🇱🇧 Lebanon | $2625 | $3281 | $315000 |
| 🇱🇾 Libya | $2762.5 | $3453 | $331500 |
| 🇱🇹 Lithuania | $2500 | $3125 | $300000 |
| 🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
| 🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
| 🇲🇾 Malaysia | $2625 | $3281 | $315000 |
| 🇲🇹 Malta | $2500 | $3125 | $300000 |
| 🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
| 🇲🇽 Mexico | $3155 | $3944 | $378600 |
| 🇲🇩 Moldova | $2400 | $3000 | $288000 |
| 🇲🇨 Monaco | $2475 | $3094 | $297000 |
| 🇲🇳 Mongolia | $2625 | $3281 | $315000 |
| 🇲🇲 Myanmar | $2625 | $3281 | $315000 |
| 🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
| 🇳🇵 Nepal | $2625 | $3281 | $315000 |
| 🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
| 🇳🇱 Netherlands | $2575 | $3219 | $309000 |
| 🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
| 🇳🇿 New Zealand | $3345 | $4181 | $401400 |
| 🇳🇴 Norway | $2400 | $3000 | $288000 |
| 🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
| 🇴🇲 Oman | $2625 | $3281 | $315000 |
| 🇵🇰 Pakistan | $2625 | $3281 | $315000 |
| 🇵🇦 Panama | $3230 | $4038 | $387600 |
| 🇵🇾 Paraguay | $3155 | $3944 | $378600 |
| 🇵🇪 Peru | $3230 | $4038 | $387600 |
| 🇵🇱 Poland | $2575 | $3219 | $309000 |
| 🇵🇹 Portugal | $2500 | $3125 | $300000 |
| 🇷🇺 Russia | $2575 | $3219 | $309000 |
| 🇷🇴 Romania | $2475 | $3094 | $297000 |
| 🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
| 🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
| 🇷🇸 Serbia | $2575 | $3219 | $309000 |
| 🇸🇬 Singapore | $3095 | $3869 | $371400 |
| 🇸🇾 Syria | $3095 | $3869 | $371400 |
| 🇸🇰 Slovakia | $2500 | $3125 | $300000 |
| 🇸🇮 Slovenia | $2500 | $3125 | $300000 |
| 🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
| 🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
| 🇺🇸 United States | $2902.5 | $3628 | $348300 |
| 🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
| 🇹🇭 Thailand | $2625 | $3281 | $315000 |
| 🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
| 🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
| 🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
| 🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
| 🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
| 🇹🇷 Turkey | $2625 | $3281 | $315000 |
| 🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
| 🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
| 🇺🇦 Ukraine | $2500 | $3125 | $300000 |
| 🇺🇾 Uruguay | $2675 | $3344 | $321000 |
| 🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
| 🇵🇭 Philippines | $2625 | $3281 | $315000 |
| 🇫🇮 Finland | $2500 | $3125 | $300000 |
| 🇫🇷 France | $2575 | $3219 | $309000 |
| 🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
| 🇲🇪 Montenegro | $2575 | $3219 | $309000 |
| 🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
| 🇨🇱 Chile | $3355 | $4194 | $402600 |
| 🇨🇭 Switzerland | $2575 | $3219 | $309000 |
| 🇸🇪 Sweden | $2500 | $3125 | $300000 |
| 🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
| 🇪🇨 Ecuador | $3155 | $3944 | $378600 |
| 🇦🇸 American Samoa | $3345 | $4181 | $401400 |
| 🇸🇻 El Salvador | $3230 | $4038 | $387600 |
| 🇪🇪 Estonia | $2575 | $3219 | $309000 |
| 🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
| 🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
| 🇯🇵 Japan | $3095 | $3869 | $371400 |
| 🇦🇩 Andorra | $2500 | $3125 | $300000 |
| 🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
| 🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
| 🇧🇧 Barbados | $3230 | $4038 | $387600 |
| 🇧🇹 Bhutan | $3095 | $3869 | $371400 |
| 🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
| 🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
| 🇧🇳 Brunei | $2625 | $3281 | $315000 |
| 🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
| 🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
| 🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
| 🇹🇩 Chad | $2762.5 | $3453 | $331500 |
| 🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
| 🇧🇯 Benin | $2762.5 | $3453 | $331500 |
| 🇩🇲 Dominica | $3230 | $4038 | $387600 |
| 🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
| 🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
| 🇫🇯 Fiji | $3345 | $4181 | $401400 |
| 🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
| 🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
| 🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
| 🇰🇮 Kiribati | $3345 | $4181 | $401400 |
| 🇬🇩 Grenada | $3355 | $4194 | $402600 |
| 🇬🇺 Guam | $3345 | $4181 | $401400 |
| 🇬🇾 Guyana | $3230 | $4038 | $387600 |
| 🇭🇹 Haiti | $3120 | $3900 | $374400 |
| 🇯🇲 Jamaica | $3230 | $4038 | $387600 |
| 🇰🇵 Korea, North | $2625 | $3281 | $315000 |
| 🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
| 🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
| 🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
| 🇲🇻 Maldives | $2625 | $3281 | $315000 |
| 🇲🇱 Mali | $2762.5 | $3453 | $331500 |
| 🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
| 🇨🇼 Curaçao | $3230 | $4038 | $387600 |
| 🇦🇼 Aruba | $3120 | $3900 | $374400 |
| 🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
| 🇳🇪 Niger | $2762.5 | $3453 | $331500 |
| 🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
| 🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
| 🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
| 🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
| 🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
| 🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
| 🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
| 🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
| 🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
| 🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
| 🇸🇲 San Marino | $2500 | $3125 | $300000 |
| 🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
| 🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
| 🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
| 🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
| 🇸🇷 Suriname | $3230 | $4038 | $387600 |
| 🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
| 🇹🇬 Togo | $2762.5 | $3453 | $331500 |
| 🇹🇴 Tonga | $3345 | $4181 | $401400 |
| 🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
| 🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
| 🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, vessels for sale turkey. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.
