$ 2291/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2595/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2184/MT
- Specific Gravity: 1.04 g/cc
- Viscosity: 225000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.6 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 18 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2357/MT
- Density: 1.11 g/cc
- Density: 1.12 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0018 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0027 cm/cm @Time 86400 sec
$ 2524/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1834/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0400 %
- Water Absorption at Saturation: 0.090 %
- Linear Mold Shrinkage, Flow: 0.0025 - 0.0035 cm/cm @Thickness 3.20 mm
$ 1548/MT
- Density: 1.46 g/cc
- Density: 1.46 g/cc
- Moisture Absorption: 0.0400 %
- Moisture Absorption: 0.0800 %
- Linear Mold Shrinkage, Flow: 0.0038 cm/cm
$ 1456/MT
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 18 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1548/MT
- Density: 1.08 g/cc
- Tensile Strength at Break: 60.0 MPa
- Elongation at Break: 1.0 %
- Tensile Modulus: 7.40 GPa
- Flexural Strength: 45.0 MPa
$ 2506/MT
- Density: 1.06 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 25 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1719/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1823/MT
- Density: 1.05 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 16 g/10 min @Load 5.00 kg, Temperature 220 °C
$ 1611/MT
- Density: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0012 cm/cm
- Tensile Strength at Break: 82.0 MPa
- Elongation at Break: 1.4 %
- Tensile Modulus: 7.90 GPa
$ 1446/MT
- Density: 1.30 - 1.40 g/cc
- Moisture Absorption: <= 0.0800 %
- Tensile Strength at Break: >= 40.0 MPa
- Tensile Modulus: >= 3.80 GPa
- Flexural Modulus: >= 3.40 GPa
$ 1489/MT
- Density: 1.18 g/cc
- Tensile Strength at Break: 71.0 MPa
- Elongation at Break: 1.7 %
- Tensile Modulus: 6.00 GPa
- Flexural Strength: 77.0 MPa
$ 2528/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption at Equilibrium: 0.16 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1938/MT
- Density: 1.21 g/cc
- Density: 1.24 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0035 cm/cm @Time 86400 sec
$ 1762/MT
- Specific Gravity: 1.19 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 62.0 MPa
- Elongation at Break: 160 %
$ 1628/MT
- Density: 1.16 g/cc
- Density: 1.16 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Time 86400 sec
$ 1841/MT
- Specific Gravity: 1.12 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Break: 200 %
$ 1582/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.18 g/cc
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 8.5 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1746/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1963/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.170 %
- Moisture Absorption: 0.240 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1693/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.15 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1762/MT
- Specific Gravity: 1.08 g/cc
- Density: 1.08 g/cc
- Melt Flow: 19.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 47 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 123
$ 1451/MT
- Density: 1.18 g/cc
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
$ 1957/MT
- Density: 1.26 g/cc
- Density: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
$ 2180/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 16.4 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 48.0 MPa
$ 1611/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1817/MT
- Specific Gravity: 1.33 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 107 MPa
- Elongation at Break: 7.0 %
$ 1748/MT
- Density: 1.05 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1638/MT
- Density: 1.19 g/cc
- Density: 1.198 g/cc
- Moisture Absorption: 0.240 %
- Moisture Absorption: 0.390 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Time 86400 sec
$ 2051/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1650/MT
- Density: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Time 86400 sec
- Tensile Strength at Break: 65.0 MPa
- Elongation at Break: 2.8 %
$ 1566/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.120 %
- Water Absorption at Saturation: 0.24 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1634/MT
- Specific Gravity: 1.13 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2466/MT
- Density: 1.53 g/cc
- Density: 1.536 g/cc
- Water Absorption: 0.070 % @Temperature 23.0 °C, Time 86400 sec
- Water Absorption: 0.057 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.00060 - 0.0026 cm/cm @Time 86400 sec
$ 2498/MT
- Specific Gravity: 1.04 g/cc
- Viscosity: 225000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.6 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 18 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1676/MT
- Specific Gravity: 1.14 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 9.0 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1952/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.26 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0065 - 0.0075 cm/cm @Thickness 3.20 mm
$ 1754/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2006/MT
- Specific Gravity: 1.09 g/cc
- Density: 1.08 g/cc
- Moisture Absorption: 0.520 %
- Moisture Absorption: 0.800 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
$ 2107/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 1457/MT
- Density: 1.28 g/cc
- Density: 1.29 g/cc
- Moisture Absorption: 3.00 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
$ 2350/MT
- Specific Gravity: 1.14 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 59.0 MPa
- Elongation at Break: 75 %
$ 1962/MT
- Specific Gravity: 1.10 g/cc
- Density: 1.10 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1445/MT
- Specific Gravity: 1.04 g/cc
- Density: 1.06 g/cc
- Viscosity: 172000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 11.7 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1523/MT
- Specific Gravity: 1.04 g/cc
- Viscosity: 225000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.6 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 18 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2196/MT
- Specific Gravity: 1.04 g/cc
- Viscosity: 225000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.6 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 18 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1908/MT
- Density: 1.15 g/cc
- Density: 1.16 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0027 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
$ 2232/MT
- Specific Gravity: 1.04 g/cc
- Viscosity: 172000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 11.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 12 g/10 min @Load 5.00 kg, Temperature 220 °C
$ 1495/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.13 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1732/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2415/MT
- Specific Gravity: 1.17 g/cc
- Density: 1.17 g/cc
- Density: 1.175 g/cc
- Moisture Absorption: 0.220 %
- Moisture Absorption: 0.320 %
$ 2110/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Viscosity: 170000 cP @Temperature 260 °C
$ 2170/MT
- Density: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
$ 1468/MT
- Specific Gravity: 1.12 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1871/MT
- Density: 1.05 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 7.0 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2067/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1594/MT
- Specific Gravity: 0.950 g/cc
- Density: 0.960 g/cc
- Volatiles: 0.20 %
- Particle Size: 200 µm
- Hardness, Shore D: 40
- BD: 70%
$ 1523/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2364/MT
- Density: 1.13 g/cc
- Density: 1.13 g/cc
- Moisture Absorption: 0.200 %
- Moisture Absorption: 0.310 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Time 86400 sec
$ 1618/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.10 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1567/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2376/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1731/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1925/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.11 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0056 - 0.0063 cm/cm @Thickness 3.20 mm
$ 2144/MT
- Specific Gravity: 1.17 g/cc
- Viscosity: 350000 cP @Temperature 200 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.3 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 7.0 g/10 min @Load 5.00 kg, Temperature 220 °C
$ 1595/MT
- Density: 1.11 g/cc
- Density: 1.119 g/cc
- Moisture Absorption: 0.220 %
- Moisture Absorption: 0.330 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
$ 1622/MT
- Density: 2.30 g/cc
- Density: 2.30 g/cc
- Moisture Absorption: 0.160 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Time 86400 sec
$ 1505/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 10 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2002/MT
- Density: 1.21 g/cc
- Density: 1.24 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0035 cm/cm @Time 86400 sec
$ 2448/MT
- Specific Gravity: 1.45 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0070 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 94.0 MPa
- Elongation at Break: 8.0 %
$ 1709/MT
- Specific Gravity: 1.05 g/cc
- Viscosity: 245000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 3.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 15 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2016/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 195000 cP
$ 1720/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Tensile Strength at Break: 32.0 MPa
- Elongation at Break: 3.9 %
- Flexural Strength: 58.0 MPa
$ 1524/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
$ 1469/MT
- Density: 1.32 g/cc
- Melt Index of Compound: 8.0 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 2.5 %
- Tensile Modulus: 6.20 GPa
$ 1490/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1669/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 20.6 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength at Break: 39.0 MPa
- Tensile Strength, Yield: 48.0 MPa
$ 1738/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Viscosity: 100000 cP @Temperature 260 °C
$ 1744/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1998/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.120 %
- Water Absorption at Saturation: 0.24 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1698/MT
- Density: 1.48 g/cc
- Water Absorption: 0.12 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0015 cm/cm
- Tensile Strength at Break: 124 MPa
- Elongation at Break: 1.9 %
$ 2025/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.35 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1557/MT
- Density: 1.09 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm @Time 86400 sec
- Tensile Strength at Break: 54.0 MPa
- Elongation at Break: 2.1 %
- Tensile Modulus: 4.34 GPa
$ 1938/MT
- Specific Gravity: 1.05 g/cc
- Viscosity: 245000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 3.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 15 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1908/MT
- Specific Gravity: 1.04 g/cc
- Viscosity: 225000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.6 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Index of Compound: 18 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1955/MT
- Density: 1.25 g/cc
- Tensile Strength at Break: 112 MPa
- Elongation at Break: 2.5 %
- Tensile Modulus: 5.77 GPa
- Flexural Strength: 162 MPa
$ 2196/MT
- Density: 1.37 g/cc
- Density: 1.373 g/cc
- Water Absorption: 0.11 % @Temperature 23.0 °C, Time 86400 sec
- Water Absorption: 0.083 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.00060 - 0.0026 cm/cm @Time 86400 sec
$ 1452/MT
- Density: 1.29 g/cc
- Water Absorption at Saturation: 0.15 %
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Index of Compound: 17 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 86.0 MPa
$ 2167/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Viscosity: 170000 cP @Temperature 260 °C
$ 1671/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Tensile Strength, Yield: 54.0 MPa
- Elongation at Yield: 4.1 %
- Tensile Modulus: 2.90 GPa
$ 2367/MT
- Specific Gravity: 1.05 g/cc
- Viscosity: 245000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 3.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 15 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2152/MT
- Specific Gravity: 1.14 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 9.0 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1813/MT
- Specific Gravity: 1.26 g/cc
- Density: 1.25 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption: 0.0100 %
- Moisture Absorption: 0.0100 %
$ 1453/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 61.0 MPa
- Elongation at Break: 220 %
- Flexural Strength: 93.0 MPa
$ 1776/MT
- Density: 1.10 g/cc
- Density: 1.111 g/cc
- Moisture Absorption: 0.380 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0041 cm/cm @Time 86400 sec
$ 2323/MT
- Density: 1.05 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 25 g/10 min @Load 5.00 kg, Temperature 220 °C
$ 1863/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
- Melt Index of Compound: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1560/MT
- Specific Gravity: 1.17 g/cc
- Viscosity: 310000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.8 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 9.0 g/10 min @Load 5.00 kg, Temperature 220 °C
$ 1939/MT
- Specific Gravity: 1.33 g/cc
- Water Absorption: 0.14 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.011 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.010 - 0.014 cm/cm @Thickness 2.30 - 4.60 mm
$ 1622/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1707/MT
- Density: 1.19 g/cc
- Moisture Absorption at Equilibrium: 0.070 %
- Water Absorption at Saturation: 0.29 % @Temperature 23.0 °C
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 51.0 MPa
$ 1972/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1609/MT
- Specific Gravity: 1.08 g/cc
- Density: 1.07 g/cc
- Melt Flow: 37.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 98 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 122
$ 1736/MT
- Density: 1.25 g/cc
- Tensile Strength at Break: 112 MPa
- Elongation at Break: 2.5 %
- Tensile Modulus: 5.77 GPa
- Flexural Strength: 162 MPa
$ 1621/MT
- Specific Gravity: 1.46 g/cc
- Density: 1.45 g/cc
- Moisture Absorption: 0.260 %
- Moisture Absorption: 0.470 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Time 86400 sec
$ 2162/MT
- Specific Gravity: 1.21 g/cc
- Density: 1.21 g/cc
- Moisture Absorption: 0.180 %
- Moisture Absorption: 0.330 %
- Linear Mold Shrinkage, Flow: 0.00020 - 0.00040 cm/cm @Time 86400 sec
$ 1541/MT
- Density: 1.12 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 2350/MT
- Specific Gravity: 1.05 g/cc
- Viscosity: 155000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 3.3 g/10 min @Load 3.80 kg, Temperature 230 °C
- Spiral Flow: 86.36 cm @Temperature 260 °C
$ 1871/MT
- Density: 1.05 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 3.0 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1696/MT
- Density: 1.30 - 1.40 g/cc
- Moisture Absorption: <= 0.0800 %
- Tensile Strength at Break: >= 40.0 MPa
- Tensile Modulus: >= 3.80 GPa
- Flexural Modulus: >= 3.40 GPa
$ 1627/MT
- Density: 1.04 g/cc
- Moisture Absorption: 0.160 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 39 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 129
$ 2473/MT
- Density: 1.07 g/cc
- Tensile Strength at Break: 29.0 MPa
- Tensile Strength, Yield: 38.0 MPa
- Elongation at Break: 21 %
- Elongation at Yield: 3.1 %
$ 2213/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1570/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 81 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 46.0 MPa
$ 1444/MT
- Density: 1.17 g/cc
- Density: 1.17 g/cc
- Moisture Absorption: 0.220 %
- Moisture Absorption: 0.320 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm @Time 86400 sec
$ 1690/MT
- Density: 1.18 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1822/MT
- Specific Gravity: 1.14 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 2.5 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1678/MT
- Specific Gravity: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.00060 - 0.0015 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 25 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength at Break: 63.0 MPa
$ 1483/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.21 g/cc
- Melt Index of Compound: 8.0 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 49.0 MPa
- Tensile Strength at Break: 50.0 MPa
$ 1484/MT
- Density: 1.27 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Tensile Strength at Break: 64.0 MPa
- Elongation at Break: 2.5 %
- Tensile Modulus: 4.20 GPa
$ 1861/MT
- Specific Gravity: 1.07 g/cc
- Density: 1.07 g/cc
- Flexural Yield Strength: 33.0 MPa
- Flexural Yield Strength: 38.0 MPa
- Flexural Modulus: 3.40 GPa
$ 2305/MT
- Specific Gravity: 1.29 g/cc
- Melt Flow: 16 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 93.0 MPa
- Tensile Strength, Yield: 92.0 MPa
- Elongation at Break: 2.6 %
$ 1567/MT
- Specific Gravity: 1.18 g/cc
- Specific Gravity: 1.19 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1952/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Viscosity: 170000 cP @Temperature 260 °C
$ 2091/MT
- Specific Gravity: 1.08 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 2.0 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength, Yield: 60.0 MPa
- Elongation at Break: 16 %
$ 1629/MT
- Specific Gravity: 1.13 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.5 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: 120 %
$ 1571/MT
- Specific Gravity: 1.09 g/cc
- Density: 1.08 g/cc
- Moisture Absorption: 0.540 %
- Moisture Absorption: 0.810 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Time 86400 sec
$ 1504/MT
- Specific Gravity: 1.15 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 49.0 MPa
- Elongation at Break: 100 %
$ 1445/MT
- Specific Gravity: 1.24 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 60.0 MPa
- Elongation at Break: 140 %
$ 1620/MT
- Density: 1.32 g/cc
- Moisture Absorption: 0.110 %
- Moisture Absorption: 0.170 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Time 86400 sec
$ 1889/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage, Flow: 0.023 cm/cm @Time 86400 sec
- Tensile Strength at Break: 58.0 MPa
- Elongation at Break: 2.1 %
- Tensile Modulus: 4.26 GPa
$ 2042/MT
- Density: 1.12 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.70 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2487/MT
- Specific Gravity: 1.08 g/cc
- Density: 1.07 g/cc
- Melt Flow: 37.8 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 78 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 123
$ 2547/MT
- Specific Gravity: 1.04 g/cc
- Density: 1.06 g/cc
- Moisture Absorption: 0.160 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1549/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0044 - 0.0054 cm/cm @Thickness 3.20 mm
- Melt Flow: 21 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 48.0 MPa
- Tensile Strength, Yield: 63.0 MPa
$ 2443/MT
- Specific Gravity: 1.05 g/cc
- Viscosity: 245000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 3.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 15 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1515/MT
- Specific Gravity: 1.14 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 12 g/10 min @Load 3.80 kg, Temperature 260 °C
- Tensile Strength, Yield: 59.0 MPa
$ 1470/MT
- Specific Gravity: 1.09 g/cc
- Density: 1.09 g/cc
- Melt Flow: 10.9 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 21 g/10 min @Load 10.0 kg, Temperature 220 °C
- Flexural Yield Strength: 58.0 MPa
$ 1645/MT
- Density: 1.18 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1705/MT
- Specific Gravity: 1.26 g/cc
- Density: 1.25 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption: 0.0100 %
- Moisture Absorption: 0.0100 %
$ 1649/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1855/MT
- Density: 1.17 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 12 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1497/MT
- Density: 1.16 g/cc
- Density: 1.16 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Time 86400 sec
$ 1538/MT
- Density: 1.13 g/cc
- Density: 1.13 g/cc
- Moisture Absorption: 0.200 %
- Moisture Absorption: 0.310 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Time 86400 sec
$ 1619/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
- Melt Flow: 16 g/10 min @Load 5.00 kg, Temperature 220 °C
$ 1738/MT
- Melt Flow: 24 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 62.0 MPa
- Tensile Strength, Yield: 64.0 MPa
- Tensile Modulus: 2.92 GPa
- Flexural Yield Strength: 89.0 MPa
$ 1474/MT
- Specific Gravity: 1.16 g/cc
- Density: 1.16 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1739/MT
- Specific Gravity: 1.18 g/cc
- Specific Gravity: 1.22 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1535/MT
- Specific Gravity: 1.03 g/cc
- Viscosity: 1.52e+6 cP
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 4.0 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength at Break: 28.0 MPa
$ 1514/MT
- Specific Gravity: 1.18 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 21 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1517/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2246/MT
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 2250/MT
- Specific Gravity: 1.18 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 34 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1582/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.13 g/cc
- Moisture Absorption at Equilibrium: 0.080 %
- Water Absorption at Saturation: 0.30 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0090 cm/cm @Thickness 3.20 mm
$ 2422/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 81 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 46.0 MPa
$ 1459/MT
- Density: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.240 %
- Moisture Absorption: 0.390 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Time 86400 sec
$ 2464/MT
- Specific Gravity: 1.10 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 14 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2176/MT
- Density: 1.15 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 2.0 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2130/MT
- Specific Gravity: 1.08 g/cc
- Density: 1.08 g/cc
- Melt Flow: 5.8 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 16 g/10 min @Load 10.0 kg, Temperature 220 °C
- Flexural Yield Strength: 92.0 MPa
$ 1476/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.18 g/cc
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 14 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 2148/MT
- Density: 1.06 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 8.0 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1501/MT
- Specific Gravity: 1.05 g/cc
- Viscosity: 255000 cP @Temperature 240 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 16 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2600/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Moisture Absorption: 0.130 %
- Water Absorption at Saturation: 0.40 %
$ 1837/MT
- Density: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0041 cm/cm @Time 86400 sec
$ 1773/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.18 g/cc
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 11 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1491/MT
- Specific Gravity: 1.10 g/cc
- Density: 1.10 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2494/MT
- Density: 1.39 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Time 86400 sec
- Tensile Strength at Break: 77.0 MPa
- Elongation at Break: 0.90 %
- Tensile Modulus: 11.99 GPa
$ 1868/MT
- Specific Gravity: 1.05 g/cc
- Density: 1.05 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 1.0 %
- Viscosity: 230000 cP
$ 1517/MT
- Specific Gravity: 1.19 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 50.0 MPa
- Tensile Strength, Yield: 63.0 MPa
$ 1659/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.170 %
- Moisture Absorption: 0.250 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
$ 2123/MT
- Specific Gravity: 1.18 g/cc
- Specific Gravity: 1.22 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1976/MT
- Density: 1.27 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Tensile Strength, Yield: 40.0 MPa
- Elongation at Yield: 1.8 %
- Tensile Modulus: 3.00 GPa
$ 1716/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2488/MT
- Density: 1.26 g/cc
- Density: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
$ 2506/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 195000 cP
$ 1675/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 16 g/10 min @Load 5.00 kg, Temperature 260 °C
- Hardness, H358/30: 100 MPa
- Tensile Strength at Break: 55.0 MPa
$ 1915/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 195000 cP
$ 2543/MT
- Density: 1.17 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0060 cm/cm
- Melt Flow: 14 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2466/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.250 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Time 86400 sec
$ 1817/MT
- Density: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0053 - 0.0065 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0053 - 0.0065 cm/cm @Time 86400 sec
- Tensile Strength at Break: 49.0 MPa
- Tensile Strength, Yield: 55.0 MPa
$ 1949/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1483/MT
- Specific Gravity: 1.19 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 21.5 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 45.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 1501/MT
- Density: 1.49 g/cc
- Density: 1.50 g/cc
- Linear Mold Shrinkage, Flow: 0.00050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0027 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0030 cm/cm @Time 86400 sec
$ 1923/MT
- Density: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0041 cm/cm @Time 86400 sec
$ 2048/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1588/MT
- Density: 1.16 g/cc
- Density: 1.165 g/cc
- Moisture Absorption: 0.300 %
- Moisture Absorption: 0.350 %
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Time 86400 sec
$ 1524/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1858/MT
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.12 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 11 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1468/MT
- Specific Gravity: 1.30 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Time 86400 sec
- Tensile Strength, Yield: 62.0 MPa
$ 1468/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.00050 - 0.00070 cm/cm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.3 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1620/MT
- Specific Gravity: 1.05 g/cc
- Viscosity: 255000 cP @Temperature 260 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 1.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 108
$ 1828/MT
- Specific Gravity: 1.16 g/cc
- Density: 1.16 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1765/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 44.0 MPa
$ 2180/MT
- Specific Gravity: 1.04 g/cc
- Viscosity: 280000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 1.2 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 10 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1515/MT
- Specific Gravity: 1.06 g/cc
- Density: 1.07 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 25 g/10 min @Load 10.0 kg, Temperature 220 °C
- Melt Flow: 25 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1545/MT
- Specific Gravity: 1.05 g/cc
- Density: 1.04 g/cc
- Viscosity: 245000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 3.7 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1635/MT
- Density: 1.11 g/cc
- Density: 1.12 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0018 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0027 cm/cm @Time 86400 sec
$ 1488/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2459/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0400 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1573/MT
- Density: 1.33 g/cc
- Density: 1.33 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0059 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0064 cm/cm
$ 1744/MT
- Specific Gravity: 1.05 g/cc
- Density: 1.04 g/cc
- Viscosity: 217000 cP
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.6 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1525/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 51.0 MPa
- Tensile Strength, Yield: 62.0 MPa
$ 1734/MT
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
- Melt Flow: 18 g/10 min @Load 5.00 kg, Temperature 220 °C
$ 1649/MT
- Density: 1.26 g/cc
- Density: 1.26 g/cc
- Moisture Absorption: 0.110 %
- Moisture Absorption: 0.110 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Time 86400 sec
$ 1971/MT
- Density: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.0500 %
- Linear Mold Shrinkage, Flow: 0.0069 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0061 cm/cm
$ 1928/MT
- Density: 1.39 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Time 86400 sec
- Tensile Strength at Break: 77.0 MPa
- Elongation at Break: 0.90 %
- Tensile Modulus: 11.99 GPa
$ 1741/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.19 g/cc
- Viscosity: 290000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.0 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1555/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1537/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0300 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0033 cm/cm
$ 1800/MT
- Specific Gravity: 1.13 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.5 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: 120 %
$ 1629/MT
- Density: 2.30 g/cc
- Density: 2.30 g/cc
- Moisture Absorption: 0.160 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Time 86400 sec
$ 1850/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.30 %
- Moisture Absorption at Equilibrium: 0.19 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
$ 1542/MT
- Specific Gravity: 1.58 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0060 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 117 MPa
- Elongation at Break: 5.0 %
$ 1574/MT
- Specific Gravity: 1.03 g/cc
- Viscosity: 1.40e+6 cP
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 4.0 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength at Break: 30.0 MPa
$ 2122/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.11 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0056 - 0.0063 cm/cm @Thickness 3.20 mm
$ 2024/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2215/MT
- Density: 1.19 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 45.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 2353/MT
- Density: 1.32 g/cc
- Linear Mold Shrinkage, Flow: 0.0015 - 0.0030 cm/cm
- Tensile Strength at Break: 57.0 MPa
- Elongation at Break: 1.2 %
- Tensile Modulus: 5.60 GPa
$ 1454/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 16.4 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 48.0 MPa
$ 1763/MT
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Melt Flow: 12 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1753/MT
- Density: 1.05 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 31 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2246/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1793/MT
- Density: 1.05 g/cc
- Density: 1.05 g/cc
- Moisture Absorption at Equilibrium: 1.6 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0077 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Time 86400 sec
$ 1653/MT
- Density: 1.10 g/cc
- Density: 1.11 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Time 86400 sec
$ 1728/MT
- Specific Gravity: 1.24 g/cc
- Melt Flow: 13 g/10 min @Load 1.20 kg, Temperature 260 °C
- Tensile Strength at Break: 37.0 MPa
- Tensile Strength, Yield: 57.0 MPa
- Elongation at Break: 20 %
$ 1497/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Melt Flow: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 46.0 MPa
$ 1861/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1590/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.250 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Time 86400 sec
$ 1683/MT
- Density: 1.15 g/cc
- Density: 1.16 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0027 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
$ 1647/MT
- Density: 1.05 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 22 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1468/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 170000 cP
$ 1460/MT
- Specific Gravity: 1.05 g/cc
- Viscosity: 225000 cP @Temperature 260 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 1.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 113
$ 1530/MT
- Specific Gravity: 1.05 g/cc
- Density: 1.05 g/cc
- Moisture Absorption: 2.00 %
- Moisture Absorption: 3.70 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
$ 1782/MT
- Density: 1.18 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1544/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 44.0 MPa
- Tensile Strength, Yield: 51.0 MPa
$ 2509/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1631/MT
- Density: 1.49 g/cc
- Density: 1.50 g/cc
- Linear Mold Shrinkage, Flow: 0.00050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0027 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0030 cm/cm @Time 86400 sec
$ 1819/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.13 g/cc
- Moisture Absorption: 0.120 %
- Water Absorption at Saturation: 0.39 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1721/MT
- Specific Gravity: 1.09 g/cc
- Density: 1.09 g/cc
- Moisture Absorption: 0.190 %
- Moisture Absorption: 0.270 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
$ 1949/MT
- Density: 1.39 g/cc
- Moisture Absorption: 3.80 %
- Moisture Absorption: 5.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Time 86400 sec
$ 1620/MT
- Specific Gravity: 1.12 g/cc
- Density: 1.12 g/cc
- Melt Flow: 18.3 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 48 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 121
$ 1779/MT
- Density: 1.25 g/cc
- Density: 1.26 g/cc
- Moisture Absorption at Equilibrium: 0.31 %
- Moisture Absorption at Equilibrium: 0.30 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
$ 1572/MT
- Specific Gravity: 1.08 g/cc
- Density: 1.07 g/cc
- Melt Flow: 37.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 98 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 122
$ 1814/MT
- Specific Gravity: 1.17 g/cc
- Viscosity: 350000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.3 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 7.0 g/10 min @Load 5.00 kg, Temperature 220 °C
$ 1460/MT
- Specific Gravity: 1.17 g/cc
- Viscosity: 350000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.3 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 7.0 g/10 min @Load 5.00 kg, Temperature 220 °C
$ 1920/MT
- Density: 1.21 g/cc
- Density: 1.24 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
$ 1713/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.010 %
- Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 1727/MT
- Specific Gravity: 1.00 g/cc
- Density: 1.01 g/cc
- Volatiles: 0.10 %
- Particle Size: 400 µm
- Hardness, Shore D: 58
- Rubber: 32%
$ 2477/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.13 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1525/MT
- Specific Gravity: 1.19 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 55.0 MPa
- Tensile Strength, Yield: 60.0 MPa
$ 2115/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 1584/MT
- Specific Gravity: 1.14 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 2.5 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1541/MT
- Specific Gravity: 1.27 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0025 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0045 cm/cm @Thickness 3.20 mm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 33 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1844/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1484/MT
- Specific Gravity: 1.25 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 95.0 MPa
$ 2013/MT
- Density: 1.19 g/cc
- Tensile Strength at Break: 62.0 MPa
- Elongation at Break: 3.4 %
- Tensile Modulus: 3.65 GPa
- Flexural Strength: 103 MPa
$ 1609/MT
- Density: 1.11 g/cc
- Density: 1.12 g/cc
- Moisture Absorption: 0.220 %
- Moisture Absorption: 0.360 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Time 86400 sec
$ 2180/MT
- Specific Gravity: 1.16 g/cc
- Density: 1.16 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1575/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0400 %
- Water Absorption at Saturation: 0.090 %
- Linear Mold Shrinkage, Flow: 0.0025 - 0.0035 cm/cm @Thickness 3.20 mm
$ 1488/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2375/MT
- Density: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0053 - 0.0065 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0053 - 0.0065 cm/cm @Time 86400 sec
- Tensile Strength at Break: 49.0 MPa
- Tensile Strength, Yield: 55.0 MPa
$ 1676/MT
- Specific Gravity: 1.19 g/cc
- Water Absorption: 0.11 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 21.5 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 49.0 MPa
$ 2149/MT
- Density: 1.18 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1501/MT
- Specific Gravity: 1.05 g/cc
- Viscosity: 163000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 14 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2554/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.30 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1691/MT
- Density: 1.29 g/cc
- Tensile Strength at Break: 35.0 MPa
- Elongation at Break: 2.3 %
- Tensile Modulus: 2.41 GPa
- Flexural Strength: 68.0 MPa
$ 2588/MT
- Specific Gravity: 1.04 g/cc
- Density: 1.03 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1974/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Viscosity: 195000 cP @Temperature 260 °C
$ 1865/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 16.4 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 48.0 MPa
$ 1603/MT
- Density: 1.17 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0060 cm/cm
- Melt Flow: 14 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1614/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1798/MT
- Specific Gravity: 1.13 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 52.0 MPa
$ 1461/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 15 g/10 min @Load 5.00 kg, Temperature 260 °C
- Melt Index of Compound: 12 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 50.0 MPa
$ 1495/MT
- Density: 1.35 g/cc
- Linear Mold Shrinkage, Flow: 0.0042 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0045 cm/cm @Time 86400 sec
- Tensile Strength at Break: 47.0 MPa
- Tensile Strength, Yield: 58.0 MPa
$ 1762/MT
- Density: 1.21 g/cc
- Density: 1.21 g/cc
- Moisture Absorption: 0.400 %
- Moisture Absorption: 0.670 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Time 86400 sec
$ 2083/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 10 g/10 min @Load 10.0 kg, Temperature 220 °C
- Melt Index of Compound: 10 g/10 min @Load 10.0 kg, Temperature 220 °C
- Melt Index of Compound: 12 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1469/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 12 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 51.0 MPa
$ 1461/MT
- Specific Gravity: 1.09 g/cc
- Density: 1.09 g/cc
- Melt Flow: 10.9 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 21 g/10 min @Load 10.0 kg, Temperature 220 °C
- Flexural Yield Strength: 58.0 MPa
$ 2333/MT
- Density: 1.10 g/cc
- Density: 1.11 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Time 86400 sec
$ 1806/MT
- Specific Gravity: 1.18 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1547/MT
- Density: 1.18 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.170 %
- Moisture Absorption: 0.250 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
$ 1937/MT
- Density: 1.19 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 16 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1856/MT
- Specific Gravity: 1.23 g/cc
- Density: 1.23 g/cc
- Moisture Absorption: 0.600 %
- Moisture Absorption: 0.900 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
$ 1839/MT
- Specific Gravity: 1.19 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Index of Compound: 16 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 49.0 MPa
$ 2247/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1874/MT
- Specific Gravity: 1.03 g/cc
- Density: 1.03 g/cc
- Viscosity: 1.55e+6 cP
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.0 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1734/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
- Melt Index of Compound: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1538/MT
- Density: 1.17 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Tensile Strength, Yield: 44.0 MPa
- Elongation at Yield: 2.1 %
- Tensile Modulus: 3.40 GPa
$ 1696/MT
- Specific Gravity: 1.12 g/cc
- Density: 1.12 g/cc
- Moisture Absorption at Equilibrium: 0.41 %
- Moisture Absorption at Equilibrium: 0.28 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
$ 2072/MT
- Specific Gravity: 1.16 g/cc
- Density: 1.16 g/cc
- Moisture Absorption at Equilibrium: 0.23 %
- Moisture Absorption at Equilibrium: 0.15 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.00070 - 0.00090 cm/cm @Time 86400 sec
$ 1471/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1749/MT
- Specific Gravity: 1.56 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 6.40 mm
- Tensile Strength, Yield: 114 MPa
$ 2536/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1950/MT
- Density: 1.09 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm @Time 86400 sec
- Tensile Strength at Break: 39.0 MPa
- Elongation at Break: 15 %
$ 1549/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 18 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 58.0 MPa
- Elongation at Break: 70 %
$ 1499/MT
- Specific Gravity: 1.06 g/cc
- Density: 1.07 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 25 g/10 min @Load 10.0 kg, Temperature 220 °C
- Melt Flow: 25 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2479/MT
- Density: 1.08 g/cc
- Density: 1.08 g/cc
- Moisture Absorption: 0.800 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0068 cm/cm @Time 86400 sec
$ 1599/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.13 g/cc
- Moisture Absorption: 0.0200 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0090 cm/cm @Thickness 3.20 mm
$ 2109/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1475/MT
- Specific Gravity: 1.19 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 58.0 MPa
- Elongation at Break: 150 %
$ 1580/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1467/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2151/MT
- Density: 1.10 g/cc
- Tensile Strength at Break: 78.0 MPa
- Elongation at Break: 1.5 %
- Tensile Modulus: 7.23 GPa
- Flexural Strength: 117 MPa
$ 2226/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1527/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 13.5 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Index of Compound: 14 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 2103/MT
- Specific Gravity: 1.20 g/cc
- Viscosity: 290000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 10 g/10 min @Load 5.00 kg, Temperature 220 °C
$ 1865/MT
- Specific Gravity: 1.19 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Index of Compound: 16 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 49.0 MPa
$ 1965/MT
- Specific Gravity: 1.12 g/cc
- Tensile Strength at Break: 40.0 MPa
- Elongation at Break: 2.6 %
- Tensile Modulus: 2.40 GPa
- Flexural Strength: 68.0 MPa
$ 1889/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.060 %
- Water Absorption at Saturation: 0.26 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 2328/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.19 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1472/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 15 g/10 min @Load 5.00 kg, Temperature 260 °C
- Melt Index of Compound: 12 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 50.0 MPa
$ 2140/MT
- Specific Gravity: 1.25 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 50 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 50.0 MPa
$ 1597/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.13 g/cc
- Moisture Absorption at Equilibrium: 0.020 %
- Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1695/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 5.00 kg, Temperature 260 °C
- Hardness, H358/30: 91.0 MPa
- Tensile Strength, Yield: 45.0 MPa
$ 1448/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Viscosity: 195000 cP @Temperature 260 °C
$ 1877/MT
- Specific Gravity: 1.15 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 19 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 57.0 MPa
- Elongation at Break: 100 %
$ 2235/MT
- Specific Gravity: 1.03 g/cc
- Viscosity: 1.40e+6 cP
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 4.0 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength at Break: 30.0 MPa
$ 2094/MT
- Density: 1.06 g/cc
- Density: 1.065 g/cc
- Moisture Absorption: 1.08 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0041 cm/cm @Time 86400 sec
$ 1890/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 14.5 g/10 min @Load 2.16 kg, Temperature 260 °C
- Spiral Flow: 68.58 cm @Temperature 260 °C
$ 1963/MT
- Density: 1.18 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1485/MT
- Specific Gravity: 1.15 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 19 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 57.0 MPa
- Elongation at Break: 100 %
$ 1912/MT
- Specific Gravity: 1.17 g/cc
- Specific Gravity: 1.18 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1919/MT
- Density: 1.12 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 14 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1758/MT
- Density: 1.35 g/cc
- Linear Mold Shrinkage, Flow: 0.0042 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0045 cm/cm @Time 86400 sec
- Tensile Strength at Break: 47.0 MPa
- Tensile Strength, Yield: 58.0 MPa
$ 1772/MT
- Specific Gravity: 1.13 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 8.5 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 55.0 MPa
$ 2197/MT
- Specific Gravity: 1.05 g/cc
- Viscosity: 245000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 3.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 15 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2015/MT
- Density: 1.13 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 20 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1851/MT
- Density: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
$ 1662/MT
- Specific Gravity: 1.20 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1920/MT
- Density: 1.16 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Time 86400 sec
- Tensile Strength at Break: 34.0 MPa
- Elongation at Break: 2.5 %
- Tensile Modulus: 2.15 GPa
$ 1479/MT
- Specific Gravity: 1.19 g/cc
- Water Absorption: 0.11 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 21.5 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 49.0 MPa
$ 1503/MT
- Density: 1.38 g/cc
- Water Absorption: 0.11 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Tensile Strength at Break: 65.0 MPa
- Tensile Strength, Yield: 67.0 MPa
$ 1954/MT
- Density: 1.36 g/cc
- Water Absorption: 8.5 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Tensile Strength at Break: 43.0 MPa
- Elongation at Break: 2.4 %
$ 2342/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Viscosity: 100000 cP @Temperature 260 °C
$ 1930/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.26 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 2584/MT
- Specific Gravity: 1.39 g/cc
- Linear Mold Shrinkage, Flow: 0.00050 - 0.0015 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0015 - 0.0035 cm/cm @Thickness 3.20 mm
- Melt Flow: 22 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 36 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1491/MT
- Specific Gravity: 1.04 g/cc
- Density: 1.04 g/cc
- Viscosity: 225000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.6 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1859/MT
- Density: 1.15 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 19 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2020/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1896/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1546/MT
- Density: 1.25 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Tensile Strength, Yield: 45.0 MPa
- Elongation at Break: >= 10 %
- Flexural Yield Strength: 55.0 MPa
$ 2343/MT
- Specific Gravity: 1.27 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0025 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0045 cm/cm @Thickness 3.20 mm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 33 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1750/MT
- Density: 1.05 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 24 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2523/MT
- Specific Gravity: 1.14 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 12 g/10 min @Load 3.80 kg, Temperature 260 °C
- Tensile Strength, Yield: 59.0 MPa
- Elongation at Break: 75 %
$ 1627/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.080 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 3.20 mm
$ 2054/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Time 86400 sec
- Melt Index of Compound: 16 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength, Yield: 52.0 MPa
$ 1508/MT
- Density: 1.30 g/cc
- Tensile Strength at Break: 61.0 MPa
- Elongation at Break: 7.8 %
- Flexural Strength: 99.0 MPa
- Flexural Modulus: 3.20 GPa
$ 1755/MT
- Specific Gravity: 1.10 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 14 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2199/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.10 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1553/MT
- Specific Gravity: 1.52 g/cc
- Density: 1.53 g/cc
- Volatiles: 0.30 %
- Particle Size: 400 µm
- Hardness, Shore D: 55
- Rubber: 18%
$ 1963/MT
- Density: 1.05 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 16 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1714/MT
- Specific Gravity: 1.27 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0025 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0045 cm/cm @Thickness 3.20 mm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 33 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1453/MT
- Density: 1.07 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Time 86400 sec
- Tensile Strength at Break: 50.0 MPa
- Elongation at Break: 2.2 %
$ 1921/MT
- Specific Gravity: 1.04 g/cc
- Density: 1.03 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1469/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 37 g/10 min @Load 5.00 kg, Temperature 260 °C
- Hardness, Rockwell R: 121
$ 1707/MT
- Density: 1.25 g/cc
- Density: 1.26 g/cc
- Moisture Absorption at Equilibrium: 0.31 %
- Moisture Absorption at Equilibrium: 0.30 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
$ 2491/MT
- Specific Gravity: 1.15 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 11.4 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 60.0 MPa
- Elongation at Break: 150 %
$ 2066/MT
- Density: 2.30 g/cc
- Density: 2.30 g/cc
- Moisture Absorption: 0.160 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Time 86400 sec
$ 2122/MT
- Density: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 2.00 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0093 cm/cm @Time 86400 sec
$ 2207/MT
- Specific Gravity: 1.08 g/cc
- Density: 1.08 g/cc
- Melt Flow: 23 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 78 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 122
$ 1645/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Viscosity: 100000 cP @Temperature 260 °C
$ 2471/MT
- Density: 1.23 g/cc
- Density: 1.23 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0074 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0063 cm/cm
$ 1713/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.160 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1670/MT
- Specific Gravity: 1.25 g/cc
- Density: 1.26 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 2124/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 23 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Index of Compound: 21 g/10 min @Load 2.16 kg, Temperature 260 °C
- Hardness, H358/30: 110 MPa
$ 1616/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.35 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1686/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.230 %
- Moisture Absorption: 0.280 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1588/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.170 %
- Moisture Absorption: 0.240 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 2292/MT
- Density: 1.05 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 8.0 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2047/MT
- Specific Gravity: 1.28 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 40.0 MPa
$ 1981/MT
- Specific Gravity: 1.04 g/cc
- Viscosity: 225000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 1.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 105
$ 1585/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.26 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0065 - 0.0075 cm/cm @Thickness 3.20 mm
$ 2362/MT
- Density: 1.05 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 24 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2317/MT
- Tensile Strength at Break: 40.0 MPa
- Elongation at Break: 2.3 %
- Tensile Modulus: 2.75 GPa
- Flexural Strength: 68.0 MPa
- Flexural Modulus: 2.73 GPa
$ 2028/MT
- Density: 1.39 g/cc
- Moisture Absorption at Equilibrium: 5.6 %
- Moisture Absorption at Equilibrium: 3.8 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Time 86400 sec
$ 1826/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Viscosity: 320000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 3.3 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1447/MT
- Density: 1.21 g/cc
- Density: 1.21 g/cc
- Moisture Absorption: 2.30 %
- Linear Mold Shrinkage, Flow: 0.0079 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Time 86400 sec
$ 1890/MT
- Density: 1.20 g/cc
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 40.0 MPa
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Yield: 3.0 %
$ 2095/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.11 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0056 - 0.0063 cm/cm @Thickness 3.20 mm
$ 2572/MT
- Specific Gravity: 1.09 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Hardness, Rockwell R: 111
- Tensile Strength, Yield: 45.0 MPa
- Tensile Modulus: 2.41 GPa
$ 2171/MT
- Density: 1.14 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0010 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0020 cm/cm @Time 86400 sec
- Tensile Strength at Break: 31.0 MPa
$ 1771/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Time 86400 sec
- Tensile Strength at Break: 34.0 MPa
- Elongation at Break: 3.1 %
- Tensile Modulus: 2.57 GPa
$ 1634/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.10 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1454/MT
- Specific Gravity: 1.04 g/cc
- Viscosity: 1.16e+6 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 9.0 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength at Break: 33.0 MPa
$ 1514/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1468/MT
- Density: 1.26 g/cc
- Density: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
$ 1645/MT
- Density: 1.15 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 24 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2580/MT
- Density: 1.12 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.70 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 24 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1872/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 15 g/10 min @Load 5.00 kg, Temperature 260 °C
- Melt Index of Compound: 12 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 50.0 MPa
$ 1731/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 13.5 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Index of Compound: 14 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1609/MT
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 16 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1901/MT
- Density: 1.19 g/cc
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 6.20 GPa
- Flexural Strength: 110 MPa
$ 1594/MT
- Specific Gravity: 1.03 g/cc
- Viscosity: 1.40e+6 cP
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 4.0 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength at Break: 28.0 MPa
$ 1532/MT
- Density: 1.07 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
- Tensile Strength at Break: 28.0 MPa
- Elongation at Break: >= 25 %
- Tensile Modulus: 1.30 GPa
$ 2361/MT
- Density: 1.35 g/cc
- Linear Mold Shrinkage, Flow: 0.0042 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0045 cm/cm @Time 86400 sec
- Tensile Strength at Break: 47.0 MPa
- Tensile Strength, Yield: 58.0 MPa
$ 1916/MT
- Density: 1.28 g/cc
- Density: 1.29 g/cc
- Moisture Absorption: 3.00 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
$ 2190/MT
- Density: 1.25 g/cc
- Tensile Strength at Break: 95.0 MPa
- Tensile Strength at Break: 96.0 MPa
- Elongation at Break: 1.9 %
- Elongation at Yield: 1.9 %
$ 2123/MT
- Density: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
$ 1802/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 14.5 g/10 min @Load 2.16 kg, Temperature 260 °C
- Spiral Flow: 68.58 cm @Temperature 260 °C
$ 1780/MT
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 2380/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1503/MT
- Specific Gravity: 1.04 g/cc
- Viscosity: 280000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 1.2 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 10 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2576/MT
- Specific Gravity: 1.12 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2010/MT
- Specific Gravity: 1.17 g/cc
- Specific Gravity: 1.18 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2102/MT
- Density: 1.21 g/cc
- Tensile Strength at Break: 33.0 MPa
- Elongation at Break: >= 10 %
- Flexural Strength: 49.0 MPa
- Flexural Modulus: 1.70 GPa
$ 1768/MT
- Specific Gravity: 1.05 g/cc
- Viscosity: 255000 cP @Temperature 260 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 1.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 110
$ 1573/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
- Melt Index of Compound: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1524/MT
- Density: 1.17 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
- Tensile Strength at Break: 70.0 MPa
- Elongation at Break: 2.2 %
- Tensile Modulus: 5.67 GPa
$ 2224/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Viscosity: 170000 cP @Temperature 260 °C
$ 1606/MT
- Density: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 2.00 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0093 cm/cm @Time 86400 sec
$ 1705/MT
- Specific Gravity: 1.09 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Hardness, Rockwell R: 111
- Tensile Strength, Yield: 45.0 MPa
- Tensile Modulus: 2.41 GPa
$ 2006/MT
- Density: 1.11 g/cc
- Density: 1.12 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0018 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0027 cm/cm @Time 86400 sec
$ 1600/MT
- Specific Gravity: 1.03 g/cc
- Density: 1.03 g/cc
- Viscosity: 1.55e+6 cP
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.0 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1982/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 21 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 44.0 MPa
$ 1764/MT
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1501/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 58.0 MPa
- Elongation at Break: 70 %
$ 1459/MT
- Specific Gravity: 1.18 g/cc
- Specific Gravity: 1.19 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1961/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 21 g/10 min @Load 2.16 kg, Temperature 260 °C
- Hardness, H358/30: 110 MPa
- Tensile Strength at Break: 45.0 MPa
$ 2433/MT
- Specific Gravity: 1.04 g/cc
- Density: 1.04 g/cc
- Viscosity: 225000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.6 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1686/MT
- Density: 1.15 g/cc
- Density: 1.16 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0027 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
$ 1665/MT
- Density: 1.05 g/cc
- Density: 1.05 g/cc
- Moisture Absorption at Equilibrium: 1.6 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0077 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Time 86400 sec
$ 1476/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 2518/MT
- Density: 1.10 g/cc
- Density: 1.11 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Time 86400 sec
$ 1650/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.30 %
$ 1572/MT
- Density: 1.25 g/cc
- Tensile Strength at Break: 95.0 MPa
- Tensile Strength at Break: 96.0 MPa
- Elongation at Break: 1.9 %
- Elongation at Yield: 1.9 %
$ 1889/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1498/MT
- Density: 1.09 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm @Time 86400 sec
- Tensile Strength at Break: 54.0 MPa
- Elongation at Break: 2.1 %
- Tensile Modulus: 4.34 GPa
$ 2505/MT
- Density: 1.15 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 2477/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 170000 cP
$ 1571/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1923/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1511/MT
- Density: 3.99 g/cc
- Density: 4.00 g/cc
- Linear Mold Shrinkage, Flow: 0.0035 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Time 86400 sec
$ 1483/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 51.0 MPa
- Tensile Strength, Yield: 62.0 MPa
$ 1547/MT
- Density: 1.14 g/cc
- Tensile Strength at Break: 106 MPa
- Elongation at Break: 1.3 %
- Tensile Modulus: 12.96 GPa
- Flexural Strength: 158 MPa
$ 1842/MT
- Specific Gravity: 1.04 g/cc
- Viscosity: 225000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.6 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 18 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1906/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2297/MT
- Specific Gravity: 1.14 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 59.0 MPa
- Elongation at Break: 75 %
$ 2148/MT
- Density: 1.10 g/cc
- Water Absorption: 0.23 % @Time 86400 sec
- Tensile Strength at Break: 52.0 MPa
- Elongation at Break: 1.0 %
- Tensile Modulus: 9.90 GPa
$ 2038/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0080 cm/cm @Thickness 3.20 mm
$ 2240/MT
- Density: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm
- Tensile Strength at Break: 82.0 MPa
- Elongation at Break: 1.4 %
- Flexural Strength: 109 MPa
$ 1842/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1451/MT
- Specific Gravity: 1.13 g/cc
- Density: 1.13 g/cc
- Melt Flow: 9.0 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 44.0 MPa
- Tensile Strength, Yield: 44.0 MPa
$ 2219/MT
- Density: 1.35 g/cc
- Density: 1.39 g/cc
- Moisture Absorption at Equilibrium: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0011 cm/cm @Time 86400 sec
$ 1586/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1859/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1811/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1953/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1491/MT
- Density: 1.19 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
- Melt Flow: 7.0 g/10 min @Load 5.00 kg, Temperature 220 °C
$ 1596/MT
- Density: 1.28 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm @Time 86400 sec
- Tensile Strength at Break: 83.0 MPa
- Tensile Strength at Break: 96.0 MPa
$ 1527/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1480/MT
- Density: 1.16 g/cc
- Density: 1.16 g/cc
- Moisture Absorption: 0.240 %
- Moisture Absorption: 0.350 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Time 86400 sec
$ 1965/MT
- Specific Gravity: 1.05 g/cc
- Density: 1.04 g/cc
- Viscosity: 172000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 11.7 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1781/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1591/MT
- Density: 1.05 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 24 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1625/MT
- Specific Gravity: 1.08 g/cc
- Density: 1.08 g/cc
- Density: 1.08 g/cc
- Moisture Absorption: 0.800 %
- Moisture Absorption: 0.800 %
$ 1448/MT
- Density: 1.29 g/cc
- Water Absorption at Saturation: 0.15 %
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Index of Compound: 17 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 86.0 MPa
$ 1715/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 2166/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.0400 %
- Water Absorption at Saturation: 0.090 %
- Linear Mold Shrinkage, Flow: 0.0035 - 0.0045 cm/cm @Thickness 3.20 mm
$ 2225/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1471/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1758/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1511/MT
- Specific Gravity: 1.08 g/cc
- Density: 1.08 g/cc
- Melt Flow: 6.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 16 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 121
$ 1497/MT
- Density: 1.05 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 16 g/10 min @Load 5.00 kg, Temperature 220 °C
$ 2149/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Melt Index of Compound: 27 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 107 MPa
- Flexural Yield Strength: 113 MPa
$ 2076/MT
- Specific Gravity: 1.05 g/cc
- Density: 1.05 g/cc
- Moisture Absorption: 0.250 %
- Moisture Absorption: 0.360 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
$ 1447/MT
- Specific Gravity: 1.08 g/cc
- Density: 1.08 g/cc
- Melt Flow: 19.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 47 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 123
$ 2303/MT
- Specific Gravity: 1.13 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 52.0 MPa
$ 1895/MT
- Specific Gravity: 1.05 g/cc
- Density: 1.05 g/cc
- Volatiles: 0.40 %
- Particle Size: 120 µm
- Hardness, Rockwell R: 114
$ 1638/MT
- Density: 1.16 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Time 86400 sec
- Tensile Strength at Break: 34.0 MPa
- Elongation at Break: 2.5 %
- Tensile Modulus: 2.15 GPa
$ 1553/MT
- Density: 1.10 g/cc
- Density: 1.111 g/cc
- Moisture Absorption: 0.380 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0041 cm/cm @Time 86400 sec
$ 1736/MT
- Density: 1.21 g/cc
- Tensile Strength at Break: 40.0 MPa
- Tensile Modulus: 2.50 GPa
- Flexural Strength: 61.0 MPa
- Flexural Modulus: 2.60 GPa
$ 1845/MT
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 2473/MT
- Specific Gravity: 1.23 g/cc
- Density: 1.22 g/cc
- Density: 1.23 g/cc
- Moisture Absorption: 0.130 %
- Moisture Absorption: 0.210 %
$ 1961/MT
- Specific Gravity: 1.33 g/cc
- Density: 1.33 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0059 cm/cm @Thickness 3.20 mm
$ 1601/MT
- Density: 1.26 g/cc
- Tensile Strength at Break: 49.0 MPa
- Tensile Strength, Yield: 56.0 MPa
- Elongation at Break: 5.0 %
- Elongation at Yield: 100 %
$ 1938/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Moisture Absorption: 0.130 %
- Water Absorption at Saturation: 0.40 %
$ 1816/MT
- Density: 1.29 g/cc
- Tensile Strength at Break: 35.0 MPa
- Elongation at Break: 2.3 %
- Tensile Modulus: 2.41 GPa
- Flexural Strength: 68.0 MPa
$ 2254/MT
- Density: 1.17 g/cc
- Density: 1.17 g/cc
- Moisture Absorption: 0.220 %
- Moisture Absorption: 0.320 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm @Time 86400 sec
$ 1642/MT
- Specific Gravity: 1.17 g/cc
- Density: 1.17 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0090 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.0090 cm/cm @Thickness 3.20 mm
- Melt Flow: 13 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 2092/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.00050 - 0.00070 cm/cm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.3 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1997/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 1.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 109
- Tensile Strength, Yield: 48.0 MPa
$ 1869/MT
- Density: 1.05 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 24 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1587/MT
- Tensile Strength at Break: 40.0 MPa
- Elongation at Break: 2.3 %
- Tensile Modulus: 2.75 GPa
- Flexural Strength: 68.0 MPa
- Flexural Modulus: 2.73 GPa
$ 1562/MT
- Specific Gravity: 1.22 g/cc
- Tensile Strength at Break: 51.0 MPa
- Tensile Strength, Yield: 62.0 MPa
- Elongation at Break: 110 %
- Flexural Yield Strength: 95.0 MPa
$ 1673/MT
- Density: 1.17 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1821/MT
- Density: 1.38 g/cc
- Water Absorption: 0.24 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Tensile Strength, Yield: 25.0 MPa
- Elongation at Break: 5.9 %
$ 1598/MT
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Melt Flow: 15 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1824/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 73.0 MPa
- Elongation at Break: 10 %
$ 1843/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.14 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 195000 cP
$ 1563/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm
- Tensile Strength, Yield: 66.0 MPa
- Elongation at Break: 50 %
$ 1828/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1958/MT
- Specific Gravity: 1.10 g/cc
- Density: 1.10 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1551/MT
- Density: 1.13 g/cc
- Density: 1.13 g/cc
- Moisture Absorption: 0.200 %
- Moisture Absorption: 0.310 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Time 86400 sec
$ 1633/MT
- Specific Gravity: 1.08 g/cc
- Density: 1.08 g/cc
- Melt Flow: 6.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 16 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 121
$ 1598/MT
- Specific Gravity: 1.18 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.120 %
- Water Absorption at Saturation: 0.24 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2042/MT
- Specific Gravity: 1.08 g/cc
- Density: 1.08 g/cc
- Melt Flow: 5.8 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 16 g/10 min @Load 10.0 kg, Temperature 220 °C
- Flexural Yield Strength: 92.0 MPa
$ 2172/MT
- Density: 1.18 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 22 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1683/MT
- Density: 1.29 g/cc
- Water Absorption at Saturation: 0.15 %
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength at Break: 94.0 MPa
- Elongation at Break: 3.0 %
$ 2124/MT
- Density: 1.45 g/cc
- Density: 1.453 g/cc
- Water Absorption: 0.090 % @Temperature 23.0 °C, Time 86400 sec
- Water Absorption: 0.088 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.00080 - 0.0028 cm/cm @Time 86400 sec
$ 2278/MT
- Specific Gravity: 1.39 g/cc
- Linear Mold Shrinkage, Flow: 0.00050 - 0.0015 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0015 - 0.0035 cm/cm @Thickness 3.20 mm
- Melt Flow: 22 g/10 min @Load 2.16 kg, Temperature 260 °C
- Melt Flow: 36 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1638/MT
- Specific Gravity: 1.15 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 19 g/10 min @Load 5.00 kg, Temperature 260 °C
- Melt Index of Compound: 24 g/10 min @Load 5.00 kg, Temperature 265 °C
- Tensile Strength, Yield: 55.0 MPa
$ 1447/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1521/MT
- Density: 1.17 g/cc
- Moisture Absorption at Equilibrium: 0.12 %
- Water Absorption at Saturation: 0.43 % @Temperature 23.0 °C
- Melt Flow: 17 g/10 min @Load 5.00 kg, Temperature 265 °C
- Tensile Strength at Break: 46.0 MPa
$ 1814/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage, Flow: 0.023 cm/cm @Time 86400 sec
- Tensile Strength at Break: 58.0 MPa
- Elongation at Break: 2.1 %
- Tensile Modulus: 4.26 GPa
$ 1708/MT
- Specific Gravity: 1.05 g/cc
- Density: 1.05 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 2086/MT
- Specific Gravity: 1.04 g/cc
- Density: 1.04 g/cc
- Viscosity: 225000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.6 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 2533/MT
- Specific Gravity: 1.05 g/cc
- Density: 1.04 g/cc
- Viscosity: 245000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 3.7 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1784/MT
- Specific Gravity: 1.25 g/cc
- Moisture Absorption: 0.0200 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 13.5 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1477/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Viscosity: 320000 cP
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 3.3 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 1745/MT
- Density: 1.05 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 17 g/10 min @Load 5.00 kg, Temperature 220 °C
$ 1822/MT
- Specific Gravity: 1.09 g/cc
- Tensile Strength at Break: 38.0 MPa
- Elongation at Yield: 4.0 %
- Tensile Modulus: 1.77 GPa
- Flexural Strength: 54.0 MPa
$ 1849/MT
- Specific Gravity: 1.15 g/cc
- Density: 1.15 g/cc
- Density: 1.15 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.30 %
$ 1567/MT
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Melt Flow: 33 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1941/MT
- Specific Gravity: 1.05 g/cc
- Density: 1.05 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.6 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 19 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1915/MT
- Specific Gravity: 1.12 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1783/MT
- Specific Gravity: 1.05 g/cc
- Viscosity: 255000 cP @Temperature 240 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 16 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1723/MT
- Density: 1.26 g/cc
- Water Absorption: 0.010 % @Time 86400 sec
- Moisture Absorption: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0065 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0056 cm/cm @Time 86400 sec
$ 1858/MT
- Specific Gravity: 1.14 g/cc
- Density: 1.10 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 26 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: 40.0 MPa
$ 1489/MT
- Specific Gravity: 1.08 g/cc
- Density: 1.07 g/cc
- Melt Flow: 37.8 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 78 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 123
Delivery ABS Polymer SABIC Innovative Plastics (GE Plastics)
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):| Country | 20’ Container | 40’ Container | 5,000 MT |
|---|---|---|---|
| 🇦🇺 Australia | $3345 | $4181 | $401400 |
| 🇦🇹 Austria | $2825 | $3531 | $339000 |
| 🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
| 🇦🇱 Albania | $2500 | $3125 | $300000 |
| 🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
| 🇦🇴 Angola | $2762.5 | $3453 | $331500 |
| 🇦🇷 Argentina | $3230 | $4038 | $387600 |
| 🇦🇲 Armenia | $2625 | $3281 | $315000 |
| 🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
| 🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
| 🇧🇭 Bahrain | $3095 | $3869 | $371400 |
| 🇧🇾 Belarus | $2825 | $3531 | $339000 |
| 🇧🇿 Belize | $3155 | $3944 | $378600 |
| 🇧🇪 Belgium | $2575 | $3219 | $309000 |
| 🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
| 🇧🇴 Bolivia | $3230 | $4038 | $387600 |
| 🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
| 🇧🇷 Brazil | $3120 | $3900 | $374400 |
| 🇭🇺 Hungary | $2575 | $3219 | $309000 |
| 🇻🇪 Venezuela | $3230 | $4038 | $387600 |
| 🇻🇳 Vietnam | $2625 | $3281 | $315000 |
| 🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
| 🇬🇹 Guatemala | $3230 | $4038 | $387600 |
| 🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
| 🇩🇪 Germany | $2475 | $3094 | $297000 |
| 🇭🇳 Honduras | $3230 | $4038 | $387600 |
| 🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
| 🇬🇷 Greece | $2575 | $3219 | $309000 |
| 🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
| 🇩🇰 Denmark | $2400 | $3000 | $288000 |
| 🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
| 🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
| 🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
| 🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
| 🇮🇱 Israel | $2625 | $3281 | $315000 |
| 🇮🇳 India | $3712.5 | $4641 | $445500 |
| 🇮🇩 Indonesia | $3095 | $3869 | $371400 |
| 🇯🇴 Jordan | $2625 | $3281 | $315000 |
| 🇮🇶 Iraq | $2625 | $3281 | $315000 |
| 🇮🇷 Iran | $3095 | $3869 | $371400 |
| 🇮🇪 Ireland | $2500 | $3125 | $300000 |
| 🇮🇸 Iceland | $2575 | $3219 | $309000 |
| 🇪🇸 Spain | $2500 | $3125 | $300000 |
| 🇮🇹 Italy | $2400 | $3000 | $288000 |
| 🇾🇪 Yemen | $2625 | $3281 | $315000 |
| 🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
| 🇰🇭 Cambodia | $3095 | $3869 | $371400 |
| 🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
| 🇨🇦 Canada | $3230 | $4038 | $387600 |
| 🇶🇦 Qatar | $2625 | $3281 | $315000 |
| 🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
| 🇨🇾 Cyprus | $2625 | $3281 | $315000 |
| 🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
| 🇨🇳 China | $3712.5 | $4641 | $445500 |
| 🇨🇴 Colombia | $3230 | $4038 | $387600 |
| 🇰🇷 Korea South | $2625 | $3281 | $315000 |
| 🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
| 🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
| 🇨🇺 Cuba | $3230 | $4038 | $387600 |
| 🇰🇼 Kuwait | $2625 | $3281 | $315000 |
| 🇱🇻 Latvia | $2575 | $3219 | $309000 |
| 🇱🇧 Lebanon | $2625 | $3281 | $315000 |
| 🇱🇾 Libya | $2762.5 | $3453 | $331500 |
| 🇱🇹 Lithuania | $2500 | $3125 | $300000 |
| 🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
| 🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
| 🇲🇾 Malaysia | $2625 | $3281 | $315000 |
| 🇲🇹 Malta | $2500 | $3125 | $300000 |
| 🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
| 🇲🇽 Mexico | $3155 | $3944 | $378600 |
| 🇲🇩 Moldova | $2400 | $3000 | $288000 |
| 🇲🇨 Monaco | $2475 | $3094 | $297000 |
| 🇲🇳 Mongolia | $2625 | $3281 | $315000 |
| 🇲🇲 Myanmar | $2625 | $3281 | $315000 |
| 🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
| 🇳🇵 Nepal | $2625 | $3281 | $315000 |
| 🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
| 🇳🇱 Netherlands | $2575 | $3219 | $309000 |
| 🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
| 🇳🇿 New Zealand | $3345 | $4181 | $401400 |
| 🇳🇴 Norway | $2400 | $3000 | $288000 |
| 🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
| 🇴🇲 Oman | $2625 | $3281 | $315000 |
| 🇵🇰 Pakistan | $2625 | $3281 | $315000 |
| 🇵🇦 Panama | $3230 | $4038 | $387600 |
| 🇵🇾 Paraguay | $3155 | $3944 | $378600 |
| 🇵🇪 Peru | $3230 | $4038 | $387600 |
| 🇵🇱 Poland | $2575 | $3219 | $309000 |
| 🇵🇹 Portugal | $2500 | $3125 | $300000 |
| 🇷🇺 Russia | $2575 | $3219 | $309000 |
| 🇷🇴 Romania | $2475 | $3094 | $297000 |
| 🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
| 🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
| 🇷🇸 Serbia | $2575 | $3219 | $309000 |
| 🇸🇬 Singapore | $3095 | $3869 | $371400 |
| 🇸🇾 Syria | $3095 | $3869 | $371400 |
| 🇸🇰 Slovakia | $2500 | $3125 | $300000 |
| 🇸🇮 Slovenia | $2500 | $3125 | $300000 |
| 🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
| 🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
| 🇺🇸 United States | $2902.5 | $3628 | $348300 |
| 🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
| 🇹🇭 Thailand | $2625 | $3281 | $315000 |
| 🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
| 🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
| 🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
| 🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
| 🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
| 🇹🇷 Turkey | $2625 | $3281 | $315000 |
| 🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
| 🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
| 🇺🇦 Ukraine | $2500 | $3125 | $300000 |
| 🇺🇾 Uruguay | $2675 | $3344 | $321000 |
| 🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
| 🇵🇭 Philippines | $2625 | $3281 | $315000 |
| 🇫🇮 Finland | $2500 | $3125 | $300000 |
| 🇫🇷 France | $2575 | $3219 | $309000 |
| 🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
| 🇲🇪 Montenegro | $2575 | $3219 | $309000 |
| 🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
| 🇨🇱 Chile | $3355 | $4194 | $402600 |
| 🇨🇭 Switzerland | $2575 | $3219 | $309000 |
| 🇸🇪 Sweden | $2500 | $3125 | $300000 |
| 🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
| 🇪🇨 Ecuador | $3155 | $3944 | $378600 |
| 🇦🇸 American Samoa | $3345 | $4181 | $401400 |
| 🇸🇻 El Salvador | $3230 | $4038 | $387600 |
| 🇪🇪 Estonia | $2575 | $3219 | $309000 |
| 🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
| 🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
| 🇯🇵 Japan | $3095 | $3869 | $371400 |
| 🇦🇩 Andorra | $2500 | $3125 | $300000 |
| 🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
| 🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
| 🇧🇧 Barbados | $3230 | $4038 | $387600 |
| 🇧🇹 Bhutan | $3095 | $3869 | $371400 |
| 🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
| 🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
| 🇧🇳 Brunei | $2625 | $3281 | $315000 |
| 🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
| 🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
| 🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
| 🇹🇩 Chad | $2762.5 | $3453 | $331500 |
| 🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
| 🇧🇯 Benin | $2762.5 | $3453 | $331500 |
| 🇩🇲 Dominica | $3230 | $4038 | $387600 |
| 🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
| 🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
| 🇫🇯 Fiji | $3345 | $4181 | $401400 |
| 🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
| 🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
| 🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
| 🇰🇮 Kiribati | $3345 | $4181 | $401400 |
| 🇬🇩 Grenada | $3355 | $4194 | $402600 |
| 🇬🇺 Guam | $3345 | $4181 | $401400 |
| 🇬🇾 Guyana | $3230 | $4038 | $387600 |
| 🇭🇹 Haiti | $3120 | $3900 | $374400 |
| 🇯🇲 Jamaica | $3230 | $4038 | $387600 |
| 🇰🇵 Korea, North | $2625 | $3281 | $315000 |
| 🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
| 🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
| 🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
| 🇲🇻 Maldives | $2625 | $3281 | $315000 |
| 🇲🇱 Mali | $2762.5 | $3453 | $331500 |
| 🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
| 🇨🇼 Curaçao | $3230 | $4038 | $387600 |
| 🇦🇼 Aruba | $3120 | $3900 | $374400 |
| 🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
| 🇳🇪 Niger | $2762.5 | $3453 | $331500 |
| 🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
| 🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
| 🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
| 🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
| 🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
| 🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
| 🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
| 🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
| 🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
| 🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
| 🇸🇲 San Marino | $2500 | $3125 | $300000 |
| 🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
| 🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
| 🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
| 🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
| 🇸🇷 Suriname | $3230 | $4038 | $387600 |
| 🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
| 🇹🇬 Togo | $2762.5 | $3453 | $331500 |
| 🇹🇴 Tonga | $3345 | $4181 | $401400 |
| 🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
| 🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
| 🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, retired cruise ships for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.
