$ 1962/MT
- Specific Gravity: 1.34 g/cc
- Water Absorption: 0.21 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 7.8 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 2085/MT
- Density: 1.44 g/cc
- Density: 1.44 g/cc
- Moisture Absorption at Equilibrium: 0.14 %
- Moisture Absorption at Equilibrium: 0.11 % @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.00080 - 0.010 cm/cm @Time 86400 sec
$ 1633/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 9.0 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 2342/MT
- Density: 1.37 g/cc
- Moisture Absorption at Equilibrium: 0.65 %
- Water Absorption at Saturation: 1.2 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 12 g/10 min @Load 5.00 kg, Temperature 340 °C
$ 1553/MT
- Density: 1.18 g/cc
- Water Absorption at Saturation: 0.12 %
- Linear Mold Shrinkage, Flow: 0.012 - 0.014 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 320 °C
- Tensile Strength at Break: 25.0 MPa
$ 1683/MT
- Density: 1.68 g/cc
- Moisture Absorption: 0.300 %
- Water Absorption at Saturation: 0.70 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1634/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.650 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 2252/MT
- Specific Gravity: 1.52 g/cc
- Density: 1.52 g/cc
- Melt Flow: 14.7 g/10 min @Load 6.60 kg, Temperature 337 °C
- Melt Index of Compound: 30 g/10 min @Load 10.0 kg, Temperature 345 °C
- Tensile Strength at Break: 171 MPa
$ 1753/MT
- Specific Gravity: 1.39 g/cc
- Moisture Absorption: 0.110 %
- Linear Mold Shrinkage, Flow: 0.00030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0010 cm/cm @Time 86400 sec
- Melt Flow: 69 g/10 min @Load 6.70 kg, Temperature 380 °C
$ 1553/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1471/MT
- Density: 1.30 g/cc
- Moisture Absorption: 0.170 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 16 g/10 min @Load 5.00 kg, Temperature 320 °C
$ 2003/MT
- Specific Gravity: 1.49 g/cc
- Density: 1.49 g/cc
- Moisture Absorption at Equilibrium: 0.19 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
$ 1665/MT
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 5.00 kg, Temperature 340 °C
$ 1445/MT
- Specific Gravity: 1.34 g/cc
- Melt Flow: 11.3 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 115 MPa
- Tensile Strength, Yield: 114 MPa
- Elongation at Break: 6.0 %
$ 1700/MT
- Specific Gravity: 1.48 g/cc
- Density: 1.48 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
$ 2021/MT
- Density: 1.42 g/cc
- Moisture Absorption at Equilibrium: 0.55 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Melt Flow: 7.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1687/MT
- Specific Gravity: 1.36 g/cc
- Melt Flow: 6.9 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 112 MPa
- Tensile Strength, Yield: 117 MPa
- Elongation at Break: 4.0 %
$ 2553/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Moisture Absorption: 0.550 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 1644/MT
- Density: 1.43 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1696/MT
- Density: 1.38 g/cc
- Density: 1.39 g/cc
- Moisture Absorption at Equilibrium: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.00080 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1469/MT
- Density: 1.35 g/cc
- Density: 1.35 g/cc
- Moisture Absorption: 0.210 %
- Moisture Absorption: 0.250 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.011 cm/cm @Time 86400 sec
$ 1662/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.090 %
- Water Absorption at Saturation: 0.37 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2273/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1536/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.090 %
- Water Absorption at Saturation: 0.37 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2236/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.090 %
- Water Absorption at Saturation: 0.37 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1497/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.090 %
- Water Absorption at Saturation: 0.37 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2065/MT
- Specific Gravity: 1.39 g/cc
- Density: 1.39 g/cc
- Linear Mold Shrinkage, Flow: 0.00010 - 0.00050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0010 - 0.0040 cm/cm @Time 86400 sec
- Tensile Strength at Break: 222 MPa
$ 1803/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1738/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1800/MT
- Density: 1.34 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1639/MT
- Specific Gravity: 1.67 g/cc
- Water Absorption: 0.11 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm @Thickness 3.20 mm
- Melt Flow: 3.1 g/10 min @Load 6.60 kg, Temperature 337 °C
- Hardness, Rockwell M: 85
$ 2293/MT
- Specific Gravity: 1.32 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.200 %
- Moisture Absorption: 0.300 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Time 86400 sec
$ 2326/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 10 g/10 min @Load 6.60 kg, Temperature 337 °C
- Melt Flow: 14 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1806/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
$ 1540/MT
- Density: 1.38 g/cc
- Density: 1.38 g/cc
- Moisture Absorption at Equilibrium: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0095 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0090 - 0.011 cm/cm @Time 86400 sec
$ 2240/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 2278/MT
- Specific Gravity: 1.45 g/cc
- Density: 1.45 g/cc
- Moisture Absorption at Equilibrium: 0.12 %
- Water Absorption at Saturation: 0.35 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
$ 1610/MT
- Specific Gravity: 1.51 g/cc
- Density: 1.51 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
$ 1724/MT
- Specific Gravity: 1.61 g/cc
- Water Absorption: 0.13 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.2 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1627/MT
- Specific Gravity: 1.61 g/cc
- Water Absorption: 0.13 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.2 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1685/MT
- Specific Gravity: 1.26 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2564/MT
- Specific Gravity: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 8.8 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 110 MPa
- Elongation at Break: 70 %
$ 2004/MT
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 5.00 kg, Temperature 340 °C
$ 1469/MT
- Specific Gravity: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 16 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 110 MPa
- Elongation at Break: 70 %
$ 2318/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.36 g/cc
- Moisture Absorption at Equilibrium: 0.65 %
- Water Absorption at Saturation: 1.2 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
$ 1565/MT
- Specific Gravity: 1.48 g/cc
- Melt Flow: 10.3 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 129 MPa
- Elongation at Break: 3.0 %
- Flexural Strength: 193 MPa
$ 1465/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1550/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.36 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1683/MT
- Specific Gravity: 1.49 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.2 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 155 MPa
- Elongation at Break: 3.0 %
$ 2052/MT
- Specific Gravity: 1.25 g/cc
- Density: 1.25 g/cc
- Moisture Absorption at Equilibrium: 0.50 %
- Water Absorption at Saturation: 0.90 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
$ 1666/MT
- Specific Gravity: 1.29 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 8.1 g/10 min @Load 6.60 kg, Temperature 295 °C
- Tensile Strength at Break: 82.0 MPa
- Tensile Strength, Yield: 110 MPa
$ 1466/MT
- Density: 1.506 g/cc
- Density: 1.51 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0052 cm/cm
- Tensile Strength at Break: 156 MPa
$ 1575/MT
- Specific Gravity: 1.52 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.0 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 165 MPa
- Elongation at Break: 3.0 %
$ 1519/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.36 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2594/MT
- Specific Gravity: 1.42 g/cc
- Melt Flow: 2.3 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 131 MPa
- Elongation at Break: 5.0 %
- Tensile Modulus: 6.89 GPa
$ 1916/MT
- Density: 1.51 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1611/MT
- Specific Gravity: 1.43 g/cc
- Density: 1.43 g/cc
- Moisture Absorption at Equilibrium: 0.25 %
- Water Absorption at Saturation: 0.67 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
$ 1488/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption at Equilibrium: 0.080 %
- Water Absorption at Saturation: 0.36 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1947/MT
- Specific Gravity: 1.48 g/cc
- Density: 1.48 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
$ 2124/MT
- Density: 1.61 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm
- Tensile Strength at Break: 188 MPa
- Elongation at Break: 1.6 %
- Tensile Modulus: 14.0 GPa
$ 1547/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.25 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2439/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption: 0.700 %
- Moisture Absorption at Equilibrium: 1.25 %
$ 1821/MT
- Specific Gravity: 1.69 g/cc
- Density: 1.69 g/cc
- Moisture Absorption: 0.0400 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm @Thickness 3.20 mm
$ 1659/MT
- Density: 1.38 g/cc
- Density: 1.388 g/cc
- Moisture Absorption: 0.190 %
- Moisture Absorption: 0.280 %
- Linear Mold Shrinkage, Flow: 0.0010 cm/cm @Time 86400 sec
$ 2115/MT
- Specific Gravity: 1.43 g/cc
- Density: 1.43 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
$ 1530/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 17.8 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1607/MT
- Specific Gravity: 1.44 g/cc
- Density: 1.43 g/cc
- Moisture Absorption: 0.110 %
- Linear Mold Shrinkage, Flow: 0.00010 - 0.00050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0010 - 0.0050 cm/cm @Time 86400 sec
$ 1475/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1665/MT
- Specific Gravity: 1.49 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.2 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 155 MPa
- Elongation at Break: 3.0 %
$ 1535/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.65 %
- Water Absorption at Saturation: 1.75 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1549/MT
- Specific Gravity: 1.52 g/cc
- Density: 1.52 g/cc
- Melt Flow: 14.7 g/10 min @Load 6.60 kg, Temperature 337 °C
- Melt Flow: 30 g/10 min @Load 10.0 kg, Temperature 345 °C
- Tensile Strength at Break: 171 MPa
$ 1605/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption at Equilibrium: 0.080 %
- Water Absorption at Saturation: 0.36 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2224/MT
- Specific Gravity: 1.49 g/cc
- Density: 1.49 g/cc
- Moisture Absorption at Equilibrium: 0.19 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
$ 2542/MT
- Density: 1.49 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Melt Index of Compound: 6.0 g/10 min @Load 5.00 kg, Temperature 360 °C
- Hardness, H358/30: 160 MPa
- Tensile Strength at Break: 165 MPa
$ 1519/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1476/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 9.0 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1764/MT
- Specific Gravity: 1.43 g/cc
- Density: 1.43 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
$ 1601/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
$ 1885/MT
- Specific Gravity: 1.51 g/cc
- Density: 1.51 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
$ 1601/MT
- Specific Gravity: 1.32 g/cc
- Linear Mold Shrinkage, Flow: 0.0012 - 0.0022 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 7.5 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 131 MPa
$ 1576/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 12 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 2175/MT
- Specific Gravity: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 24 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 96.0 MPa
- Elongation at Break: 70 %
$ 1556/MT
- Specific Gravity: 1.39 g/cc
- Moisture Absorption: 0.110 %
- Linear Mold Shrinkage, Flow: 0.00030 - 0.0010 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0010 - 0.0060 cm/cm @Time 86400 sec
- Melt Flow: 22 g/10 min @Load 6.70 kg, Temperature 380 °C
$ 1854/MT
- Specific Gravity: 1.34 g/cc
- Water Absorption: 0.21 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 7.8 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 2476/MT
- Specific Gravity: 1.18 g/cc
- Moisture Absorption: <= 0.000 %
- Halogen Content: 0.00 %
- Melt Flow: 12 g/10 min @Load 6.60 kg, Temperature 295 °C
- Tensile Strength at Break: 37.0 MPa
$ 1975/MT
- Density: 1.36 g/cc
- Density: 1.36 g/cc
- Moisture Absorption: 0.180 %
- Moisture Absorption: 0.180 %
- Tensile Strength at Break: 179 MPa
$ 1613/MT
- Density: 1.61 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 1.9 %
- Flexural Strength: 200 MPa
$ 1500/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 10 g/10 min @Load 6.60 kg, Temperature 337 °C
- Melt Flow: 14 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1771/MT
- Density: 1.36 g/cc
- Density: 1.365 g/cc
- Moisture Absorption: 0.160 %
- Moisture Absorption: 0.230 %
- Linear Mold Shrinkage, Flow: 0.00050 - 0.0030 cm/cm @Time 86400 sec
$ 1540/MT
- Specific Gravity: 1.43 g/cc
- Density: 1.43 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
$ 1492/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1823/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1609/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 9.7 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1604/MT
- Specific Gravity: 1.56 g/cc
- Density: 1.56 g/cc
- Moisture Absorption: 0.400 %
- Water Absorption at Saturation: 0.80 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
$ 1608/MT
- Specific Gravity: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 16 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 110 MPa
- Elongation at Break: 70 %
$ 1519/MT
- Density: 1.42 g/cc
- Moisture Absorption: 0.550 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Melt Index of Compound: 7.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1636/MT
- Density: 1.52 g/cc
- Density: 1.53 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0042 cm/cm @Time 86400 sec
$ 1579/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1574/MT
- Specific Gravity: 1.45 g/cc
- Density: 1.45 g/cc
- Moisture Absorption at Equilibrium: 0.12 %
- Water Absorption at Saturation: 0.35 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
$ 1497/MT
- Specific Gravity: 1.61 g/cc
- Density: 1.61 g/cc
- Moisture Absorption: 0.400 %
- Water Absorption at Saturation: 0.80 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.20 mm
$ 2295/MT
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 2094/MT
- Density: 1.62 g/cc
- Density: 1.62 g/cc
- Moisture Absorption: 0.150 %
- Moisture Absorption: 0.220 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1481/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2099/MT
- Specific Gravity: 1.51 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 1.8 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 165 MPa
- Elongation at Break: 3.0 %
$ 2084/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.36 g/cc
- Moisture Absorption at Equilibrium: 0.65 %
- Water Absorption at Saturation: 1.2 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1819/MT
- Specific Gravity: 1.30 g/cc
- Halogen Content: 0.00 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 1.4 g/10 min @Load 6.60 kg, Temperature 295 °C
$ 2030/MT
- Density: 1.53 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Melt Flow: 7.5 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1532/MT
- Density: 1.60 g/cc
- Density: 1.60 g/cc
- Moisture Absorption at Equilibrium: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
$ 2163/MT
- Specific Gravity: 1.56 g/cc
- Density: 1.56 g/cc
- Moisture Absorption: 0.400 %
- Water Absorption at Saturation: 0.80 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
$ 2504/MT
- Specific Gravity: 1.48 g/cc
- Density: 1.48 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
$ 2227/MT
- Density: 1.51 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Melt Index of Compound: 6.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1954/MT
- Density: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption at Equilibrium: 0.35 %
- Moisture Absorption at Equilibrium: 0.30 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1850/MT
- Density: 1.42 g/cc
- Moisture Absorption: 0.550 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Melt Index of Compound: 7.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1486/MT
- Density: 1.51 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 2096/MT
- Specific Gravity: 1.42 g/cc
- Water Absorption: 0.19 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.1 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.5 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1501/MT
- Specific Gravity: 1.32 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 15.6 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 88.0 MPa
$ 1629/MT
- Specific Gravity: 1.35 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 19 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 119 MPa
$ 1468/MT
- Density: 1.46 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0040 cm/cm @Time 86400 sec
- Tensile Strength at Break: 194 MPa
- Elongation at Break: 1.7 %
$ 1880/MT
- Specific Gravity: 1.48 g/cc
- Moisture Absorption: 0.180 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 146 MPa
- Elongation at Break: 2.3 %
$ 1642/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Moisture Absorption: 0.550 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 1559/MT
- Density: 1.62 g/cc
- Density: 1.62 g/cc
- Moisture Absorption: 0.150 %
- Moisture Absorption: 0.220 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1549/MT
- Specific Gravity: 1.45 g/cc
- Melt Flow: 5.5 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 144 MPa
- Tensile Strength, Yield: 137 MPa
- Elongation at Break: 3.0 %
$ 1654/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.36 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.70 %
- Moisture Absorption at Equilibrium: 1.25 % @Temperature 23.0 °C
$ 1586/MT
- Specific Gravity: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 16 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 110 MPa
- Elongation at Break: 70 %
$ 1500/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1619/MT
- Specific Gravity: 1.26 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.50 %
- Water Absorption at Saturation: 0.90 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1776/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 17.8 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1473/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1655/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2432/MT
- Specific Gravity: 1.25 g/cc
- Density: 1.25 g/cc
- Moisture Absorption at Equilibrium: 0.50 %
- Water Absorption at Saturation: 0.90 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
$ 1838/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 9.7 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1726/MT
- Specific Gravity: 1.44 g/cc
- Melt Flow: 10 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 131 MPa
- Tensile Modulus: 6.96 GPa
- Flexural Strength: 193 MPa
$ 2115/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1641/MT
- Density: 1.44 g/cc
- Linear Mold Shrinkage, Flow: 0.00010 - 0.00050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0010 - 0.0050 cm/cm @Time 86400 sec
- Tensile Strength, Yield: 211 MPa
- Elongation at Break: 0.90 %
$ 2315/MT
- Specific Gravity: 1.49 g/cc
- Density: 1.49 g/cc
- Moisture Absorption at Equilibrium: 0.19 %
- Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
$ 1775/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.650 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 2384/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Water Absorption: 0.26 % @Time 86400 sec
- Moisture Absorption: 0.550 %
- Water Absorption at Saturation: 1.0 %
$ 1462/MT
- Density: 1.54 g/cc
- Density: 1.54 g/cc
- Moisture Absorption: 0.170 %
- Moisture Absorption: 0.230 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
$ 1492/MT
- Specific Gravity: 1.39 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 13 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 137 MPa
$ 1520/MT
- Specific Gravity: 1.26 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.50 %
- Water Absorption at Saturation: 0.90 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1678/MT
- Density: 1.351 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.00050 - 0.0015 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0045 cm/cm @Time 86400 sec
- Tensile Strength at Break: 224 MPa
$ 1571/MT
- Specific Gravity: 1.34 g/cc
- Melt Flow: 11.5 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 115 MPa
- Tensile Strength, Yield: 114 MPa
- Elongation at Break: 6.0 %
$ 2366/MT
- Specific Gravity: 1.35 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 19 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 119 MPa
$ 1658/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1547/MT
- Specific Gravity: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 26.5 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 96.0 MPa
- Elongation at Break: 70 %
$ 1653/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Tensile Strength at Break: 165 MPa
- Elongation at Break: 1.6 %
- Flexural Strength: 248 MPa
$ 1749/MT
- Specific Gravity: 1.33 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 9.5 g/10 min @Load 6.60 kg, Temperature 337 °C
- Hardness, Rockwell M: 110
- Tensile Strength, Yield: 103 MPa
$ 2068/MT
- Density: 1.28 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1501/MT
- Density: 1.60 g/cc
- Density: 1.60 g/cc
- Moisture Absorption at Equilibrium: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
$ 1981/MT
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1606/MT
- Density: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1596/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.36 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.70 %
- Moisture Absorption at Equilibrium: 1.25 % @Temperature 23.0 °C
$ 1539/MT
- Specific Gravity: 1.21 g/cc
- Density: 1.21 g/cc
- Moisture Absorption at Equilibrium: 0.25 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1531/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
$ 1607/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption: 0.0900 %
- Water Absorption at Saturation: 0.37 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1564/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1631/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Water Absorption: 0.19 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.55 %
- Moisture Absorption at Equilibrium: 1.1 % @Temperature 23.0 °C
$ 1699/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.53 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption: 0.0400 %
- Linear Mold Shrinkage, Flow: 0.0039 cm/cm
$ 1682/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption: 0.700 %
- Moisture Absorption at Equilibrium: 1.25 %
$ 1796/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.190 %
- Moisture Absorption: 0.260 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Time 86400 sec
$ 1572/MT
- Specific Gravity: 1.34 g/cc
- Water Absorption: 0.21 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.2 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 7.0 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1734/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1714/MT
- Density: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption at Equilibrium: 0.35 %
- Moisture Absorption at Equilibrium: 0.30 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1966/MT
- Specific Gravity: 1.26 g/cc
- Density: 1.26 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 2242/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 10 g/10 min @Load 6.60 kg, Temperature 337 °C
- Melt Flow: 14 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 2312/MT
- Density: 1.57 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0040 cm/cm @Time 86400 sec
- Tensile Strength at Break: 185 MPa
- Elongation at Break: 1.5 %
$ 1651/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1538/MT
- Specific Gravity: 1.42 g/cc
- Water Absorption: 0.19 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.1 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.0 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1497/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 17.8 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1572/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption at Equilibrium: 0.080 %
- Water Absorption at Saturation: 0.36 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2552/MT
- Density: 0.0800 g/cc
- Water Absorption: 4.0 %
- Tensile Strength: 1.70 MPa
- Tensile Modulus: 0.0370 GPa
- Compressive Strength: 1.20 MPa
$ 1628/MT
- Specific Gravity: 1.51 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 1.8 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 165 MPa
- Elongation at Break: 3.0 %
$ 1692/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.36 g/cc
- Moisture Absorption at Equilibrium: 0.65 %
- Water Absorption at Saturation: 1.2 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1459/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
$ 1742/MT
- Specific Gravity: 1.32 g/cc
- Linear Mold Shrinkage, Flow: 0.0012 - 0.0022 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 7.5 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 131 MPa
$ 1681/MT
- Specific Gravity: 1.46 g/cc
- Density: 1.46 g/cc
- Moisture Absorption: 0.190 %
- Moisture Absorption: 0.270 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Time 86400 sec
$ 1460/MT
- Density: 1.27 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 16 g/10 min @Load 5.00 kg, Temperature 340 °C
$ 1960/MT
- Density: 1.48 g/cc
- Density: 1.50 g/cc
- Linear Mold Shrinkage, Flow: 0.00040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm @Time 86400 sec
- Tensile Strength at Break: 160 MPa
$ 2067/MT
- Density: 1.52 g/cc
- Tensile Strength at Break: 166 MPa
- Elongation at Break: 2.3 %
- Tensile Modulus: 10.34 GPa
- Flexural Strength: 262 MPa
$ 1712/MT
- Density: 1.61 g/cc
- Moisture Absorption: 0.400 %
- Water Absorption at Saturation: 0.80 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 2490/MT
- Specific Gravity: 1.51 g/cc
- Water Absorption: 0.16 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.3 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 2087/MT
- Specific Gravity: 1.69 g/cc
- Density: 1.69 g/cc
- Moisture Absorption: 0.0400 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm @Thickness 3.20 mm
$ 1446/MT
- Specific Gravity: 1.28 g/cc
- Water Absorption: 0.16 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.2 g/10 min @Load 6.60 kg, Temperature 337 °C
- Hardness, Rockwell R: 123
$ 1762/MT
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1936/MT
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 2038/MT
- Density: 1.36 g/cc
- Moisture Absorption: 0.650 %
- Water Absorption at Saturation: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 12 g/10 min @Load 5.00 kg, Temperature 340 °C
$ 1595/MT
- Specific Gravity: 1.60 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Time 86400 sec
- Tensile Strength at Break: 187 MPa
- Elongation at Break: 1.5 %
$ 2020/MT
- Specific Gravity: 1.66 g/cc
- Linear Mold Shrinkage, Flow: 0.0015 - 0.0025 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 2.7 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 131 MPa
$ 1771/MT
- Specific Gravity: 1.32 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.9 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 119 MPa
- Tensile Strength, Yield: 110 MPa
$ 1585/MT
- Specific Gravity: 1.38 g/cc
- Water Absorption: 0.26 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 127 MPa
- Elongation at Break: 5.0 %
$ 2250/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.650 %
- Water Absorption at Saturation: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2105/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1685/MT
- Specific Gravity: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 24 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 96.0 MPa
- Elongation at Break: 70 %
$ 1559/MT
- Density: 1.48 g/cc
- Density: 1.50 g/cc
- Linear Mold Shrinkage, Flow: 0.00040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm @Time 86400 sec
- Tensile Strength at Break: 160 MPa
$ 1721/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 17.8 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1824/MT
- Density: 1.43 g/cc
- Density: 1.43 g/cc
- Moisture Absorption at Equilibrium: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0058 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
$ 1953/MT
- Specific Gravity: 1.43 g/cc
- Density: 1.43 g/cc
- Moisture Absorption at Equilibrium: 0.25 %
- Water Absorption at Saturation: 0.67 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
$ 1813/MT
- Specific Gravity: 1.30 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 127 MPa
- Elongation at Break: 6.0 %
- Flexural Strength: 186 MPa
$ 1603/MT
- Specific Gravity: 1.32 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 15.6 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 88.0 MPa
$ 2089/MT
- Density: 1.43 g/cc
- Density: 1.43 g/cc
- Moisture Absorption: 0.190 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
$ 2171/MT
- Density: 1.43 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 8.0 %
- Tensile Modulus: 4.50 GPa
$ 1742/MT
- Density: 1.21 g/cc
- Moisture Absorption at Equilibrium: 0.25 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 35 g/10 min @Load 5.00 kg, Temperature 340 °C
$ 1488/MT
- Density: 1.38 g/cc
- Density: 1.388 g/cc
- Moisture Absorption: 0.190 %
- Moisture Absorption: 0.280 %
- Linear Mold Shrinkage, Flow: 0.0010 cm/cm @Time 86400 sec
$ 2187/MT
- Specific Gravity: 1.34 g/cc
- Water Absorption: 0.26 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 204 MPa
- Elongation at Break: 6.0 %
$ 2398/MT
- Density: 1.53 g/cc
- Density: 1.53 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Time 86400 sec
- Tensile Strength at Break: 169 MPa
$ 1609/MT
- Specific Gravity: 1.34 g/cc
- Melt Flow: 11.5 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 115 MPa
- Tensile Strength, Yield: 114 MPa
- Elongation at Break: 6.0 %
$ 1716/MT
- Density: 1.35 g/cc
- Linear Mold Shrinkage, Flow: 0.00050 - 0.0025 cm/cm
- Tensile Strength at Break: 195 MPa
- Elongation at Break: 1.7 %
- Tensile Modulus: 15.2 GPa
$ 1574/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 10 g/10 min @Load 6.60 kg, Temperature 337 °C
- Melt Index of Compound: 14 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1537/MT
- Specific Gravity: 1.66 g/cc
- Linear Mold Shrinkage, Flow: 0.0015 - 0.0025 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.6 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 131 MPa
$ 1672/MT
- Density: 1.27 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm
- Melt Flow: 24 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 2132/MT
- Specific Gravity: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 11.2 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 110 MPa
- Elongation at Break: 70 %
$ 1719/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 17.8 g/10 min @Load 6.60 kg, Temperature 337 °C
- Hardness, Rockwell M: 109
$ 2222/MT
- Specific Gravity: 1.52 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.0 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 165 MPa
- Elongation at Break: 3.0 %
$ 2084/MT
- Specific Gravity: 1.38 g/cc
- Density: 1.365 g/cc
- Density: 1.37 g/cc
- Moisture Absorption: 0.170 %
- Moisture Absorption: 0.270 %
$ 1451/MT
- Specific Gravity: 1.61 g/cc
- Density: 1.61 g/cc
- Moisture Absorption: 0.400 %
- Water Absorption at Saturation: 0.80 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.20 mm
$ 1513/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Water Absorption at Saturation: 0.76 %
- Linear Mold Shrinkage, Flow: 0.0087 - 0.0092 cm/cm @Thickness 3.20 mm
- Melt Flow: 7.0 g/10 min @Load 6.60 kg, Temperature 295 °C
$ 1552/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 9.7 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1570/MT
- Density: 1.35 g/cc
- Density: 1.35 g/cc
- Moisture Absorption: 0.210 %
- Moisture Absorption: 0.250 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.011 cm/cm @Time 86400 sec
$ 1683/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.60 %
- Water Absorption at Saturation: 1.75 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1623/MT
- Specific Gravity: 1.42 g/cc
- Melt Flow: 9.0 g/10 min @Load 6.60 kg, Temperature 337 °C
- Hardness, Rockwell M: 114
- Tensile Strength at Break: 139 MPa
- Elongation at Break: 4.0 %
$ 1557/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm
- Tensile Strength at Break: 144 MPa
- Elongation at Break: 1.6 %
- Tensile Modulus: 8.50 GPa
$ 1519/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.36 g/cc
- Moisture Absorption at Equilibrium: 0.65 %
- Water Absorption at Saturation: 1.2 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1829/MT
- Density: 1.34 - 1.40 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm @Time 86400 sec
- Tensile Strength at Break: 90.0 MPa
- Tensile Strength at Break: 90.0 MPa
$ 1546/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 9.0 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1585/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.25 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1582/MT
- Density: 1.33 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.1 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1536/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption: 0.700 %
- Moisture Absorption at Equilibrium: 1.25 %
$ 1972/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1627/MT
- Specific Gravity: 1.48 g/cc
- Density: 1.48 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
$ 1765/MT
- Specific Gravity: 1.52 g/cc
- Water Absorption: 0.18 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.98 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0045 - 0.0055 cm/cm @Thickness 3.20 mm
$ 2057/MT
- Density: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption: 0.100 %
- Moisture Absorption: 0.250 %
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Time 86400 sec
$ 1980/MT
- Specific Gravity: 1.27 g/cc
- Halogen Content: 0.00 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 1.6 g/10 min @Load 6.60 kg, Temperature 295 °C
$ 2121/MT
- Specific Gravity: 1.21 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.0 g/10 min @Load 6.60 kg, Temperature 295 °C
- Tensile Strength, Yield: 68.0 MPa
- Elongation at Break: 80 %
$ 2588/MT
- Specific Gravity: 1.51 g/cc
- Water Absorption: 0.16 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
$ 1459/MT
- Density: 1.37 g/cc
- Moisture Absorption: 0.650 %
- Water Absorption at Saturation: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 12 g/10 min @Load 5.00 kg, Temperature 340 °C
$ 1482/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0070 - 0.0090 cm/cm @Time 86400 sec
- Tensile Strength at Break: 52.0 MPa
$ 1953/MT
- Density: 1.36 g/cc
- Moisture Absorption: 0.650 %
- Water Absorption at Saturation: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 12 g/10 min @Load 5.00 kg, Temperature 340 °C
$ 2466/MT
- Density: 1.61 g/cc
- Moisture Absorption: 0.400 %
- Water Absorption at Saturation: 0.80 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm
- Melt Index of Compound: 7.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 2449/MT
- Specific Gravity: 1.51 g/cc
- Density: 1.51 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
$ 1748/MT
- Specific Gravity: 1.48 g/cc
- Melt Flow: 10.3 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 129 MPa
- Elongation at Break: 3.0 %
- Flexural Strength: 193 MPa
$ 1837/MT
- Specific Gravity: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 26.5 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 96.0 MPa
- Elongation at Break: 70 %
$ 1509/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Moisture Absorption at Equilibrium: 0.22 %
- Water Absorption at Saturation: 0.58 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
$ 1530/MT
- Specific Gravity: 1.38 g/cc
- Melt Flow: 6.8 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 124 MPa
- Elongation at Break: 4.0 %
- Tensile Modulus: 5.03 GPa
$ 1730/MT
- Specific Gravity: 1.21 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.4 g/10 min @Load 6.60 kg, Temperature 295 °C
- Tensile Strength, Yield: 68.0 MPa
- Elongation at Break: 80 %
$ 1633/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Moisture Absorption: 0.550 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 1747/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Melt Flow: 12.3 g/10 min @Load 6.60 kg, Temperature 337 °C
- Melt Index of Compound: 10 g/10 min @Load 5.00 kg, Temperature 340 °C
- Tensile Strength at Break: 89.0 MPa
$ 1594/MT
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1470/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.36 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2526/MT
- Specific Gravity: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 8.8 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 110 MPa
- Elongation at Break: 70 %
$ 1671/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Water Absorption: 0.14 % @Time 86400 sec
- Moisture Absorption: 0.0500 %
- Linear Mold Shrinkage, Flow: 0.0046 cm/cm
$ 1595/MT
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 5.00 kg, Temperature 340 °C
$ 1838/MT
- Density: 1.36 g/cc
- Density: 1.365 g/cc
- Moisture Absorption: 0.160 %
- Moisture Absorption: 0.230 %
- Linear Mold Shrinkage, Flow: 0.00050 - 0.0030 cm/cm @Time 86400 sec
$ 1800/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 12 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1878/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 10 g/10 min @Load 6.60 kg, Temperature 337 °C
- Melt Index of Compound: 14 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 2110/MT
- Specific Gravity: 1.29 g/cc
- Density: 1.29 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 1.03 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1925/MT
- Specific Gravity: 1.29 g/cc
- Density: 1.29 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 1.03 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1781/MT
- Specific Gravity: 1.61 g/cc
- Water Absorption: 0.13 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.5 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1720/MT
- Density: 1.387 g/cc
- Moisture Absorption at Equilibrium: 0.18 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0025 - 0.0031 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0036 - 0.0042 cm/cm @Time 86400 sec
- Tensile Strength at Break: 188 MPa
$ 1634/MT
- Specific Gravity: 1.42 g/cc
- Melt Flow: 5.1 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 137 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 6.89 GPa
$ 1854/MT
- Specific Gravity: 1.47 g/cc
- Density: 1.47 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
$ 1647/MT
- Density: 1.38 g/cc
- Density: 1.39 g/cc
- Moisture Absorption at Equilibrium: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.00080 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1782/MT
- Specific Gravity: 1.48 g/cc
- Density: 1.48 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
$ 1455/MT
- Specific Gravity: 1.34 g/cc
- Water Absorption: 0.21 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 7.0 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1693/MT
- Density: 1.39 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0015 - 0.0025 cm/cm @Time 86400 sec
- Tensile Strength at Break: 211 MPa
$ 2274/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 10 g/10 min @Load 6.60 kg, Temperature 337 °C
- Melt Index of Compound: 14 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1489/MT
- Specific Gravity: 1.34 g/cc
- Water Absorption: 0.21 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 7.0 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1608/MT
- Density: 1.51 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Melt Index of Compound: 12 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 2302/MT
- Specific Gravity: 1.34 g/cc
- Water Absorption: 0.21 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 7.0 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1445/MT
- Specific Gravity: 1.29 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.170 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1867/MT
- Specific Gravity: 1.61 g/cc
- Density: 1.56 g/cc
- Water Absorption: 0.13 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.40 %
- Moisture Absorption at Equilibrium: 0.90 % @Temperature 23.0 °C
$ 1667/MT
- Specific Gravity: 1.29 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 8.1 g/10 min @Load 6.60 kg, Temperature 295 °C
- Tensile Strength at Break: 82.0 MPa
- Tensile Strength, Yield: 110 MPa
$ 1621/MT
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Melt Flow: 13 g/10 min @Load 5.00 kg, Temperature 340 °C
- Melt Flow: 25 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1457/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 10 g/10 min @Load 6.60 kg, Temperature 337 °C
- Melt Index of Compound: 14 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1824/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1524/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1763/MT
- Specific Gravity: 1.52 g/cc
- Water Absorption: 0.18 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.98 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0045 - 0.0055 cm/cm @Thickness 3.20 mm
$ 1648/MT
- Specific Gravity: 1.66 g/cc
- Linear Mold Shrinkage, Flow: 0.0015 - 0.0025 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.6 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 131 MPa
$ 1807/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.42 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
$ 1598/MT
- Density: 0.110 g/cc
- Water Absorption: 4.0 %
- Tensile Strength: 2.10 MPa
- Tensile Modulus: 0.0400 GPa
- Compressive Strength: 1.70 MPa
$ 1570/MT
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 5.00 kg, Temperature 340 °C
$ 2117/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.36 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2199/MT
- Specific Gravity: 1.42 g/cc
- Water Absorption: 0.19 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.1 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.5 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1850/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.650 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1984/MT
- Density: 1.51 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Melt Index of Compound: 6.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1607/MT
- Specific Gravity: 1.42 g/cc
- Melt Flow: 2.3 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 131 MPa
- Elongation at Break: 5.0 %
- Tensile Modulus: 6.89 GPa
$ 1542/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.170 %
- Water Absorption at Saturation: 0.39 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2348/MT
- Specific Gravity: 1.28 g/cc
- Water Absorption: 0.16 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.2 g/10 min @Load 6.60 kg, Temperature 337 °C
- Hardness, Rockwell R: 123
$ 1961/MT
- Specific Gravity: 1.33 g/cc
- Moisture Absorption: 0.230 %
- Tensile Strength at Break: 230 MPa
- Elongation at Break: 1.8 %
- Tensile Modulus: 17.38 GPa
$ 2087/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1898/MT
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 5.00 kg, Temperature 340 °C
$ 1783/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1700/MT
- Density: 1.34 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 9.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1626/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 17.8 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1942/MT
- Specific Gravity: 1.61 g/cc
- Water Absorption: 0.13 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.2 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 2143/MT
- Density: 1.37 g/cc
- Moisture Absorption: 0.650 %
- Water Absorption at Saturation: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 12 g/10 min @Load 5.00 kg, Temperature 340 °C
$ 1597/MT
- Specific Gravity: 1.44 g/cc
- Density: 1.44 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Moisture Absorption: 0.0700 %
- Linear Mold Shrinkage, Flow: 0.0046 cm/cm
$ 1643/MT
- Specific Gravity: 1.69 g/cc
- Density: 1.69 g/cc
- Moisture Absorption: 0.0400 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm @Thickness 3.20 mm
$ 1505/MT
- Density: 1.35 g/cc
- Tensile Strength at Break: 185 MPa
- Elongation at Break: 1.7 %
- Tensile Modulus: 15.58 GPa
- Flexural Strength: 262 MPa
$ 1565/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.70 %
- Moisture Absorption at Equilibrium: 1.25 % @Temperature 23.0 °C
$ 1611/MT
- Density: 1.37 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Time 86400 sec
- Tensile Strength at Break: 191 MPa
- Elongation at Break: 1.3 %
$ 1861/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 9.0 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1773/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.29 g/cc
- Moisture Absorption: 0.250 %
- Moisture Absorption: 0.350 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
$ 1778/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.65 %
- Water Absorption at Saturation: 1.75 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1588/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 9.0 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 2064/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 9.0 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 2373/MT
- Specific Gravity: 1.56 g/cc
- Density: 1.56 g/cc
- Moisture Absorption at Equilibrium: 0.40 %
- Water Absorption at Saturation: 0.80 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
$ 1775/MT
- Density: 1.38 g/cc
- Density: 1.38 g/cc
- Moisture Absorption at Equilibrium: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0095 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0090 - 0.011 cm/cm @Time 86400 sec
$ 2287/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 10 g/10 min @Load 6.60 kg, Temperature 337 °C
- Melt Index of Compound: 14 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 2296/MT
- Density: 1.35 g/cc
- Density: 1.35 g/cc
- Moisture Absorption: 0.210 %
- Moisture Absorption: 0.250 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.011 cm/cm @Time 86400 sec
$ 1513/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.25 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1644/MT
- Specific Gravity: 1.43 g/cc
- Melt Flow: 13.5 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 92.0 MPa
- Elongation at Break: 6.0 %
- Tensile Modulus: 4.27 GPa
$ 1573/MT
- Specific Gravity: 1.29 g/cc
- Density: 1.29 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 1.03 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1497/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Water Absorption: 0.19 % @Time 86400 sec
- Moisture Absorption: 0.550 %
- Moisture Absorption at Equilibrium: 1.1 %
$ 1594/MT
- Density: 1.34 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 9.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1817/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
$ 1719/MT
- Density: 1.34 g/cc
- Moisture Absorption at Equilibrium: 0.60 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 13 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1581/MT
- Specific Gravity: 1.34 g/cc
- Water Absorption: 0.21 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 7.0 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 2463/MT
- Specific Gravity: 1.21 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.0 g/10 min @Load 6.60 kg, Temperature 295 °C
- Tensile Strength, Yield: 68.0 MPa
- Elongation at Break: 80 %
$ 1582/MT
- Specific Gravity: 1.28 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 11 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 99.0 MPa
- Elongation at Break: 60 %
$ 1444/MT
- Specific Gravity: 1.36 g/cc
- Melt Flow: 6.9 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 112 MPa
- Tensile Strength, Yield: 117 MPa
- Elongation at Break: 4.0 %
$ 1534/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Moisture Absorption: 0.550 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 1916/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Moisture Absorption at Equilibrium: 0.22 %
- Water Absorption at Saturation: 0.58 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
$ 2026/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 10 g/10 min @Load 6.60 kg, Temperature 337 °C
- Melt Index of Compound: 14 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 2141/MT
- Density: 0.0800 g/cc
- Water Absorption: 4.0 %
- Tensile Strength: 1.70 MPa
- Tensile Modulus: 0.0370 GPa
- Compressive Strength: 1.20 MPa
$ 1613/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1814/MT
- Specific Gravity: 1.48 g/cc
- Water Absorption: 0.18 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 125 MPa
- Elongation at Break: 3.0 %
$ 1860/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.36 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1453/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.170 %
- Water Absorption at Saturation: 0.39 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2002/MT
- Specific Gravity: 1.32 g/cc
- Linear Mold Shrinkage, Flow: 0.0012 - 0.0022 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 7.5 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 131 MPa
$ 1936/MT
- Specific Gravity: 1.52 g/cc
- Density: 1.52 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption: 0.0600 %
- Melt Flow: 14.7 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1893/MT
- Specific Gravity: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 8.8 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 110 MPa
- Elongation at Break: 70 %
$ 1843/MT
- Density: 1.28 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 7.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1493/MT
- Specific Gravity: 1.29 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 2.7 g/10 min @Load 6.60 kg, Temperature 295 °C
- Tensile Strength at Break: 89.0 MPa
$ 1472/MT
- Density: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1654/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2023/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2222/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1476/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1873/MT
- Specific Gravity: 1.39 g/cc
- Density: 1.39 g/cc
- Moisture Absorption: 0.140 %
- Moisture Absorption: 0.240 %
- Linear Mold Shrinkage, Flow: 0.00020 - 0.00040 cm/cm @Time 86400 sec
$ 1633/MT
- Specific Gravity: 1.51 g/cc
- Density: 1.51 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
$ 1844/MT
- Specific Gravity: 1.30 g/cc
- Halogen Content: 0.00 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 2.4 g/10 min @Load 6.60 kg, Temperature 295 °C
$ 1769/MT
- Specific Gravity: 1.51 g/cc
- Water Absorption: 0.16 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
$ 1462/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Water Absorption: 0.26 % @Time 86400 sec
- Moisture Absorption: 0.550 %
- Water Absorption at Saturation: 1.0 %
$ 2333/MT
- Specific Gravity: 1.30 g/cc
- Moisture Absorption: 0.240 %
- Tensile Strength at Break: 197 MPa
- Elongation at Break: 2.4 %
- Tensile Modulus: 11.22 GPa
$ 1715/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
$ 1471/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1548/MT
- Density: 1.43 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 8.0 %
- Tensile Modulus: 4.50 GPa
$ 2383/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Water Absorption: 0.19 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.55 %
- Moisture Absorption at Equilibrium: 1.1 % @Temperature 23.0 °C
$ 2302/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1842/MT
- Specific Gravity: 1.56 g/cc
- Density: 1.56 g/cc
- Moisture Absorption: 0.400 %
- Water Absorption at Saturation: 0.80 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
$ 2409/MT
- Specific Gravity: 1.21 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.0 g/10 min @Load 6.60 kg, Temperature 295 °C
- Tensile Strength, Yield: 68.0 MPa
- Elongation at Break: 80 %
$ 1977/MT
- Specific Gravity: 1.43 g/cc
- Melt Flow: 13.5 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 92.0 MPa
- Elongation at Break: 6.0 %
- Tensile Modulus: 4.27 GPa
$ 1522/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1614/MT
- Specific Gravity: 1.51 g/cc
- Density: 1.51 g/cc
- Water Absorption: 0.16 % @Time 86400 sec
- Moisture Absorption: 0.500 %
- Moisture Absorption at Equilibrium: 0.90 %
$ 1460/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.36 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1488/MT
- Specific Gravity: 1.51 g/cc
- Water Absorption: 0.16 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 5.3 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1481/MT
- Density: 1.36 g/cc
- Density: 1.365 g/cc
- Moisture Absorption: 0.160 %
- Moisture Absorption: 0.230 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 2045/MT
- Density: 1.52 g/cc
- Density: 1.528 g/cc
- Moisture Absorption: 0.150 %
- Moisture Absorption: 0.210 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Time 86400 sec
$ 1833/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Moisture Absorption at Equilibrium: 0.22 %
- Water Absorption at Saturation: 0.58 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
$ 1466/MT
- Specific Gravity: 1.46 g/cc
- Density: 1.46 g/cc
- Moisture Absorption at Equilibrium: 0.27 %
- Moisture Absorption at Equilibrium: 0.19 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Time 86400 sec
$ 1621/MT
- Density: 1.37 g/cc
- Moisture Absorption: 0.650 %
- Water Absorption at Saturation: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 12 g/10 min @Load 5.00 kg, Temperature 340 °C
$ 1940/MT
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1646/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1448/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
$ 1691/MT
- Specific Gravity: 1.61 g/cc
- Density: 1.61 g/cc
- Moisture Absorption at Equilibrium: 0.40 %
- Water Absorption at Saturation: 0.80 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.20 mm
$ 1642/MT
- Density: 1.51 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Melt Index of Compound: 6.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1717/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 2299/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1578/MT
- Specific Gravity: 1.51 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Melt Flow: 7.6 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 158 MPa
$ 2585/MT
- Specific Gravity: 1.51 g/cc
- Water Absorption: 0.18 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.98 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0045 - 0.0055 cm/cm @Thickness 3.20 mm
$ 1700/MT
- Specific Gravity: 1.41 g/cc
- Melt Flow: 10.4 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 115 MPa
- Tensile Strength, Yield: 114 MPa
- Elongation at Break: 6.0 %
$ 1464/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption: 0.700 %
- Moisture Absorption at Equilibrium: 1.25 %
$ 1758/MT
- Specific Gravity: 1.26 g/cc
- Density: 1.26 g/cc
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1563/MT
- Specific Gravity: 1.42 g/cc
- Melt Flow: 9.0 g/10 min @Load 6.60 kg, Temperature 337 °C
- Hardness, Rockwell M: 114
- Tensile Strength at Break: 139 MPa
- Elongation at Break: 4.0 %
$ 2031/MT
- Density: 1.42 g/cc
- Moisture Absorption: 0.550 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Melt Index of Compound: 10 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 2126/MT
- Density: 1.36 g/cc
- Density: 1.365 g/cc
- Moisture Absorption at Equilibrium: 0.23 %
- Moisture Absorption at Equilibrium: 0.16 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1518/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.65 %
- Water Absorption at Saturation: 1.75 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1510/MT
- Specific Gravity: 1.61 g/cc
- Density: 1.56 g/cc
- Water Absorption: 0.13 % @Time 86400 sec
- Moisture Absorption: 0.400 %
- Moisture Absorption at Equilibrium: 0.90 %
$ 2415/MT
- Specific Gravity: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 24 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 96.0 MPa
- Elongation at Break: 70 %
$ 1576/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Tensile Strength at Break: 165 MPa
- Elongation at Break: 1.6 %
- Flexural Strength: 248 MPa
$ 1556/MT
- Specific Gravity: 1.56 g/cc
- Density: 1.56 g/cc
- Moisture Absorption at Equilibrium: 0.40 %
- Water Absorption at Saturation: 0.80 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
$ 1470/MT
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 2209/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1696/MT
- Specific Gravity: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 8.8 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 110 MPa
- Elongation at Break: 70 %
$ 1825/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1805/MT
- Density: 1.388 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0025 - 0.0031 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0038 - 0.0045 cm/cm @Time 86400 sec
- Tensile Strength at Break: 210 MPa
$ 1971/MT
- Specific Gravity: 1.51 g/cc
- Density: 1.51 g/cc
- Water Absorption: 0.18 % @Time 86400 sec
- Moisture Absorption: 0.500 %
- Water Absorption at Saturation: 0.90 %
$ 1518/MT
- Specific Gravity: 1.33 g/cc
- Density: 1.33 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.1 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
$ 2506/MT
- Specific Gravity: 1.40 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 15 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 107 MPa
$ 1625/MT
- Specific Gravity: 1.29 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 2.7 g/10 min @Load 6.60 kg, Temperature 295 °C
- Tensile Strength at Break: 89.0 MPa
$ 2162/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Water Absorption: 0.58 % @Time 86400 sec
- Water Absorption at Saturation: 0.58 %
- Linear Mold Shrinkage, Flow: 0.0086 - 0.0101 cm/cm @Thickness 3.20 mm
$ 2060/MT
- Density: 1.34 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 9.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 2022/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Water Absorption at Saturation: 0.76 %
- Linear Mold Shrinkage, Flow: 0.0087 - 0.0092 cm/cm @Thickness 3.20 mm
- Melt Flow: 7.0 g/10 min @Load 6.60 kg, Temperature 295 °C
$ 1642/MT
- Specific Gravity: 1.51 g/cc
- Water Absorption: 0.18 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.98 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0045 - 0.0055 cm/cm @Thickness 3.20 mm
$ 1849/MT
- Specific Gravity: 1.38 g/cc
- Density: 1.37 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1980/MT
- Density: 1.37 g/cc
- Moisture Absorption: 0.210 %
- Moisture Absorption: 0.320 %
- Linear Mold Shrinkage, Flow: 0.0010 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0015 cm/cm @Time 86400 sec
$ 1781/MT
- Density: 1.57 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0040 cm/cm @Time 86400 sec
- Tensile Strength at Break: 185 MPa
- Elongation at Break: 1.5 %
$ 1524/MT
- Density: 1.62 g/cc
- Density: 1.62 g/cc
- Moisture Absorption: 0.150 %
- Moisture Absorption: 0.220 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1803/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1627/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.090 %
- Water Absorption at Saturation: 0.37 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2175/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.090 %
- Water Absorption at Saturation: 0.37 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1957/MT
- Specific Gravity: 1.50 g/cc
- Density: 1.46 g/cc
- Density: 1.46 g/cc
- Linear Mold Shrinkage, Flow: 0.0055 cm/cm
- Linear Mold Shrinkage, Flow: 0.0055 cm/cm @Time 86400 sec
$ 1611/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
$ 1866/MT
- Density: 1.46 g/cc
- Linear Mold Shrinkage, Flow: 0.00020 - 0.0010 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0020 - 0.0030 cm/cm @Time 86400 sec
- Tensile Strength at Break: 222 MPa
- Elongation at Break: 1.5 %
$ 1507/MT
- Specific Gravity: 1.30 g/cc
- Halogen Content: 0.00 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 2.4 g/10 min @Load 6.60 kg, Temperature 295 °C
$ 2168/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Melt Flow: 17.8 g/10 min @Load 6.60 kg, Temperature 337 °C
- Melt Index of Compound: 25 g/10 min @Load 5.00 kg, Temperature 220 °C
- Tensile Strength at Break: 85.0 MPa
$ 1712/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1468/MT
- Specific Gravity: 1.42 g/cc
- Water Absorption: 0.19 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.1 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.0 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 2287/MT
- Specific Gravity: 1.56 g/cc
- Density: 1.56 g/cc
- Moisture Absorption at Equilibrium: 0.40 %
- Water Absorption at Saturation: 0.80 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
$ 2076/MT
- Density: 1.32 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 5.00 kg, Temperature 340 °C
$ 1529/MT
- Density: 1.52 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Melt Index of Compound: 7.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 2033/MT
- Specific Gravity: 1.40 g/cc
- Tensile Strength at Break: 216 MPa
- Elongation at Break: 1.3 %
- Tensile Modulus: 21.54 GPa
- Flexural Strength: 283 MPa
$ 1919/MT
- Density: 1.51 g/cc
- Tensile Strength at Break: 169 MPa
- Elongation at Break: 2.2 %
- Tensile Modulus: 9.60 GPa
- Flexural Strength: 201 MPa
$ 1563/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1639/MT
- Density: 1.61 g/cc
- Moisture Absorption: 0.400 %
- Water Absorption at Saturation: 0.80 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1873/MT
- Specific Gravity: 1.47 g/cc
- Density: 1.47 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
$ 1591/MT
- Specific Gravity: 1.44 g/cc
- Density: 1.44 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Moisture Absorption: 0.0700 %
- Linear Mold Shrinkage, Flow: 0.0046 cm/cm
$ 2012/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.650 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1535/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption: 0.700 %
- Moisture Absorption at Equilibrium: 1.25 %
$ 1744/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption: 0.700 %
- Moisture Absorption at Equilibrium: 1.25 %
$ 1778/MT
- Density: 1.36 g/cc
- Density: 1.365 g/cc
- Moisture Absorption at Equilibrium: 0.23 %
- Moisture Absorption at Equilibrium: 0.16 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 2385/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.36 g/cc
- Moisture Absorption at Equilibrium: 0.65 %
- Water Absorption at Saturation: 1.2 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
$ 1983/MT
- Density: 1.43 g/cc
- Density: 1.43 g/cc
- Moisture Absorption at Equilibrium: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0058 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
$ 1642/MT
- Specific Gravity: 1.48 g/cc
- Density: 1.47 g/cc
- Moisture Absorption: 0.140 %
- Moisture Absorption: 0.220 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1643/MT
- Density: 1.52 g/cc
- Density: 1.53 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0042 cm/cm @Time 86400 sec
$ 2492/MT
- Specific Gravity: 1.47 g/cc
- Density: 1.47 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
$ 2207/MT
- Specific Gravity: 1.44 g/cc
- Density: 1.433 g/cc
- Moisture Absorption: 0.110 %
- Linear Mold Shrinkage, Flow: 0.00010 - 0.00050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0010 - 0.0050 cm/cm @Time 86400 sec
$ 1998/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 17.8 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 2230/MT
- Density: 1.59 g/cc
- Density: 1.59 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0070 - 0.0090 cm/cm @Time 86400 sec
- Tensile Strength at Break: 96.0 MPa
$ 1812/MT
- Specific Gravity: 1.32 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.9 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 119 MPa
- Tensile Strength, Yield: 110 MPa
$ 1676/MT
- Density: 1.52 g/cc
- Moisture Absorption at Equilibrium: 0.25 %
- Water Absorption at Saturation: 0.40 % @Temperature 23.0 °C
- Melt Flow: 19 g/10 min @Load 5.00 kg, Temperature 360 °C
- Tensile Strength at Break: 115 MPa
$ 1980/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1766/MT
- Specific Gravity: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 11.2 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 110 MPa
- Elongation at Break: 70 %
$ 1761/MT
- Density: 1.48 g/cc
- Density: 1.50 g/cc
- Linear Mold Shrinkage, Flow: 0.00040 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm @Time 86400 sec
- Tensile Strength at Break: 160 MPa
$ 1876/MT
- Specific Gravity: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 16 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 110 MPa
- Elongation at Break: 70 %
$ 1445/MT
- Density: 1.34 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1548/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Moisture Absorption at Equilibrium: 0.55 %
- Water Absorption at Saturation: 1.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 1878/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.36 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1508/MT
- Specific Gravity: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 8.8 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 110 MPa
- Elongation at Break: 70 %
$ 1723/MT
- Density: 1.52 g/cc
- Density: 1.52 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0023 cm/cm @Time 86400 sec
$ 1600/MT
- Density: 1.52 g/cc
- Density: 1.52 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0023 cm/cm @Time 86400 sec
$ 1540/MT
- Density: 1.52 g/cc
- Density: 1.52 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0023 cm/cm @Time 86400 sec
$ 2196/MT
- Density: 1.52 g/cc
- Density: 1.52 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0023 cm/cm @Time 86400 sec
$ 2017/MT
- Density: 1.52 g/cc
- Density: 1.52 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0023 cm/cm @Time 86400 sec
$ 1568/MT
- Density: 1.52 g/cc
- Density: 1.52 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0023 cm/cm @Time 86400 sec
$ 1810/MT
- Density: 1.52 g/cc
- Density: 1.52 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0023 cm/cm @Time 86400 sec
$ 2199/MT
- Specific Gravity: 1.28 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 11 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 99.0 MPa
- Elongation at Break: 60 %
$ 2314/MT
- Specific Gravity: 1.41 g/cc
- Tensile Strength at Break: 253 MPa
- Tensile Strength at Break: 267 MPa
- Elongation at Break: 0.90 %
- Elongation at Break: 1.0 %
$ 1706/MT
- Density: 1.38 g/cc
- Tensile Strength at Break: 94.0 MPa
- Elongation at Break: 3.6 %
- Tensile Modulus: 3.69 GPa
- Flexural Strength: 158 MPa
$ 1984/MT
- Density: 1.30 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 22 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1492/MT
- Specific Gravity: 1.34 g/cc
- Melt Flow: 11.3 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 115 MPa
- Tensile Strength, Yield: 114 MPa
- Elongation at Break: 6.0 %
$ 1945/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Water Absorption: 0.19 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.55 %
- Moisture Absorption at Equilibrium: 1.1 % @Temperature 23.0 °C
$ 1707/MT
- Density: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.220 %
- Linear Mold Shrinkage, Flow: 0.0066 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Time 86400 sec
$ 1469/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Water Absorption: 0.58 % @Time 86400 sec
- Water Absorption at Saturation: 0.58 %
- Linear Mold Shrinkage, Flow: 0.0086 - 0.0101 cm/cm @Thickness 3.20 mm
$ 1797/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1589/MT
- Density: 1.27 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Tensile Strength at Break: 85.0 MPa
- Tensile Strength, Yield: 105 MPa
- Elongation at Break: 60 %
$ 2153/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.36 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.70 %
- Moisture Absorption at Equilibrium: 1.25 % @Temperature 23.0 °C
$ 1774/MT
- Specific Gravity: 1.42 g/cc
- Melt Flow: 8.4 g/10 min @Load 6.60 kg, Temperature 337 °C
- Hardness, Rockwell M: 114
- Tensile Strength at Break: 139 MPa
- Elongation at Break: 4.0 %
$ 1687/MT
- Specific Gravity: 1.21 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.4 g/10 min @Load 6.60 kg, Temperature 295 °C
- Tensile Strength, Yield: 68.0 MPa
- Elongation at Break: 80 %
$ 1832/MT
- Density: 1.21 g/cc
- Moisture Absorption at Equilibrium: 0.25 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Flow: 35 g/10 min @Load 5.00 kg, Temperature 340 °C
$ 1672/MT
- Density: 1.60 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0015 cm/cm
- Tensile Strength at Break: 169 MPa
- Elongation at Break: 1.5 %
$ 2159/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 17.8 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 2152/MT
- Density: 1.31 g/cc
- Moisture Absorption: 0.300 %
- Moisture Absorption: 0.350 %
- Linear Mold Shrinkage, Flow: 0.0017 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Time 86400 sec
$ 1910/MT
- Density: 1.56 g/cc
- Density: 1.56 g/cc
- Linear Mold Shrinkage, Flow: 0.0029 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0036 cm/cm
- Melt Index of Compound: 30 g/10 min @Load 10.0 kg, Temperature 345 °C
$ 1830/MT
- Specific Gravity: 1.43 g/cc
- Melt Flow: 13.2 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 92.0 MPa
- Elongation at Break: 6.0 %
- Tensile Modulus: 4.27 GPa
$ 1496/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2224/MT
- Specific Gravity: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 24 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 96.0 MPa
- Elongation at Break: 70 %
$ 1865/MT
- Density: 1.42 g/cc
- Moisture Absorption: 0.550 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Melt Index of Compound: 10 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 2541/MT
- Density: 1.40 g/cc
- Tensile Strength at Break: 219 MPa
- Elongation at Break: 1.3 %
- Tensile Modulus: 19.5 GPa
- Flexural Yield Strength: 278 MPa
$ 1780/MT
- Density: 1.40 g/cc
- Tensile Strength at Break: 219 MPa
- Elongation at Break: 1.3 %
- Tensile Modulus: 19.5 GPa
- Flexural Yield Strength: 278 MPa
$ 1519/MT
- Density: 1.40 g/cc
- Tensile Strength at Break: 219 MPa
- Elongation at Break: 1.3 %
- Tensile Modulus: 19.5 GPa
- Flexural Yield Strength: 278 MPa
$ 1804/MT
- Density: 1.62 g/cc
- Density: 1.62 g/cc
- Moisture Absorption: 0.150 %
- Moisture Absorption: 0.220 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1509/MT
- Specific Gravity: 1.38 g/cc
- Melt Flow: 6.8 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 124 MPa
- Elongation at Break: 4.0 %
- Tensile Modulus: 5.03 GPa
$ 1736/MT
- Specific Gravity: 1.40 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 15 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 107 MPa
$ 1777/MT
- Specific Gravity: 1.40 g/cc
- Density: 1.39 g/cc
- Moisture Absorption: 0.170 %
- Moisture Absorption: 0.250 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1642/MT
- Density: 1.27 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Time 86400 sec
- Tensile Strength at Break: 95.0 MPa
- Tensile Strength, Yield: 106 MPa
$ 1966/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.65 %
- Water Absorption at Saturation: 1.2 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1444/MT
- Specific Gravity: 1.45 g/cc
- Density: 1.45 g/cc
- Moisture Absorption at Equilibrium: 0.12 %
- Water Absorption at Saturation: 0.35 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
$ 1661/MT
- Specific Gravity: 1.41 g/cc
- Melt Flow: 10.4 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 115 MPa
- Tensile Strength, Yield: 114 MPa
- Elongation at Break: 6.0 %
$ 1754/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.36 g/cc
- Moisture Absorption: 0.650 %
- Water Absorption at Saturation: 1.2 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1547/MT
- Specific Gravity: 1.33 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 9.5 g/10 min @Load 6.60 kg, Temperature 337 °C
- Hardness, Rockwell M: 110
- Tensile Strength, Yield: 103 MPa
$ 1545/MT
- Specific Gravity: 1.48 g/cc
- Density: 1.48 g/cc
- Moisture Absorption at Equilibrium: 0.50 %
- Water Absorption at Saturation: 0.90 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
$ 2066/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Moisture Absorption at Equilibrium: 1.25 %
- Water Absorption at Saturation: 1.25 %
$ 1914/MT
- Density: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1756/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.70 %
- Water Absorption at Saturation: 1.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1599/MT
- Specific Gravity: 1.30 g/cc
- Halogen Content: 0.00 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 1.4 g/10 min @Load 6.60 kg, Temperature 295 °C
$ 1694/MT
- Specific Gravity: 1.34 g/cc
- Water Absorption: 0.21 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 1.2 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 7.0 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 2279/MT
- Density: 1.52 g/cc
- Density: 1.52 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0023 cm/cm @Time 86400 sec
$ 1581/MT
- Specific Gravity: 1.61 g/cc
- Water Absorption: 0.13 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.90 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.2 g/10 min @Load 6.60 kg, Temperature 337 °C
$ 1705/MT
- Density: 0.0600 g/cc
- Water Absorption: 4.0 %
- Tensile Strength: 1.70 MPa
- Tensile Modulus: 0.0370 GPa
- Compressive Strength: 0.700 MPa
$ 1757/MT
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 5.00 kg, Temperature 340 °C
$ 1682/MT
- Specific Gravity: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 16 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength, Yield: 110 MPa
- Elongation at Break: 70 %
$ 1937/MT
- Specific Gravity: 1.42 g/cc
- Melt Flow: 3.1 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 131 MPa
- Elongation at Break: 5.0 %
- Tensile Modulus: 6.89 GPa
$ 1635/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption at Equilibrium: 0.080 %
- Water Absorption at Saturation: 0.36 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1486/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.65 %
- Water Absorption at Saturation: 1.75 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1502/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.600 %
- Water Absorption at Saturation: 1.75 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1715/MT
- Specific Gravity: 1.44 g/cc
- Density: 1.44 g/cc
- Water Absorption: 0.20 % @Temperature 23.0 °C, Time 86400 sec
- Moisture Absorption at Equilibrium: 0.070 %
- Linear Mold Shrinkage, Flow: 0.0046 cm/cm
$ 1639/MT
- Specific Gravity: 1.61 g/cc
- Density: 1.56 g/cc
- Water Absorption: 0.13 % @Time 86400 sec
- Moisture Absorption: 0.400 %
- Moisture Absorption at Equilibrium: 0.90 %
$ 1552/MT
- Density: 1.50 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Tensile Strength, Yield: 169 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 10.3 GPa
$ 2196/MT
- Specific Gravity: 1.60 g/cc
- Density: 1.60 g/cc
- Moisture Absorption: 0.120 %
- Moisture Absorption: 0.170 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
$ 2269/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1559/MT
- Specific Gravity: 1.45 g/cc
- Melt Flow: 5.5 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 144 MPa
- Tensile Strength, Yield: 137 MPa
- Elongation at Break: 3.0 %
$ 1881/MT
- Specific Gravity: 1.27 g/cc
- Halogen Content: 0.00 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 1.6 g/10 min @Load 6.60 kg, Temperature 295 °C
$ 1633/MT
- Density: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1563/MT
- Density: 1.43 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 2279/MT
- Specific Gravity: 1.25 g/cc
- Density: 1.25 g/cc
- Moisture Absorption at Equilibrium: 0.50 %
- Water Absorption at Saturation: 0.90 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
$ 1513/MT
- Density: 1.27 g/cc
- Moisture Absorption: 0.700 %
- Water Absorption at Saturation: 1.25 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 5.00 kg, Temperature 340 °C
$ 1731/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption at Equilibrium: 0.080 %
- Water Absorption at Saturation: 0.36 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1823/MT
- Specific Gravity: 1.26 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.50 %
- Water Absorption at Saturation: 0.90 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1859/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Moisture Absorption: 0.700 %
- Moisture Absorption at Equilibrium: 1.25 %
$ 1543/MT
- Specific Gravity: 1.51 g/cc
- Melt Flow: 7.6 g/10 min @Load 6.60 kg, Temperature 337 °C
- Tensile Strength at Break: 158 MPa
- Tensile Strength, Yield: 168 MPa
- Elongation at Break: 2.0 %
$ 1905/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 10 g/10 min @Load 6.60 kg, Temperature 337 °C
- Melt Index of Compound: 14 g/10 min @Load 5.00 kg, Temperature 360 °C
$ 1554/MT
- Density: 1.37 g/cc
- Moisture Absorption at Equilibrium: 0.65 %
- Water Absorption at Saturation: 1.2 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Melt Flow: 12 g/10 min @Load 5.00 kg, Temperature 340 °C
Delivery Polyetherimide (PEI) SABIC Innovative Plastics (GE Plastics)
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):| Country | 20’ Container | 40’ Container | 5,000 MT |
|---|---|---|---|
| 🇦🇺 Australia | $3345 | $4181 | $401400 |
| 🇦🇹 Austria | $2825 | $3531 | $339000 |
| 🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
| 🇦🇱 Albania | $2500 | $3125 | $300000 |
| 🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
| 🇦🇴 Angola | $2762.5 | $3453 | $331500 |
| 🇦🇷 Argentina | $3230 | $4038 | $387600 |
| 🇦🇲 Armenia | $2625 | $3281 | $315000 |
| 🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
| 🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
| 🇧🇭 Bahrain | $3095 | $3869 | $371400 |
| 🇧🇾 Belarus | $2825 | $3531 | $339000 |
| 🇧🇿 Belize | $3155 | $3944 | $378600 |
| 🇧🇪 Belgium | $2575 | $3219 | $309000 |
| 🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
| 🇧🇴 Bolivia | $3230 | $4038 | $387600 |
| 🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
| 🇧🇷 Brazil | $3120 | $3900 | $374400 |
| 🇭🇺 Hungary | $2575 | $3219 | $309000 |
| 🇻🇪 Venezuela | $3230 | $4038 | $387600 |
| 🇻🇳 Vietnam | $2625 | $3281 | $315000 |
| 🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
| 🇬🇹 Guatemala | $3230 | $4038 | $387600 |
| 🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
| 🇩🇪 Germany | $2475 | $3094 | $297000 |
| 🇭🇳 Honduras | $3230 | $4038 | $387600 |
| 🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
| 🇬🇷 Greece | $2575 | $3219 | $309000 |
| 🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
| 🇩🇰 Denmark | $2400 | $3000 | $288000 |
| 🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
| 🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
| 🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
| 🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
| 🇮🇱 Israel | $2625 | $3281 | $315000 |
| 🇮🇳 India | $3712.5 | $4641 | $445500 |
| 🇮🇩 Indonesia | $3095 | $3869 | $371400 |
| 🇯🇴 Jordan | $2625 | $3281 | $315000 |
| 🇮🇶 Iraq | $2625 | $3281 | $315000 |
| 🇮🇷 Iran | $3095 | $3869 | $371400 |
| 🇮🇪 Ireland | $2500 | $3125 | $300000 |
| 🇮🇸 Iceland | $2575 | $3219 | $309000 |
| 🇪🇸 Spain | $2500 | $3125 | $300000 |
| 🇮🇹 Italy | $2400 | $3000 | $288000 |
| 🇾🇪 Yemen | $2625 | $3281 | $315000 |
| 🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
| 🇰🇭 Cambodia | $3095 | $3869 | $371400 |
| 🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
| 🇨🇦 Canada | $3230 | $4038 | $387600 |
| 🇶🇦 Qatar | $2625 | $3281 | $315000 |
| 🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
| 🇨🇾 Cyprus | $2625 | $3281 | $315000 |
| 🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
| 🇨🇳 China | $3712.5 | $4641 | $445500 |
| 🇨🇴 Colombia | $3230 | $4038 | $387600 |
| 🇰🇷 Korea South | $2625 | $3281 | $315000 |
| 🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
| 🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
| 🇨🇺 Cuba | $3230 | $4038 | $387600 |
| 🇰🇼 Kuwait | $2625 | $3281 | $315000 |
| 🇱🇻 Latvia | $2575 | $3219 | $309000 |
| 🇱🇧 Lebanon | $2625 | $3281 | $315000 |
| 🇱🇾 Libya | $2762.5 | $3453 | $331500 |
| 🇱🇹 Lithuania | $2500 | $3125 | $300000 |
| 🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
| 🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
| 🇲🇾 Malaysia | $2625 | $3281 | $315000 |
| 🇲🇹 Malta | $2500 | $3125 | $300000 |
| 🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
| 🇲🇽 Mexico | $3155 | $3944 | $378600 |
| 🇲🇩 Moldova | $2400 | $3000 | $288000 |
| 🇲🇨 Monaco | $2475 | $3094 | $297000 |
| 🇲🇳 Mongolia | $2625 | $3281 | $315000 |
| 🇲🇲 Myanmar | $2625 | $3281 | $315000 |
| 🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
| 🇳🇵 Nepal | $2625 | $3281 | $315000 |
| 🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
| 🇳🇱 Netherlands | $2575 | $3219 | $309000 |
| 🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
| 🇳🇿 New Zealand | $3345 | $4181 | $401400 |
| 🇳🇴 Norway | $2400 | $3000 | $288000 |
| 🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
| 🇴🇲 Oman | $2625 | $3281 | $315000 |
| 🇵🇰 Pakistan | $2625 | $3281 | $315000 |
| 🇵🇦 Panama | $3230 | $4038 | $387600 |
| 🇵🇾 Paraguay | $3155 | $3944 | $378600 |
| 🇵🇪 Peru | $3230 | $4038 | $387600 |
| 🇵🇱 Poland | $2575 | $3219 | $309000 |
| 🇵🇹 Portugal | $2500 | $3125 | $300000 |
| 🇷🇺 Russia | $2575 | $3219 | $309000 |
| 🇷🇴 Romania | $2475 | $3094 | $297000 |
| 🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
| 🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
| 🇷🇸 Serbia | $2575 | $3219 | $309000 |
| 🇸🇬 Singapore | $3095 | $3869 | $371400 |
| 🇸🇾 Syria | $3095 | $3869 | $371400 |
| 🇸🇰 Slovakia | $2500 | $3125 | $300000 |
| 🇸🇮 Slovenia | $2500 | $3125 | $300000 |
| 🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
| 🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
| 🇺🇸 United States | $2902.5 | $3628 | $348300 |
| 🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
| 🇹🇭 Thailand | $2625 | $3281 | $315000 |
| 🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
| 🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
| 🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
| 🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
| 🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
| 🇹🇷 Turkey | $2625 | $3281 | $315000 |
| 🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
| 🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
| 🇺🇦 Ukraine | $2500 | $3125 | $300000 |
| 🇺🇾 Uruguay | $2675 | $3344 | $321000 |
| 🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
| 🇵🇭 Philippines | $2625 | $3281 | $315000 |
| 🇫🇮 Finland | $2500 | $3125 | $300000 |
| 🇫🇷 France | $2575 | $3219 | $309000 |
| 🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
| 🇲🇪 Montenegro | $2575 | $3219 | $309000 |
| 🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
| 🇨🇱 Chile | $3355 | $4194 | $402600 |
| 🇨🇭 Switzerland | $2575 | $3219 | $309000 |
| 🇸🇪 Sweden | $2500 | $3125 | $300000 |
| 🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
| 🇪🇨 Ecuador | $3155 | $3944 | $378600 |
| 🇦🇸 American Samoa | $3345 | $4181 | $401400 |
| 🇸🇻 El Salvador | $3230 | $4038 | $387600 |
| 🇪🇪 Estonia | $2575 | $3219 | $309000 |
| 🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
| 🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
| 🇯🇵 Japan | $3095 | $3869 | $371400 |
| 🇦🇩 Andorra | $2500 | $3125 | $300000 |
| 🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
| 🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
| 🇧🇧 Barbados | $3230 | $4038 | $387600 |
| 🇧🇹 Bhutan | $3095 | $3869 | $371400 |
| 🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
| 🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
| 🇧🇳 Brunei | $2625 | $3281 | $315000 |
| 🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
| 🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
| 🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
| 🇹🇩 Chad | $2762.5 | $3453 | $331500 |
| 🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
| 🇧🇯 Benin | $2762.5 | $3453 | $331500 |
| 🇩🇲 Dominica | $3230 | $4038 | $387600 |
| 🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
| 🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
| 🇫🇯 Fiji | $3345 | $4181 | $401400 |
| 🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
| 🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
| 🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
| 🇰🇮 Kiribati | $3345 | $4181 | $401400 |
| 🇬🇩 Grenada | $3355 | $4194 | $402600 |
| 🇬🇺 Guam | $3345 | $4181 | $401400 |
| 🇬🇾 Guyana | $3230 | $4038 | $387600 |
| 🇭🇹 Haiti | $3120 | $3900 | $374400 |
| 🇯🇲 Jamaica | $3230 | $4038 | $387600 |
| 🇰🇵 Korea, North | $2625 | $3281 | $315000 |
| 🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
| 🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
| 🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
| 🇲🇻 Maldives | $2625 | $3281 | $315000 |
| 🇲🇱 Mali | $2762.5 | $3453 | $331500 |
| 🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
| 🇨🇼 Curaçao | $3230 | $4038 | $387600 |
| 🇦🇼 Aruba | $3120 | $3900 | $374400 |
| 🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
| 🇳🇪 Niger | $2762.5 | $3453 | $331500 |
| 🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
| 🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
| 🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
| 🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
| 🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
| 🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
| 🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
| 🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
| 🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
| 🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
| 🇸🇲 San Marino | $2500 | $3125 | $300000 |
| 🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
| 🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
| 🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
| 🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
| 🇸🇷 Suriname | $3230 | $4038 | $387600 |
| 🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
| 🇹🇬 Togo | $2762.5 | $3453 | $331500 |
| 🇹🇴 Tonga | $3345 | $4181 | $401400 |
| 🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
| 🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
| 🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, vessels for sale greece. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.
