$ 2081/MT
- Density: 1.49 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Tensile Strength at Break: 101 MPa
- Tensile Strength, Yield: 82.0 MPa
- Elongation at Break: 3.6 %
$ 1572/MT
- Specific Gravity: 1.56 g/cc
- Density: 1.56 g/cc
- Moisture Absorption: 0.0900 %
- Water Absorption at Saturation: 0.23 %
- Linear Mold Shrinkage, Flow: 0.0028 cm/cm @Thickness 3.20 mm
$ 1646/MT
- Specific Gravity: 1.43 g/cc
- Density: 1.43 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.26 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.010 cm/cm @Thickness 3.20 mm
$ 1447/MT
- Density: 1.30 g/cc
- Water Absorption: 0.090 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.013 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm @Time 86400 sec
- Tensile Strength, Yield: 45.0 MPa
$ 1464/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.53 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.26 %
$ 1837/MT
- Specific Gravity: 1.24 g/cc
- Density: 1.24 g/cc
- Moisture Absorption at Equilibrium: 0.080 %
- Water Absorption at Saturation: 0.13 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0165 - 0.018 cm/cm @Thickness 3.20 mm
$ 2108/MT
- Density: 1.55 g/cc
- Density: 1.559 g/cc
- Moisture Absorption: 0.0500 %
- Moisture Absorption: 0.0700 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
$ 2344/MT
- Specific Gravity: 1.44 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 92.0 MPa
- Elongation at Break: 3.0 %
$ 1957/MT
- Density: 1.57 g/cc
- Density: 1.579 g/cc
- Moisture Absorption: 0.400 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1558/MT
- Specific Gravity: 1.31 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Viscosity: 700000 cP
- Linear Mold Shrinkage, Flow: 0.0090 - 0.016 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.015 - 0.023 cm/cm @Thickness 2.30 - 4.60 mm
$ 2334/MT
- Specific Gravity: 1.58 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1454/MT
- Density: 1.16 g/cc
- Moisture Absorption: 0.700 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Melt Flow: 19 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1798/MT
- Specific Gravity: 1.33 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0070 - 0.012 cm/cm @Thickness 3.20 mm
- Melt Flow: 39 g/10 min @Load 5.00 kg, Temperature 280 °C
- Tensile Strength at Break: 179 MPa
$ 1717/MT
- Specific Gravity: 1.31 g/cc
- Viscosity: 400000 cP
- Linear Mold Shrinkage, Flow: 0.019 - 0.021 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.020 - 0.022 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 54.0 MPa
$ 1817/MT
- Specific Gravity: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0090 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0070 - 0.011 cm/cm @Thickness 3.20 mm
- Melt Flow: 47 g/10 min @Load 5.00 kg, Temperature 266 °C
- Tensile Strength at Break: 152 MPa
$ 2014/MT
- Density: 1.58 g/cc
- Density: 1.58 g/cc
- Moisture Absorption: 0.0500 %
- Moisture Absorption: 0.0700 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
$ 1906/MT
- Specific Gravity: 1.65 g/cc
- Density: 1.65 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.19 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1444/MT
- Specific Gravity: 1.50 g/cc
- Density: 1.50 g/cc
- Filler Content: 15 %
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.45 %
$ 2052/MT
- Specific Gravity: 1.66 g/cc
- Density: 1.65 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.070 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1652/MT
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0070 - 0.011 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 - 0.011 cm/cm
$ 2125/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 265 °C
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 265 °C
$ 1996/MT
- Specific Gravity: 1.63 g/cc
- Density: 1.63 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.090 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0050 cm/cm
$ 1655/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.010 - 0.030 cm/cm @Time 86400 sec
- Tensile Strength at Break: 58.0 MPa
$ 1647/MT
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.45 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.010 - 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 - 0.018 cm/cm
$ 1733/MT
- Specific Gravity: 1.21 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 3.20 mm
$ 2066/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0080 - 0.011 cm/cm @Thickness 0.750 - 2.30 mm
$ 1524/MT
- Density: 1.43 g/cc
- Density: 1.43 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0023 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm @Time 86400 sec
$ 1577/MT
- Density: 1.43 g/cc
- Density: 1.43 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0023 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm @Time 86400 sec
$ 2183/MT
- Density: 1.43 g/cc
- Density: 1.43 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0023 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm @Time 86400 sec
$ 1671/MT
- Density: 1.31 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.34 %
- Linear Mold Shrinkage, Flow: 0.011 - 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 - 0.018 cm/cm
$ 1503/MT
- Density: 1.37 g/cc
- Density: 1.38 g/cc
- Moisture Absorption at Equilibrium: 0.080 %
- Moisture Absorption at Equilibrium: 0.050 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1521/MT
- Density: 1.47 g/cc
- Density: 1.474 g/cc
- Linear Mold Shrinkage, Flow: 0.0029 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0129 cm/cm @Time 86400 sec
$ 2262/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.080 %
- Water Absorption at Saturation: 0.28 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0065 - 0.0073 cm/cm @Thickness 3.20 mm
$ 2379/MT
- Specific Gravity: 1.32 g/cc
- Density: 1.32 g/cc
- Moisture Absorption: 0.0700 %
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec
$ 1819/MT
- Density: 1.37 g/cc
- Density: 1.374 g/cc
- Moisture Absorption: 0.0800 %
- Moisture Absorption: 0.0900 %
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Time 86400 sec
$ 1988/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.14 %
- Water Absorption at Saturation: 0.16 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1539/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.16 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.37 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 2162/MT
- Specific Gravity: 1.66 g/cc
- Water Absorption: 0.030 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1478/MT
- Density: 1.54 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Moisture Absorption at Equilibrium: 0.050 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.010 - 0.040 cm/cm @Time 86400 sec
$ 1583/MT
- Specific Gravity: 1.54 g/cc
- Density: 1.54 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.090 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1796/MT
- Specific Gravity: 1.54 g/cc
- Density: 1.54 g/cc
- Moisture Absorption: 0.0600 %
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.15 %
$ 1761/MT
- Density: 1.30 g/cc
- Water Absorption: 0.54 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Tensile Strength at Break: 42.0 MPa
- Tensile Strength, Yield: 43.0 MPa
$ 1444/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.34 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
$ 1677/MT
- Specific Gravity: 1.60 g/cc
- Density: 1.54 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.16 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm
$ 1594/MT
- Melt Flow: 9.0 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 40.0 MPa
- Elongation at Break: 60 %
- Tensile Modulus: 2.25 GPa
- Izod Impact, Unnotched (ISO): 32.0 kJ/m² @Temperature 23.0 °C
- Vicat Softening Point: 115 °C
$ 1713/MT
- Density: 1.43 g/cc
- Density: 1.43 g/cc
- Moisture Absorption: 0.0500 %
- Moisture Absorption: 0.0800 %
- Linear Mold Shrinkage, Flow: 0.021 - 0.024 cm/cm @Time 86400 sec
$ 2045/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 265 °C
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 265 °C
$ 1734/MT
- Density: 1.50 g/cc
- Filler Content: 15 %
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.17 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm
$ 1852/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.080 %
- Water Absorption at Saturation: 0.28 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0065 - 0.0073 cm/cm @Thickness 3.20 mm
$ 1524/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0015 cm/cm
- Tensile Strength at Break: 101 MPa
- Elongation at Break: 4.0 %
- Flexural Strength: 152 MPa
$ 1785/MT
- Specific Gravity: 1.64 g/cc
- Density: 1.64 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.19 %
- Linear Mold Shrinkage, Flow: 0.0018 - 0.0021 cm/cm @Thickness 3.20 mm
$ 1586/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.0100 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0285 - 0.0335 cm/cm @Thickness 3.20 mm
$ 1496/MT
- Density: 1.16 g/cc
- Moisture Absorption: 0.700 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 260 °C
$ 1637/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.17 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.050 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1516/MT
- Specific Gravity: 1.45 g/cc
- Density: 1.45 g/cc
- Filler Content: 15 %
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.15 %
$ 1471/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.012 cm/cm @Thickness 3.20 mm
$ 2013/MT
- Density: 1.27 g/cc
- Density: 1.27 g/cc
- Water Absorption: 0.20 % @Time 173000 sec
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.015 - 0.017 cm/cm @Time 86400 sec
$ 1680/MT
- Specific Gravity: 1.50 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0070 cm/cm @Thickness 6.40 mm
- Tensile Strength, Yield: 166 MPa
$ 1553/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.010 cm/cm @Thickness 3.20 mm
$ 1455/MT
- Specific Gravity: 1.44 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0070 - 0.0090 cm/cm @Thickness 1.50 - 3.20 mm
$ 1855/MT
- Density: 1.38 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm
- Tensile Strength, Yield: 80.0 MPa
- Elongation at Yield: 3.3 %
- Tensile Modulus: 4.70 GPa
$ 1598/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.012 cm/cm @Thickness 3.20 mm
$ 2246/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 265 °C
$ 1825/MT
- Specific Gravity: 1.54 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1671/MT
- Specific Gravity: 1.50 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 6.40 mm
- Hardness, Rockwell R: 118
$ 1741/MT
- Specific Gravity: 1.46 g/cc
- Density: 1.46 g/cc
- Filler Content: 15 %
- Viscosity: 145000 cP
- Melt Flow: 15 g/10 min @Load 5.00 kg, Temperature 250 °C
$ 2363/MT
- Specific Gravity: 1.65 g/cc
- Density: 1.65 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.19 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1759/MT
- Density: 1.46 g/cc
- Linear Mold Shrinkage, Flow: 0.00060 cm/cm
- Tensile Strength at Break: 116 MPa
- Elongation at Break: 1.1 %
- Elongation at Break: 2.1 %
$ 1527/MT
- Specific Gravity: 1.32 g/cc
- Density: 1.32 g/cc
- Moisture Absorption: 0.340 %
- Water Absorption at Saturation: 0.080 %
- Linear Mold Shrinkage, Flow: 0.021 - 0.024 cm/cm @Thickness 3.20 mm
$ 1609/MT
- Specific Gravity: 1.54 g/cc
- Density: 1.54 g/cc
- Filler Content: 20 %
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.26 %
$ 2058/MT
- Specific Gravity: 1.34 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0080 - 0.011 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.010 - 0.014 cm/cm @Thickness 2.30 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0090 - 0.013 cm/cm @Thickness 0.750 - 2.30 mm
$ 1702/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1647/MT
- Density: 1.76 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.16 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0020 - 0.0060 cm/cm
$ 1469/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 265 °C
$ 1488/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.030 cm/cm @Time 86400 sec
- Tensile Strength at Break: 44.0 MPa
- Elongation at Break: 30.6 %
- Tensile Modulus: 2.40 GPa
$ 2248/MT
- Specific Gravity: 1.73 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 45 g/10 min @Load 5.00 kg, Temperature 266 °C
- Tensile Strength at Break: 110 MPa
$ 1685/MT
- Density: 1.51 g/cc
- Density: 1.514 g/cc
- Moisture Absorption at Equilibrium: 0.080 %
- Linear Mold Shrinkage, Flow: 0.0129 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.013 cm/cm @Time 86400 sec
$ 1551/MT
- Specific Gravity: 1.41 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0090 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0080 cm/cm @Thickness 1.50 - 3.20 mm
$ 1480/MT
- Specific Gravity: 1.24 g/cc
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.1 g/10 min @Load 5.00 kg, Temperature 250 °C
$ 1702/MT
- Specific Gravity: 1.44 g/cc
- Density: 1.44 g/cc
- Filler Content: 20 %
- Moisture Absorption: 0.0300 %
- Water Absorption at Saturation: 0.15 %
$ 1572/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0090 - 0.012 cm/cm
$ 1687/MT
- Specific Gravity: 1.46 g/cc
- Density: 1.46 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.26 %
- Viscosity: 110000 cP
$ 1543/MT
- Density: 1.48 g/cc
- Density: 1.48 g/cc
- Moisture Absorption: 2.50 %
- Linear Mold Shrinkage, Flow: 0.0039 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
$ 1725/MT
- Specific Gravity: 1.51 g/cc
- Density: 1.51 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0040 cm/cm @Thickness 3.20 mm
$ 1447/MT
- Density: 1.35 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Tensile Strength at Break: 127 MPa
- Elongation at Break: 2.1 %
- Tensile Modulus: 10.8 GPa
$ 1643/MT
- Density: 1.36 g/cc
- Tensile Strength at Break: 124 MPa
- Elongation at Break: 2.0 %
- Flexural Strength: 163 MPa
- Flexural Modulus: 8.20 GPa
$ 1729/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.34 %
- Linear Mold Shrinkage, Flow: 0.029 - 0.034 cm/cm @Thickness 3.20 mm
$ 2086/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.080 %
- Viscosity: 295000 cP
$ 1640/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.080 %
- Viscosity: 295000 cP
$ 1488/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.28 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1498/MT
- Specific Gravity: 1.43 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 6.40 mm
- Tensile Strength, Yield: 98.0 MPa
$ 2011/MT
- Specific Gravity: 1.54 g/cc
- Density: 1.54 g/cc
- Filler Content: 20 %
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.27 %
$ 2202/MT
- Density: 1.56 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.27 %
- Melt Index of Compound: 14 g/10 min @Load 2.16 kg, Temperature 265 °C
- Tensile Strength at Break: 155 MPa
$ 2151/MT
- Specific Gravity: 1.40 g/cc
- Density: 1.40 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.36 %
- Linear Mold Shrinkage, Flow: 0.011 - 0.018 cm/cm
$ 1493/MT
- Density: 1.27 g/cc
- Density: 1.27 g/cc
- Water Absorption: 0.20 % @Time 173000 sec
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.015 - 0.017 cm/cm @Time 86400 sec
$ 1594/MT
- Density: 1.49 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Time 86400 sec
- Tensile Strength at Break: 103 MPa
- Tensile Strength at Break: 103 MPa
- Elongation at Break: 2.9 %
$ 2488/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Tensile Strength at Break: 136 MPa
- Elongation at Break: 1.9 %
- Tensile Modulus: 11.4 GPa
$ 1446/MT
- Specific Gravity: 1.70 g/cc
- Density: 1.70 g/cc
- Filler Content: 35 %
- Moisture Absorption: 0.0900 %
- Water Absorption at Saturation: 0.94 %
$ 1613/MT
- Density: 1.23 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0080 - 0.011 cm/cm
- Melt Flow: 14 g/10 min @Load 2.16 kg, Temperature 250 °C
$ 1489/MT
- Specific Gravity: 1.45 g/cc
- Density: 1.45 g/cc
- Filler Content: 20 %
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.28 %
$ 1883/MT
- Specific Gravity: 1.16 g/cc
- Density: 1.17 g/cc
- Moisture Absorption at Equilibrium: 1.1 %
- Water Absorption at Saturation: 3.8 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.010 - 0.012 cm/cm
$ 2448/MT
- Specific Gravity: 1.45 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0070 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 94.0 MPa
- Elongation at Break: 8.0 %
$ 2086/MT
- Specific Gravity: 1.49 g/cc
- Linear Mold Shrinkage, Flow: 0.014 - 0.016 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.015 - 0.016 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.013 - 0.014 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.014 - 0.015 cm/cm @Thickness 3.20 - 4.60 mm
$ 1668/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.17 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 2199/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.34 %
- Linear Mold Shrinkage, Flow: 0.015 - 0.020 cm/cm @Thickness 3.20 mm
$ 2422/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.53 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.28 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 2055/MT
- Density: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.110 %
- Moisture Absorption: 0.160 %
- Linear Mold Shrinkage, Flow: 0.0051 cm/cm
$ 1678/MT
- Density: 1.30 g/cc
- Linear Mold Shrinkage, Flow: 0.0080 - 0.011 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0080 - 0.011 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 41.0 MPa
- Tensile Strength, Yield: 52.0 MPa
$ 1960/MT
- Specific Gravity: 1.25 g/cc
- Density: 1.25 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 1.1 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0080 - 0.012 cm/cm
$ 1585/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1627/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.080 %
- Linear Mold Shrinkage, Flow: 0.011 - 0.014 cm/cm @Thickness 3.20 mm
$ 1489/MT
- Density: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.370 %
- Moisture Absorption: 0.500 %
- Linear Mold Shrinkage, Flow: 0.021 cm/cm @Time 86400 sec
$ 1535/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1568/MT
- Density: 1.38 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0080 cm/cm
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 250 °C
- Hardness, H358/30: 95.0 MPa
- Tensile Strength at Break: 90.0 MPa
$ 1888/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.0100 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0285 - 0.0335 cm/cm @Thickness 3.20 mm
$ 1559/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Filler Content: 10 %
- Viscosity: 160000 cP
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1603/MT
- Specific Gravity: 1.22 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0090 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 63.0 MPa
- Elongation at Break: 220 %
$ 1767/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.11 %
- Linear Mold Shrinkage, Flow: 0.021 - 0.027 cm/cm @Thickness 3.20 mm
$ 1940/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.010 cm/cm @Thickness 3.20 mm
$ 1642/MT
- Density: 1.45 g/cc
- Moisture Absorption at Equilibrium: 0.080 %
- Water Absorption at Saturation: 0.35 % @Temperature 23.0 °C
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 40.0 MPa
$ 1821/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.53 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.28 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 2329/MT
- Specific Gravity: 1.23 g/cc
- Density: 1.23 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1905/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 21 g/10 min @Load 2.16 kg, Temperature 265 °C
- Melt Flow: 21 g/10 min @Load 2.16 kg, Temperature 265 °C
$ 1508/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
$ 1829/MT
- Density: 1.30 g/cc
- Linear Mold Shrinkage, Flow: 0.016 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.020 cm/cm @Time 86400 sec
- Tensile Strength at Break: 36.0 MPa
- Tensile Modulus: 1.10 GPa
$ 1769/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.070 %
- Water Absorption at Saturation: 0.28 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
$ 2340/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.28 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1487/MT
- Density: 1.23 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0090 - 0.012 cm/cm
- Melt Flow: 14 g/10 min @Load 5.00 kg, Temperature 250 °C
$ 1799/MT
- Specific Gravity: 1.32 g/cc
- Linear Mold Shrinkage, Flow: 0.015 - 0.018 cm/cm @Thickness 3.20 mm
- Melt Flow: 30 g/10 min @Load 1.20 kg, Temperature 250 °C
- Tensile Strength at Break: 46.0 MPa
- Tensile Strength, Yield: 46.0 MPa
$ 2062/MT
- Specific Gravity: 1.31 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.34 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0090 - 0.016 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.015 - 0.023 cm/cm @Thickness 2.30 - 4.60 mm
$ 1783/MT
- Density: 1.43 g/cc
- Density: 1.43 g/cc
- Melt Index of Compound: 16 g/10 min @Load 2.16 kg, Temperature 265 °C
- Melt Index of Compound: 42 g/10 min @Load 5.00 kg, Temperature 265 °C
- Tensile Strength at Break: 92.0 MPa
$ 1622/MT
- Specific Gravity: 1.08 g/cc
- Density: 1.08 g/cc
- Moisture Absorption at Equilibrium: 1.2 %
- Water Absorption at Saturation: 4.2 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.012 - 0.016 cm/cm @Thickness 3.20 mm
$ 2091/MT
- Specific Gravity: 1.33 g/cc
- Water Absorption: 0.14 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.60 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.011 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.010 - 0.014 cm/cm @Thickness 2.30 - 4.60 mm
$ 1472/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 21 g/10 min @Load 2.16 kg, Temperature 265 °C
- Melt Flow: 21 g/10 min @Load 2.16 kg, Temperature 265 °C
$ 2428/MT
- Specific Gravity: 1.40 g/cc
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength, Yield: 57.0 MPa
- Elongation at Break: 16 %
- Flexural Yield Strength: 90.0 MPa
$ 1545/MT
- Specific Gravity: 1.20 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.016 - 0.018 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.016 - 0.018 cm/cm @Thickness 3.20 mm
- Hardness, Rockwell R: 108
$ 2487/MT
- Density: 1.81 g/cc
- Linear Mold Shrinkage, Flow: 0.012 - 0.019 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 21 g/10 min @Load 1.20 kg, Temperature 265 °C
- Hardness, H358/30: 140 MPa
- Tensile Strength at Break: 60.0 MPa
$ 1842/MT
- Specific Gravity: 1.43 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0090 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0080 cm/cm @Thickness 1.50 - 3.20 mm
$ 2075/MT
- Density: 4.20 g/cc
- Density: 4.20 g/cc
- Moisture Absorption: 0.0500 %
- Moisture Absorption: 0.0700 %
- Linear Mold Shrinkage, Flow: 0.016 - 0.018 cm/cm @Time 86400 sec
$ 2108/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1572/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 26 g/10 min @Load 5.00 kg, Temperature 266 °C
- Tensile Strength at Break: 42.0 MPa
- Tensile Strength, Yield: 63.0 MPa
$ 2193/MT
- Specific Gravity: 1.58 g/cc
- Density: 1.58 g/cc
- Filler Content: 30 %
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.30 %
$ 2246/MT
- Specific Gravity: 1.80 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0080 - 0.013 cm/cm @Thickness 6.40 mm
- Tensile Strength, Yield: 132 MPa
$ 1626/MT
- Specific Gravity: 1.42 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 6.40 mm
- Hardness, Rockwell R: 118
$ 1618/MT
- Specific Gravity: 1.39 g/cc
- Density: 1.39 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0090 cm/cm
$ 1863/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.34 %
- Viscosity: 100000 cP
$ 1670/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.17 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 265 °C
$ 1995/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0090 - 0.012 cm/cm @Thickness 3.20 mm
$ 1982/MT
- Density: 1.23 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0080 - 0.011 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 - 0.011 cm/cm
$ 1586/MT
- Density: 1.50 g/cc
- Density: 1.51 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0089 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Time 86400 sec
$ 1882/MT
- Specific Gravity: 1.64 g/cc
- Density: 1.64 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.19 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2143/MT
- Specific Gravity: 1.53 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0090 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0080 cm/cm @Thickness 1.50 - 3.20 mm
$ 2131/MT
- Specific Gravity: 1.50 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 2449/MT
- Density: 1.64 g/cc
- Density: 1.64 g/cc
- Moisture Absorption: 0.0500 %
- Moisture Absorption: 0.0500 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0060 cm/cm @Time 86400 sec
$ 1530/MT
- Density: 1.21 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0070 - 0.011 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 250 °C
$ 2026/MT
- Density: 1.60 g/cc
- Density: 1.60 g/cc
- Moisture Absorption: 0.0500 %
- Moisture Absorption: 0.0700 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Time 86400 sec
$ 1510/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.80 %
- Water Absorption at Saturation: 3.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.010 - 0.013 cm/cm @Thickness 3.20 mm
$ 2159/MT
- Specific Gravity: 1.49 g/cc
- Linear Mold Shrinkage, Flow: 0.014 - 0.016 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.015 - 0.016 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.013 - 0.014 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.014 - 0.015 cm/cm @Thickness 3.20 - 4.60 mm
$ 2155/MT
- Specific Gravity: 1.51 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1838/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.35 g/cc
- Moisture Absorption at Equilibrium: 0.14 %
- Water Absorption at Saturation: 0.42 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2300/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.17 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.49 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1539/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 265 °C
$ 1786/MT
- Density: 4.50 g/cc
- Density: 4.50 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm @Time 86400 sec
- Tensile Strength at Break: 28.0 MPa
$ 1500/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.080 %
- Linear Mold Shrinkage, Flow: 0.011 - 0.014 cm/cm @Thickness 3.20 mm
$ 1927/MT
- Specific Gravity: 1.53 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0090 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0080 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0080 - 0.011 cm/cm @Thickness 3.20 - 4.60 mm
$ 1588/MT
- Density: 4.50 g/cc
- Density: 4.50 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm @Time 86400 sec
- Tensile Strength at Break: 28.0 MPa
$ 1971/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.52 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.23 %
- Viscosity: 210000 cP
$ 2165/MT
- Density: 1.60 g/cc
- Density: 1.60 g/cc
- Moisture Absorption at Equilibrium: 0.070 %
- Moisture Absorption at Equilibrium: 0.050 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Time 86400 sec
$ 1890/MT
- Density: 2.08 g/cc
- Density: 2.08 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0083 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.015 - 0.017 cm/cm @Time 86400 sec
$ 1497/MT
- Density: 1.19 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Viscosity: 200000 cP @Temperature 282 °C
- Linear Mold Shrinkage, Flow: 0.022 - 0.026 cm/cm
- Melt Flow: 25 g/10 min @Load 10.0 kg, Temperature 280 °C
$ 2138/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Filler Content: 10 %
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.15 %
$ 1513/MT
- Density: 1.66 g/cc
- Tensile Strength at Break: 128 MPa
- Elongation at Break: 2.4 %
- Tensile Modulus: 12.54 GPa
- Flexural Strength: 199 MPa
$ 1501/MT
- Density: 1.16 g/cc
- Moisture Absorption: 0.700 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Tensile Strength, Yield: 34.0 MPa
$ 1479/MT
- Specific Gravity: 1.72 g/cc
- Linear Mold Shrinkage, Flow: 0.0065 - 0.0085 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 - 0.012 cm/cm
- Tensile Strength at Break: 72.0 MPa
- Elongation at Break: 2.3 %
$ 1997/MT
- Specific Gravity: 1.31 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Viscosity: 100000 cP
- Linear Mold Shrinkage, Flow: 0.0090 - 0.016 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.015 - 0.023 cm/cm @Thickness 2.30 - 4.60 mm
$ 2059/MT
- Specific Gravity: 1.37 g/cc
- Density: 1.37 g/cc
- Moisture Absorption at Equilibrium: 1.2 %
- Water Absorption at Saturation: 4.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0023 - 0.0028 cm/cm @Thickness 3.20 mm
$ 2054/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.35 g/cc
- Filler Content: 10 %
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.20 %
$ 2380/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.34 %
- Viscosity: 400000 cP
$ 1811/MT
- Density: 4.86 g/cc
- Density: 4.87 g/cc
- Moisture Absorption: 0.0400 %
- Moisture Absorption: 0.0600 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm @Time 86400 sec
$ 1546/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.014 - 0.020 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 43.0 MPa
- Elongation at Break: 175 %
- Flexural Yield Strength: 64.0 MPa
$ 1507/MT
- Density: 1.46 g/cc
- Moisture Absorption at Equilibrium: 0.13 %
- Water Absorption at Saturation: 0.36 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0032 - 0.0040 cm/cm
- Melt Flow: 38 g/10 min @Load 5.00 kg, Temperature 265 °C
$ 2043/MT
- Specific Gravity: 1.30 g/cc
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0080 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 39.0 MPa
- Tensile Strength, Yield: 46.0 MPa
$ 1557/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.16 %
- Linear Mold Shrinkage, Flow: 0.016 - 0.024 cm/cm @Thickness 3.20 mm
$ 1793/MT
- Density: 1.42 g/cc
- Linear Mold Shrinkage, Flow: 0.014 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.020 cm/cm @Time 86400 sec
- Tensile Strength at Break: 57.0 MPa
- Elongation at Break: 2.9 %
$ 1511/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0300 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.010 cm/cm @Thickness 3.20 mm
$ 1582/MT
- Specific Gravity: 1.30 g/cc
- Linear Mold Shrinkage, Flow: 0.012 - 0.014 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.012 - 0.014 cm/cm @Thickness 3.20 mm
- Melt Flow: 19 g/10 min @Load 5.00 kg, Temperature 266 °C
- Melt Index of Compound: 17 g/10 min @Load 5.00 kg, Temperature 265 °C
$ 1544/MT
- Density: 1.50 g/cc
- Linear Mold Shrinkage, Flow: 0.023 cm/cm
- Tensile Strength, Yield: 46.0 MPa
- Elongation at Yield: 26.3 %
- Tensile Modulus: 2.00 GPa
$ 2066/MT
- Specific Gravity: 1.31 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0090 - 0.016 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.015 - 0.023 cm/cm @Thickness 2.30 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.010 - 0.017 cm/cm @Thickness 0.750 - 2.30 mm
$ 1853/MT
- Density: 1.31 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.34 %
- Linear Mold Shrinkage, Flow: 0.011 - 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 - 0.018 cm/cm
$ 1657/MT
- Density: 1.40 g/cc
- Tensile Strength at Break: 42.0 MPa
- Elongation at Break: 12 %
- Tensile Modulus: 2.40 GPa
- Flexural Yield Strength: 71.0 MPa
$ 1582/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.080 %
- Linear Mold Shrinkage, Flow: 0.011 - 0.014 cm/cm @Thickness 3.20 mm
$ 1561/MT
- Density: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 1.09 %
- Moisture Absorption at Equilibrium: 0.65 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.017 cm/cm @Time 86400 sec
$ 1589/MT
- Specific Gravity: 1.63 g/cc
- Density: 1.63 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.090 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0050 cm/cm
$ 1916/MT
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0090 cm/cm
- Melt Flow: 14 g/10 min @Load 5.00 kg, Temperature 250 °C
$ 1524/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.16 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1554/MT
- Specific Gravity: 1.43 g/cc
- Density: 1.42 g/cc
- Moisture Absorption: 0.0900 %
- Moisture Absorption: 0.0900 %
- Linear Mold Shrinkage, Flow: 0.013 cm/cm @Time 86400 sec
$ 1844/MT
- Specific Gravity: 1.66 g/cc
- Density: 1.65 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.070 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1641/MT
- Specific Gravity: 1.21 g/cc
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 58.0 MPa
- Tensile Strength, Yield: 52.0 MPa
- Elongation at Break: 120 %
$ 1462/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.53 g/cc
- Filler Content: 30 %
- Water Absorption: 0.060 % @Time 86400 sec
- Moisture Absorption: 0.0800 %
$ 2253/MT
- Specific Gravity: 1.59 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1553/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.52 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.25 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1836/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0600 %
- Moisture Absorption: 0.0900 %
- Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec
$ 1656/MT
- Specific Gravity: 1.53 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.0090 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 91.0 MPa
- Tensile Strength, Yield: 89.0 MPa
$ 2060/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.17 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.49 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 2256/MT
- Specific Gravity: 1.61 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 6.40 mm
- Hardness, Rockwell R: 119
$ 1825/MT
- Density: 5.00 g/cc
- Tensile Strength at Break: 31.0 MPa
- Elongation at Break: 5.0 %
- Flexural Strength: 62.0 MPa
- Flexural Modulus: 2.17 GPa
$ 1909/MT
- Specific Gravity: 1.21 g/cc
- Density: 1.21 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 210000 cP
$ 2226/MT
- Density: 1.39 g/cc
- Density: 1.396 g/cc
- Moisture Absorption: 0.0400 %
- Moisture Absorption: 0.0600 %
- Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec
$ 1486/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.012 cm/cm @Thickness 3.20 mm
$ 2045/MT
- Specific Gravity: 1.17 g/cc
- Density: 1.17 g/cc
- Moisture Absorption: 0.270 %
- Water Absorption at Saturation: 0.70 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 2484/MT
- Specific Gravity: 1.53 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 - 4.60 mm
$ 1445/MT
- Specific Gravity: 1.47 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 6.40 mm
- Tensile Strength, Yield: 87.0 MPa
$ 1543/MT
- Density: 1.39 g/cc
- Linear Mold Shrinkage, Flow: 0.023 cm/cm
- Tensile Strength, Yield: 42.0 MPa
- Elongation at Yield: 4.2 %
- Tensile Modulus: 1.90 GPa
$ 1461/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.012 cm/cm @Thickness 3.20 mm
$ 1446/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.230 %
- Moisture Absorption: 0.370 %
- Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec
$ 2085/MT
- Specific Gravity: 1.77 g/cc
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1647/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 265 °C
$ 1727/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 21 g/10 min @Load 2.16 kg, Temperature 265 °C
$ 1585/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1701/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.12 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1464/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1984/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1902/MT
- Specific Gravity: 1.28 g/cc
- Moisture Absorption: 0.0800 %
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.010 - 0.030 cm/cm @Time 86400 sec
$ 1658/MT
- Density: 1.65 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.25 %
- Melt Index of Compound: 7.0 g/10 min @Load 1.20 kg, Temperature 265 °C
- Tensile Strength at Break: 160 MPa
$ 1617/MT
- Density: 1.62 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm @Time 86400 sec
- Tensile Strength at Break: 119 MPa
- Elongation at Break: 2.7 %
- Tensile Modulus: 10.44 GPa
$ 1641/MT
- Specific Gravity: 1.30 g/cc
- Water Absorption: 0.14 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.010 - 0.014 cm/cm @Thickness 3.20 mm
- Melt Flow: 16 g/10 min @Load 5.00 kg, Temperature 250 °C
- Tensile Strength at Break: 50.0 MPa
$ 1832/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption at Equilibrium: 0.14 %
- Water Absorption at Saturation: 0.42 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1793/MT
- Specific Gravity: 1.29 g/cc
- Density: 1.29 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.20 %
- Linear Mold Shrinkage, Flow: 0.021 - 0.027 cm/cm @Thickness 3.20 mm
$ 1486/MT
- Density: 1.62 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm
- Tensile Strength at Break: 100 MPa
- Elongation at Break: 2.8 %
- Tensile Modulus: 8.00 GPa
$ 1841/MT
- Density: 1.44 g/cc
- Moisture Absorption: 0.0300 %
- Water Absorption at Saturation: 0.15 %
- Melt Index of Compound: 40 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 110 MPa
$ 1848/MT
- Density: 1.54 g/cc
- Moisture Absorption at Equilibrium: 0.070 %
- Water Absorption at Saturation: 0.26 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0070 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.010 cm/cm
$ 2021/MT
- Specific Gravity: 1.23 g/cc
- Density: 1.23 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1615/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.34 %
- Linear Mold Shrinkage, Flow: 0.029 - 0.034 cm/cm @Thickness 3.20 mm
$ 1813/MT
- Density: 1.43 g/cc
- Moisture Absorption at Equilibrium: 0.060 %
- Water Absorption at Saturation: 0.26 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.010 cm/cm
$ 1652/MT
- Specific Gravity: 1.52 g/cc
- Water Absorption: 0.050 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 - 4.60 mm
$ 2230/MT
- Density: 1.66 g/cc
- Moisture Absorption at Equilibrium: 0.030 %
- Water Absorption at Saturation: 0.33 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.010 cm/cm
$ 1621/MT
- Specific Gravity: 1.59 g/cc
- Density: 1.59 g/cc
- Moisture Absorption: 0.0500 %
- Moisture Absorption: 0.0700 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Time 86400 sec
$ 1806/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 61.0 MPa
- Elongation at Break: 120 %
$ 1448/MT
- Specific Gravity: 1.51 g/cc
- Density: 1.51 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0040 cm/cm @Thickness 3.20 mm
$ 1908/MT
- Specific Gravity: 1.32 g/cc
- Density: 1.32 g/cc
- Moisture Absorption: 0.340 %
- Water Absorption at Saturation: 0.080 %
- Linear Mold Shrinkage, Flow: 0.021 - 0.024 cm/cm @Thickness 3.20 mm
$ 1900/MT
- Density: 1.22 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Viscosity: 215000 cP
- Linear Mold Shrinkage, Flow: 0.0070 - 0.010 cm/cm
$ 1486/MT
- Specific Gravity: 1.54 g/cc
- Density: 1.54 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.090 %
$ 1754/MT
- Specific Gravity: 1.81 g/cc
- Density: 1.81 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.070 %
- Linear Mold Shrinkage, Flow: 0.012 - 0.019 cm/cm @Thickness 3.20 mm
$ 1600/MT
- Specific Gravity: 1.60 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0060 cm/cm @Thickness 6.40 mm
- Hardness, Rockwell R: 118
$ 1514/MT
- Density: 1.36 g/cc
- Moisture Absorption at Equilibrium: 0.070 %
- Water Absorption at Saturation: 0.31 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.0090 cm/cm
$ 1446/MT
- Specific Gravity: 1.31 g/cc
- Viscosity: 100000 cP
- Linear Mold Shrinkage, Flow: 0.019 - 0.021 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.020 - 0.022 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 58.0 MPa
$ 1542/MT
- Specific Gravity: 1.58 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0060 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 117 MPa
- Elongation at Break: 5.0 %
$ 2485/MT
- Density: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.50 %
- Moisture Absorption at Equilibrium: 0.37 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.021 cm/cm @Time 86400 sec
$ 2366/MT
- Density: 1.51 g/cc
- Density: 1.51 g/cc
- Moisture Absorption: 0.0300 %
- Moisture Absorption: 0.0500 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
$ 1680/MT
- Density: 1.22 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.011 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 - 0.011 cm/cm
$ 1756/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.34 %
- Linear Mold Shrinkage, Flow: 0.029 - 0.034 cm/cm @Thickness 3.20 mm
$ 1841/MT
- Specific Gravity: 1.67 g/cc
- Density: 1.67 g/cc
- Filler Content: 30 %
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.25 %
$ 2282/MT
- Specific Gravity: 1.29 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 84.0 MPa
- Elongation at Break: 11 %
- Flexural Strength: 127 MPa
$ 1510/MT
- Density: 1.55 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.26 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0070 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.010 cm/cm
$ 1513/MT
- Specific Gravity: 1.31 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.34 %
- Linear Mold Shrinkage, Flow: 0.0090 - 0.016 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.015 - 0.023 cm/cm @Thickness 2.30 - 4.60 mm
$ 1764/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.28 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1722/MT
- Density: 2.695 g/cc
- Moisture Absorption: 0.0800 %
- Linear Mold Shrinkage, Flow: 0.011 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm @Time 86400 sec
- Tensile Strength at Break: 30.0 MPa
$ 1647/MT
- Density: 1.30 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.0900 %
- Moisture Absorption: 0.130 %
- Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec
$ 1787/MT
- Specific Gravity: 1.62 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1510/MT
- Specific Gravity: 1.65 g/cc
- Density: 1.65 g/cc
- Filler Content: 30 %
- Moisture Absorption: 0.0300 %
- Water Absorption at Saturation: 0.32 %
$ 1603/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.52 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.25 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0090 cm/cm @Thickness 3.20 mm
$ 2064/MT
- Density: 1.55 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Tensile Strength at Break: 73.0 MPa
- Elongation at Break: 2.3 %
- Tensile Modulus: 6.40 GPa
$ 1713/MT
- Specific Gravity: 1.63 g/cc
- Water Absorption: 0.050 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0050 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1628/MT
- Specific Gravity: 1.34 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0080 - 0.011 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.010 - 0.014 cm/cm @Thickness 2.30 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0090 - 0.013 cm/cm @Thickness 0.750 - 2.30 mm
$ 1676/MT
- Density: 1.35 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Melt Index of Compound: 15 g/10 min @Load 5.00 kg, Temperature 265 °C
- Tensile Strength at Break: 50.0 MPa
$ 1471/MT
- Specific Gravity: 1.31 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0090 - 0.016 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.015 - 0.023 cm/cm @Thickness 2.30 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.010 - 0.017 cm/cm @Thickness 0.750 - 2.30 mm
$ 2037/MT
- Specific Gravity: 1.38 g/cc
- Density: 1.38 g/cc
- Filler Content: 20 %
- Moisture Absorption: 0.270 %
- Water Absorption at Saturation: 0.76 %
$ 1507/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.26 g/cc
- Moisture Absorption at Equilibrium: 0.14 %
- Water Absorption at Saturation: 0.42 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0065 - 0.0075 cm/cm @Thickness 3.20 mm
$ 1646/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.16 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.37 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 2518/MT
- Specific Gravity: 1.51 g/cc
- Density: 1.51 g/cc
- Moisture Absorption: 0.0500 %
- Moisture Absorption: 0.0600 %
- Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec
$ 2062/MT
- Density: 1.47 g/cc
- Moisture Absorption: 0.100 %
- Moisture Absorption: 0.140 %
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Time 86400 sec
- Tensile Strength at Break: 103 MPa
$ 1464/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption at Equilibrium: 0.030 %
- Water Absorption at Saturation: 0.090 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.011 cm/cm @Thickness 3.20 mm
$ 2093/MT
- Density: 1.34 g/cc
- Water Absorption: 0.48 %
- Surface Tension: 34 - 36 dynes/cm
- Surface Tension: >= 44 dynes/cm
- Tensile Strength, Ultimate: 41.4 MPa
$ 1638/MT
- Density: 1.59 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0060 cm/cm
- Tensile Strength at Break: 90.0 MPa
- Elongation at Break: 1.8 %
- Tensile Modulus: 7.10 GPa
$ 1462/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.012 cm/cm @Thickness 3.20 mm
$ 1834/MT
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.011 - 0.015 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 - 0.015 cm/cm
$ 1601/MT
- Specific Gravity: 1.81 g/cc
- Density: 1.81 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.070 %
- Linear Mold Shrinkage, Flow: 0.012 - 0.019 cm/cm @Thickness 3.20 mm
$ 2356/MT
- Density: 1.39 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm @Time 86400 sec
- Tensile Strength at Break: 54.0 MPa
- Elongation at Break: 8.5 %
- Tensile Modulus: 2.73 GPa
$ 1612/MT
- Density: 1.69 g/cc
- Density: 1.69 g/cc
- Moisture Absorption: 0.0400 %
- Linear Mold Shrinkage, Flow: 0.024 cm/cm
- Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec
$ 1592/MT
- Specific Gravity: 1.53 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.0090 cm/cm @Thickness 3.20 - 4.60 mm
$ 1570/MT
- Density: 1.52 g/cc
- Tensile Strength, Yield: 86.0 MPa
- Elongation at Break: 3.0 %
- Flexural Yield Strength: 132 MPa
- Flexural Modulus: 4.60 GPa
$ 1639/MT
- Density: 1.33 g/cc
- Density: 1.33 g/cc
- Moisture Absorption: 0.0900 %
- Moisture Absorption: 0.140 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Time 86400 sec
$ 1746/MT
- Density: 2.08 g/cc
- Density: 2.08 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0083 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.015 - 0.017 cm/cm @Time 86400 sec
$ 1507/MT
- Specific Gravity: 1.31 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Viscosity: 600000 cP
- Linear Mold Shrinkage, Flow: 0.0090 - 0.016 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.015 - 0.023 cm/cm @Thickness 2.30 - 4.60 mm
$ 1911/MT
- Density: 1.63 g/cc
- Tensile Strength at Break: 93.0 MPa
- Elongation at Break: 1.8 %
- Tensile Modulus: 9.51 GPa
- Flexural Strength: 144 MPa
$ 1829/MT
- Specific Gravity: 1.21 g/cc
- Density: 1.21 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 210000 cP
$ 2061/MT
- Density: 1.63 g/cc
- Tensile Strength at Break: 93.0 MPa
- Elongation at Break: 1.8 %
- Tensile Modulus: 9.51 GPa
- Flexural Strength: 144 MPa
$ 1516/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 260000 cP
$ 2185/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.32 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.080 %
- Linear Mold Shrinkage, Flow: 0.011 - 0.014 cm/cm @Thickness 3.20 mm
$ 1444/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.32 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.080 %
- Linear Mold Shrinkage, Flow: 0.011 - 0.014 cm/cm @Thickness 3.20 mm
$ 1705/MT
- Specific Gravity: 1.30 g/cc
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0080 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 39.0 MPa
- Tensile Strength, Yield: 46.0 MPa
$ 1980/MT
- Density: 1.40 g/cc
- Linear Mold Shrinkage, Flow: 0.0168 cm/cm
- Tensile Strength at Break: 50.0 MPa
- Elongation at Break: 4.5 %
- Flexural Yield Strength: 83.0 MPa
$ 1549/MT
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.70 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0080 cm/cm
$ 1866/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.080 %
- Viscosity: 260000 cP
$ 1814/MT
- Density: 1.52 g/cc
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Tensile Strength, Yield: 44.0 MPa
- Elongation at Break: 4.0 %
- Flexural Yield Strength: 81.0 MPa
$ 1670/MT
- Density: 1.52 g/cc
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Tensile Strength, Yield: 44.0 MPa
- Elongation at Break: 4.0 %
- Flexural Yield Strength: 81.0 MPa
$ 1959/MT
- Specific Gravity: 1.66 g/cc
- Water Absorption: 0.030 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1698/MT
- Density: 1.43 g/cc
- Density: 1.43 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0023 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm @Time 86400 sec
$ 1562/MT
- Specific Gravity: 1.47 g/cc
- Density: 1.47 g/cc
- Filler Content: 30 %
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.090 %
$ 1770/MT
- Specific Gravity: 1.62 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1964/MT
- Density: 1.50 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.090 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0090 cm/cm
$ 1512/MT
- Density: 1.70 g/cc
- Tensile Strength, Yield: 126 MPa
- Elongation at Break: 2.3 %
- Flexural Yield Strength: 187 MPa
- Flexural Modulus: 10.8 GPa
$ 1670/MT
- Specific Gravity: 1.25 g/cc
- Density: 1.26 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0095 - 0.011 cm/cm @Thickness 3.20 mm
$ 2001/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.12 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1628/MT
- Specific Gravity: 1.32 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.080 %
- Linear Mold Shrinkage, Flow: 0.015 - 0.018 cm/cm @Thickness 3.20 mm
$ 1568/MT
- Specific Gravity: 1.51 g/cc
- Density: 1.51 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0040 cm/cm @Thickness 3.20 mm
$ 1921/MT
- Density: 1.47 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
- Tensile Strength at Break: 67.0 MPa
- Elongation at Break: 4.0 %
- Tensile Modulus: 4.10 GPa
$ 1536/MT
- Specific Gravity: 1.34 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0080 - 0.011 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.010 - 0.014 cm/cm @Thickness 2.30 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0090 - 0.013 cm/cm @Thickness 0.750 - 2.30 mm
$ 1843/MT
- Specific Gravity: 1.32 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.080 %
- Linear Mold Shrinkage, Flow: 0.015 - 0.018 cm/cm @Thickness 3.20 mm
$ 1894/MT
- Specific Gravity: 1.31 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0090 - 0.016 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.015 - 0.023 cm/cm @Thickness 2.30 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.010 - 0.017 cm/cm @Thickness 0.750 - 2.30 mm
$ 1589/MT
- Specific Gravity: 1.31 g/cc
- Viscosity: 400000 cP
- Linear Mold Shrinkage, Flow: 0.019 - 0.021 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.020 - 0.022 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 54.0 MPa
$ 2482/MT
- Density: 1.43 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.26 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.010 cm/cm
$ 2005/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Viscosity: 310000 cP
$ 1831/MT
- Density: 1.78 g/cc
- Density: 1.78 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0051 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.015 cm/cm @Time 86400 sec
$ 1583/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1620/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.120 %
- Water Absorption at Saturation: 0.32 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1562/MT
- Density: 1.21 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm @Time 86400 sec
- Tensile Strength at Break: 49.0 MPa
$ 1476/MT
- Density: 1.40 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.70 % @Temperature 23.0 °C
- Melt Flow: 30 g/10 min @Load 2.16 kg, Temperature 265 °C
- Tensile Strength at Break: 54.0 MPa
$ 1990/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.010 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0285 - 0.0335 cm/cm @Thickness 3.20 mm
$ 1591/MT
- Specific Gravity: 1.60 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 6.40 mm
- Hardness, Rockwell R: 119
$ 1573/MT
- Density: 1.60 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Tensile Strength at Break: 101 MPa
- Elongation at Break: 2.3 %
- Tensile Modulus: 9.00 GPa
$ 1638/MT
- Density: 1.60 g/cc
- Density: 1.61 g/cc
- Moisture Absorption at Equilibrium: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0056 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm @Time 86400 sec
$ 1676/MT
- Specific Gravity: 1.54 g/cc
- Density: 1.54 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.090 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1694/MT
- Specific Gravity: 1.81 g/cc
- Density: 1.81 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.070 %
- Linear Mold Shrinkage, Flow: 0.012 - 0.019 cm/cm @Thickness 3.20 mm
$ 2115/MT
- Density: 1.14 g/cc
- Moisture Absorption: 0.0600 %
- Moisture Absorption: 0.300 %
- Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.020 - 0.040 cm/cm @Time 86400 sec
$ 2190/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.34 %
- Viscosity: 215000 cP
$ 1561/MT
- Specific Gravity: 1.55 g/cc
- Density: 1.55 g/cc
- Filler Content: 30 %
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.15 %
$ 1560/MT
- Density: 1.34 g/cc
- Moisture Absorption at Equilibrium: 0.30 %
- Water Absorption at Saturation: 0.80 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0070 cm/cm
$ 1626/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1782/MT
- Specific Gravity: 1.64 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 33 g/10 min @Load 5.00 kg, Temperature 266 °C
- Tensile Strength at Break: 145 MPa
$ 1738/MT
- Specific Gravity: 1.54 g/cc
- Density: 1.54 g/cc
- Moisture Absorption: 0.0600 %
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.15 %
$ 1777/MT
- Density: 4.50 g/cc
- Density: 4.50 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm @Time 86400 sec
- Tensile Strength at Break: 28.0 MPa
$ 2131/MT
- Specific Gravity: 1.50 g/cc
- Density: 1.56 g/cc
- Moisture Absorption at Equilibrium: 0.040 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.010 - 0.030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.020 - 0.040 cm/cm @Time 86400 sec
$ 1686/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.34 %
- Linear Mold Shrinkage, Flow: 0.019 - 0.024 cm/cm @Thickness 3.20 mm
$ 1608/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0080 - 0.010 cm/cm @Thickness 3.20 mm
- Tensile Strength, Yield: 54.0 MPa
- Elongation at Break: 150 %
$ 1872/MT
- Specific Gravity: 1.74 g/cc
- Density: 1.74 g/cc
- Filler Content: 36 %
- Moisture Absorption: 0.250 %
- Water Absorption at Saturation: 0.050 %
$ 2161/MT
- Specific Gravity: 1.45 g/cc
- Density: 1.45 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.28 %
- Melt Flow: 39 g/10 min @Load 2.16 kg, Temperature 250 °C
$ 1628/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.12 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1512/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption at Equilibrium: 0.80 %
- Water Absorption at Saturation: 3.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.010 - 0.013 cm/cm @Thickness 3.20 mm
$ 1900/MT
- Density: 1.68 g/cc
- Density: 1.68 g/cc
- Moisture Absorption: 0.0400 %
- Moisture Absorption: 0.0400 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1664/MT
- Specific Gravity: 1.54 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1749/MT
- Specific Gravity: 1.56 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 6.40 mm
- Tensile Strength, Yield: 114 MPa
$ 1710/MT
- Specific Gravity: 1.51 g/cc
- Density: 1.51 g/cc
- Filler Content: 17 %
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.17 %
$ 2502/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.120 %
- Water Absorption at Saturation: 0.32 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1607/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.35 %
- Linear Mold Shrinkage, Flow: 0.0090 - 0.016 cm/cm @Thickness 3.20 mm
$ 1564/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.28 g/cc
- Moisture Absorption: 0.0400 %
- Water Absorption at Saturation: 0.020 %
- Linear Mold Shrinkage, Flow: 0.0015 - 0.0025 cm/cm @Thickness 3.20 mm
$ 1598/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.011 cm/cm @Thickness 3.20 mm
$ 1881/MT
- Specific Gravity: 1.47 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0070 cm/cm @Thickness 6.40 mm
- Tensile Strength, Yield: 154 MPa
$ 1940/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.11 %
- Linear Mold Shrinkage, Flow: 0.021 - 0.027 cm/cm @Thickness 3.20 mm
$ 1617/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1667/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.80 %
- Water Absorption at Saturation: 4.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1756/MT
- Density: 1.34 g/cc
- Density: 1.35 g/cc
- Moisture Absorption: 0.0900 %
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.0039 - 0.0056 cm/cm @Time 86400 sec
$ 1475/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.17 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.050 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1763/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.010 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0285 - 0.0335 cm/cm @Thickness 3.20 mm
$ 1918/MT
- Density: 1.47 g/cc
- Density: 1.474 g/cc
- Linear Mold Shrinkage, Flow: 0.0029 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0129 cm/cm @Time 86400 sec
$ 1962/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 3.20 mm
- Melt Flow: 13 g/10 min @Load 5.00 kg, Temperature 250 °C
- Tensile Strength at Break: 50.0 MPa
- Tensile Strength, Yield: 51.0 MPa
$ 1559/MT
- Specific Gravity: 1.69 g/cc
- Density: 1.69 g/cc
- Filler Content: 30 %
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.25 %
$ 2530/MT
- Specific Gravity: 1.22 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 1.20e+6 cP
- Linear Mold Shrinkage, Flow: 0.024 - 0.027 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.024 - 0.027 cm/cm @Thickness 3.20 mm
$ 1498/MT
- Specific Gravity: 1.54 g/cc
- Density: 1.54 g/cc
- Moisture Absorption: 0.0600 %
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.15 %
$ 1927/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.30 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.012 cm/cm @Thickness 3.20 mm
$ 1740/MT
- Specific Gravity: 1.43 g/cc
- Density: 1.43 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.26 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.010 cm/cm @Thickness 3.20 mm
$ 1883/MT
- Specific Gravity: 1.60 g/cc
- Density: 1.60 g/cc
- Moisture Absorption: 0.0300 %
- Moisture Absorption: 0.0500 %
- Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec
$ 1673/MT
- Density: 1.71 g/cc
- Moisture Absorption: 0.250 %
- Water Absorption at Saturation: 0.050 %
- Melt Index of Compound: 33 g/10 min @Load 5.00 kg, Temperature 280 °C
- Tensile Strength at Break: 125 MPa
$ 1503/MT
- Density: 1.40 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm
- Melt Flow: 11 g/10 min @Load 5.00 kg, Temperature 250 °C
$ 1717/MT
- Specific Gravity: 1.33 g/cc
- Density: 1.33 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.12 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1996/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Moisture Absorption: 0.0300 %
- Water Absorption at Saturation: 0.10 %
- Viscosity: 260000 cP
$ 1960/MT
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0070 - 0.010 cm/cm
- Melt Flow: 6.0 g/10 min @Load 5.00 kg, Temperature 250 °C
$ 1998/MT
- Density: 1.46 g/cc
- Moisture Absorption: 0.0900 %
- Water Absorption at Saturation: 0.90 %
- Linear Mold Shrinkage, Flow: 0.012 - 0.017 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 - 0.017 cm/cm
$ 1615/MT
- Density: 1.37 g/cc
- Linear Mold Shrinkage, Flow: 0.0090 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0091 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.0103 cm/cm @Time 86400 sec
$ 1507/MT
- Density: 1.50 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.17 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.0090 cm/cm
$ 1445/MT
- Specific Gravity: 1.77 g/cc
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1502/MT
- Specific Gravity: 1.60 g/cc
- Density: 1.54 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.16 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm
$ 1911/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.17 g/cc
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 265 °C
$ 2302/MT
- Density: 2.45 g/cc
- Density: 2.45 g/cc
- Moisture Absorption: 2.39 %
- Moisture Absorption: 2.40 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Time 86400 sec
$ 2300/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.090 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
$ 2014/MT
- Density: 1.63 g/cc
- Tensile Strength at Break: 93.0 MPa
- Elongation at Break: 1.8 %
- Tensile Modulus: 9.51 GPa
- Flexural Strength: 144 MPa
$ 2364/MT
- Density: 1.42 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm
- Tensile Strength at Break: 151 MPa
- Elongation at Break: 1.0 - 2.0 %
- Flexural Strength: 214 MPa
$ 1634/MT
- Specific Gravity: 1.50 g/cc
- Density: 1.50 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.35 %
- Viscosity: 170000 cP
$ 1674/MT
- Specific Gravity: 1.57 g/cc
- Density: 1.56 g/cc
- Moisture Absorption at Equilibrium: 0.060 %
- Moisture Absorption at Equilibrium: 0.050 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.010 - 0.040 cm/cm @Time 86400 sec
$ 1525/MT
- Specific Gravity: 1.66 g/cc
- Density: 1.66 g/cc
- Moisture Absorption at Equilibrium: 0.51 %
- Moisture Absorption at Equilibrium: 0.42 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.010 - 0.030 cm/cm @Time 86400 sec
$ 1516/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.018 - 0.028 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 38.0 MPa
$ 1622/MT
- Specific Gravity: 1.53 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0090 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0080 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0080 - 0.011 cm/cm @Thickness 3.20 - 4.60 mm
$ 2060/MT
- Specific Gravity: 1.58 g/cc
- Density: 1.58 g/cc
- Filler Content: 30 %
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.26 %
$ 1842/MT
- Specific Gravity: 1.31 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0090 - 0.016 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.015 - 0.023 cm/cm @Thickness 2.30 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.010 - 0.017 cm/cm @Thickness 0.750 - 2.30 mm
$ 1489/MT
- Specific Gravity: 1.49 g/cc
- Density: 1.49 g/cc
- Moisture Absorption: 0.420 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0153 - 0.0157 cm/cm
$ 1656/MT
- Density: 1.56 g/cc
- Tensile Strength at Break: 115 MPa
- Elongation at Break: 2.8 %
- Tensile Modulus: 7.94 GPa
- Flexural Strength: 165 MPa
$ 1980/MT
- Density: 1.40 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.019 cm/cm
- Tensile Strength at Break: 45.0 MPa
- Tensile Strength, Yield: 47.0 MPa
$ 1773/MT
- Density: 2.45 g/cc
- Density: 2.45 g/cc
- Moisture Absorption: 2.39 %
- Moisture Absorption: 2.40 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Time 86400 sec
$ 1683/MT
- Specific Gravity: 1.50 g/cc
- Density: 1.50 g/cc
- Filler Content: 10 %
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.27 %
$ 1965/MT
- Specific Gravity: 1.55 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 6.40 mm
- Tensile Strength, Yield: 106 MPa
$ 1497/MT
- Specific Gravity: 1.28 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.330 %
- Moisture Absorption: 0.470 %
- Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec
$ 1742/MT
- Specific Gravity: 1.50 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.010 - 0.012 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 96.0 MPa
- Tensile Strength at Break: 102 MPa
$ 2022/MT
- Specific Gravity: 1.50 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.010 - 0.012 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 96.0 MPa
- Tensile Strength at Break: 102 MPa
$ 1508/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.010 cm/cm @Thickness 3.20 mm
$ 1846/MT
- Specific Gravity: 1.50 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.010 - 0.012 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 96.0 MPa
- Tensile Strength at Break: 102 MPa
$ 2535/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm @Thickness 3.20 mm
$ 2590/MT
- Density: 1.60 g/cc
- Density: 1.61 g/cc
- Linear Mold Shrinkage, Flow: 0.0056 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm @Time 86400 sec
$ 1580/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0080 - 0.010 cm/cm @Thickness 3.20 mm
- Melt Flow: 16 g/10 min @Load 5.00 kg, Temperature 250 °C
$ 1873/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.070 %
- Water Absorption at Saturation: 0.28 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1667/MT
- Specific Gravity: 1.67 g/cc
- Viscosity: 400000 cP
- Tensile Strength at Break: 131 MPa
- Elongation at Break: 3.0 %
- Flexural Strength: 193 MPa
$ 1527/MT
- Density: 1.56 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.27 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1617/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.35 g/cc
- Moisture Absorption at Equilibrium: 0.71 %
- Moisture Absorption at Equilibrium: 0.71 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Time 86400 sec
$ 1700/MT
- Density: 1.56 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.27 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1479/MT
- Density: 1.59 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Tensile Strength at Break: 118 MPa
- Elongation at Break: 2.1 %
- Tensile Modulus: 11.1 GPa
$ 1489/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.18 g/cc
- Moisture Absorption: 0.120 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1890/MT
- Density: 1.69 g/cc
- Density: 1.69 g/cc
- Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.024 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.017 - 0.020 cm/cm @Time 86400 sec
$ 1546/MT
- Specific Gravity: 1.40 g/cc
- Density: 1.40 g/cc
- Moisture Absorption: 0.310 %
- Moisture Absorption: 0.410 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
$ 1828/MT
- Density: 1.31 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.34 %
- Linear Mold Shrinkage, Flow: 0.011 - 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 - 0.018 cm/cm
$ 2044/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.17 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.050 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1484/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.17 g/cc
- Moisture Absorption at Equilibrium: 0.010 %
- Water Absorption at Saturation: 0.010 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1605/MT
- Specific Gravity: 1.49 g/cc
- Density: 1.49 g/cc
- Melt Flow: 36 g/10 min @Load 1.20 kg, Temperature 266 °C
- Melt Flow: 64 g/10 min @Load 2.16 kg, Temperature 265 °C
- Melt Index of Compound: 52 g/10 min @Load 2.16 kg, Temperature 265 °C
$ 1743/MT
- Density: 1.53 g/cc
- Linear Mold Shrinkage, Flow: 0.0028 cm/cm
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 2.5 %
- Flexural Yield Strength: 191 MPa
$ 1602/MT
- Specific Gravity: 1.51 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0060 cm/cm @Thickness 6.40 mm
- Hardness, Rockwell R: 119
$ 1619/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.011 cm/cm
$ 1696/MT
- Specific Gravity: 1.64 g/cc
- Density: 1.64 g/cc
- Moisture Absorption at Equilibrium: 0.070 %
- Water Absorption at Saturation: 0.25 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0050 cm/cm
$ 1640/MT
- Specific Gravity: 1.52 g/cc
- Density: 1.52 g/cc
- Filler Content: 25 %
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.23 %
$ 1654/MT
- Density: 1.52 g/cc
- Linear Mold Shrinkage, Flow: 0.021 cm/cm
- Linear Mold Shrinkage, Flow: 0.00070 cm/cm @Time 86400 sec
- Tensile Strength at Break: 43.0 MPa
- Tensile Strength, Yield: 43.0 MPa
$ 1782/MT
- Density: 1.83 g/cc
- Tensile Strength at Break: 97.0 MPa
- Elongation at Break: 1.5 %
- Tensile Modulus: 13.92 GPa
- Flexural Strength: 131 MPa
$ 1871/MT
- Specific Gravity: 1.32 g/cc
- Density: 1.32 g/cc
- Moisture Absorption: 0.340 %
- Water Absorption at Saturation: 0.080 %
- Linear Mold Shrinkage, Flow: 0.021 - 0.024 cm/cm @Thickness 3.20 mm
$ 1571/MT
- Density: 1.50 g/cc
- Density: 1.51 g/cc
- Moisture Absorption at Equilibrium: 0.070 %
- Moisture Absorption at Equilibrium: 0.050 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0040 cm/cm @Time 86400 sec
$ 1659/MT
- Density: 1.44 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0080 cm/cm
$ 2141/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.16 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1910/MT
- Specific Gravity: 1.60 g/cc
- Density: 1.61 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.23 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0040 cm/cm
$ 1873/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1447/MT
- Specific Gravity: 1.46 g/cc
- Water Absorption: 0.090 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.0080 cm/cm @Thickness 1.50 - 3.20 mm
$ 1483/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.12 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 2063/MT
- Density: 1.52 g/cc
- Linear Mold Shrinkage, Flow: 0.021 cm/cm
- Linear Mold Shrinkage, Flow: 0.00070 cm/cm @Time 86400 sec
- Tensile Strength at Break: 43.0 MPa
- Tensile Strength, Yield: 43.0 MPa
$ 2187/MT
- Specific Gravity: 1.52 g/cc
- Density: 1.52 g/cc
- Moisture Absorption: 0.0300 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1773/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.52 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.25 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1735/MT
- Specific Gravity: 1.46 g/cc
- Density: 1.46 g/cc
- Filler Content: 30 %
- Moisture Absorption: 0.230 %
- Water Absorption at Saturation: 0.71 %
$ 1475/MT
- Density: 1.59 g/cc
- Density: 1.59 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0021 - 0.0055 cm/cm @Time 86400 sec
$ 1478/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.030 cm/cm @Time 86400 sec
- Tensile Strength at Break: 44.0 MPa
- Elongation at Break: 30.6 %
- Tensile Modulus: 2.40 GPa
$ 1514/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.52 g/cc
- Moisture Absorption: 0.0500 %
- Moisture Absorption: 0.0600 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Time 86400 sec
$ 1730/MT
- Specific Gravity: 1.43 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 6.40 mm
- Tensile Strength, Yield: 96.0 MPa
$ 1793/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.16 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.37 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1891/MT
- Specific Gravity: 1.51 g/cc
- Density: 1.51 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0070 cm/cm
$ 1625/MT
- Specific Gravity: 1.27 g/cc
- Density: 1.27 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1672/MT
- Specific Gravity: 1.17 g/cc
- Density: 1.17 g/cc
- Moisture Absorption: 0.270 %
- Water Absorption at Saturation: 0.70 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1515/MT
- Specific Gravity: 1.25 g/cc
- Density: 1.26 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0095 - 0.011 cm/cm @Thickness 3.20 mm
$ 1471/MT
- Specific Gravity: 1.32 g/cc
- Linear Mold Shrinkage, Flow: 0.015 - 0.018 cm/cm @Thickness 3.20 mm
- Melt Flow: 30 g/10 min @Load 1.20 kg, Temperature 250 °C
- Tensile Strength at Break: 46.0 MPa
- Tensile Strength, Yield: 46.0 MPa
$ 2477/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.16 %
- Linear Mold Shrinkage, Flow: 0.016 - 0.024 cm/cm @Thickness 3.20 mm
$ 1883/MT
- Specific Gravity: 1.29 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.017 - 0.023 cm/cm @Thickness 3.20 mm
- Hardness, Rockwell R: 117
- Tensile Strength, Yield: 51.0 MPa
$ 1628/MT
- Density: 1.10 g/cc
- Moisture Absorption at Equilibrium: 1.2 %
- Water Absorption at Saturation: 3.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.012 - 0.020 cm/cm
- Melt Flow: 6.0 g/10 min @Load 10.0 kg, Temperature 280 °C
$ 2003/MT
- Density: 1.10 g/cc
- Moisture Absorption at Equilibrium: 1.2 %
- Water Absorption at Saturation: 3.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.012 - 0.020 cm/cm
- Melt Flow: 6.0 g/10 min @Load 10.0 kg, Temperature 280 °C
$ 1530/MT
- Specific Gravity: 1.47 g/cc
- Density: 1.46 g/cc
- Moisture Absorption: 0.0500 %
- Moisture Absorption: 0.0700 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
$ 2337/MT
- Density: 1.10 g/cc
- Moisture Absorption at Equilibrium: 1.2 %
- Water Absorption at Saturation: 3.5 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.012 - 0.020 cm/cm
- Melt Flow: 6.0 g/10 min @Load 10.0 kg, Temperature 280 °C
$ 1456/MT
- Specific Gravity: 1.17 g/cc
- Density: 1.17 g/cc
- Moisture Absorption: 0.270 %
- Water Absorption at Saturation: 0.70 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1665/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.0300 %
- Water Absorption at Saturation: 0.090 %
- Linear Mold Shrinkage, Flow: 0.010 cm/cm @Thickness 3.20 mm
$ 1448/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0080 - 0.011 cm/cm @Thickness 0.750 - 2.30 mm
$ 1741/MT
- Specific Gravity: 1.39 g/cc
- Density: 1.39 g/cc
- Filler Content: 20 %
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.10 %
$ 1532/MT
- Density: 1.40 g/cc
- Linear Mold Shrinkage, Flow: 0.0077 cm/cm
- Tensile Strength at Break: 58.0 MPa
- Elongation at Break: 4.9 %
- Flexural Yield Strength: 80.0 MPa
$ 1453/MT
- Density: 2.70 g/cc
- Density: 2.70 g/cc
- Moisture Absorption: 0.0700 %
- Moisture Absorption: 0.0900 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Time 86400 sec
$ 1555/MT
- Density: 1.44 g/cc
- Linear Mold Shrinkage, Flow: 0.010 - 0.017 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 - 0.017 cm/cm
- Tensile Strength, Yield: 41.0 MPa
- Elongation at Yield: 12.2 %
$ 1497/MT
- Viscosity Measurement: 0.42 - 0.52
- Acid Value: 50 - 180
$ 1823/MT
- Density: 1.17 g/cc
- Density: 1.17 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.28 %
- Linear Mold Shrinkage, Flow: 0.010 - 0.012 cm/cm @Thickness 3.20 mm
$ 1973/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.17 g/cc
- Moisture Absorption at Equilibrium: 0.010 %
- Water Absorption at Saturation: 0.010 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1496/MT
- Specific Gravity: 1.44 g/cc
- Density: 1.44 g/cc
- Water Absorption: 0.090 % @Time 86400 sec
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
$ 1963/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption at Saturation: 0.010 %
- Linear Mold Shrinkage, Flow: 0.0080 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Transverse: 0.0086 cm/cm @Thickness 0.750 - 2.30 mm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 265 °C
$ 1917/MT
- Density: 1.40 g/cc
- Density: 1.40 g/cc
- Moisture Absorption: 0.0700 %
- Linear Mold Shrinkage, Flow: 0.026 - 0.028 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.025 - 0.027 cm/cm @Time 86400 sec
$ 1706/MT
- Specific Gravity: 1.31 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0090 - 0.016 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.015 - 0.023 cm/cm @Thickness 2.30 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.010 - 0.017 cm/cm @Thickness 0.750 - 2.30 mm
$ 1655/MT
- Specific Gravity: 1.30 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.017 - 0.023 cm/cm @Thickness 3.20 mm
- Hardness, Rockwell R: 117
- Tensile Strength, Yield: 50.0 MPa
$ 1704/MT
- Specific Gravity: 1.54 g/cc
- Density: 1.54 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.090 %
$ 1497/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.120 %
- Water Absorption at Saturation: 0.32 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1476/MT
- Specific Gravity: 1.21 g/cc
- Water Absorption: 0.12 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0080 - 0.010 cm/cm
- Hardness, Rockwell R: 112
$ 2462/MT
- Specific Gravity: 1.43 g/cc
- Density: 1.43 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.26 %
$ 1495/MT
- Specific Gravity: 1.52 g/cc
- Density: 1.52 g/cc
- Filler Content: 25 %
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.23 %
$ 1647/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 260000 cP
$ 1930/MT
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Water Absorption at Saturation: 0.50 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0070 - 0.011 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 250 °C
$ 1710/MT
- Density: 1.60 g/cc
- Moisture Absorption at Equilibrium: 0.050 %
- Water Absorption at Saturation: 0.25 % @Temperature 23.0 °C
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 265 °C
- Tensile Strength at Break: 150 MPa
$ 1585/MT
- Specific Gravity: 1.56 g/cc
- Density: 1.56 g/cc
- Moisture Absorption: 0.0900 %
- Water Absorption at Saturation: 0.23 %
- Linear Mold Shrinkage, Flow: 0.0028 cm/cm @Thickness 3.20 mm
$ 1536/MT
- Specific Gravity: 1.53 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1705/MT
- Specific Gravity: 1.45 g/cc
- Density: 1.45 g/cc
- Filler Content: 7.0 %
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.28 %
$ 1906/MT
- Specific Gravity: 1.25 g/cc
- Density: 1.25 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1469/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.21 g/cc
- Water Absorption at Saturation: 0.14 %
- Linear Mold Shrinkage, Flow: 0.016 - 0.018 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.016 - 0.018 cm/cm @Thickness 3.20 mm
$ 1942/MT
- Density: 1.38 g/cc
- Density: 1.38 g/cc
- Moisture Absorption: 0.0900 %
- Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.020 - 0.040 cm/cm @Time 86400 sec
$ 2255/MT
- Density: 1.58 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0060 cm/cm
- Tensile Strength at Break: 100 MPa
- Elongation at Break: 2.0 - 3.0 %
- Flexural Strength: 160 MPa
$ 1490/MT
- Density: 2.70 g/cc
- Density: 2.70 g/cc
- Moisture Absorption: 0.0700 %
- Moisture Absorption: 0.0900 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Time 86400 sec
$ 2396/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.19 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.16 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1708/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1674/MT
- Specific Gravity: 1.54 g/cc
- Density: 1.54 g/cc
- Filler Content: 15 %
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.23 %
$ 1873/MT
- Density: 1.30 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 5.00 kg, Temperature 250 °C
- Tensile Strength at Break: 45.0 MPa
- Tensile Strength, Yield: 55.0 MPa
$ 2528/MT
- Specific Gravity: 1.45 g/cc
- Density: 1.45 g/cc
- Filler Content: 20 %
- Moisture Absorption: 0.0300 %
- Water Absorption at Saturation: 0.15 %
$ 2583/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Viscosity: 90000 cP
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0050 cm/cm @Thickness 3.20 mm
$ 1560/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Viscosity: 90000 cP
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0050 cm/cm @Thickness 3.20 mm
$ 1598/MT
- Specific Gravity: 1.44 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0070 - 0.0090 cm/cm @Thickness 1.50 - 3.20 mm
$ 1482/MT
- Density: 1.08 g/cc
- Moisture Absorption at Equilibrium: 1.2 %
- Water Absorption at Saturation: 4.2 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.014 - 0.018 cm/cm
- Hardness, H358/30: 80.0 MPa
$ 2525/MT
- Specific Gravity: 1.19 g/cc
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.080 %
- Water Absorption at Saturation: 0.30 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0080 - 0.012 cm/cm @Thickness 3.20 mm
$ 1881/MT
- Specific Gravity: 1.59 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1689/MT
- Specific Gravity: 1.58 g/cc
- Density: 1.53 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.16 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm
$ 2345/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.14 %
- Water Absorption at Saturation: 0.16 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1469/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.53 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.26 %
$ 2526/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.17 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.49 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1560/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.53 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.28 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
$ 1685/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.42 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
$ 2025/MT
- Density: 1.56 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.27 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1571/MT
- Density: 1.45 g/cc
- Moisture Absorption at Equilibrium: 0.12 %
- Water Absorption at Saturation: 0.35 % @Temperature 23.0 °C
- Melt Flow: 12 g/10 min @Load 1.20 kg, Temperature 265 °C
- Tensile Strength at Break: 100 MPa
$ 1546/MT
- Density: 1.39 g/cc
- Linear Mold Shrinkage, Flow: 0.010 - 0.020 cm/cm
- Melt Flow: 27 g/10 min @Load 2.16 kg, Temperature 260 °C
- Hardness, Rockwell R: 122
- Hardness, H358/30: 130 MPa
$ 2110/MT
- Specific Gravity: 1.54 g/cc
- Density: 1.54 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.090 %
$ 1504/MT
- Specific Gravity: 1.24 g/cc
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
- Melt Flow: 4.1 g/10 min @Load 5.00 kg, Temperature 250 °C
$ 1445/MT
- Specific Gravity: 1.41 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0090 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0080 cm/cm @Thickness 1.50 - 3.20 mm
$ 2041/MT
- Density: 1.43 g/cc
- Density: 1.43 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0023 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm @Time 86400 sec
$ 2322/MT
- Specific Gravity: 1.54 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0090 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0080 cm/cm @Thickness 1.50 - 3.20 mm
$ 1900/MT
- Specific Gravity: 1.45 g/cc
- Density: 1.45 g/cc
- Filler Content: 17 %
- Water Absorption: 0.070 % @Time 86400 sec
- Moisture Absorption: 0.0700 %
$ 1765/MT
- Density: 1.22 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.010 cm/cm
- Melt Index of Compound: 18 g/10 min @Load 5.00 kg, Temperature 250 °C
$ 1478/MT
- Specific Gravity: 1.40 g/cc
- Density: 1.40 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.36 %
- Viscosity: 260000 cP
$ 1753/MT
- Specific Gravity: 1.63 g/cc
- Density: 1.63 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.090 %
$ 1487/MT
- Density: 1.64 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.25 %
- Viscosity: 92000 cP
- Melt Index of Compound: 6.0 g/10 min @Load 2.16 kg, Temperature 250 °C
$ 2056/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.18 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Melt Flow: 21 g/10 min @Load 2.16 kg, Temperature 265 °C
$ 1523/MT
- Specific Gravity: 1.57 g/cc
- Density: 1.56 g/cc
- Filler Content: 30 %
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.16 %
$ 2065/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.010 %
- Water Absorption at Saturation: 0.10 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0285 - 0.0335 cm/cm @Thickness 3.20 mm
$ 2073/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.32 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.080 %
- Linear Mold Shrinkage, Flow: 0.011 - 0.014 cm/cm @Thickness 3.20 mm
$ 2301/MT
- Specific Gravity: 1.23 g/cc
- Density: 1.23 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1802/MT
- Density: 1.57 g/cc
- Density: 1.58 g/cc
- Moisture Absorption: 0.0500 %
- Moisture Absorption: 0.0600 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Time 86400 sec
$ 2465/MT
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.70 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0080 cm/cm
$ 1808/MT
- Specific Gravity: 2.05 g/cc
- Density: 2.044 g/cc
- Moisture Absorption: 0.0400 %
- Moisture Absorption: 0.0600 %
- Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec
$ 1652/MT
- Density: 1.65 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Tensile Strength at Break: 112 MPa
- Elongation at Break: 2.9 %
- Tensile Modulus: 8.80 GPa
$ 1940/MT
- Specific Gravity: 1.52 g/cc
- Density: 1.52 g/cc
- Moisture Absorption: 0.0300 %
- Water Absorption at Saturation: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.0090 cm/cm @Thickness 3.20 mm
$ 2009/MT
- Density: 1.25 g/cc
- Linear Mold Shrinkage, Flow: 0.022 cm/cm
- Linear Mold Shrinkage, Flow: 0.015 - 0.025 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.015 - 0.025 cm/cm @Time 86400 sec
- Tensile Strength, Yield: 20.0 MPa
$ 1707/MT
- Specific Gravity: 1.64 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 33 g/10 min @Load 5.00 kg, Temperature 266 °C
- Melt Index of Compound: 22 g/10 min @Load 5.00 kg, Temperature 265 °C
$ 1531/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.34 %
- Viscosity: 165000 cP
$ 1579/MT
- Specific Gravity: 1.53 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1869/MT
- Specific Gravity: 1.31 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Viscosity: 600000 cP
- Linear Mold Shrinkage, Flow: 0.0090 - 0.016 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.015 - 0.023 cm/cm @Thickness 2.30 - 4.60 mm
$ 1523/MT
- Density: 1.56 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.27 %
- Melt Index of Compound: 14 g/10 min @Load 2.16 kg, Temperature 265 °C
- Tensile Strength at Break: 155 MPa
$ 1644/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.018 - 0.028 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 38.0 MPa
$ 1903/MT
- Density: 1.54 g/cc
- Tensile Strength at Break: 187 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 11.57 GPa
- Flexural Strength: 247 MPa
$ 1563/MT
- Specific Gravity: 1.54 g/cc
- Density: 1.54 g/cc
- Moisture Absorption: 0.100 %
- Water Absorption at Saturation: 0.090 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
$ 1558/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.16 %
- Linear Mold Shrinkage, Flow: 0.016 - 0.024 cm/cm @Thickness 3.20 mm
$ 2233/MT
- Density: 1.54 g/cc
- Density: 1.546 g/cc
- Moisture Absorption: 0.0500 %
- Moisture Absorption: 0.0700 %
- Linear Mold Shrinkage, Flow: 0.0147 cm/cm @Time 86400 sec
$ 1695/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.80 %
- Water Absorption at Saturation: 4.0 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
$ 1658/MT
- Specific Gravity: 1.60 g/cc
- Density: 1.61 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.23 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0040 cm/cm
$ 1557/MT
- Specific Gravity: 1.58 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1693/MT
- Specific Gravity: 1.62 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1465/MT
- Specific Gravity: 1.70 g/cc
- Density: 1.70 g/cc
- Melt Flow: 45 g/10 min @Load 2.16 kg, Temperature 265 °C
- Melt Index of Compound: 30 g/10 min @Load 2.16 kg, Temperature 265 °C
- Tensile Strength at Break: 90.0 MPa
$ 1540/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.53 g/cc
- Filler Content: 30 %
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.26 %
$ 1780/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0070 - 0.011 cm/cm @Thickness 3.20 mm
$ 1445/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.14 %
- Water Absorption at Saturation: 0.16 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1505/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.12 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 1445/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Filler Content: 10 %
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.20 %
$ 1614/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Filler Content: 10 %
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.20 %
$ 2561/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Filler Content: 10 %
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.20 %
$ 1838/MT
- Specific Gravity: 1.52 g/cc
- Density: 1.52 g/cc
- Filler Content: 17 %
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.17 %
$ 2335/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Filler Content: 10 %
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.20 %
$ 1900/MT
- Density: 1.41 g/cc
- Tensile Strength, Yield: 40.0 MPa
- Elongation at Yield: >= 20 %
- Tensile Modulus: 2.20 GPa
- Flexural Yield Strength: 61.0 MPa
$ 2377/MT
- Density: 1.68 g/cc
- Density: 1.68 g/cc
- Moisture Absorption: 0.0400 %
- Moisture Absorption: 0.0400 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Time 86400 sec
$ 1632/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Filler Content: 10 %
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.20 %
$ 1579/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Filler Content: 10 %
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.20 %
$ 1471/MT
- Specific Gravity: 1.40 g/cc
- Density: 1.40 g/cc
- Moisture Absorption: 0.0800 %
- Water Absorption at Saturation: 0.36 %
- Linear Mold Shrinkage, Flow: 0.011 - 0.018 cm/cm
$ 1467/MT
- Specific Gravity: 1.42 g/cc
- Density: 1.42 g/cc
- Filler Content: 15 %
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.26 %
$ 1612/MT
- Specific Gravity: 1.24 g/cc
- Water Absorption at Saturation: 0.040 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
- Melt Flow: 6.5 g/10 min @Load 5.00 kg, Temperature 250 °C
$ 1903/MT
- Density: 1.43 g/cc
- Density: 1.441 g/cc
- Moisture Absorption at Equilibrium: 0.42 %
- Moisture Absorption at Equilibrium: 0.31 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Time 86400 sec
$ 1579/MT
- Specific Gravity: 1.81 g/cc
- Density: 1.80 g/cc
- Moisture Absorption: 0.0200 %
- Moisture Absorption: 0.0300 %
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
$ 2233/MT
- Specific Gravity: 1.21 g/cc
- Density: 1.21 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 210000 cP
$ 1574/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.12 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2369/MT
- Specific Gravity: 1.34 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0080 - 0.011 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.010 - 0.014 cm/cm @Thickness 2.30 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0090 - 0.013 cm/cm @Thickness 0.750 - 2.30 mm
$ 1597/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.130 %
- Water Absorption at Saturation: 0.37 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1839/MT
- Density: 1.45 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0060 cm/cm
- Tensile Strength, Yield: 109 MPa
- Elongation at Yield: 3.3 %
- Tensile Modulus: 6.60 GPa
$ 1736/MT
- Specific Gravity: 1.21 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 3.20 mm
$ 2239/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.34 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.50 %
$ 1453/MT
- Density: 1.57 g/cc
- Linear Mold Shrinkage, Flow: 0.011 - 0.018 cm/cm
- Tensile Strength at Break: 50.0 MPa
- Elongation at Break: 2.7 %
- Tensile Modulus: 4.40 GPa
$ 1447/MT
- Specific Gravity: 1.32 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.080 %
- Linear Mold Shrinkage, Flow: 0.015 - 0.018 cm/cm @Thickness 3.20 mm
$ 2406/MT
- Specific Gravity: 1.32 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.140 %
- Water Absorption at Saturation: 0.50 %
- Viscosity: 260000 cP
$ 1597/MT
- Specific Gravity: 1.16 g/cc
- Density: 1.17 g/cc
- Moisture Absorption at Equilibrium: 1.1 %
- Water Absorption at Saturation: 3.8 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.010 - 0.012 cm/cm
$ 1858/MT
- Density: 1.62 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm @Time 86400 sec
- Tensile Strength at Break: 119 MPa
- Elongation at Break: 2.7 %
- Tensile Modulus: 10.44 GPa
$ 1583/MT
- Density: 1.22 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.020 - 0.024 cm/cm
- Tensile Strength, Yield: 36.0 MPa
- Tensile Modulus: 1.50 GPa
$ 1478/MT
- Specific Gravity: 1.56 g/cc
- Density: 1.56 g/cc
- Filler Content: 30 %
- Viscosity: 110000 cP
- Melt Flow: 23 g/10 min @Load 5.00 kg, Temperature 265 °C
$ 1912/MT
- Density: 1.42 g/cc
- Moisture Absorption: 0.0500 %
- Moisture Absorption: 0.0900 %
- Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.010 - 0.030 cm/cm @Time 86400 sec
$ 2183/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.11 %
- Linear Mold Shrinkage, Flow: 0.021 - 0.027 cm/cm @Thickness 3.20 mm
$ 1501/MT
- Specific Gravity: 1.31 g/cc
- Water Absorption: 0.080 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0090 - 0.016 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.015 - 0.023 cm/cm @Thickness 2.30 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.010 - 0.017 cm/cm @Thickness 0.750 - 2.30 mm
$ 1502/MT
- Specific Gravity: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.010 - 0.012 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 82.0 MPa
- Tensile Strength at Break: 89.0 MPa
$ 1473/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.40 %
- Viscosity: 260000 cP
$ 1946/MT
- Specific Gravity: 1.25 g/cc
- Density: 1.25 g/cc
- Moisture Absorption at Equilibrium: 0.14 %
- Water Absorption at Saturation: 0.42 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
$ 1606/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.12 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1480/MT
- Specific Gravity: 1.53 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0090 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0080 cm/cm @Thickness 1.50 - 3.20 mm
$ 1714/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption at Equilibrium: 0.14 %
- Water Absorption at Saturation: 0.16 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2523/MT
- Specific Gravity: 1.60 g/cc
- Density: 1.61 g/cc
- Moisture Absorption: 0.0600 %
- Water Absorption at Saturation: 0.23 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0040 cm/cm
$ 1728/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.130 %
- Water Absorption at Saturation: 0.37 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1506/MT
- Specific Gravity: 1.32 g/cc
- Density: 1.31 g/cc
- Moisture Absorption at Equilibrium: 0.070 %
- Water Absorption at Saturation: 0.080 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.015 - 0.018 cm/cm @Thickness 3.20 mm
$ 1637/MT
- Density: 1.44 g/cc
- Density: 1.44 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
- Linear Mold Shrinkage, Transverse: 0.010 - 0.030 cm/cm @Time 86400 sec
- Tensile Strength at Break: 94.0 MPa
$ 1584/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.0500 %
- Water Absorption at Saturation: 0.12 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm
$ 2200/MT
- Density: 1.79 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Tensile Strength at Break: 96.0 MPa
- Elongation at Break: 1.4 %
- Tensile Modulus: 11.0 GPa
$ 2272/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.36 g/cc
- Filler Content: 6.0 %
- Moisture Absorption: 0.0700 %
- Water Absorption at Saturation: 0.20 %
$ 1587/MT
- Specific Gravity: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.010 - 0.012 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 17 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 82.0 MPa
$ 2382/MT
- Specific Gravity: 1.33 g/cc
- Water Absorption: 0.14 % @Time 86400 sec
- Moisture Absorption at Equilibrium: 0.60 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0080 - 0.011 cm/cm @Thickness 0.750 - 2.30 mm
- Linear Mold Shrinkage, Flow: 0.010 - 0.014 cm/cm @Thickness 2.30 - 4.60 mm
$ 1538/MT
- Specific Gravity: 1.23 g/cc
- Density: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.010 cm/cm @Thickness 3.20 mm
- Melt Flow: 14 g/10 min @Load 5.00 kg, Temperature 266 °C
- Melt Index of Compound: 14 g/10 min @Load 5.00 kg, Temperature 265 °C
$ 1570/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.50 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1666/MT
- Specific Gravity: 1.50 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
$ 1678/MT
- Specific Gravity: 1.33 g/cc
- Density: 1.33 g/cc
- Moisture Absorption at Equilibrium: 0.060 %
- Water Absorption at Saturation: 0.12 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
$ 1955/MT
- Specific Gravity: 1.52 g/cc
- Water Absorption: 0.050 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 - 4.60 mm
$ 1620/MT
- Specific Gravity: 1.50 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Transverse: 0.010 - 0.012 cm/cm @Thickness 3.20 mm
- Melt Index of Compound: 12 g/10 min @Load 2.16 kg, Temperature 250 °C
$ 1546/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Moisture Absorption at Equilibrium: 0.080 %
- Water Absorption at Saturation: 0.28 % @Temperature 23.0 °C
- Linear Mold Shrinkage, Flow: 0.0065 - 0.0073 cm/cm @Thickness 3.20 mm
$ 2203/MT
- Specific Gravity: 1.43 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 1.50 - 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0090 cm/cm @Thickness 3.20 - 4.60 mm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0080 cm/cm @Thickness 1.50 - 3.20 mm
$ 1550/MT
- Specific Gravity: 1.54 g/cc
- Water Absorption: 0.060 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0080 cm/cm @Thickness 3.20 mm
- Tensile Strength at Break: 106 MPa
- Tensile Strength, Yield: 103 MPa
$ 2378/MT
- Density: 5.00 g/cc
- Tensile Strength at Break: 31.0 MPa
- Elongation at Break: 5.0 %
- Flexural Strength: 62.0 MPa
- Flexural Modulus: 2.17 GPa
$ 1897/MT
- Specific Gravity: 1.52 g/cc
- Water Absorption: 0.070 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 6.40 mm
- Tensile Strength, Yield: 97.0 MPa
Delivery Polyester SABIC Innovative Plastics (GE Plastics)
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):
Country | 20’ Container | 40’ Container | 5,000 MT |
🇦🇺 Australia | $3345 | $4181 | $401400 |
🇦🇹 Austria | $2825 | $3531 | $339000 |
🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
🇦🇱 Albania | $2500 | $3125 | $300000 |
🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
🇦🇴 Angola | $2762.5 | $3453 | $331500 |
🇦🇷 Argentina | $3230 | $4038 | $387600 |
🇦🇲 Armenia | $2625 | $3281 | $315000 |
🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
🇧🇭 Bahrain | $3095 | $3869 | $371400 |
🇧🇾 Belarus | $2825 | $3531 | $339000 |
🇧🇿 Belize | $3155 | $3944 | $378600 |
🇧🇪 Belgium | $2575 | $3219 | $309000 |
🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
🇧🇴 Bolivia | $3230 | $4038 | $387600 |
🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
🇧🇷 Brazil | $3120 | $3900 | $374400 |
🇭🇺 Hungary | $2575 | $3219 | $309000 |
🇻🇪 Venezuela | $3230 | $4038 | $387600 |
🇻🇳 Vietnam | $2625 | $3281 | $315000 |
🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
🇬🇹 Guatemala | $3230 | $4038 | $387600 |
🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
🇩🇪 Germany | $2475 | $3094 | $297000 |
🇭🇳 Honduras | $3230 | $4038 | $387600 |
🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
🇬🇷 Greece | $2575 | $3219 | $309000 |
🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
🇩🇰 Denmark | $2400 | $3000 | $288000 |
🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
🇮🇱 Israel | $2625 | $3281 | $315000 |
🇮🇳 India | $3712.5 | $4641 | $445500 |
🇮🇩 Indonesia | $3095 | $3869 | $371400 |
🇯🇴 Jordan | $2625 | $3281 | $315000 |
🇮🇶 Iraq | $2625 | $3281 | $315000 |
🇮🇷 Iran | $3095 | $3869 | $371400 |
🇮🇪 Ireland | $2500 | $3125 | $300000 |
🇮🇸 Iceland | $2575 | $3219 | $309000 |
🇪🇸 Spain | $2500 | $3125 | $300000 |
🇮🇹 Italy | $2400 | $3000 | $288000 |
🇾🇪 Yemen | $2625 | $3281 | $315000 |
🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
🇰🇭 Cambodia | $3095 | $3869 | $371400 |
🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
🇨🇦 Canada | $3230 | $4038 | $387600 |
🇶🇦 Qatar | $2625 | $3281 | $315000 |
🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
🇨🇾 Cyprus | $2625 | $3281 | $315000 |
🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
🇨🇳 China | $3712.5 | $4641 | $445500 |
🇨🇴 Colombia | $3230 | $4038 | $387600 |
🇰🇷 Korea South | $2625 | $3281 | $315000 |
🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
🇨🇺 Cuba | $3230 | $4038 | $387600 |
🇰🇼 Kuwait | $2625 | $3281 | $315000 |
🇱🇻 Latvia | $2575 | $3219 | $309000 |
🇱🇧 Lebanon | $2625 | $3281 | $315000 |
🇱🇾 Libya | $2762.5 | $3453 | $331500 |
🇱🇹 Lithuania | $2500 | $3125 | $300000 |
🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
🇲🇾 Malaysia | $2625 | $3281 | $315000 |
🇲🇹 Malta | $2500 | $3125 | $300000 |
🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
🇲🇽 Mexico | $3155 | $3944 | $378600 |
🇲🇩 Moldova | $2400 | $3000 | $288000 |
🇲🇨 Monaco | $2475 | $3094 | $297000 |
🇲🇳 Mongolia | $2625 | $3281 | $315000 |
🇲🇲 Myanmar | $2625 | $3281 | $315000 |
🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
🇳🇵 Nepal | $2625 | $3281 | $315000 |
🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
🇳🇱 Netherlands | $2575 | $3219 | $309000 |
🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
🇳🇿 New Zealand | $3345 | $4181 | $401400 |
🇳🇴 Norway | $2400 | $3000 | $288000 |
🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
🇴🇲 Oman | $2625 | $3281 | $315000 |
🇵🇰 Pakistan | $2625 | $3281 | $315000 |
🇵🇦 Panama | $3230 | $4038 | $387600 |
🇵🇾 Paraguay | $3155 | $3944 | $378600 |
🇵🇪 Peru | $3230 | $4038 | $387600 |
🇵🇱 Poland | $2575 | $3219 | $309000 |
🇵🇹 Portugal | $2500 | $3125 | $300000 |
🇷🇺 Russia | $2575 | $3219 | $309000 |
🇷🇴 Romania | $2475 | $3094 | $297000 |
🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
🇷🇸 Serbia | $2575 | $3219 | $309000 |
🇸🇬 Singapore | $3095 | $3869 | $371400 |
🇸🇾 Syria | $3095 | $3869 | $371400 |
🇸🇰 Slovakia | $2500 | $3125 | $300000 |
🇸🇮 Slovenia | $2500 | $3125 | $300000 |
🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
🇺🇸 United States | $2902.5 | $3628 | $348300 |
🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
🇹🇭 Thailand | $2625 | $3281 | $315000 |
🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
🇹🇷 Turkey | $2625 | $3281 | $315000 |
🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
🇺🇦 Ukraine | $2500 | $3125 | $300000 |
🇺🇾 Uruguay | $2675 | $3344 | $321000 |
🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
🇵🇭 Philippines | $2625 | $3281 | $315000 |
🇫🇮 Finland | $2500 | $3125 | $300000 |
🇫🇷 France | $2575 | $3219 | $309000 |
🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
🇲🇪 Montenegro | $2575 | $3219 | $309000 |
🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
🇨🇱 Chile | $3355 | $4194 | $402600 |
🇨🇭 Switzerland | $2575 | $3219 | $309000 |
🇸🇪 Sweden | $2500 | $3125 | $300000 |
🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
🇪🇨 Ecuador | $3155 | $3944 | $378600 |
🇦🇸 American Samoa | $3345 | $4181 | $401400 |
🇸🇻 El Salvador | $3230 | $4038 | $387600 |
🇪🇪 Estonia | $2575 | $3219 | $309000 |
🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
🇯🇵 Japan | $3095 | $3869 | $371400 |
🇦🇩 Andorra | $2500 | $3125 | $300000 |
🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
🇧🇧 Barbados | $3230 | $4038 | $387600 |
🇧🇹 Bhutan | $3095 | $3869 | $371400 |
🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
🇧🇳 Brunei | $2625 | $3281 | $315000 |
🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
🇹🇩 Chad | $2762.5 | $3453 | $331500 |
🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
🇧🇯 Benin | $2762.5 | $3453 | $331500 |
🇩🇲 Dominica | $3230 | $4038 | $387600 |
🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
🇫🇯 Fiji | $3345 | $4181 | $401400 |
🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
🇰🇮 Kiribati | $3345 | $4181 | $401400 |
🇬🇩 Grenada | $3355 | $4194 | $402600 |
🇬🇺 Guam | $3345 | $4181 | $401400 |
🇬🇾 Guyana | $3230 | $4038 | $387600 |
🇭🇹 Haiti | $3120 | $3900 | $374400 |
🇯🇲 Jamaica | $3230 | $4038 | $387600 |
🇰🇵 Korea, North | $2625 | $3281 | $315000 |
🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
🇲🇻 Maldives | $2625 | $3281 | $315000 |
🇲🇱 Mali | $2762.5 | $3453 | $331500 |
🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
🇨🇼 Curaçao | $3230 | $4038 | $387600 |
🇦🇼 Aruba | $3120 | $3900 | $374400 |
🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
🇳🇪 Niger | $2762.5 | $3453 | $331500 |
🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
🇸🇲 San Marino | $2500 | $3125 | $300000 |
🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
🇸🇷 Suriname | $3230 | $4038 | $387600 |
🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
🇹🇬 Togo | $2762.5 | $3453 | $331500 |
🇹🇴 Tonga | $3345 | $4181 | $401400 |
🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts,
lng tankers for sale romania. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.