$ 1672/MT
- Specific Gravity: 1.60 g/cc
- Density: 0.000945 g/cc
- Density: 1.65 g/cc
- Water Absorption: 0.0200 % @Temperature 22.8 °C
- Water Absorption at Saturation: 0.0200 %
$ 1656/MT
- Density: 1.40 g/cc
- Density of Compound: 1.165 g/cc
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0170 cm/cm
- Melt Flow: 12.0 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1716/MT
- Density: 1.12 g/cc
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 2.1 %
- Tensile Modulus: 6.065 GPa
- Flexural Strength: 142 MPa
$ 2133/MT
- Specific Gravity: 1.33 g/cc
- Density: 1.33 g/cc
- Tensile Strength at Break: 121 MPa
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 1.40 %
$ 1897/MT
- Density: 1.73 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage, Flow: 0.0010 cm/cm @Thickness 2.00 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 2.00 mm
- Tensile Strength at Break: 115 MPa
$ 1476/MT
- Solids Content: 63 %
- Viscosity: 200 - 1500 cP
- Glass Transition Temp, Tg: 37.0 °C
- Colloid: Dextrin
$ 2068/MT
- Density: 0.930 g/cc
- Vinyl Acetate Content: 18 %
- Melt Flow: 500 g/10 min @Load 0.325 kg, Temperature 125 °C
- Hardness, Shore A: 85
- Tensile Strength at Break: 4.00 MPa
$ 1778/MT
- Density: 2.00 g/cc
- Water Absorption: 0.020 %
- Linear Mold Shrinkage, Flow: 0.0015 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm
- Hardness, Rockwell M: 100
$ 1724/MT
- Density: 1.40 g/cc
- Linear Mold Shrinkage: 0.017 cm/cm
- Linear Mold Shrinkage, Transverse: 0.015 cm/cm
- Tensile Strength, Yield: 58.0 MPa
- Tensile Modulus: 2.45 GPa
$ 1534/MT
- Density: 1.57 g/cc
- Hardness, Rockwell M: 92.0
- Tensile Strength at Break: 100 MPa
- Elongation at Break: 2.00 %
- Tensile Modulus: 7.20 GPa
$ 1500/MT
- Density: 1.65 g/cc
- Water Absorption at Saturation: 0.020 %
- Linear Mold Shrinkage: 0.0020 - 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm
- Hardness, Rockwell M: 100
$ 1462/MT
- Specific Gravity: 1.23 g/cc
- Density: 1.216 g/cc
- Water Absorption: 0.100 % @Temperature 22.8 °C
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0180 cm/cm
$ 1571/MT
- Specific Gravity: 1.19 g/cc
- Density: 0.000689 g/cc
- Density: 1.19 g/cc
- Density of Compound: 1.19 g/cc
- Water Absorption: 0.400 % @Temperature 22.8 °C
$ 1815/MT
- Density: 1.40 g/cc
- Moisture Absorption at Equilibrium: 0.040 %
- Moisture Vapor Transmission: 0.0157 cc-mm/m²-24hr-atm
- Oxygen Transmission: 0.0394 cc-mm/m²-24hr-atm
- Oxygen Transmission: 0.0472 cc-mm/m²-24hr-atm
$ 2284/MT
- Density: 1.17 g/cc
- Water Absorption: 0.50 %
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 10 g/10 min
- Hardness, Shore D: 47
$ 1651/MT
- Density: 1.37 g/cc
- Water Absorption at Saturation: 0.800 %
- Linear Mold Shrinkage, Flow: 0.0160 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0150 cm/cm
- Melt Flow: 4.00 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1496/MT
- Density: 1.36 g/cc
- Melt Flow: 17.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Break: 40.0 %
- Elongation at Yield: 8.50 %
$ 1660/MT
- Density: 1.39 g/cc
- Water Absorption at Saturation: 0.800 %
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 6.50 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 2092/MT
- Density: 1.37 g/cc
- Water Absorption at Saturation: 0.800 %
- Linear Mold Shrinkage, Flow: 0.0160 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0150 cm/cm
- Melt Flow: 4.00 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1605/MT
- Density: 1.36 g/cc
- Water Absorption at Saturation: 0.650 %
- Melt Flow: 4.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 41.0 MPa
- Elongation at Yield: 13.0 %
$ 1958/MT
- Solids Content: 50 %
- pH: 4.0
- Viscosity: 200 cP
- Glass Transition Temp, Tg: 5.00 °C
- FDA: Yes
$ 1664/MT
- Solids Content: 50 %
- pH: 4.0
- Viscosity: 200 cP
- Glass Transition Temp, Tg: 5.00 °C
- FDA: Yes
$ 1554/MT
- Density: 1.60 g/cc
- Water Absorption: 0.020 %
- Linear Mold Shrinkage, Flow: 0.0025 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Hardness, Rockwell M: 100
$ 2140/MT
- Density: 1.74 g/cc
- Moisture Absorption: 0.00500 %
- Water Absorption at Saturation: 0.00800 %
- Linear Mold Shrinkage, Flow: 0.000 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00500 cm/cm
$ 1627/MT
- Solids Content: 55 %
- Particle Size: 200 µm
- pH: 5.0
- Viscosity: <= 850 cP
- Glass Transition Temp, Tg: 15.0 °C
$ 2578/MT
- Vinyl Acetate Content: 28 %
- Melt Flow: 28 g/10 min
$ 2145/MT
- Density: 1.43 g/cc
- Density: 1.50 g/cc
- Linear Mold Shrinkage: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Tensile Strength, Yield: 48.0 MPa
$ 1843/MT
- Specific Gravity: 1.40 g/cc
- Density: 0.000809 g/cc
- Density: 1.35 g/cc
- Water Absorption: 0.0300 % @Temperature 22.8 °C
- Water Absorption at Saturation: 0.0200 %
$ 1909/MT
- Density: 1.61 g/cc
- Water Absorption: 0.040 %
- Moisture Absorption at Equilibrium: 0.040 %
- Linear Mold Shrinkage: 0.0010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0020 cm/cm
$ 1598/MT
- Density: 1.80 g/cc
- Water Absorption: 0.10 %
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Tensile Strength, Ultimate: 36.0 MPa
- Elongation at Break: 0.15 %
$ 1478/MT
- Density: 1.10 g/cc
- Linear Mold Shrinkage, Flow: 0.0130 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0100 cm/cm
- Melt Flow: 9.00 g/10 min @Load 2.16 kg, Temperature 220 °C
- Hardness, Shore A: 91.0
$ 1794/MT
- Density: 1.57 g/cc
- Viscosity Test: 136 cm³/g
- Tensile Strength at Break: 220 MPa
- Tensile Strength: 140 MPa @Temperature 80.0 °C
- Elongation at Break: 1.60 %
$ 2264/MT
- Density: 1.633 g/cc
- Tensile Strength at Break: 170 MPa
- Elongation at Break: 1.90 %
- Tensile Modulus: 13.9 GPa
- Flexural Strength: 240 MPa
$ 1678/MT
- Density: 1.12 g/cc
- Tensile Strength at Break: 94.0 MPa
- Elongation at Break: 2.50 %
- Tensile Modulus: 6.219 GPa
- Flexural Strength: 158 MPa
$ 1536/MT
- Density: 1.25 g/cc
- Linear Mold Shrinkage, Flow: 0.0170 - 0.0220 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0170 - 0.0220 cm/cm
- Tensile Strength at Break: 34.5 MPa
- Tensile Strength, Yield: 40.0 MPa
$ 2065/MT
- Density: 1.41 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.750 %
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 63.0 MPa
$ 1671/MT
- Density: 1.14 g/cc
- Water Absorption: 0.60 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 6.0 g/10 min
- Hardness, Shore D: 35
$ 2578/MT
- Specific Gravity: 1.33 g/cc
- Density: 1.33 g/cc
- Tensile Strength at Break: 110 MPa
- Tensile Strength at Break: 121 MPa
- Elongation at Break: 1.7 %
$ 2070/MT
- Density: 1.43 g/cc
- Water Absorption: 0.20 %
- Moisture Absorption at Equilibrium: 0.80 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.014 cm/cm
$ 1642/MT
- Density: 1.07 g/cc
- Solids Content: >= 50 %
- pH: 4.5
- Viscosity: 1000 cP
- Glass Transition Temp, Tg: -5.00 °C
$ 1543/MT
- Linear Mold Shrinkage, Flow: 0.00200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00900 cm/cm
- Tensile Strength at Break: 175 MPa
- Elongation at Break: 3.00 %
- Tensile Modulus: 11.5 GPa
$ 1874/MT
- Density: 1.22 g/cc
- Tensile Strength at Break: 125 MPa
- Tensile Strength: 80.0 MPa @Temperature 80.0 °C
- Elongation at Break: 1.80 %
- Elongation at Break: 2.00 % @Temperature 80.0 °C
$ 1981/MT
- Density: 1.42 g/cc
- Melt Flow: 17.04 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 62.0 MPa
- Elongation at Break: 30 %
- Elongation at Yield: 11 %
$ 1786/MT
- Vinyl Acetate Content: 16.3 %
- Melt Flow: 8.4 g/10 min
$ 1583/MT
- Density: 0.913 g/cc
- Melt Flow: 160 g/10 min
- Melt Flow: 160 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 95
- Tensile Strength at Break: 7.00 MPa
$ 1520/MT
- Specific Gravity: 1.40 g/cc
- Density: 1.35 g/cc
- Water Absorption: 0.0100 % @Temperature 22.8 °C
- Water Absorption at Saturation: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.0100 - 0.0120 cm/cm
$ 2050/MT
- Density: 1.41 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.750 %
- Linear Mold Shrinkage, Flow: 0.0220 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
$ 1544/MT
- Density: 1.45 g/cc
- Moisture Absorption: 0.200 %
- Viscosity Test: 82.0 cm³/g
- Melt Flow: 20.0 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 50.0 MPa
$ 1713/MT
- Specific Gravity: 1.62 g/cc
- Linear Mold Shrinkage, Flow: 0.00200 - 0.00300 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 - 0.00500 cm/cm
- Tensile Strength at Break: 155 MPa
- Tensile Strength at Break: 176 MPa
$ 1463/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.650 %
- Melt Flow: 0.900 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 65.0 MPa
- Elongation at Break: 25.0 %
$ 1682/MT
- Specific Gravity: 1.56 g/cc
- Density: 1.56 g/cc
- Linear Mold Shrinkage, Flow: 0.00100 - 0.00150 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00150 - 0.00250 cm/cm
- Tensile Strength at Break: 265 MPa
$ 1490/MT
- Density: 1.44 g/cc
- Water Absorption at Saturation: 0.0200 %
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 2.00 %
- Tensile Modulus: 7.70 GPa
$ 1628/MT
- Density: 1.43 g/cc
- Water Absorption at Saturation: 0.75 %
- Linear Mold Shrinkage, Flow: 0.023 cm/cm
- Linear Mold Shrinkage, Transverse: 0.014 cm/cm
- Tensile Strength, Yield: 54.0 MPa
$ 1836/MT
- Density: 1.62 g/cc
- Linear Mold Shrinkage, Flow: 0.0025 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
- Tensile Strength at Break: 125 MPa
- Elongation at Break: 1.5 %
$ 2087/MT
- Density: 1.44 g/cc
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00600 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0140 - 0.0160 cm/cm
- Hardness, Rockwell M: 62.0
- Tensile Strength at Break: 100 MPa
$ 1933/MT
- Density: 1.41 g/cc
- Moisture Absorption at Equilibrium: 0.20 % @Temperature 23.0 °C
- Water Absorption at Saturation: 0.65 % @Temperature 23.0 °C
- Melt Flow: 16.92 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 143 MPa
$ 1853/MT
- Density: 1.60 g/cc
- Tensile Strength at Break: 160 MPa
- Elongation at Break: 2.6 %
- Tensile Modulus: 9.50 GPa
- Flexural Modulus: 9.50 GPa
$ 2172/MT
- Density: 1.07 g/cc
- Solids Content: >= 47 %
- pH: 6.0
- Viscosity: 100 cP
- Glass Transition Temp, Tg: 30.0 °C
$ 1587/MT
- Density: 1.72 g/cc
- Water Absorption at Saturation: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.000500 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00380 cm/cm
- Hardness, Rockwell M: 44.0
$ 1578/MT
- Density: 1.89 g/cc
- Water Absorption: 0.020 %
- Moisture Absorption at Equilibrium: 0.020 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm
$ 1868/MT
- Density: 1.43 g/cc
- Water Absorption at Saturation: 0.750 %
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 56.0 MPa
- Elongation at Yield: 10.0 %
$ 1766/MT
- Density: 1.46 g/cc
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
- Hardness, Rockwell M: 155
- Tensile Strength at Break: 58.0 MPa
- Elongation at Break: 8.00 %
$ 1787/MT
- Density: 1.22 g/cc
- Tensile Strength at Break: 135 MPa
- Tensile Strength: 76.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.00 %
- Elongation at Break: 2.30 % @Temperature 80.0 °C
$ 1447/MT
- Density: 1.44 g/cc
- Tensile Strength at Break: 151 MPa
- Elongation at Break: 2.4 %
- Flexural Modulus: 11.78 GPa
- Izod Impact, Notched (ISO): 6.50 kJ/m²
$ 1538/MT
- Density: 1.43 g/cc
- Density of Compound: 1.22 g/cc
- Moisture Absorption: 0.150 %
- Viscosity Test: 76.0 cm³/g
- Melt Flow: 21.0 g/10 min @Load 2.16 kg, Temperature 265 °C
$ 1487/MT
- Solids Content: 50 %
- pH: 4.0
- Viscosity: 500 cP
- Glass Transition Temp, Tg: -10.0 °C
- FDA: Yes
$ 1469/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.26 g/cc
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
- Linear Mold Shrinkage, Flow: 0.0220 - 0.0330 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0220 - 0.0330 cm/cm
$ 1518/MT
- Specific Gravity: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
- Hardness, Rockwell M: 78.0
- Tensile Strength at Break: 55.8 MPa
- Tensile Strength, Yield: 57.2 MPa
$ 1711/MT
- Density: 1.65 g/cc
- Linear Mold Shrinkage, Flow: 0.000500 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00430 cm/cm
- Tensile Strength at Break: 110 MPa
- Elongation at Break: 2.00 %
$ 1545/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Water Absorption: 0.0800 % @Temperature 22.8 °C
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
$ 1601/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Water Absorption: 0.0800 % @Temperature 22.8 °C
- Moisture Absorption: 0.190 %
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
$ 2423/MT
- Density: 1.45 g/cc
- Linear Mold Shrinkage: 0.0010 - 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0020 - 0.0030 cm/cm
- Tensile Strength at Break: 215 MPa
- Tensile Strength at Break: 253 MPa
$ 1915/MT
- Density: 1.66 g/cc
- Linear Mold Shrinkage, Flow: 0.00120 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00600 cm/cm
- Tensile Strength at Break: 145 MPa
- Elongation at Break: 2.00 %
$ 2278/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.53 g/cc
- Water Absorption: 0.0700 % @Temperature 22.8 °C
- Moisture Absorption: 0.200 %
- Viscosity Test: 74.0 cm³/g
$ 1630/MT
- Density: 1.03 g/cc
- Tensile Strength at Break: 88.0 MPa
- Tensile Strength: 54.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.50 %
- Elongation at Break: 2.50 % @Temperature 80.0 °C
$ 1510/MT
- Density: 1.57 g/cc
- Linear Mold Shrinkage, Flow: 0.00300 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00900 cm/cm
- Tensile Strength at Break: 65.0 MPa
- Elongation at Break: 2.00 %
$ 1567/MT
- Density: 1.48 g/cc
- Water Absorption at Saturation: 0.850 %
- Melt Flow: 6.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: 90.0 MPa
- Elongation at Break: 4.00 %
$ 1671/MT
- Density: 1.03 g/cc
- Tensile Strength at Break: 90.0 MPa
- Tensile Strength: 60.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.40 %
- Elongation at Break: 2.40 % @Temperature 80.0 °C
$ 1763/MT
- Density: 1.77 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 2.00 mm
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm @Thickness 2.00 mm
- Tensile Strength at Break: 120 MPa
$ 2382/MT
- Density: 1.41 g/cc
- Density of Compound: 1.20 g/cc
- Water Absorption at Saturation: 0.650 %
- Melt Flow: 2.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 62.0 MPa
$ 2159/MT
- Density: 1.42 g/cc
- Melt Flow: 7.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 52.0 MPa
- Elongation at Break: 16.0 %
- Elongation at Yield: 7.00 %
$ 1991/MT
- Density: 1.54 g/cc
- Tensile Strength at Break: 168 MPa
- Elongation at Break: 2.12 %
- Tensile Modulus: 11.12 GPa
- Flexural Strength: 246 MPa
$ 1734/MT
- Density: 0.922 g/cc
- Thickness: 35.0 microns
- Melt Flow: 0.80 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 13.0 MPa
- Film Tensile Strength at Yield, TD: 13.0 MPa
$ 1631/MT
- Density: 1.34 g/cc
- Tensile Strength at Break: 145 MPa
- Tensile Strength: 75.0 MPa @Temperature 80.0 °C
- Elongation at Break: 1.8 %
- Elongation at Break: 2.2 % @Temperature 80.0 °C
$ 1479/MT
- Density: 1.41 g/cc
- Density of Compound: 1.20 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
$ 1452/MT
- Specific Gravity: 1.40 g/cc
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0220 cm/cm
- Linear Mold Shrinkage, Flow: 0.0230 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
$ 1548/MT
- Density: 1.67 g/cc
- Viscosity Test: 120 cm³/g
- Tensile Strength at Break: 260 MPa
- Tensile Strength: 165 MPa @Temperature 80.0 °C
- Elongation at Break: 1.80 %
$ 1995/MT
- Density: 1.43 g/cc
- Linear Mold Shrinkage, Flow: 0.00100 - 0.00300 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00500 - 0.00700 cm/cm
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 2.00 %
$ 1879/MT
- Density: 1.56 g/cc
- Filler Content: 40 %
- Tensile Strength at Break: 134 MPa
- Elongation at Break: 1.7 %
- Tensile Modulus: 12.5 GPa @Temperature 23.0 °C
$ 1539/MT
- Density: 1.67 g/cc
- Water Absorption: 0.020 %
- Moisture Absorption at Equilibrium: 0.020 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm
$ 1846/MT
- Tensile Strength: 135 MPa @Temperature 80.0 °C
- Elongation at Break: 2.50 % @Temperature 80.0 °C
- Tensile Modulus: 7.80 GPa @Temperature 80.0 °C
- Flexural Strength: 300 MPa
- Flexural Strength: 215 MPa @Temperature 80.0 °C
$ 1560/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Water Absorption: 0.0800 % @Temperature 22.8 °C
- Moisture Absorption: 0.200 %
- Viscosity Test: 130 cm³/g
$ 1770/MT
- Density: 1.56 g/cc
- Linear Mold Shrinkage, Flow: 0.00300 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00800 cm/cm
- Hardness, Rockwell M: 44.0
- Tensile Strength at Break: 92.0 MPa
$ 1631/MT
- Density: 1.41 g/cc
- Water Absorption: 0.22 %
- Moisture Absorption at Equilibrium: 0.80 %
- Linear Mold Shrinkage: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
$ 1725/MT
- Specific Gravity: 1.70 g/cc
- Density: 1.69 g/cc
- Water Absorption: 0.0200 % @Temperature 22.8 °C
- Water Absorption at Saturation: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.00200 cm/cm
$ 1780/MT
- Density: 1.55 g/cc
- Density of Compound: 1.32 g/cc
- Moisture Absorption: 0.150 %
- Viscosity Test: 78.0 cm³/g
- Melt Flow: 9.00 g/10 min @Load 2.16 kg, Temperature 250 °C
$ 1622/MT
- Density: 1.08 g/cc
- Solids Content: >= 55 %
- pH: 4.5
- Viscosity: 2300 cP
- Glass Transition Temp, Tg: 11.0 °C
$ 2013/MT
- Density: 1.56 g/cc
- Tensile Strength at Break: 260 MPa
- Elongation at Break: 2.20 %
- Tensile Modulus: 16.4 GPa
- Flexural Strength: 425 MPa
$ 1597/MT
- Density: 1.46 g/cc
- Tensile Strength at Break: 93.0 MPa
- Elongation at Break: 6.0 %
- Izod Impact, Notched (ISO): 4.40 kJ/m²
- Deflection Temperature at 1.8 MPa (264 psi): 110 °C
$ 1802/MT
- Density: 1.71 g/cc
- Linear Mold Shrinkage, Flow: 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 cm/cm
- Tensile Strength at Break: 131 MPa
- Elongation at Break: 1.66 %
$ 1980/MT
- Solids Content: 50 %
- Viscosity: 50 - 300 cP
- Glass Transition Temp, Tg: -45.0 °C
- Colloid: Surfactant
$ 1473/MT
- Solids Content: 50 %
- Viscosity: 800 - 1500 cP
- Glass Transition Temp, Tg: -50.0 °C
- Colloid: Surfactant
$ 1717/MT
- Density: 1.70 g/cc
- Linear Mold Shrinkage: 0.0010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
- Hardness, Rockwell M: 77
- Tensile Strength at Break: 160 MPa
$ 1579/MT
- Solids Content: 55 %
- Particle Size: 200 µm
- pH: 5.0
- Viscosity: <= 850 cP
- Glass Transition Temp, Tg: 19.0 °C
$ 1496/MT
- Density: 1.77 g/cc
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 1.70 %
- Elongation at Break: 1.90 %
- Tensile Modulus: 13.0 GPa
$ 1671/MT
- Density: 1.11 g/cc
- Linear Mold Shrinkage, Flow: 0.0120 - 0.0140 cm/cm
- Melt Flow: 13.3 g/10 min @Load 2.16 kg, Temperature 220 °C
- Hardness, Shore A: 92.0
- Hardness, Shore D: 38.0
$ 1796/MT
- Specific Gravity: 1.80 g/cc
- Density: 0.00104 g/cc
- Density: 1.80 g/cc
- Water Absorption: 0.0300 % @Temperature 22.8 °C
- Water Absorption at Saturation: 0.0200 %
$ 2013/MT
- Specific Gravity: 1.52 g/cc
- Density: 1.52 g/cc
- Linear Mold Shrinkage, Flow: 0.000500 - 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00100 - 0.00200 cm/cm
- Tensile Strength at Break: 210 MPa
$ 1457/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Water Absorption: 0.0800 % @Temperature 22.8 °C
- Moisture Absorption: 0.200 %
- Viscosity Test: 130 cm³/g
$ 1468/MT
- Density: 1.21 g/cc
- Tensile Strength at Break: 125 MPa
- Elongation at Break: 2.00 %
- Tensile Modulus: 8.70 GPa
- Flexural Strength: 190 MPa
$ 1664/MT
- Density: 2.03 g/cc
- Water Absorption at Saturation: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.00200 - 0.00600 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00300 - 0.00700 cm/cm
- Hardness, Rockwell M: 100
$ 1539/MT
- Density: 1.74 g/cc
- Filler Content: 45 %
- Linear Mold Shrinkage, Flow: 0.00050 cm/cm @Thickness 2.00 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 2.00 mm
- Tensile Strength at Break: 20.0 MPa @Thickness 4.00 mm, Temperature 250 °C
$ 1476/MT
- Specific Gravity: 1.60 g/cc
- Density: 1.59 g/cc
- Moisture Absorption: 0.130 %
- Linear Mold Shrinkage, Flow: 0.00200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00600 cm/cm
$ 1844/MT
- Density: 1.61 g/cc
- Tensile Strength at Break: 180 MPa
- Elongation at Break: 1.85 %
- Tensile Modulus: 13.6 GPa
- Flexural Strength: 270 MPa
$ 1784/MT
- Density: 0.932 g/cc
- Vinyl Acetate Content: 12 %
- Thickness: 75.0 microns
- Melt Flow: 0.80 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 7.00 MPa
$ 2406/MT
- Density: 1.41 g/cc
- Moisture Absorption at Equilibrium: 0.20 % @Temperature 23.0 °C
- Water Absorption at Saturation: 0.65 % @Temperature 23.0 °C
- Melt Flow: 3.1 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 144 MPa
$ 2273/MT
- Density: 1.67 g/cc
- Linear Mold Shrinkage, Flow: 0.00300 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00600 cm/cm
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 1.00 %
$ 1457/MT
- Solids Content: 62 %
- pH: 4.5
- Viscosity: 1300 cP
- Glass Transition Temp, Tg: 0.000 °C
- FDA: Yes
$ 2059/MT
- Density: 1.54 g/cc
- Tensile Strength at Break: 155 MPa
- Elongation at Break: 0.400 %
- Tensile Modulus: 41.747 GPa
- Flexural Strength: 343 MPa
$ 1830/MT
- Specific Gravity: 1.22 g/cc
- Density: 1.22 g/cc
- Linear Mold Shrinkage, Flow: 0.00300 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00500 cm/cm
- Tensile Strength at Break: 119 MPa
$ 1456/MT
- Density: 1.34 g/cc
- Water Absorption at Saturation: 0.800 %
- Melt Flow: 1.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 44.0 MPa
- Elongation at Break: 15.0 %
$ 2212/MT
- Specific Gravity: 1.58 g/cc
- Density: 1.58 g/cc
- Moisture Absorption: 0.160 %
- Linear Mold Shrinkage, Flow: 0.00200 cm/cm
- Linear Mold Shrinkage, Flow: 0.00700 cm/cm
$ 1994/MT
- Density: 0.937 g/cc
- Vinyl Acetate Content: 18 %
- Melt Flow: 150 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 86
- Hardness, Shore D: 37
$ 2524/MT
- Density: 1.72 g/cc
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 1.80 %
- Tensile Modulus: 14.6 GPa
- Deflection Temperature at 1.8 MPa (264 psi): 201 °C
$ 1973/MT
- Density: 1.31 g/cc
- Water Absorption: 0.080 %
- Linear Mold Shrinkage, Flow: 0.019 cm/cm
- Hardness, Rockwell M: 72
- Tensile Strength, Yield: 60.0 MPa
$ 1741/MT
- Density: 1.40 g/cc
- Moisture Absorption: 0.0300 %
- Linear Mold Shrinkage, Flow: 0.000 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00700 cm/cm
- Tensile Strength at Break: 182 MPa
$ 2343/MT
- Density: 1.12 g/cc
- Tensile Strength at Break: 103 MPa
- Elongation at Break: 2.30 %
- Tensile Modulus: 6.30 GPa
- Flexural Strength: 150 MPa
$ 1579/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.54 g/cc
- Linear Mold Shrinkage, Flow: 0.00200 - 0.00500 cm/cm
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0140 - 0.0210 cm/cm
$ 2160/MT
- Density: 1.62 g/cc
- Tensile Strength at Break: 175 MPa
- Flexural Modulus: 10.5 GPa
- Izod Impact, Notched (ISO): 23.0 kJ/m²
- Melting Point: 280 °C
$ 1612/MT
- Specific Gravity: 1.40 g/cc
- Density: 1.35 g/cc
- Water Absorption at Saturation: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.100 - 0.120 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0800 - 0.100 cm/cm
$ 1910/MT
- Specific Gravity: 0.950 g/cc
- Density: 0.950 g/cc
- Density of Compound: 0.950 g/cc
- Moisture Absorption: <= 0.0100 %
- Water Absorption at Saturation: <= 0.0100 %
$ 1515/MT
- Density: 1.57 g/cc
- Linear Mold Shrinkage, Flow: 0.00400 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00900 cm/cm
- Tensile Strength at Break: 100 MPa
- Elongation at Break: 1.80 %
$ 2434/MT
- Density: 1.62 g/cc
- Linear Mold Shrinkage, Flow: 0.0015 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 2.0 %
$ 1792/MT
- Density: 1.60 g/cc
- Density of Compound: 1.35 g/cc
- Water Absorption at Saturation: 0.900 %
- Melt Flow: 4.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: 135 MPa
$ 1529/MT
- Density: 1.60 g/cc
- Tensile Strength at Break: 205 MPa
- Flexural Modulus: 20.0 GPa
- Izod Impact, Notched (ISO): 14.0 kJ/m²
- Melting Point: 280 °C
- Deflection Temperature at 1.8 MPa (264 psi): 235 °C
$ 1601/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 8.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 63.0 MPa
$ 1729/MT
- Density: 1.40 g/cc
- Linear Mold Shrinkage, Flow: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 - 0.012 cm/cm
- Hardness, Rockwell M: 81
- Tensile Strength at Break: 70.0 MPa
$ 2368/MT
- Solids Content: 55 %
- Particle Size: 285 µm
- pH: 5.0
- Viscosity: 500 - 1500 cP
- Glass Transition Temp, Tg: 20.0 °C
$ 2365/MT
- Density: 0.952 g/cc
- Vinyl Acetate Content: 33 %
- Melt Flow: 43 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 68
- Tensile Strength at Break: 9.00 MPa
$ 2529/MT
- Density: 1.45 g/cc
- Density of Compound: 1.42 g/cc
- Viscosity Test: 85.0 cm³/g
- Linear Mold Shrinkage, Flow: 0.00200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00800 cm/cm
$ 2145/MT
- Density: 1.65 g/cc
- Tensile Strength at Break: 100 MPa
- Elongation at Break: 1.20 %
- Tensile Modulus: 10.0 GPa
- Flexural Strength: 150 MPa
$ 2329/MT
- Density: 1.45 g/cc
- Linear Mold Shrinkage, Flow: 0.00280 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00520 cm/cm
- Tensile Strength at Break: 110 MPa
- Elongation at Break: 1.80 %
$ 2228/MT
- Density: 1.63 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 0.900 %
- Linear Mold Shrinkage, Flow: 0.00300 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00800 cm/cm
$ 1480/MT
- Density: 1.55 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Water Absorption at Saturation: 1.1 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
$ 1455/MT
- Vinyl Acetate Content: 19 %
- Melt Flow: 30 g/10 min
$ 1603/MT
- Specific Gravity: 0.930 g/cc
- Density: 0.930 g/cc
- Density of Compound: 0.930 g/cc
- Moisture Absorption: <= 0.0100 %
- Water Absorption at Saturation: <= 0.0100 %
$ 1678/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage, Flow: 0.00120 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00230 cm/cm
- Tensile Strength at Break: 105 MPa
- Tensile Strength: 60.0 MPa @Temperature 80.0 °C
$ 1759/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.750 %
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 64.0 MPa
- Elongation at Yield: 9.00 %
$ 1631/MT
- Density: 1.45 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0010 cm/cm
- Tensile Strength at Break: 82.0 MPa
$ 2014/MT
- Density: 0.937 g/cc
- Vinyl Acetate Content: 18 %
- Melt Flow: 150 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 86
- Hardness, Shore D: 37
$ 2440/MT
- Density: 1.43 g/cc
- Water Absorption at Saturation: 0.750 %
- Linear Mold Shrinkage, Flow: 0.0230 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0140 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1532/MT
- Density: 1.52 g/cc
- Water Absorption at Saturation: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0170 cm/cm
- Melt Flow: 6.00 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 2318/MT
- Density: 1.07 g/cc
- Solids Content: >= 54 %
- pH: 5.5
- Viscosity: 500 cP
- Glass Transition Temp, Tg: -5.00 °C
$ 1964/MT
- Density: 1.80 g/cc
- Water Absorption: 0.020 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
- Hardness, Rockwell M: 100
$ 1765/MT
- Specific Gravity: 1.46 g/cc
- Density: 1.45 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage, Flow: 0.0025 cm/cm @Thickness 2.00 mm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm @Thickness 2.00 mm
$ 2483/MT
- Density: 1.42 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.65 %
- Melt Flow: 25.8 g/10 min
- Tensile Strength, Yield: 53.0 MPa
$ 1450/MT
- Density: 1.62 g/cc
- Tensile Strength at Break: 160 MPa
- Flexural Modulus: 14.0 GPa
- Izod Impact, Notched (ISO): 20.0 kJ/m²
- Melting Point: 325 °C
- Deflection Temperature at 1.8 MPa (264 psi): 255 °C
$ 1494/MT
- Density: 1.59 g/cc
- Water Absorption at Saturation: 0.900 %
- Melt Flow: 16.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 38.0 MPa
- Elongation at Break: 12.0 %
$ 1750/MT
- Density: 1.57 g/cc
- Melt Flow: 4.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: 100 MPa
- Elongation at Break: 2.50 %
- Tensile Modulus: 7.70 GPa
$ 2043/MT
- Density: 1.59 g/cc
- Density of Compound: 1.37 g/cc
- Water Absorption at Saturation: 0.900 %
- Melt Flow: 7.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 38.0 MPa
$ 1972/MT
- Density: 1.56 g/cc
- Water Absorption: 1.2 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Tensile Strength, Ultimate: 44.0 MPa
$ 2438/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0250 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0230 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 65.0 MPa
$ 1942/MT
- Density: 0.938 g/cc
- Vinyl Acetate Content: 18 %
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 90
- Tensile Strength at Break: 15.0 MPa
$ 2147/MT
- Density: 1.41 g/cc
- Density of Compound: 1.20 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
$ 1796/MT
- Density: 1.40 g/cc
- Tensile Strength, Yield: 41.0 MPa
- Tensile Modulus: 3.03 GPa
- Flexural Modulus: 2.82 GPa
- Izod Impact, Notched (ISO): 2.50 kJ/m²
$ 2474/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Water Absorption: 0.110 % @Temperature 22.8 °C
- Moisture Absorption: 0.200 %
- Viscosity Test: 115 cm³/g
$ 1720/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 12.0 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1487/MT
- Density: 1.48 g/cc
- Melt Flow: 8.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 58.0 MPa
- Elongation at Yield: 9.50 %
- Tensile Modulus: 2.80 GPa
$ 1480/MT
- Density: 1.77 g/cc
- Water Absorption at Saturation: 0.00500 %
- Linear Mold Shrinkage, Flow: 0.00140 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00430 cm/cm
- Hardness, Rockwell M: 54.0
$ 1715/MT
- Density: 1.46 g/cc
- Viscosity Test: 140 cm³/g
- Tensile Strength at Break: 180 MPa
- Tensile Strength: 130 MPa @Temperature 80.0 °C
- Elongation at Break: 1.50 %
$ 1817/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Tensile Strength, Yield: 66.0 MPa
- Flexural Modulus: 2.75 GPa
$ 1590/MT
- Water Absorption: 0.0200 % @Temperature 22.8 °C
- Tensile Strength at Break: 160 MPa
- Elongation at Break: 2.00 %
- Tensile Modulus: 11.0 GPa
- Flexural Strength: 255 MPa
$ 1732/MT
- Density: 0.937 g/cc
- Vinyl Acetate Content: 18 %
- Melt Flow: 150 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 86
- Hardness, Shore D: 37
$ 1484/MT
- Specific Gravity: 1.66 g/cc
- Density: 1.66 g/cc
- Moisture Absorption: 0.160 %
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
- Linear Mold Shrinkage, Flow: 0.00100 - 0.00800 cm/cm
$ 1624/MT
- Density: 1.65 g/cc
- Water Absorption at Saturation: 0.020 %
- Linear Mold Shrinkage: 0.0020 - 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm
- Hardness, Rockwell M: 100
$ 1526/MT
- Specific Gravity: 1.48 g/cc
- Density: 1.48 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.750 %
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
$ 2342/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Moisture Absorption: 0.170 %
- Linear Mold Shrinkage, Flow: 0.00100 - 0.00700 cm/cm
- Linear Mold Shrinkage, Flow: 0.00500 - 0.00700 cm/cm
$ 2288/MT
- Density: 1.56 g/cc
- Tensile Strength at Break: 200 MPa
- Elongation at Break: 1.5 %
- Tensile Modulus: 17.0 GPa
- Flexural Strength: 300 MPa
$ 1556/MT
- Specific Gravity: 1.63 g/cc
- Density: 1.63 g/cc
- Linear Mold Shrinkage, Flow: 0.000500 - 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.000500 - 0.00100 cm/cm
- Tensile Strength at Break: 230 MPa
$ 1522/MT
- Density: 0.917 g/cc
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 94
- Hardness, Shore D: 47
- Tensile Strength at Break: 7.00 MPa
$ 1625/MT
- Density: 1.41 g/cc
- Density of Compound: 1.20 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
$ 1563/MT
- Density: 1.51 g/cc
- Water Absorption at Saturation: 0.65 %
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.017 cm/cm
- Tensile Strength, Yield: 47.0 MPa
$ 1480/MT
- Density: 1.67 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Hardness, Rockwell M: 96
- Tensile Strength at Break: 145 MPa
$ 2119/MT
- Density: 1.33 g/cc
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.019 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Tensile Strength, Yield: 44.0 MPa
$ 1949/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0170 cm/cm
- Linear Mold Shrinkage, Flow: 0.0220 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0160 cm/cm
$ 1579/MT
- Specific Gravity: 0.820 g/cc
- Density: 0.00126 g/cc
- Particle Size: 0.00010 - 0.0010 µm
- Particle Mesh Size: 200 Mesh
- Molecular Weight: 30.03 g/mol
$ 1772/MT
- Density: 1.61 g/cc
- Water Absorption: 0.040 %
- Moisture Absorption at Equilibrium: 0.040 %
- Linear Mold Shrinkage: 0.0010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0020 cm/cm
$ 1634/MT
- Density: 1.12 g/cc
- Tensile Strength at Break: 100 MPa
- Tensile Strength: 63.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.50 %
- Elongation at Break: 3.30 % @Temperature 80.0 °C
$ 1516/MT
- Density: 1.41 g/cc
- Density of Compound: 1.20 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
$ 1584/MT
- Specific Gravity: 1.76 g/cc
- Density: 1.77 g/cc
- Filler Content: 45 %
- Tensile Strength at Break: 115 MPa
- Tensile Strength, Ultimate: 130 MPa @Temperature 23.0 °C
$ 1830/MT
- Density: 1.07 g/cc
- Solids Content: >= 55 %
- pH: 4.5
- Viscosity: 2400 cP
- Glass Transition Temp, Tg: 0.000 °C
$ 2105/MT
- Specific Gravity: 1.40 g/cc
- Density: 1.35 g/cc
- Water Absorption at Saturation: 0.020 %
- Linear Mold Shrinkage, Flow: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage, Flow: 0.012 - 0.018 cm/cm
$ 1548/MT
- Density: 1.74 g/cc
- Tensile Strength at Break: 3.00 MPa
- Tensile Strength at Break: 110 MPa
- Tensile Modulus: 10.7 GPa
- Flexural Strength: 130 MPa
$ 1698/MT
- Density: 1.43 g/cc
- Water Absorption: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0025 cm/cm
- Hardness, Rockwell M: 84
- Tensile Strength, Ultimate: 115 MPa
$ 1952/MT
- Density: 1.90 g/cc
- Water Absorption at Saturation: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.00200 - 0.00600 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00300 - 0.00700 cm/cm
- Hardness, Rockwell M: 100
$ 1630/MT
- Density: 1.40 g/cc
- Tensile Strength, Yield: 64.0 MPa
- Tensile Modulus: 2.445 GPa
- Flexural Modulus: 2.402 GPa
- Izod Impact, Notched (ISO): 7.70 kJ/m²
$ 1855/MT
- Density: 0.948 g/cc
- Vinyl Acetate Content: 28 %
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 80
- Tensile Strength at Break: 11.0 MPa
$ 2519/MT
- Density: 1.55 g/cc
- Tensile Strength at Break: 220 MPa
- Tensile Strength: 140 MPa @Temperature 80.0 °C
- Elongation at Break: 1.60 %
- Elongation at Break: 2.40 % @Temperature 80.0 °C
$ 1812/MT
- Density: 1.44 g/cc
- Linear Mold Shrinkage: 0.023 - 0.025 cm/cm
- Hardness, Rockwell M: 79
- Tensile Strength, Yield: 64.0 MPa
- Elongation at Break: 12 %
$ 1674/MT
- Density: 1.389 g/cc
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 5.176 GPa
- Flexural Strength: 133 MPa
$ 1838/MT
- Density: 1.35 g/cc
- Tensile Modulus: 4.00 GPa
- Flexural Strength: 130 MPa
- Flexural Modulus: 3.90 GPa
- Melting Point: 280 °C
$ 1871/MT
- Density: 1.53 g/cc
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00800 - 0.0100 cm/cm
- Melt Flow: 18.0 g/10 min @Load 5.00 kg, Temperature 250 °C
- Hardness, Rockwell M: 83.0
$ 1461/MT
- Specific Gravity: 0.820 g/cc
- Density: 0.00126 g/cc
- Particle Size: 0.00010 - 0.0010 µm
- Particle Mesh Size: 200 Mesh
- Molecular Weight: 30.03 g/mol
$ 1960/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Water Absorption: 0.0800 % @Temperature 22.8 °C
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
$ 2497/MT
- Density: 1.95 g/cc
- Water Absorption at Saturation: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.00200 - 0.00500 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00300 - 0.00600 cm/cm
- Tensile Strength at Break: 160 MPa
$ 1622/MT
- Specific Gravity: 1.64 g/cc
- Density: 0.000948 g/cc
- Density: 1.65 g/cc
- Water Absorption: 0.0300 % @Temperature 22.8 °C
- Water Absorption at Saturation: 0.0200 %
$ 1539/MT
- Tensile Strength at Break: 175 MPa
- Elongation at Break: 1.65 %
- Tensile Modulus: 14.5 GPa
- Flexural Strength: 265 MPa
- Flexural Modulus: 13.0 GPa
$ 1541/MT
- Density: 1.71 g/cc
- Water Absorption: 0.040 %
- Moisture Absorption at Equilibrium: 0.040 %
- Linear Mold Shrinkage: 0.0010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0020 cm/cm
$ 2596/MT
- Solids Content: 50 %
- Particle Size: 150 µm
- pH: 8.7
- Viscosity: 50 - 300 cP
- Glass Transition Temp, Tg: 20.0 °C
$ 1497/MT
- Density: 1.67 g/cc
- Moisture Absorption: 0.0150 %
- Water Absorption at Saturation: 0.0440 %
- Linear Mold Shrinkage, Flow: 0.00300 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00600 cm/cm
$ 1455/MT
- Density: 1.65 g/cc
- Filler Content: 30 %
- Tensile Strength at Break: 100 MPa
- Elongation at Break: 1.2 %
- Tensile Modulus: 10.0 GPa @Temperature 23.0 °C
$ 1945/MT
- Specific Gravity: 1.25 g/cc
- Density: 0.000721 g/cc
- Density: 1.26 g/cc
- Water Absorption: 0.200 % @Temperature 22.8 °C
- Linear Mold Shrinkage, Flow: 0.0170 - 0.0220 cm/cm
$ 1562/MT
- Density: 1.47 g/cc
- Tensile Strength, Yield: 62.0 MPa
- Elongation at Yield: 10.0 %
- Tensile Modulus: 3.00 GPa
- Charpy Impact, Notched: 0.400 J/cm²
$ 1575/MT
- Density: 1.37 g/cc
- Water Absorption: 0.20 %
- Moisture Absorption at Equilibrium: 0.80 %
- Linear Mold Shrinkage: 0.017 cm/cm
- Linear Mold Shrinkage, Transverse: 0.015 cm/cm
$ 1479/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.53 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.00200 - 0.00500 cm/cm
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
$ 2122/MT
- Density: 1.40 g/cc
- Moisture Absorption at Equilibrium: 0.040 %
- Moisture Vapor Transmission: 0.354 cc-mm/m²-24hr-atm
- Oxygen Transmission: 0.0315 cc-mm/m²-24hr-atm
- Oxygen Transmission: 0.0354 cc-mm/m²-24hr-atm
$ 1918/MT
- Density: 1.41 g/cc
- Moisture Absorption at Equilibrium: 0.20 % @Temperature 23.0 °C
- Water Absorption at Saturation: 0.65 % @Temperature 23.0 °C
- Melt Flow: 33.84 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 147 MPa
$ 1844/MT
- Specific Gravity: 1.55 g/cc
- Filler Content: 40 %
- Tensile Strength, Ultimate: 128 MPa @Temperature 23.0 °C
- Elongation at Break: 1.9 % @Temperature 23.0 °C
- Flexural Strength: 200 MPa
$ 1523/MT
- Density: 1.44 g/cc
- Density of Compound: 1.23 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
$ 2162/MT
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: 12.0 %
- Elongation at Yield: 4.00 %
- Tensile Modulus: 3.10 GPa
- Izod Impact, Notched (ISO): 3.80 kJ/m²
$ 1808/MT
- Density: 1.31 g/cc
- Tensile Strength, Yield: 60.0 MPa
- Elongation at Break: >= 50 %
- Elongation at Yield: 4.0 %
- Tensile Modulus: 2.60 GPa
$ 1812/MT
- Density: 0.940 g/cc
- Vinyl Acetate Content: 18 %
- Melt Flow: 0.70 g/10 min
- Hardness, Shore A: 92
- Hardness, Shore D: 37
$ 1557/MT
- Density: 1.53 g/cc
- Linear Mold Shrinkage, Flow: 0.000 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00800 cm/cm
- Tensile Strength at Break: 121 MPa
- Elongation at Break: 3.00 %
$ 1619/MT
- Density: 1.13 g/cc
- Tensile Strength at Break: 120 MPa
- Tensile Strength: 80.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.50 %
- Elongation at Break: 2.30 % @Temperature 80.0 °C
$ 2228/MT
- Density: 1.63 g/cc
- Filler Content: 30 %
- Tensile Strength at Break: 108 MPa
- Elongation at Break: 1.5 %
- Tensile Modulus: 10.8 GPa @Temperature 23.0 °C
$ 1708/MT
- Density: 1.50 g/cc
- Linear Mold Shrinkage, Flow: 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 cm/cm
- Hardness, Rockwell M: 80.0
- Tensile Strength at Break: 200 MPa
$ 1561/MT
- Density: 1.34 g/cc
- Water Absorption at Saturation: 0.800 %
- Linear Mold Shrinkage, Flow: 0.0230 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 5.50 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1794/MT
- Density: 1.45 g/cc
- Density of Compound: 1.23 g/cc
- Moisture Absorption: 0.150 %
- Viscosity Test: 80.0 cm³/g
- Melt Flow: 14.0 g/10 min @Load 2.16 kg, Temperature 250 °C
$ 1639/MT
- Density: 0.941 g/cc
- Vinyl Acetate Content: 28 %
- Melt Flow: 430 g/10 min @Load 0.325 kg, Temperature 125 °C
- Hardness, Shore A: 68
- Tensile Strength at Break: 3.50 MPa
$ 1501/MT
- Density: 1.63 g/cc
- Melt Flow: 7.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 38.0 MPa
- Elongation at Break: 13.0 %
- Elongation at Yield: 5.00 %
$ 1864/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.35 g/cc
- Density of Compound: 1.11 g/cc
- Moisture Absorption: 0.200 %
- Viscosity Test: 145 cm³/g
$ 1891/MT
- Density: 1.49 g/cc
- Tensile Strength at Break: 185 MPa
- Elongation at Break: 0.570 %
- Tensile Modulus: 37.277 GPa
- Flexural Strength: 343 MPa
$ 2328/MT
- Specific Gravity: 1.81 g/cc
- Density: 1.81 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0055 - 0.0075 cm/cm
$ 1739/MT
- Density: 1.03 g/cc
- Tensile Strength at Break: 76.0 MPa
- Elongation at Break: 2.50 %
- Tensile Modulus: 4.30 GPa
- Flexural Strength: 124 MPa
$ 1905/MT
- Solids Content: 50 %
- pH: 4.0
- Viscosity: 200 cP
- Glass Transition Temp, Tg: -15.0 °C
- FDA: Yes
$ 1476/MT
- Specific Gravity: 1.40 g/cc
- Density: 1.316 g/cc
- Density: 1.40 g/cc
- Water Absorption: 0.030 % @Temperature 22.8 °C
- Linear Mold Shrinkage, Flow: 0.010 cm/cm
$ 1531/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
- Melt Flow: 33.0 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength, Yield: 53.1 MPa
$ 2035/MT
- Specific Gravity: 0.966 g/cc
- Volatile Organic Compounds (VOC) Content: 2.0 g/l
- Solubility in Water: <= 0.10 %
- Boiling Point: 408 °C
- Acid Value: <= 0.10
$ 1604/MT
- Density: 1.33 g/cc
- Tensile Strength at Break: 106 MPa
- Elongation at Break: 1.7 %
- Tensile Modulus: 10.4 GPa
- Flexural Strength: 183 MPa
$ 1481/MT
- Density: 1.92 g/cc
- Water Absorption at Saturation: 0.0170 %
- Linear Mold Shrinkage, Flow: 0.00100 - 0.00300 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 - 0.00800 cm/cm
- Hardness, Rockwell M: 100
$ 2236/MT
- Specific Gravity: 1.47 g/cc
- Density: 1.48 g/cc
- Water Absorption: 0.0300 % @Temperature -17.8 °C
- Water Absorption at Saturation: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00600 cm/cm
$ 2246/MT
- Solids Content: 55 %
- pH: 4.0
- Viscosity: 1800 cP
- Glass Transition Temp, Tg: 30.0 °C
- Particle Charge: Anionic
- Stabilization: PVOH
$ 1721/MT
- Density: 0.941 g/cc
- Vinyl Acetate Content: 28 %
- Melt Flow: 400 g/10 min @Load 0.325 kg, Temperature 125 °C
- Hardness, Shore A: 68
- Tensile Strength at Break: 3.50 MPa
$ 1576/MT
- Density: 1.41 g/cc
- Tensile Strength at Break: 100 MPa
- Elongation at Break: 2.5 %
- Tensile Modulus: 5.90 GPa
- Flexural Strength: 160 MPa
$ 1504/MT
- Density: 1.01 g/cc
- Tensile Strength at Break: 88.0 MPa
- Elongation at Break: 2.80 %
- Tensile Modulus: 4.60 GPa
- Flexural Strength: 145 MPa
$ 1810/MT
- Density: 1.42 g/cc
- Water Absorption: 0.75 %
- Melt Flow: 8.5 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 64.0 MPa
- Elongation at Break: 20 %
$ 2042/MT
- Specific Gravity: 1.24 g/cc
- Density: 1.24 g/cc
- Water Absorption: 0.300 % @Temperature 22.8 °C
- Linear Mold Shrinkage, Flow: 0.0170 - 0.0200 cm/cm
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
$ 1981/MT
- Density: 1.40 g/cc
- Melt Flow: 8.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 62.0 MPa
- Elongation at Break: 30.0 %
- Elongation at Yield: 9.00 %
$ 1572/MT
- Density: 1.84 g/cc
- Water Absorption: 0.10 %
- Linear Mold Shrinkage: 0.0010 - 0.0030 cm/cm
- Tensile Strength, Ultimate: 75.0 MPa
- Elongation at Break: 0.26 %
$ 1574/MT
- Specific Gravity: 1.20 g/cc
- Density: 0.000689 g/cc
- Density: 1.19 g/cc
- Water Absorption: 0.400 % @Temperature 22.8 °C
- Linear Mold Shrinkage, Flow: 0.0100 cm/cm
$ 1480/MT
- Solids Content: 55 %
- pH: 5.0
- Viscosity: 1000 cP
- Glass Transition Temp, Tg: 30.0 °C
- FDA: Yes
$ 1470/MT
- Density: 1.62 g/cc
- Water Absorption: 0.27 %
- Moisture Absorption at Equilibrium: 0.80 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.014 cm/cm
$ 1948/MT
- Density: 1.63 g/cc
- Linear Mold Shrinkage, Flow: 0.000 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00500 cm/cm
- Tensile Strength at Break: 125 MPa
- Elongation at Break: 4.00 %
$ 1512/MT
- Density: 1.66 g/cc
- Moisture Absorption: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00600 - 0.00900 cm/cm
- Tensile Strength at Break: 150 MPa
$ 1938/MT
- Density: 1.41 g/cc
- Moisture Absorption at Equilibrium: 0.20 % @Temperature 23.0 °C
- Water Absorption at Saturation: 0.65 % @Temperature 23.0 °C
- Melt Flow: 1.27 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 150 MPa
$ 1579/MT
- Density: 1.61 g/cc
- Water Absorption: 0.050 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Hardness, Rockwell M: 93
- Tensile Strength, Ultimate: 140 MPa
$ 2447/MT
- Density: 1.43 g/cc
- Melt Flow: 16 g/10 min
- Tensile Strength, Yield: 56.0 MPa
- Flexural Modulus: 2.39 GPa
- Izod Impact, Notched (ISO): 4.60 kJ/m²
$ 2285/MT
- Density: 1.57 g/cc
- Moisture Absorption: 1.00 %
- Tensile Strength at Break: 260 MPa
- Tensile Strength: 150 MPa @Temperature 80.0 °C
- Elongation at Break: 2.2 %
$ 1697/MT
- Density: 0.924 g/cc
- Thickness: 150 microns
- Melt Flow: 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 11.0 MPa
- Film Tensile Strength at Yield, TD: 11.0 MPa
$ 2549/MT
- Density: 1.89 g/cc
- Water Absorption: 0.020 %
- Moisture Absorption at Equilibrium: 0.020 %
- Linear Mold Shrinkage: 0.0010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0020 cm/cm
$ 1504/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Water Absorption: 0.090 % @Temperature 22.8 °C
- Viscosity Test: 75 cm³/g
- Linear Mold Shrinkage, Flow: 0.018 - 0.020 cm/cm
$ 2219/MT
- Density: 1.41 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.65 %
- Linear Mold Shrinkage: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.020 cm/cm
$ 1741/MT
- Density: 1.41 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.65 %
- Melt Flow: 54.99 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 148 MPa
$ 1955/MT
- Density: 1.41 g/cc
- Density of Compound: 1.20 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
$ 2281/MT
- Density: 0.936 g/cc
- Vinyl Acetate Content: 16 %
- Melt Flow: 28 g/10 min
- Hardness, Shore D: 35
- Tensile Strength, Ultimate: 9.00 MPa
$ 1552/MT
- Density: 1.64 g/cc
- Linear Mold Shrinkage, Flow: 0.000 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00650 cm/cm
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 5.00 %
$ 1798/MT
- Density: 1.99 g/cc
- Melting Point: 260 °C
- Melt Temperature: <= 320 °C
$ 1888/MT
- Solids Content: 50 %
- Particle Size: 200 µm
- pH: 6.5
- Viscosity: 500 cP
- Glass Transition Temp, Tg: 0.000 °C
$ 1695/MT
- Density: 1.54 g/cc
- Moisture Absorption: 0.0300 %
- Linear Mold Shrinkage, Flow: 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00500 cm/cm
- Hardness, Rockwell M: 62.0
$ 1997/MT
- Density: 1.46 g/cc
- Tensile Strength at Break: 77.0 MPa
- Tensile Modulus: 4.60 GPa
- Flexural Modulus: 4.30 GPa
- Izod Impact, Notched (ISO): 6.20 kJ/m²
$ 1824/MT
- Solids Content: 55 %
- Particle Size: 500 µm
- pH: 5.0
- Viscosity: 1000 cP
- Glass Transition Temp, Tg: 30.0 °C
$ 1502/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Density of Compound: 1.20 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.750 %
$ 1621/MT
- Specific Gravity: 1.48 g/cc
- Density: 1.48 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.750 %
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
$ 1513/MT
- Density: 1.54 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.800 %
- Tensile Strength at Break: 99.0 MPa
- Elongation at Break: 2.20 %
$ 1492/MT
- Density: 1.46 g/cc
- Linear Mold Shrinkage, Flow: -0.00200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00500 cm/cm
- Hardness, Rockwell M: 43.0
- Tensile Strength at Break: 175 MPa
$ 2593/MT
- Solids Content: 50 %
- Particle Size: 200 µm
- pH: 6.5
- Viscosity: 100 cP
- Glass Transition Temp, Tg: 30.0 °C
$ 1711/MT
- Density: 1.13 g/cc
- Tensile Strength at Break: 110 MPa
- Tensile Strength: 70.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.20 %
- Elongation at Break: 2.30 % @Temperature 80.0 °C
$ 2072/MT
- Density: 1.34 g/cc
- Tensile Strength at Break: 145 MPa
- Tensile Strength: 85.0 MPa @Temperature 80.0 °C
- Elongation at Break: 1.8 %
- Elongation at Break: 2.3 % @Temperature 80.0 °C
$ 1709/MT
- Density: 1.33 g/cc
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage, Flow: 0.019 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Tensile Strength, Yield: 44.0 MPa
$ 1616/MT
- Density: 1.22 g/cc
- Tensile Strength at Break: 135 MPa
- Tensile Strength: 84.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.00 %
- Elongation at Break: 2.10 % @Temperature 80.0 °C
$ 2338/MT
- Solids Content: 49 %
- pH: 5.0
- Viscosity: 450 cP
- Glass Transition Temp, Tg: -23.0 °C
- FDA: Yes
$ 1615/MT
- Density: 1.76 g/cc
- Linear Mold Shrinkage, Flow: 0.00200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00500 cm/cm
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 1.40 %
$ 1722/MT
- Density: 1.22 g/cc
- Tensile Strength at Break: 135 MPa
- Tensile Strength: 84.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.00 %
- Elongation at Break: 2.10 % @Temperature 80.0 °C
$ 2337/MT
- Density: 1.37 g/cc
- Water Absorption: 0.65 %
- Linear Mold Shrinkage, Flow: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0017 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1462/MT
- Density: 1.23 g/cc
- Melt Flow: 8.70 g/10 min @Load 2.16 kg, Temperature 250 °C
- Melt Flow: 20.0 g/10 min @Load 2.16 kg, Temperature 250 °C
- Hardness, Shore D: 55.0
- Tensile Strength at Break: 16.0 MPa
$ 1801/MT
- Specific Gravity: 1.44 g/cc
- Density: 1.44 g/cc
- Water Absorption: 0.0700 % @Temperature 22.8 °C
- Moisture Absorption: 0.170 %
- Linear Mold Shrinkage, Flow: 0.0120 - 0.0160 cm/cm
$ 2116/MT
- Density: 0.914 g/cc
- Melt Flow: 70 g/10 min @Load 0.325 kg, Temperature 125 °C
- Hardness, Shore A: 95
- Tensile Strength at Break: 8.00 MPa
- Elongation at Break: 120 %
$ 2476/MT
- Density: 1.41 g/cc
- Density of Compound: 1.20 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
$ 1514/MT
- Specific Gravity: 1.40 g/cc
- Density: 0.000809 g/cc
- Density: 1.56 g/cc
- Water Absorption: 0.0300 % @Temperature 22.8 °C
- Water Absorption at Saturation: 0.0200 %
$ 1562/MT
- Density: 1.61 g/cc
- Moisture Absorption: 0.0300 %
- Linear Mold Shrinkage, Flow: 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 cm/cm
- Hardness, Rockwell M: 71.0
$ 1885/MT
- Density: 1.22 g/cc
- Tensile Strength at Break: 135 MPa
- Tensile Strength: 76.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.00 %
- Elongation at Break: 2.30 % @Temperature 80.0 °C
$ 2315/MT
- Density: 1.34 g/cc
- Tensile Strength at Break: 140 MPa
- Tensile Strength: 85.0 MPa @Temperature 80.0 °C
- Elongation at Break: 1.20 %
- Elongation at Break: 2.30 % @Temperature 80.0 °C
$ 1658/MT
- Density: 1.34 g/cc
- Tensile Strength at Break: 140 MPa
- Tensile Strength: 85.0 MPa @Temperature 80.0 °C
- Elongation at Break: 1.20 %
- Elongation at Break: 2.30 % @Temperature 80.0 °C
$ 1632/MT
- Density: 1.34 g/cc
- Tensile Strength at Break: 140 MPa
- Tensile Strength: 85.0 MPa @Temperature 80.0 °C
- Elongation at Break: 1.20 %
- Elongation at Break: 2.30 % @Temperature 80.0 °C
$ 1771/MT
- Density: 2.00 g/cc
- Water Absorption: 0.020 %
- Linear Mold Shrinkage, Flow: 0.0015 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm
- Hardness, Rockwell M: 100
$ 1562/MT
- Solids Content: 45 %
- pH: 4.5
- Viscosity: 200 cP
- Glass Transition Temp, Tg: -15.0 °C
- Crosslinking: Yes
$ 2295/MT
- Density: 1.07 g/cc
- Solids Content: >= 50 %
- pH: 8.0
- Viscosity: 500 cP
- Glass Transition Temp, Tg: 0.000 °C
$ 1532/MT
- Density: 1.02 g/cc
- Solids Content: >= 63 %
- pH: 4.5
- Viscosity: <= 1000 cP
- Glass Transition Temp, Tg: -18.0 °C
$ 1511/MT
- Solids Content: 45 %
- pH: 4.5
- Viscosity: 200 cP
- Glass Transition Temp, Tg: -15.0 °C
- Crosslinking: Yes
$ 1721/MT
- Solids Content: 45 %
- pH: 4.5
- Viscosity: 200 cP
- Glass Transition Temp, Tg: -15.0 °C
- Crosslinking: Yes
$ 2368/MT
- Density: 1.69 g/cc
- Tensile Strength at Break: 255 MPa
- Elongation at Break: 1.7 %
- Tensile Modulus: 21.0 GPa
- Flexural Strength: 400 MPa
$ 1953/MT
- Solids Content: 45 %
- pH: 4.5
- Viscosity: 200 cP
- Glass Transition Temp, Tg: -15.0 °C
- Crosslinking: Yes
$ 1680/MT
- Solids Content: 45 %
- pH: 4.5
- Viscosity: 200 cP
- Glass Transition Temp, Tg: -15.0 °C
- Crosslinking: Yes
$ 1578/MT
- Solids Content: 55 %
- Particle Size: 300 µm
- pH: 5.0
- Viscosity: 300 - 1000 cP
- Glass Transition Temp, Tg: 19.0 °C
$ 1826/MT
- Density: 1.43 g/cc
- Tensile Strength at Break: 92.0 MPa
- Elongation at Break: 1.9 %
- Tensile Modulus: 7.50 GPa
- Flexural Strength: 140 MPa
$ 1461/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Moisture Absorption at Equilibrium: 0.17 %
- Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm
- Hardness, Rockwell M: 90
$ 2476/MT
- Density: 1.35 g/cc
- Density: 1.37 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.020 cm/cm
- Melt Flow: 7.0 g/10 min
$ 2439/MT
- Specific Gravity: 1.80 g/cc
- Density: 1.80 g/cc
- Water Absorption: 0.0200 % @Temperature 22.8 °C
- Water Absorption at Saturation: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.00200 - 0.00400 cm/cm
$ 1714/MT
- Density: 1.47 g/cc
- Tensile Strength at Break: 137 MPa
- Elongation at Break: 1.9 %
- Tensile Modulus: 9.80 GPa
- Flexural Strength: 200 MPa
$ 2095/MT
- Density: 1.80 g/cc
- Linear Mold Shrinkage: 0.0010 - 0.0030 cm/cm
- Tensile Strength, Ultimate: 55.0 MPa
- Elongation at Break: 0.76 %
- Tensile Modulus: 10.7 GPa
$ 1742/MT
- Tensile Strength at Break: 100 MPa
- Elongation at Break: 2.3 %
- Tensile Modulus: 7.30 GPa
- Flexural Strength: 155 MPa
- Flexural Modulus: 7.10 GPa
$ 2072/MT
- Density: 1.50 g/cc
- Tensile Strength at Break: 200 MPa
- Flexural Modulus: 25.5 GPa
- Izod Impact, Notched (ISO): 10.0 kJ/m²
- Melting Point: 280 °C
- Deflection Temperature at 1.8 MPa (264 psi): 235 °C
$ 1548/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Moisture Absorption: 0.140 %
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
$ 1976/MT
- Specific Gravity: 1.70 g/cc
- Density: 1.73 g/cc
- Water Absorption: 0.0600 % @Temperature 22.8 °C
- Linear Mold Shrinkage, Flow: 0.00200 cm/cm
- Linear Mold Shrinkage, Flow: 0.00600 cm/cm
$ 2163/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 24.0 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1503/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.750 %
- Linear Mold Shrinkage, Flow: 0.0220 cm/cm
$ 1646/MT
- Density: 1.49 g/cc
- Water Absorption: 0.10 %
- Linear Mold Shrinkage: 0.0050 - 0.0080 cm/cm
- Tensile Strength, Ultimate: 60.0 MPa
- Elongation at Break: 0.80 %
$ 1967/MT
- Density: 1.20 g/cc
- Tensile Strength at Break: 140 MPa
- Tensile Strength: 80.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.20 %
- Elongation at Break: 2.40 % @Temperature 80.0 °C
$ 1497/MT
- Density: 1.60 g/cc
- Water Absorption: 0.020 %
- Linear Mold Shrinkage, Flow: 0.0025 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Hardness, Rockwell M: 100
$ 2105/MT
- Density: 1.38 g/cc
- Linear Mold Shrinkage: 0.019 cm/cm
- Linear Mold Shrinkage, Transverse: 0.017 cm/cm
- Tensile Strength, Yield: 50.0 MPa
- Tensile Modulus: 2.40 GPa
$ 1646/MT
- Density: 1.40 g/cc
- Water Absorption at Saturation: 0.600 %
- Linear Mold Shrinkage, Flow: 0.0185 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0175 cm/cm
- Melt Flow: 25.0 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 2399/MT
- Density: 1.38 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0180 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0160 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1840/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 12.0 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1473/MT
- Density: 1.22 g/cc
- Tensile Strength at Break: 110 MPa
- Tensile Strength: 63.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.0 %
- Elongation at Break: 2.5 % @Temperature 80.0 °C
$ 1827/MT
- Specific Gravity: 0.930 g/cc
- Density: 0.930 g/cc
- Density of Compound: 0.930 g/cc
- Moisture Absorption: <= 0.0100 %
- Water Absorption at Saturation: <= 0.0100 %
$ 1751/MT
- Density: 1.61 g/cc
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 3.00 %
- Tensile Modulus: 12.0 GPa
- Flexural Strength: 170 MPa
$ 1710/MT
- Density: 1.54 g/cc
- Linear Mold Shrinkage, Flow: 0.00300 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00800 cm/cm
- Melt Flow: 2.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: 110 MPa
$ 1661/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Water Absorption: 0.0800 % @Temperature 22.8 °C
- Moisture Absorption: 0.190 %
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
$ 2066/MT
- Specific Gravity: 1.40 g/cc
- Density: 1.38 g/cc
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Flow: 0.0220 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0160 cm/cm
$ 1725/MT
- Solids Content: 49 %
- Viscosity: 3500 - 7000 cP
- Glass Transition Temp, Tg: 30.0 °C
- Colloid: PVOH
$ 1446/MT
- Solids Content: 55 %
- Viscosity: 2500 - 4500 cP
- Glass Transition Temp, Tg: 30.0 °C
- Colloid: PVOH
$ 2067/MT
- Density: 1.42 g/cc
- Tensile Strength, Yield: 61.0 MPa
- Tensile Modulus: 2.65 GPa
- Charpy Impact, Notched: 0.460 J/cm²
- Deflection Temperature at 1.8 MPa (264 psi): 94.0 °C
$ 1463/MT
- Linear Mold Shrinkage, Flow: 0.00 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 1.2 %
- Elongation at Break: 1.8 %
$ 1920/MT
- Density: 1.44 g/cc
- Filler Content: 30 %
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 2.8 %
- Tensile Modulus: 8.40 GPa @Temperature 23.0 °C
$ 2080/MT
- Specific Gravity: 1.43 g/cc
- Density: 1.41 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0180 cm/cm
$ 1562/MT
- Density: 1.41 g/cc
- Density of Compound: 1.20 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
$ 1573/MT
- Density: 1.31 g/cc
- Tensile Strength at Break: 32.0 MPa
- Tensile Strength, Yield: 41.0 MPa
- Elongation at Break: 50 %
- Elongation at Yield: 16.8 %
$ 1622/MT
- Density: 1.57 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Hardness, Rockwell M: 92
$ 1910/MT
- Specific Gravity: 1.34 g/cc
- Density: 1.34 g/cc
- Water Absorption: 0.110 % @Temperature 22.8 °C
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.00400 - 0.00600 cm/cm
$ 2328/MT
- Density: 1.60 g/cc
- Moisture Absorption: 0.150 %
- Viscosity Test: 50.0 cm³/g
- Linear Mold Shrinkage, Flow: 0.00900 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00700 cm/cm
$ 2100/MT
- Density: 1.38 g/cc
- Melt Flow: 1.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 44.0 MPa
- Elongation at Break: 15.0 %
- Elongation at Yield: 11.0 %
$ 2474/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.000500 - 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00300 - 0.00400 cm/cm
- Tensile Strength at Break: 155 MPa
$ 1563/MT
- Density: 1.63 g/cc
- Linear Mold Shrinkage, Flow: 0.000500 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00730 cm/cm
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 4.30 %
$ 2298/MT
- Density: 1.47 g/cc
- Tensile Strength at Break: 149 MPa
- Tensile Strength: 90.0 MPa @Temperature 80.0 °C
- Elongation at Break: 1.60 %
- Elongation at Break: 2.10 % @Temperature 80.0 °C
$ 1814/MT
- Tensile Strength at Break: 95.0 MPa
- Tensile Strength: 52.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.3 %
- Elongation at Break: 2.9 % @Temperature 80.0 °C
- Tensile Modulus: 6.60 GPa
$ 1510/MT
- Specific Gravity: 1.50 g/cc
- Density: 1.50 g/cc
- Water Absorption: 0.100 % @Temperature 22.8 °C
- Linear Mold Shrinkage, Flow: 0.00400 - 0.00600 cm/cm
- Melt Flow: 10.0 g/10 min
$ 1827/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Moisture Absorption: 0.170 %
- Linear Mold Shrinkage, Flow: 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00900 cm/cm
$ 1503/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0160 cm/cm
- Linear Mold Shrinkage, Flow: 0.0220 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
$ 1836/MT
- Density: 1.12 g/cc
- Tensile Strength at Break: 95.0 MPa
- Tensile Strength: 55.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.60 %
- Elongation at Break: 3.40 % @Temperature 80.0 °C
$ 1484/MT
- Density: 1.60 g/cc
- Water Absorption: 0.020 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0075 cm/cm
- Hardness, Rockwell M: 100
$ 1514/MT
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 4.0 %
- Tensile Modulus: 11.099 GPa
- Flexural Strength: 175 MPa
- Flexural Modulus: 11.13 GPa
$ 1801/MT
- Density: 1.81 g/cc
- Water Absorption: 0.010 %
- Moisture Absorption at Equilibrium: 0.010 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0020 cm/cm
$ 2091/MT
- Density: 1.42 g/cc
- Water Absorption at Saturation: 1.20 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 6.50 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 2126/MT
- Density: 1.607 g/cc
- Water Absorption: 0.0500 % @Temperature 22.8 °C
- Linear Mold Shrinkage, Flow: 0.00100 - 0.00800 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00800 - 0.0130 cm/cm
- Tensile Strength at Break: 115 MPa
$ 1795/MT
- Density: 1.67 g/cc
- Moisture Absorption: 0.00700 %
- Water Absorption at Saturation: 0.00400 %
- Linear Mold Shrinkage, Flow: 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 cm/cm
$ 2496/MT
- Specific Gravity: 1.58 g/cc
- Density: 1.58 g/cc
- Filler Content: 20 %
- Hardness, Rockwell M: 84
- Tensile Strength at Break: 100 MPa
$ 1553/MT
- Specific Gravity: 1.12 g/cc
- Density: 1.12 g/cc
- Tensile Strength at Break: 92.0 MPa
- Tensile Strength at Break: 108 MPa
- Tensile Strength at Break: 66.9 MPa @Temperature 93.3 °C
$ 1618/MT
- Density: 1.07 g/cc
- Water Absorption: <= 0.40 %
- Linear Mold Shrinkage: 0.015 cm/cm
- Tensile Strength, Yield: 13.1 MPa
- Elongation at Break: >= 310 %
$ 1617/MT
- Specific Gravity: 1.40 g/cc
- Density: 1.35 g/cc
- Water Absorption at Saturation: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.0120 - 0.0150 cm/cm
- Linear Mold Shrinkage, Flow: 0.100 - 0.120 cm/cm
$ 1453/MT
- Density: 1.40 g/cc
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0170 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 64.0 MPa
$ 1761/MT
- Density: 1.52 g/cc
- Tensile Strength at Break: 150 MPa
- Tensile Strength: 80.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.00 %
- Elongation at Break: 2.90 % @Temperature 80.0 °C
$ 2113/MT
- Density: 1.43 g/cc
- Water Absorption at Saturation: 0.750 %
- Linear Mold Shrinkage, Flow: 0.0230 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0140 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 2193/MT
- Solids Content: 54 %
- Viscosity: 1800 - 3000 cP
- Glass Transition Temp, Tg: -15.0 °C
- Colloid: PVOH
$ 1907/MT
- Density: 1.50 g/cc
- Linear Mold Shrinkage, Flow: 0.000 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00100 cm/cm
- Hardness, Rockwell M: 99.0
- Tensile Strength at Break: 200 MPa
$ 1665/MT
- Specific Gravity: 0.930 g/cc
- Density: 0.940 g/cc
- Density of Compound: 0.940 g/cc
- Moisture Absorption: <= 0.0100 %
- Water Absorption at Saturation: <= 0.0100 %
$ 2044/MT
- Density: 1.45 g/cc
- Water Absorption: 0.10 %
- Linear Mold Shrinkage: 0.0070 - 0.010 cm/cm
- Tensile Strength, Ultimate: 46.0 MPa
- Elongation at Break: 0.90 %
$ 2287/MT
- Density: 1.34 g/cc
- Tensile Strength at Break: 140 MPa
- Tensile Strength: 85.0 MPa @Temperature 80.0 °C
- Elongation at Break: 1.20 %
- Elongation at Break: 2.30 % @Temperature 80.0 °C
$ 2130/MT
- Density: 1.37 g/cc
- Water Absorption at Saturation: 0.80 %
- Tensile Strength, Yield: 43.0 MPa
- Elongation at Yield: 16 %
- Tensile Modulus: 1.65 GPa
$ 1699/MT
- Density: 1.47 g/cc
- Linear Mold Shrinkage, Flow: 0.0170 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0160 cm/cm
- Tensile Strength, Yield: 62.0 MPa
- Elongation at Yield: 10.0 %
$ 1826/MT
- Density: 1.981 g/cc
- Water Absorption at Saturation: 0.190 %
- Linear Mold Shrinkage, Flow: 0.00110 - 0.00160 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00180 - 0.00230 cm/cm
- Hardness, Rockwell M: 102
$ 2391/MT
- Density: 1.74 g/cc
- Density of Compound: 1.45 g/cc
- Linear Mold Shrinkage, Flow: 0.000500 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00500 cm/cm
- Hardness, Rockwell M: 58.0
$ 1466/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 32.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 68.0 MPa
$ 1571/MT
- Density: 1.40 g/cc
- Water Absorption: 0.21 %
- Moisture Absorption at Equilibrium: 0.80 %
- Linear Mold Shrinkage: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
$ 1656/MT
- Density: 1.33 g/cc
- Melt Flow: 13.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 41.0 MPa
- Elongation at Yield: 10.0 %
- Tensile Modulus: 1.90 GPa
$ 1479/MT
- Density: 1.65 g/cc
- Linear Mold Shrinkage, Flow: 0.000 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00370 cm/cm
- Tensile Strength at Break: 135 MPa
- Elongation at Break: 1.80 %
$ 1966/MT
- Specific Gravity: 1.60 g/cc
- Density: 0.000926 g/cc
- Density: 1.65 g/cc
- Water Absorption: 0.0200 % @Temperature 22.8 °C
- Water Absorption at Saturation: 0.0200 %
$ 1640/MT
- Density: 1.34 g/cc
- Tensile Strength at Break: 140 MPa
- Tensile Strength: 85.0 MPa @Temperature 80.0 °C
- Elongation at Break: 1.8 %
- Elongation at Break: 2.3 % @Temperature 80.0 °C
$ 1966/MT
- Density: 1.40 g/cc
- Tensile Strength at Break: 94.0 MPa
- Elongation at Break: 3.8 %
- Tensile Modulus: 5.47 GPa
- Flexural Strength: 138 MPa
$ 1913/MT
- Density: 1.41 g/cc
- Water Absorption: 0.22 %
- Moisture Absorption at Equilibrium: 0.80 %
- Linear Mold Shrinkage: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
$ 1535/MT
- Density: 1.37 g/cc
- Moisture Absorption at Equilibrium: 0.25 %
- Water Absorption at Saturation: 0.65 %
- Melt Flow: 9.59 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 86.0 MPa
$ 1654/MT
- Density: 1.38 g/cc
- Density of Compound: 1.17 g/cc
- Moisture Absorption: 0.200 %
- Viscosity Test: 80.0 cm³/g
- Melt Flow: 21.0 g/10 min @Load 2.16 kg, Temperature 250 °C
$ 1474/MT
- Density: 1.34 g/cc
- Tensile Strength at Break: 140 MPa
- Tensile Strength: 85.0 MPa @Temperature 80.0 °C
- Elongation at Break: 1.80 %
- Elongation at Break: 2.30 % @Temperature 80.0 °C
$ 1958/MT
- Specific Gravity: 1.63 g/cc
- Density: 1.63 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Thickness 2.00 mm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm @Thickness 2.00 mm
$ 2578/MT
- Density: 1.39 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.70 %
- Melt Flow: 25.02 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 115 MPa
$ 1562/MT
- Specific Gravity: 1.51 g/cc
- Density: 1.50 g/cc
- Tensile Strength at Break: 91.0 MPa
- Tensile Strength at Break: 113 MPa
- Tensile Strength at Break: 49.0 MPa @Temperature 93.3 °C
$ 1807/MT
- Specific Gravity: 1.49 g/cc
- Density: 1.49 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
$ 1750/MT
- Density: 1.52 g/cc
- Water Absorption: 0.020 %
- Moisture Absorption at Equilibrium: 0.020 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm
$ 1654/MT
- Density: 1.22 g/cc
- Tensile Strength at Break: 135 MPa
- Tensile Strength: 76.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.00 %
- Elongation at Break: 2.30 % @Temperature 80.0 °C
$ 1445/MT
- Density: 1.56 g/cc
- Tensile Strength at Break: 215 MPa
- Elongation at Break: 1.60 %
- Tensile Modulus: 16.4 GPa
- Flexural Strength: 350 MPa
$ 1690/MT
- Density: 1.73 g/cc
- Water Absorption at Saturation: 0.020 %
- Linear Mold Shrinkage, Flow: 0.0010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm
- Tensile Strength at Break: 112 MPa
$ 1749/MT
- Density: 1.53 g/cc
- Water Absorption at Saturation: 0.800 %
- Melt Flow: 8.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 46.0 MPa
- Elongation at Break: 15.0 %
$ 1620/MT
- Density: 1.53 g/cc
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 3.10 %
- Tensile Modulus: 9.30 GPa
$ 1455/MT
- Density: 1.14 g/cc
- Water Absorption: 0.10 %
- Linear Mold Shrinkage: 0.0135 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0135 cm/cm
- Tensile Strength, Ultimate: 19.0 MPa
$ 1651/MT
- Density: 1.67 g/cc
- Moisture Absorption: 0.00200 %
- Water Absorption at Saturation: 0.0150 %
- Linear Mold Shrinkage, Flow: 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00500 cm/cm
$ 2546/MT
- Density: 1.47 g/cc
- Tensile Strength at Break: 149 MPa
- Elongation at Break: 1.55 %
- Tensile Modulus: 14.391 GPa
- Flexural Strength: 254 MPa
$ 2251/MT
- Density: 1.14 g/cc
- Water Absorption: 0.10 %
- Linear Mold Shrinkage: 0.0135 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0135 cm/cm
- Tensile Strength, Ultimate: 19.0 MPa
$ 1615/MT
- Density: 1.67 g/cc
- Water Absorption at Saturation: 0.0700 %
- Linear Mold Shrinkage, Flow: 0.000 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00290 cm/cm
- Hardness, Rockwell M: 62.0
$ 1871/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 12.5 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1711/MT
- Density: 1.74 g/cc
- Melt Density: 1.39 g/cc
- Moisture Absorption at Equilibrium: 0.010 %
- Water Absorption at Saturation: 0.030 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
$ 1491/MT
- Density: 1.41 g/cc
- Density of Compound: 1.20 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0210 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
$ 1980/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.53 g/cc
- Moisture Absorption: 0.200 %
- Viscosity Test: 74.0 cm³/g
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
$ 1459/MT
- Density: 1.62 g/cc
- Water Absorption: 0.020 %
- Moisture Absorption at Equilibrium: 0.020 %
- Linear Mold Shrinkage: 0.0010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0020 cm/cm
$ 2105/MT
- Density: 1.46 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.800 %
- Linear Mold Shrinkage, Flow: 0.00900 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0120 cm/cm
$ 1787/MT
- Density: 1.22 g/cc
- Melt Flow: 16.0 g/10 min @Load 2.16 kg, Temperature 240 °C
- Hardness, Shore D: 60.0
- Tensile Strength at Break: 25.0 MPa
- Elongation at Break: 304 %
$ 1486/MT
- Solids Content: 55 %
- Viscosity: 4500 - 6000 cP
- Glass Transition Temp, Tg: 30.0 °C
- Colloid: PVOH
$ 1778/MT
- Specific Gravity: 0.820 g/cc
- Density: 0.00126 g/cc
- Particle Size: 0.00010 - 0.0010 µm
- Particle Mesh Size: 200 Mesh
- Molecular Weight: 30.03 g/mol
$ 1717/MT
- Density: 1.50 g/cc
- Moisture Absorption: 0.0600 %
- Linear Mold Shrinkage, Flow: 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00300 cm/cm
- Hardness, Rockwell M: 83.0
$ 2000/MT
- Tensile Strength at Break: 215 MPa
- Elongation at Break: 2.00 %
- Tensile Modulus: 13.0 GPa
- Flexural Strength: 200 MPa
- Flexural Modulus: 8.10 GPa
$ 1999/MT
- Density: 1.89 g/cc
- Linear Mold Shrinkage, Flow: 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00600 cm/cm
- Tensile Strength at Break: 125 MPa
- Elongation at Break: 2.50 %
$ 1490/MT
- Density: 1.41 g/cc
- Density of Compound: 1.20 g/cc
- Water Absorption at Saturation: 0.650 %
- Melt Flow: 2.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 62.0 MPa
$ 1986/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1683/MT
- Density: 0.945 g/cc
- Vinyl Acetate Content: 28 %
- Melt Flow: 150 g/10 min @Load 0.325 kg, Temperature 125 °C
- Hardness, Shore A: 74
- Tensile Strength at Break: 5.50 MPa
$ 1451/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.018 - 0.020 cm/cm
- Linear Mold Shrinkage, Flow: 0.018 - 0.020 cm/cm
- Melt Flow: 35 g/10 min
$ 1621/MT
- Density: 1.60 g/cc
- Moisture Absorption at Equilibrium: 0.15 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0080 cm/cm
- Tensile Strength at Break: 115 MPa
$ 1953/MT
- Density: 1.58 g/cc
- Linear Mold Shrinkage: 0.0070 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm
- Tensile Strength at Break: 161 MPa
- Tensile Strength at Break: 170 MPa
$ 1505/MT
- Density: 1.45 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 - 0.012 cm/cm
- Hardness, Rockwell M: 82
- Tensile Strength at Break: 88.0 MPa
$ 1485/MT
- Specific Gravity: 1.38 g/cc
- Density: 1.38 g/cc
- Moisture Absorption: 0.160 %
- Linear Mold Shrinkage, Flow: 0.00400 cm/cm
- Linear Mold Shrinkage, Flow: 0.00500 - 0.0100 cm/cm
$ 1646/MT
- Density: 1.45 g/cc
- Tensile Strength at Break: 205 MPa
- Elongation at Break: 2.00 %
- Tensile Modulus: 13.0 GPa
- Flexural Strength: 320 MPa
$ 1780/MT
- Solids Content: 55 %
- pH: 5.0
- Viscosity: 1000 cP
- Glass Transition Temp, Tg: 30.0 °C
- FDA: Yes
$ 1530/MT
- Density: 1.71 g/cc
- Linear Mold Shrinkage, Flow: 0.000500 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00500 cm/cm
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 1.10 %
$ 1649/MT
- Specific Gravity: 1.54 g/cc
- Density: 1.502 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.800 %
- Linear Mold Shrinkage, Flow: 0.00400 cm/cm
$ 1751/MT
- Vinyl Acetate Content: 20 %
- Melt Flow: 20 g/10 min
$ 1872/MT
- Density: 1.55 g/cc
- Moisture Absorption: 0.150 %
- Viscosity Test: 80.0 cm³/g
- Melt Flow: 10.0 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 50.0 MPa
$ 2058/MT
- Density: 1.41 g/cc
- Density of Compound: 1.20 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
$ 2321/MT
- Density: 1.59 g/cc
- Tensile Strength at Break: 177 MPa
- Elongation at Break: 2.35 %
- Tensile Modulus: 10.3 GPa
- Flexural Strength: 265 MPa
$ 2582/MT
- Specific Gravity: 1.69 g/cc
- Density: 1.69 g/cc
- Linear Mold Shrinkage, Flow: 0.000500 - 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00100 - 0.00200 cm/cm
- Tensile Strength at Break: 250 MPa
$ 1764/MT
- Density: 1.65 g/cc
- Water Absorption at Saturation: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.00200 - 0.00600 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 - 0.00600 cm/cm
- Hardness, Rockwell M: 100
$ 1794/MT
- Specific Gravity: 1.54 g/cc
- Density: 1.54 g/cc
- Water Absorption: 0.0500 % @Temperature 22.8 °C
- Moisture Absorption: 0.170 %
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00600 cm/cm
$ 1674/MT
- Density: 1.27 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 1.2 %
- Melt Flow: 1.78 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 80.0 MPa
$ 1552/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Water Absorption: 0.090 % @Temperature 22.8 °C
- Linear Mold Shrinkage, Flow: 0.018 - 0.020 cm/cm
- Linear Mold Shrinkage, Flow: 0.018 - 0.020 cm/cm
$ 2272/MT
- Specific Gravity: 1.29 g/cc
- Density: 1.27 g/cc
- Water Absorption: 0.100 % @Temperature 22.8 °C
- Viscosity: 461200 cP
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
$ 1617/MT
- Density: 1.74 g/cc
- Moisture Absorption: 0.150 %
- Viscosity Test: 50.0 cm³/g
- Linear Mold Shrinkage, Flow: 0.00200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00600 cm/cm
$ 2113/MT
- Density: 1.67 g/cc
- Water Absorption at Saturation: 0.020 %
- Linear Mold Shrinkage: 0.0020 - 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm
- Hardness, Rockwell M: 100
$ 2426/MT
- Density: 0.934 g/cc
- Vinyl Acetate Content: 19 %
- Melt Flow: 30 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 4.00 MPa
- Film Tensile Strength at Yield, TD: 4.00 MPa
$ 1495/MT
- Density: 1.22 g/cc
- Tensile Strength at Break: 135 MPa
- Tensile Strength: 76.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.00 %
- Elongation at Break: 2.30 % @Temperature 80.0 °C
$ 1753/MT
- Density: 1.44 g/cc
- Linear Mold Shrinkage, Flow: 0.00800 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0100 cm/cm
- Melt Flow: 12.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: 70.0 MPa
$ 1911/MT
- Solids Content: 47 %
- Particle Size: 200 µm
- pH: 6.5
- Viscosity: 50 cP
- Glass Transition Temp, Tg: 30.0 °C
$ 1911/MT
- Density: 1.65 g/cc
- Water Absorption: 0.040 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Hardness, Rockwell M: 86
- Tensile Strength, Ultimate: 107 MPa
$ 1482/MT
- Specific Gravity: 1.52 g/cc
- Density: 1.51 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0040 cm/cm
- Tensile Strength at Break: 85.0 MPa
- Tensile Strength at Break: 86.2 MPa @Temperature 22.8 °C
$ 2217/MT
- Specific Gravity: 1.55 g/cc
- Density: 1.55 g/cc
- Moisture Absorption at Equilibrium: 0.19 %
- Linear Mold Shrinkage, Flow: 0.00 - 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 - 0.0080 cm/cm
$ 2355/MT
- Density: 1.74 g/cc
- Water Absorption: 0.11 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Hardness, Rockwell M: 50
- Tensile Strength, Ultimate: 85.0 MPa
$ 1588/MT
- Specific Gravity: 1.74 g/cc
- Density: 1.74 g/cc
- Water Absorption: 0.10 % @Temperature 22.8 °C
- Hardness, Rockwell M: 43
- Tensile Strength at Break: 80.0 MPa
$ 1531/MT
- Density: 1.74 g/cc
- Water Absorption: 0.040 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Hardness, Rockwell M: 76
- Tensile Strength, Ultimate: 90.0 MPa
$ 1831/MT
- Density: 1.69 g/cc
- Linear Mold Shrinkage, Flow: 0.0025 - 0.0045 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.0080 cm/cm
- Tensile Strength at Break: 79.0 MPa
- Elongation at Break: 1.0 %
$ 1546/MT
- Density: 1.66 g/cc
- Moisture Absorption: 0.200 %
- Viscosity Test: 70.0 cm³/g
- Linear Mold Shrinkage, Flow: 0.00400 - 0.00600 cm/cm
- Tensile Strength at Break: 110 MPa
$ 1753/MT
- Specific Gravity: 1.52 g/cc
- Density: 1.51 g/cc
- Water Absorption: <= 0.100 % @Temperature 22.8 °C
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00400 cm/cm
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00600 cm/cm
$ 1519/MT
- Specific Gravity: 1.58 g/cc
- Density: 1.58 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Viscosity Test: 90 cm³/g
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm
$ 2208/MT
- Specific Gravity: 1.55 g/cc
- Density: 1.555 g/cc
- Moisture Absorption at Equilibrium: 0.19 %
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00 - 0.0050 cm/cm
$ 2030/MT
- Tensile Strength at Break: 100 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 8.20 GPa
- Charpy Impact, Notched: 0.520 J/cm²
- Melting Point: 225 °C
$ 1564/MT
- Specific Gravity: 1.69 g/cc
- Density: 1.69 g/cc
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.00250 - 0.00450 cm/cm
- Linear Mold Shrinkage, Flow: 0.00200 - 0.00500 cm/cm
$ 1721/MT
- Specific Gravity: 1.62 g/cc
- Density: 1.62 g/cc
- Water Absorption: 0.0700 % @Temperature 22.8 °C
- Moisture Absorption: 0.200 %
- Viscosity Test: 55.0 cm³/g
$ 2307/MT
- Density: 1.55 g/cc
- Linear Mold Shrinkage, Flow: 0.00500 - 0.00700 cm/cm
- Tensile Strength at Break: 109 MPa
- Tensile Strength at Break: 110 MPa
- Elongation at Break: 1.80 %
$ 1458/MT
- Specific Gravity: 1.60 g/cc
- Density: 0.000926 g/cc
- Density: 1.65 g/cc
- Water Absorption: 0.0200 % @Temperature 22.8 °C
- Water Absorption at Saturation: 0.0200 %
$ 1591/MT
- Specific Gravity: 1.21 g/cc
- Density: 1.21 g/cc
- Tensile Strength at Break: 102 MPa
- Tensile Strength at Break: 117 MPa
- Tensile Strength at Break: 72.4 MPa @Temperature 93.3 °C
$ 1657/MT
- Density: 0.950 g/cc
- Water Absorption: 0.00 %
- Viscosity Test: 3800 cm³/g
- Linear Mold Shrinkage: 0.020 - 0.030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.020 - 0.030 cm/cm
$ 1861/MT
- Density: 1.58 g/cc
- Moisture Absorption: 0.120 %
- Linear Mold Shrinkage, Flow: 0.000 - 0.00500 cm/cm
- Linear Mold Shrinkage, Flow: 0.0200 - 0.0400 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00600 - 0.00900 cm/cm
$ 1823/MT
- Density: 1.52 g/cc
- Linear Mold Shrinkage, Flow: 0.000 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00600 cm/cm
- Hardness, Rockwell M: 63.0
- Tensile Strength at Break: 175 MPa
$ 1598/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0190 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 66.0 MPa
$ 1506/MT
- Specific Gravity: 0.930 g/cc
- Density: 0.930 g/cc
- Density of Compound: 0.930 g/cc
- Moisture Absorption: <= 0.0100 %
- Water Absorption at Saturation: <= 0.0100 %
$ 1954/MT
- Specific Gravity: 1.76 g/cc
- Density: 1.76 g/cc
- Linear Mold Shrinkage, Flow: 0.000500 - 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.000500 - 0.00100 cm/cm
- Tensile Strength at Break: 240 MPa
$ 1456/MT
- Density: 1.57 g/cc
- Viscosity Test: 132 cm³/g
- Tensile Strength at Break: 250 MPa
- Tensile Strength: 165 MPa @Temperature 80.0 °C
- Elongation at Break: 2.00 %
$ 1613/MT
- Solids Content: 47 %
- Particle Size: 115 µm
- pH: 8.5
- Viscosity: <= 300 cP
- Glass Transition Temp, Tg: -0.4375 °C
$ 1566/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.750 %
- Melt Flow: 2.20 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 64.0 MPa
- Elongation at Yield: 12.0 %
$ 2388/MT
- Density: 1.47 g/cc
- Linear Mold Shrinkage: 0.0070 - 0.010 cm/cm
- Tensile Strength, Ultimate: 42.0 MPa
- Elongation at Break: 1.45 %
- Tensile Modulus: 6.00 GPa
$ 1654/MT
- Specific Gravity: 1.65 g/cc
- Density: 1.67 g/cc
- Moisture Absorption at Equilibrium: 0.16 %
- Viscosity Test: 85 cm³/g
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
$ 1719/MT
- Specific Gravity: 1.49 g/cc
- Density: 1.49 g/cc
- Moisture Absorption: 0.150 %
- Linear Mold Shrinkage, Flow: 0.00300 cm/cm
- Linear Mold Shrinkage, Flow: 0.00200 - 0.00400 cm/cm
$ 1630/MT
- Density: 1.60 g/cc
- Water Absorption: 0.020 %
- Linear Mold Shrinkage, Flow: 0.0025 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Hardness, Rockwell M: 100
$ 1813/MT
- Density: 1.63 g/cc
- Linear Mold Shrinkage, Flow: 0.000500 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00730 cm/cm
- Tensile Strength at Break: 145 MPa
- Elongation at Break: 3.50 %
$ 1983/MT
- Density: 1.74 g/cc
- Linear Mold Shrinkage, Flow: 0.000700 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00370 cm/cm
- Tensile Strength at Break: 105 MPa
- Elongation at Break: 3.30 %
$ 2070/MT
- Density: 0.949 g/cc
- Vinyl Acetate Content: 26 %
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 84
- Hardness, Shore D: 23
$ 1614/MT
- Density: 1.22 g/cc
- Tensile Strength at Break: 130 MPa
- Tensile Strength: 65.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.00 %
- Elongation at Break: 2.40 % @Temperature 80.0 °C
$ 1582/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.750 %
- Linear Mold Shrinkage, Flow: 0.0210 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0200 cm/cm
- Melt Flow: 1.70 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1645/MT
- Density: 1.70 g/cc
- Water Absorption at Saturation: 0.0200 %
- Tensile Strength at Break: 165 MPa
- Elongation at Break: 1.60 %
- Tensile Modulus: 14.4 GPa
$ 1751/MT
- Density: 1.43 g/cc
- Tensile Strength at Break: 145 MPa
- Tensile Strength: 85.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.00 %
- Elongation at Break: 2.00 % @Temperature 80.0 °C
$ 2199/MT
- Density: 1.42 g/cc
- Tensile Strength, Yield: 59.0 MPa
- Flexural Modulus: 2.47 GPa
- Izod Impact, Notched (ISO): 4.30 kJ/m²
- Deflection Temperature at 1.8 MPa (264 psi): 99.0 °C
$ 2082/MT
- Density: 1.46 g/cc
- Linear Mold Shrinkage, Flow: 0.0105 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00950 cm/cm
- Melt Flow: 1.10 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: 105 MPa
$ 1588/MT
- Density: 1.75 g/cc
- Density of Compound: 1.48 g/cc
- Linear Mold Shrinkage, Flow: 0.000900 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00500 cm/cm
- Tensile Strength at Break: 115 MPa
$ 1644/MT
- Density of Compound: 0.940 g/cc
- Viscosity Test: 300 cm³/g
- Melt Flow: 3.50 g/10 min
- Tensile Strength, Yield: 19.0 MPa
- Elongation at Break: >= 50.0 %
$ 1529/MT
- Density: 1.42 g/cc
- Melt Flow: 12.5 g/10 min
- Tensile Strength, Yield: 63.0 MPa
- Tensile Modulus: 2.84 GPa
- Charpy Impact, Notched: 0.650 J/cm²
$ 2114/MT
- Density: 1.56 g/cc
- Viscosity Test: 134 cm³/g
- Tensile Strength at Break: 250 MPa
- Elongation at Break: 2.00 %
- Tensile Modulus: 16.45 GPa
$ 1800/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.53 g/cc
- Moisture Absorption: 0.140 %
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
$ 1513/MT
- Density: 1.42 g/cc
- Water Absorption at Saturation: 0.750 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 8.50 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1723/MT
- Specific Gravity: 1.20 g/cc
- Density: 1.20 g/cc
- Linear Mold Shrinkage, Flow: 0.00500 - 0.00900 cm/cm
- Linear Mold Shrinkage, Flow: 0.00500 - 0.00900 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00500 - 0.00900 cm/cm
$ 1810/MT
- Density: 1.39 g/cc
- Water Absorption: 0.65 %
- Linear Mold Shrinkage, Flow: 0.019 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1931/MT
- Density: 0.9115 g/cc
- Melt Flow: 400 g/10 min @Load 0.325 kg, Temperature 125 °C
- Hardness, Shore A: 95
- Tensile Strength at Break: 7.50 MPa
- Elongation at Break: 110 %
$ 1676/MT
- Solids Content: 55 %
- Viscosity: 2000 - 2600 cP
- Glass Transition Temp, Tg: 30.0 °C
- Colloid: PVOH
$ 1752/MT
- Specific Gravity: 1.62 g/cc
- Density: 1.58 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0150 cm/cm
$ 1686/MT
- Density: 1.60 g/cc
- Water Absorption: 0.020 %
- Linear Mold Shrinkage, Flow: 0.0025 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Hardness, Rockwell M: 100
$ 1829/MT
- Density: 1.13 g/cc
- Tensile Strength at Break: 96.0 MPa
- Elongation at Break: 2.20 %
- Tensile Modulus: 6.36 GPa
- Flexural Strength: 165 MPa
$ 1580/MT
- Density: 1.38 g/cc
- Water Absorption: 0.030 %
- Linear Mold Shrinkage: 0.0030 - 0.0040 cm/cm
- Tensile Strength, Ultimate: 25.0 MPa
- Elongation at Break: 0.69 %
$ 1941/MT
- Density: 1.45 g/cc
- Linear Mold Shrinkage, Flow: 0.00400 - 0.00800 cm/cm
- Tensile Strength at Break: 96.5 MPa
- Tensile Strength at Break: 105 MPa
- Elongation at Break: 4.00 %
$ 1549/MT
- Density: 1.40 g/cc
- Moisture Absorption: 0.00300 %
- Water Absorption at Saturation: 0.00600 %
- Linear Mold Shrinkage, Flow: 0.000 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00700 cm/cm
$ 2015/MT
- Specific Gravity: 1.12 g/cc
- Density: 1.12 g/cc
- Tensile Strength at Break: 92.0 MPa
- Tensile Strength at Break: 108 MPa
- Tensile Strength at Break: 66.9 MPa @Temperature 93.3 °C
$ 1468/MT
- Specific Gravity: 1.50 g/cc
- Density: 1.50 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Linear Mold Shrinkage, Flow: 0.010 - 0.014 cm/cm
- Linear Mold Shrinkage, Flow: 0.010 - 0.014 cm/cm
$ 1610/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.750 %
- Linear Mold Shrinkage, Flow: 0.0220 cm/cm
$ 1654/MT
- Density: 1.33 g/cc
- Tensile Strength at Break: 107 MPa
- Elongation at Break: 1.70 %
- Tensile Modulus: 11.0 GPa
- Flexural Strength: 181 MPa
$ 1465/MT
- Specific Gravity: 1.47 g/cc
- Density: 1.47 g/cc
- Water Absorption: 0.110 % @Temperature 22.8 °C
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
$ 1892/MT
- Density: 0.937 g/cc
- Vinyl Acetate Content: 18 %
- Melt Flow: 1.6 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 93
- Hardness, Shore D: 37
$ 2452/MT
- Specific Gravity: 0.930 g/cc
- Density: 0.930 g/cc
- Density of Compound: 0.930 g/cc
- Moisture Absorption: <= 0.0100 %
- Water Absorption at Saturation: <= 0.0100 %
$ 1629/MT
- Density: 1.48 g/cc
- Tensile Strength at Break: 115 MPa
- Elongation at Break: 2.7 %
- Tensile Modulus: 7.20 GPa
- Flexural Strength: 172 MPa
$ 2244/MT
- Density: 1.12 g/cc
- Tensile Strength at Break: 100 MPa
- Tensile Strength: 63.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.50 %
- Elongation at Break: 3.30 % @Temperature 80.0 °C
$ 1597/MT
- Vinyl Acetate Content: 18 %
- Melt Flow: 0.70 g/10 min
$ 2040/MT
- Density: 1.62 g/cc
- Moisture Absorption: 0.0400 %
- Linear Mold Shrinkage, Flow: 0.00200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 cm/cm
- Hardness, Rockwell M: 85.0
$ 1884/MT
- Density: 0.952 g/cc
- Vinyl Acetate Content: 28 %
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 81
- Hardness, Shore D: 28
$ 1608/MT
- Density: 1.67 g/cc
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 3.8 %
- Tensile Modulus: 8.50 GPa
- Flexural Strength: 135 MPa
$ 1540/MT
- Solids Content: 49.5 %
- Viscosity: 4000 - 6000 cP
- Glass Transition Temp, Tg: 34.0 °C
- Colloid: PVOH
$ 1623/MT
- Solids Content: 49.5 %
- Viscosity: 4000 - 6000 cP
- Glass Transition Temp, Tg: 34.0 °C
- Colloid: PVOH
$ 2392/MT
- Solids Content: 49.5 %
- Viscosity: 4000 - 6000 cP
- Glass Transition Temp, Tg: 34.0 °C
- Colloid: PVOH
$ 1452/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Water Absorption: 0.0500 % @Temperature 22.8 °C
- Moisture Absorption: 0.200 %
- Viscosity Test: 69.0 cm³/g
$ 1562/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
- Melt Flow: 20.0 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength, Yield: 60.0 MPa
- Tensile Strength, Yield: 30.0 MPa @Strain 50.0 %
$ 1591/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
- Melt Flow: 20.0 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength, Yield: 60.0 MPa
- Tensile Strength, Yield: 30.0 MPa @Strain 50.0 %
$ 2333/MT
- Density: 0.930 g/cc
- Vinyl Acetate Content: 9 %
- Melt Flow: 1.5 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 96
- Hardness, Shore D: 47
$ 2536/MT
- Density: 1.60 g/cc
- Water Absorption: 0.090 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Hardness, Rockwell M: 72
- Tensile Strength, Ultimate: 85.0 MPa
$ 2123/MT
- Density: 1.39 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 20.0 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1456/MT
- Density: 1.37 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0180 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0170 cm/cm
- Melt Flow: 19.0 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1823/MT
- Density: 1.33 g/cc
- Water Absorption at Saturation: 1.00 %
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 4.00 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1749/MT
- Density: 1.39 g/cc
- Water Absorption at Saturation: 0.800 %
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 6.50 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1481/MT
- Density: 1.38 g/cc
- Water Absorption at Saturation: 0.650 %
- Melt Flow: 7.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 49.0 MPa
- Elongation at Yield: 12.0 %
$ 1451/MT
- Density: 1.38 g/cc
- Linear Mold Shrinkage, Flow: 0.0210 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0190 cm/cm
- Melt Flow: 13.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 49.0 MPa
$ 1826/MT
- Density: 1.33 g/cc
- Water Absorption at Saturation: 0.800 %
- Linear Mold Shrinkage, Flow: 0.0140 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0120 cm/cm
- Melt Flow: 1.00 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1496/MT
- Density: 1.33 g/cc
- Water Absorption at Saturation: 1.00 %
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 4.00 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1541/MT
- Density: 1.26 g/cc
- Water Absorption at Saturation: 1.20 %
- Linear Mold Shrinkage, Flow: 0.0170 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0160 cm/cm
- Melt Flow: 1.40 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1600/MT
- Density: 1.26 g/cc
- Water Absorption at Saturation: 1.20 %
- Linear Mold Shrinkage, Flow: 0.0170 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0160 cm/cm
- Melt Flow: 1.40 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1471/MT
- Density: 1.38 g/cc
- Water Absorption at Saturation: 0.800 %
- Linear Mold Shrinkage, Flow: 0.0180 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0160 cm/cm
- Melt Flow: 5.50 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1658/MT
- Density: 1.38 g/cc
- Water Absorption at Saturation: 0.800 %
- Linear Mold Shrinkage, Flow: 0.0180 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0160 cm/cm
- Melt Flow: 5.50 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1903/MT
- Density: 1.37 g/cc
- Water Absorption at Saturation: 0.800 %
- Melt Flow: 0.600 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 43.0 MPa
- Elongation at Yield: 16.0 %
$ 1949/MT
- Density: 1.32 g/cc
- Water Absorption at Saturation: 0.800 %
- Linear Mold Shrinkage, Flow: 0.0120 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0110 cm/cm
- Melt Flow: 2.00 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1721/MT
- Density: 1.37 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0180 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0170 cm/cm
- Melt Flow: 18.0 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 2284/MT
- Density: 1.39 g/cc
- Water Absorption at Saturation: 0.700 %
- Melt Flow: 21.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 46.0 MPa
- Elongation at Break: 35.0 %
$ 1450/MT
- Density: 1.03 g/cc
- Tensile Strength at Break: 89.0 MPa
- Elongation at Break: 2.40 %
- Tensile Modulus: 4.99 GPa
- Flexural Strength: 137 MPa
$ 1450/MT
- Density: 1.296 g/cc
- Tensile Strength at Break: 125 MPa
- Tensile Strength: 103 MPa @Temperature 80.0 °C
- Elongation at Break: 1.60 %
- Elongation at Break: 2.60 % @Temperature 80.0 °C
$ 1982/MT
- Density: 1.61 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 - 0.0090 cm/cm
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 2.4 %
$ 2116/MT
- Density: 1.41 g/cc
- Tensile Strength, Yield: 52.0 MPa
- Tensile Modulus: 2.37 GPa
- Flexural Modulus: 2.35 GPa
- Izod Impact, Notched (ISO): 5.00 kJ/m²
$ 2295/MT
- Density: 1.41 g/cc
- Tensile Strength, Yield: 52.0 MPa
- Tensile Modulus: 2.37 GPa
- Flexural Modulus: 2.35 GPa
- Izod Impact, Notched (ISO): 5.00 kJ/m²
$ 1459/MT
- Density: 1.46 g/cc
- Moisture Absorption at Equilibrium: 0.19 %
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Linear Mold Shrinkage, Transverse: 0.015 cm/cm
- Tensile Strength at Break: 46.0 MPa
$ 1456/MT
- Density: 0.933 g/cc
- Vinyl Acetate Content: 9.0 %
- Melt Flow: 1.1 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 95
- Hardness, Shore D: 43
$ 2191/MT
- Density: 0.962 g/cc
- Vinyl Acetate Content: 40 %
- Melt Flow: 55 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 53
- Tensile Strength at Break: 5.00 MPa
$ 1663/MT
- Density: 1.39 g/cc
- Water Absorption: 0.65 %
- Linear Mold Shrinkage, Flow: 0.019 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1483/MT
- Specific Gravity: 1.60 g/cc
- Density: 1.57 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.750 %
- Linear Mold Shrinkage, Flow: 0.0150 cm/cm
$ 1566/MT
- Density: 1.70 g/cc
- Water Absorption: 0.50 %
- Tensile Strength, Ultimate: 86.0 MPa
- Elongation at Break: 1.0 %
- Tensile Modulus: 10.0 GPa
$ 1863/MT
- Density: 1.56 g/cc
- Tensile Strength at Break: 260 MPa
- Tensile Strength: 150 MPa @Temperature 80.0 °C
- Elongation at Break: 2.2 %
- Elongation at Break: 2.8 % @Temperature 80.0 °C
$ 1963/MT
- Solids Content: 54.5 %
- Viscosity: 1800 - 2700 cP
- Glass Transition Temp, Tg: 0.000 °C
- Colloid: PVOH
$ 1856/MT
- Density: 1.41 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.65 %
- Melt Flow: 16.92 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 143 MPa
$ 1445/MT
- Density: 0.938 g/cc
- Vinyl Acetate Content: 16.3 %
- Melt Flow: 8.4 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 92
- Hardness, Shore D: 36
$ 1787/MT
- Density: 1.70 g/cc
- Filler Content: 40 %
- Tensile Strength at Break: 117 MPa
- Elongation at Break: 1.35 %
- Tensile Modulus: 13.0 GPa @Temperature 23.0 °C
$ 2533/MT
- Specific Gravity: 1.15 g/cc
- Density: 0.000657 g/cc
- Density: 1.13 g/cc
- Water Absorption: 0.500 % @Temperature 22.8 °C
- Viscosity: 351100 cP
$ 1991/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.65 %
- Tensile Strength, Yield: 63.0 MPa
- Elongation at Break: 30 %
- Elongation at Yield: 9.0 %
$ 1530/MT
- Density: 0.930 g/cc
- Vinyl Acetate Content: 9.0 %
- Thickness: 75.0 microns
- Melt Flow: 1.5 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 8.00 MPa
$ 1754/MT
- Density: 1.64 g/cc
- Moisture Absorption at Equilibrium: 0.090 %
- Linear Mold Shrinkage, Flow: 0.0010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm
- Tensile Strength at Break: 40.0 MPa
$ 1494/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Water Absorption: 0.0800 % @Temperature 22.8 °C
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
$ 1451/MT
- Density: 1.85 g/cc
- Filler Content: 50 %
- Tensile Strength at Break: 88.0 MPa
- Tensile Strength, Ultimate: 76.0 MPa @Temperature 23.0 °C
- Elongation at Break: 1.4 %
$ 1686/MT
- Density: 1.41 g/cc
- Density of Compound: 1.20 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
$ 1554/MT
- Density: 0.937 g/cc
- Vinyl Acetate Content: 18 %
- Melt Flow: 1.6 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 93
- Hardness, Shore D: 37
$ 1541/MT
- Rear Barrel Temperature: 270 - 310 °C
- Middle Barrel Temperature: 310 - 315 °C
- Front Barrel Temperature: 310 - 320 °C
- Nozzle Temperature: 310 - 330 °C
- Melt Temperature: 307 - 327 °C
$ 1691/MT
- Density: 1.65 g/cc
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Hardness, Rockwell M: 43
- Tensile Strength at Break: 150 MPa
$ 1623/MT
- Density: 1.63 g/cc
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
- Hardness, Rockwell M: 65
- Tensile Strength at Break: 92.0 MPa
$ 1837/MT
- Density: 1.13 g/cc
- Tensile Strength at Break: 95.0 MPa
- Tensile Strength: 50.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.40 %
- Elongation at Break: 3.00 % @Temperature 80.0 °C
$ 2312/MT
- Density: 1.42 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1969/MT
- Density: 1.05 g/cc
- Solids Content: >= 50 %
- pH: 8.0
- Viscosity: 400 cP
- Glass Transition Temp, Tg: 50.0 °C
$ 2313/MT
- Solids Content: 55 %
- Particle Size: 300 µm
- pH: 5.0
- Viscosity: 300 - 1000 cP
- Glass Transition Temp, Tg: 20.0 °C
$ 1674/MT
- Density: 1.48 g/cc
- Linear Mold Shrinkage, Flow: 0.0145 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0100 cm/cm
- Melt Flow: 3.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: 110 MPa
$ 2351/MT
- Density: 0.922 g/cc
- Melt Flow: 0.80 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore D: 52
- Tensile Strength at Break: 20.0 MPa
- Elongation at Break: 600 %
$ 1638/MT
- Density: 0.938 g/cc
- Vinyl Acetate Content: 18 %
- Thickness: 75.0 microns
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 4.00 MPa
$ 2499/MT
- Density: 1.49 g/cc
- Tensile Strength at Break: 130 MPa
- Flexural Modulus: 23.0 GPa
- Izod Impact, Notched (ISO): 13.0 kJ/m²
- Melting Point: 280 °C
- Deflection Temperature at 1.8 MPa (264 psi): 225 °C
$ 2364/MT
- Density: 1.70 g/cc
- Water Absorption: <= 0.10 %
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Tensile Strength, Ultimate: 69.0 MPa
- Elongation at Break: 0.60 %
$ 1545/MT
- Density: 1.13 g/cc
- Tensile Strength at Break: 110 MPa
- Tensile Strength: 70.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.20 %
- Elongation at Break: 2.30 % @Temperature 80.0 °C
$ 2075/MT
- Density: 1.65 g/cc
- Linear Mold Shrinkage, Flow: 0.000500 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00430 cm/cm
- Tensile Strength at Break: 110 MPa
- Elongation at Break: 2.60 %
$ 1504/MT
- Density: 1.38 g/cc
- Tensile Strength at Break: 285 MPa
- Elongation at Break: 1.35 %
- Tensile Modulus: 27.6 GPa
- Flexural Strength: 420 MPa
$ 1808/MT
- Density: 1.65 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm
- Hardness, Rockwell M: 67
- Tensile Strength at Break: 160 MPa
$ 1689/MT
- Density: 1.60 g/cc
- Linear Mold Shrinkage: 0.0010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Hardness, Rockwell M: 60
- Tensile Strength at Break: 140 MPa
$ 2049/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.00500 - 0.00700 cm/cm
- Linear Mold Shrinkage, Flow: 0.00500 - 0.00700 cm/cm
$ 1556/MT
- Density: 1.40 g/cc
- Linear Mold Shrinkage, Flow: 0.0180 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 65.0 MPa
$ 1570/MT
- Specific Gravity: 1.72 g/cc
- Density: 1.72 g/cc
- Linear Mold Shrinkage, Flow: 0.00100 - 0.00200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00300 - 0.00400 cm/cm
- Tensile Strength at Break: 165 MPa
$ 1636/MT
- Density: 1.79 g/cc
- Linear Mold Shrinkage, Flow: 0.00400 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0120 cm/cm
- Tensile Strength at Break: 89.0 MPa
- Elongation at Break: 3.20 %
$ 1503/MT
- Density: 1.44 g/cc
- Melt Flow: 8.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 58.0 MPa
- Elongation at Break: 28.0 %
- Elongation at Yield: 9.00 %
$ 1590/MT
- Density: 1.41 g/cc
- Melt Flow: 24.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 66.0 MPa
- Elongation at Yield: 7.00 %
- Tensile Modulus: 2.75 GPa
$ 1648/MT
- Density: 1.42 g/cc
- Linear Mold Shrinkage, Flow: 0.0210 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0190 cm/cm
- Melt Flow: 4.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 53.0 MPa
$ 1535/MT
- Density: 1.14 g/cc
- Water Absorption: 0.10 %
- Linear Mold Shrinkage: 0.0135 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0135 cm/cm
- Tensile Strength, Ultimate: 19.0 MPa
$ 1633/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Tensile Strength, Yield: 65.0 MPa
- Flexural Modulus: 2.52 GPa
$ 1728/MT
- Density: 1.46 g/cc
- Moisture Absorption: 0.190 %
- Linear Mold Shrinkage, Flow: 0.0150 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0150 cm/cm
- Tensile Strength at Break: 46.0 MPa
$ 1816/MT
- Density: 1.47 g/cc
- Moisture Absorption: 0.150 %
- Viscosity Test: 73.0 cm³/g
- Melt Flow: 19.0 g/10 min @Load 2.16 kg, Temperature 265 °C
- Tensile Strength at Break: 135 MPa
$ 1925/MT
- Density: 1.45 g/cc
- Linear Mold Shrinkage, Flow: 0.00400 - 0.00600 cm/cm
- Tensile Strength at Break: 95.0 MPa
- Elongation at Break: 1.80 %
- Tensile Modulus: 6.40 GPa
$ 1524/MT
- Density: 1.40 g/cc
- Moisture Absorption at Equilibrium: 0.020 %
- Moisture Vapor Transmission: 0.00606 cc-mm/m²-24hr-atm
- Oxygen Transmission: 0.0154 cc-mm/m²-24hr-atm
- Oxygen Transmission: 0.0165 cc-mm/m²-24hr-atm
$ 1650/MT
- Density: 1.47 g/cc
- Tensile Strength at Break: 145 MPa
- Tensile Strength: 86.0 MPa @Temperature 80.0 °C
- Elongation at Break: 1.60 %
- Elongation at Break: 2.00 % @Temperature 80.0 °C
$ 2083/MT
- Density: 1.13 g/cc
- Tensile Strength at Break: 95.0 MPa
- Tensile Strength: 50.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.40 %
- Elongation at Break: 3.30 % @Temperature 80.0 °C
$ 1510/MT
- Density: 1.22 g/cc
- Tensile Strength at Break: 134 MPa
- Tensile Strength: 70.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.0 %
- Elongation at Break: 2.4 % @Temperature 80.0 °C
$ 2042/MT
- Density: 1.63 g/cc
- Linear Mold Shrinkage, Flow: 0.00200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 cm/cm
- Hardness, Rockwell M: 85.0
- Tensile Strength at Break: 140 MPa
$ 1621/MT
- Density: 1.013 g/cc
- Linear Mold Shrinkage, Flow: 0.00470 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00700 cm/cm
- Tensile Strength at Break: 111 MPa
- Elongation at Break: 2.90 %
$ 1474/MT
- Density: 1.41 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.750 %
- Linear Mold Shrinkage, Flow: 0.0170 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0160 cm/cm
$ 1509/MT
- Density: 1.40 g/cc
- Tensile Strength at Break: 140 MPa
- Flexural Modulus: 9.10 GPa
- Izod Impact, Notched (ISO): 95.0 kJ/m²
- Melting Point: 280 °C
$ 1493/MT
- Specific Gravity: 1.66 g/cc
- Density: 1.66 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage, Flow: 0.0012 cm/cm @Thickness 2.00 mm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm @Thickness 2.00 mm
$ 1711/MT
- Specific Gravity: 1.39 g/cc
- Density: 1.38 g/cc
- Filler Content: 20 %
- Hardness, Rockwell M: 72
- Tensile Strength at Break: 100 MPa
$ 1599/MT
- Density: 1.44 g/cc
- Melt Flow: 21.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 58.0 MPa
- Elongation at Break: 25.0 %
- Tensile Modulus: 2.60 GPa
$ 2216/MT
- Density: 1.77 g/cc
- Linear Mold Shrinkage, Flow: 0.000 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00500 cm/cm
- Tensile Strength at Break: 118 MPa
- Elongation at Break: 2.00 %
$ 1484/MT
- Density: 1.25 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.015 cm/cm
- Tensile Strength, Ultimate: 1.40 MPa
- Elongation at Break: 46 %
- Tensile Modulus: 0.0120 GPa
$ 1604/MT
- Density: 1.35 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.010 cm/cm
- Melt Flow: 17 g/10 min
- Tensile Strength at Break: 66.9 MPa
- Tensile Strength at Break: 78.0 MPa
$ 1921/MT
- Specific Gravity: 1.264 g/cc
- Density: 1.25 g/cc
- Water Absorption: 0.0300 % @Temperature -17.8 °C
- Water Absorption at Saturation: 0.0350 %
- Linear Mold Shrinkage, Flow: 0.00900 - 0.0140 cm/cm
$ 2001/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0160 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 49.0 MPa
$ 2220/MT
- Density: 0.924 g/cc
- Melt Flow: 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 97
- Hardness, Shore D: 52
- Tensile Strength at Break: 20.0 MPa
$ 2069/MT
- Specific Gravity: 1.52 g/cc
- Density: 1.53 g/cc
- Water Absorption: 0.10 % @Temperature 22.8 °C
- Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm
- Melt Flow: 7.0 g/10 min
$ 1732/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.35 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm
- Tensile Strength at Break: 77.0 MPa
$ 2367/MT
- Density: 1.62 g/cc
- Linear Mold Shrinkage, Flow: 0.00300 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00900 cm/cm
- Tensile Strength at Break: 73.0 MPa
- Elongation at Break: 1.70 %
$ 1559/MT
- Density: 1.60 g/cc
- Water Absorption: 1.2 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm
- Tensile Strength, Ultimate: 50.0 MPa
$ 1757/MT
- Specific Gravity: 1.61 g/cc
- Density: 1.61 g/cc
- Water Absorption: 0.0700 % @Temperature 22.8 °C
- Moisture Absorption: 0.120 %
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
$ 1708/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.70 %
- Linear Mold Shrinkage, Flow: 0.019 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Tensile Strength, Yield: 63.0 MPa
$ 2527/MT
- Density: 1.44 g/cc
- Moisture Absorption: 0.150 %
- Water Absorption at Saturation: 1.40 %
- Linear Mold Shrinkage, Flow: 0.00300 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00800 cm/cm
$ 1985/MT
- Specific Gravity: 1.61 g/cc
- Density: 1.61 g/cc
- Water Absorption: 0.0700 % @Temperature 22.8 °C
- Moisture Absorption: 0.120 %
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
$ 1888/MT
- Density: 1.74 g/cc
- Moisture Absorption: 0.00300 %
- Linear Mold Shrinkage, Flow: 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00900 cm/cm
- Tensile Strength at Break: 100 MPa
$ 1731/MT
- Solids Content: 45 %
- Particle Size: 120 µm
- pH: 8.5
- Viscosity: 500 cP
- Glass Transition Temp, Tg: 12.0 °C
$ 1761/MT
- Specific Gravity: 1.56 g/cc
- Density: 1.56 g/cc
- Linear Mold Shrinkage, Flow: 0.000500 - 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00200 - 0.00300 cm/cm
- Tensile Strength at Break: 245 MPa
$ 1563/MT
- Density: 1.33 g/cc
- Tensile Strength at Break: 115 MPa
- Elongation at Break: 1.80 %
- Tensile Modulus: 10.3 GPa
- Flexural Strength: 200 MPa
$ 1525/MT
- Density: 1.68 g/cc
- Water Absorption: 0.020 %
- Moisture Absorption at Equilibrium: 0.020 %
- Linear Mold Shrinkage: 0.0010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0030 cm/cm
$ 2271/MT
- Density: 1.77 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 1.5 %
$ 2439/MT
- Density: 1.52 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Hardness, Rockwell M: 87
- Tensile Strength at Break: 100 MPa
- Elongation at Break: 2.9 %
$ 1814/MT
- Specific Gravity: 1.58 g/cc
- Density: 1.57 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.800 %
- Linear Mold Shrinkage, Flow: 0.00400 cm/cm
$ 1660/MT
- Density: 1.39 g/cc
- Water Absorption: 0.21 %
- Moisture Absorption at Equilibrium: 0.80 %
- Linear Mold Shrinkage: 0.021 cm/cm
- Linear Mold Shrinkage, Transverse: 0.017 cm/cm
$ 1657/MT
- Specific Gravity: 2.00 g/cc
- Density: 0.00116 g/cc
- Density: 1.95 g/cc
- Water Absorption: 0.0300 % @Temperature 22.8 °C
- Water Absorption at Saturation: 0.0200 %
$ 1910/MT
- Density: 1.73 g/cc
- Linear Mold Shrinkage, Flow: 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00500 cm/cm
- Tensile Strength at Break: 115 MPa
- Elongation at Break: 1.40 %
$ 1616/MT
- Specific Gravity: 1.29 g/cc
- Density: 1.29 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 - 0.0090 cm/cm
$ 1636/MT
- Density: 1.40 g/cc
- Water Absorption at Saturation: 0.600 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0165 cm/cm
- Melt Flow: 13.0 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 2246/MT
- Density: 1.66 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm
- Tensile Strength at Break: 190 MPa
- Elongation at Break: 1.9 %
$ 2152/MT
- Density: 1.38 g/cc
- Water Absorption at Saturation: 0.80 %
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Yield: 12 %
- Tensile Modulus: 2.00 GPa
$ 1517/MT
- Density: 1.65 g/cc
- Tensile Strength at Break: 182 MPa
- Elongation at Break: 2.05 %
- Tensile Modulus: 11.99 GPa
- Flexural Strength: 285 MPa
$ 1530/MT
- Density: 1.35 g/cc
- Water Absorption at Saturation: 0.020 %
- Tensile Strength at Break: 65.0 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 4.00 GPa
$ 2416/MT
- Density: 1.26 g/cc
- Water Absorption at Saturation: 1.2 %
- Linear Mold Shrinkage, Flow: 0.017 cm/cm
- Linear Mold Shrinkage, Transverse: 0.016 cm/cm
- Tensile Strength, Yield: 33.0 MPa
$ 1665/MT
- Density: 1.07 g/cc
- Solids Content: >= 55 %
- pH: 4.5
- Viscosity: 2300 cP
- Glass Transition Temp, Tg: 10.0 °C
$ 1920/MT
- Specific Gravity: 1.51 g/cc
- Density: 1.50 g/cc
- Tensile Strength at Break: 91.0 MPa
- Tensile Strength at Break: 113 MPa
- Tensile Strength at Break: 49.0 MPa @Temperature 93.3 °C
$ 2234/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0250 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0240 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 64.0 MPa
$ 2156/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 12.0 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 2112/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Density of Compound: 1.20 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.750 %
$ 1620/MT
- Tensile Strength at Break: 145 MPa
- Tensile Modulus: 16.0 GPa
- Flexural Strength: 225 MPa
- Flexural Modulus: 15.5 GPa
- Melting Point: 335 °C
$ 1730/MT
- Density: 1.43 g/cc
- Tensile Strength at Break: 138 MPa
- Elongation at Break: 1.60 %
- Tensile Modulus: 14.2 GPa
- Flexural Strength: 235 MPa
$ 1563/MT
- Specific Gravity: 2.00 g/cc
- Density: 0.00115 g/cc
- Density: 1.95 g/cc
- Water Absorption: 0.0300 % @Temperature 22.8 °C
- Water Absorption at Saturation: 0.0200 %
$ 1949/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0250 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0200 cm/cm
- Melt Flow: 4.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 63.0 MPa
$ 1689/MT
- Density: 1.31 g/cc
- Water Absorption: 0.090 %
- Linear Mold Shrinkage, Flow: 0.019 cm/cm
- Hardness, Rockwell M: 75
- Tensile Strength, Yield: 60.0 MPa
$ 1628/MT
- Specific Gravity: 1.25 g/cc
- Density: 1.25 g/cc
- Water Absorption: 0.100 % @Temperature 22.8 °C
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0170 - 0.0220 cm/cm
$ 2212/MT
- Density: 1.65 g/cc
- Water Absorption at Saturation: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.00200 - 0.00600 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 - 0.00600 cm/cm
- Hardness, Rockwell M: 100
$ 2422/MT
- Density: 1.18 g/cc
- Water Absorption: 0.10 %
- Linear Mold Shrinkage: 0.0175 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0175 cm/cm
- Tensile Strength, Ultimate: 22.0 MPa
$ 2491/MT
- Density: 1.40 g/cc
- Moisture Absorption: 0.00300 %
- Water Absorption at Saturation: 0.00600 %
- Linear Mold Shrinkage, Flow: 0.000 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00700 cm/cm
$ 2280/MT
- Vinyl Acetate Content: 28 %
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 2054/MT
- Density: 1.21 g/cc
- Tensile Strength at Break: 100 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 7.90 GPa
- Flexural Strength: 175 MPa
$ 1752/MT
- Density: 1.40 g/cc
- Melt Flow: 2.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 63.0 MPa
- Elongation at Break: 32.0 %
- Elongation at Yield: 19.0 %
$ 2577/MT
- Specific Gravity: 1.45 g/cc
- Density: 1.45 g/cc
- Linear Mold Shrinkage, Flow: 0.00100 - 0.00200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00200 - 0.00300 cm/cm
- Tensile Strength at Break: 215 MPa
$ 1471/MT
- Solids Content: 62 %
- Viscosity: 1000 - 1800 cP
- Glass Transition Temp, Tg: 0.000 °C
- Colloid: PVOH
$ 1623/MT
- Density: 1.35 g/cc
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Break: 40 %
- Elongation at Yield: 8.5 %
- Tensile Modulus: 2.20 GPa
$ 1598/MT
- Density: 1.47 g/cc
- Moisture Absorption: 0.190 %
- Linear Mold Shrinkage, Flow: 0.000 - 0.00500 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00700 cm/cm
- Tensile Strength at Break: 95.1 MPa
$ 2006/MT
- Solids Content: 50 %
- Viscosity: 800 - 1500 cP
- Glass Transition Temp, Tg: -39.0 °C
- Colloid: Surfactant
$ 1801/MT
- Density: 1.44 g/cc
- Water Absorption at Saturation: 0.650 %
- Melt Flow: 8.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 58.0 MPa
- Elongation at Yield: 9.00 %
$ 2303/MT
- Density: 1.37 g/cc
- Water Absorption at Saturation: 0.800 %
- Melt Flow: 4.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 41.0 MPa
- Elongation at Yield: 20.0 %
$ 1490/MT
- Density: 1.67 g/cc
- Viscosity Test: 120 cm³/g
- Tensile Strength at Break: 270 MPa
- Tensile Strength: 150 MPa @Temperature 80.0 °C
- Elongation at Break: 2.0 %
$ 1884/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.750 %
- Linear Mold Shrinkage, Flow: 0.0220 cm/cm
$ 1663/MT
- Density: 1.52 g/cc
- Linear Mold Shrinkage, Flow: 0.00800 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00900 cm/cm
- Melt Flow: 1.50 g/10 min @Load 5.00 kg, Temperature 190 °C
- Tensile Strength at Break: 135 MPa
$ 1820/MT
- Density: 1.13 g/cc
- Tensile Strength at Break: 110 MPa
- Tensile Strength: 70.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.20 %
- Elongation at Break: 2.30 % @Temperature 80.0 °C
$ 1582/MT
- Density: 0.933 g/cc
- Vinyl Acetate Content: 9.0 %
- Thickness: 75.0 microns
- Melt Flow: 1.1 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 8.00 MPa
$ 1876/MT
- Density: 1.39 g/cc
- Water Absorption at Saturation: 0.700 %
- Melt Flow: 21.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 46.0 MPa
- Elongation at Break: 35.0 %
$ 1671/MT
- Density: 1.45 g/cc
- Tensile Strength at Break: 203 MPa
- Elongation at Break: 0.720 %
- Tensile Modulus: 31.848 GPa
- Flexural Strength: 339 MPa
$ 1611/MT
- Density: 1.41 g/cc
- Tensile Strength, Yield: 52.0 MPa
- Tensile Modulus: 2.37 GPa
- Flexural Modulus: 2.35 GPa
- Izod Impact, Notched (ISO): 5.00 kJ/m²
$ 1465/MT
- Density: 1.41 g/cc
- Tensile Strength, Yield: 52.0 MPa
- Tensile Modulus: 2.37 GPa
- Flexural Modulus: 2.35 GPa
- Izod Impact, Notched (ISO): 5.00 kJ/m²
$ 1703/MT
- Specific Gravity: 1.21 g/cc
- Density: 1.21 g/cc
- Tensile Strength at Break: 150 MPa
- Elongation at Break: 2.10 %
- Tensile Modulus: 10.0 GPa
$ 1614/MT
- Density: 1.71 g/cc
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm
- Hardness, Rockwell M: 69
- Tensile Strength at Break: 130 MPa
$ 1574/MT
- Density: 1.67 g/cc
- Viscosity Test: 120 cm³/g
- Tensile Strength at Break: 280 MPa
- Tensile Strength: 160 MPa @Temperature 80.0 °C
- Elongation at Break: 2.1 %
$ 2107/MT
- Density: 0.930 g/cc
- Density of Compound: 0.930 g/cc
- Moisture Absorption: <= 0.0100 %
- Viscosity Test: 2800 cm³/g
- Viscosity Test: 2800 cm³/g
$ 1614/MT
- Density: 1.60 g/cc
- Water Absorption: 1.2 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm
- Tensile Strength, Ultimate: 50.0 MPa
$ 1930/MT
- Density: 1.33 g/cc
- Tensile Strength at Break: 115 MPa
- Elongation at Break: 1.8 %
- Tensile Modulus: 10.3 GPa
- Flexural Strength: 200 MPa
$ 1838/MT
- Density: 1.39 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.65 %
- Melt Flow: 11.12 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 110 MPa
$ 1945/MT
- Density: 0.921 g/cc
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 95.5
- Hardness, Shore D: 47
- Tensile Strength at Break: 15.0 MPa
$ 1523/MT
- Solids Content: 50 %
- pH: 4.0
- Viscosity: 200 cP
- Glass Transition Temp, Tg: 15.0 °C
- FDA: Yes
$ 2547/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Water Absorption: 0.100 % @Temperature 22.8 °C
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.00600 - 0.00800 cm/cm
$ 1472/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.750 %
- Linear Mold Shrinkage, Flow: 0.0220 cm/cm
$ 1962/MT
- Density: 1.55 g/cc
- Filler Content: 40 %
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 1.8 %
- Tensile Modulus: 11.5 GPa @Temperature 23.0 °C
$ 1464/MT
- Tensile Strength at Break: 125 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 9.20 GPa
- Charpy Impact, Notched: 0.560 J/cm²
- Processing Temperature: 20.0 - 50.0 °C
$ 1978/MT
- Density: 1.07 g/cc
- Solids Content: >= 55 %
- pH: 4.5
- Viscosity: 2200 cP
- Glass Transition Temp, Tg: 18.0 °C
$ 1981/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
- Melt Flow: 40.0 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength, Yield: 60.0 MPa
- Elongation at Break: 15.0 %
$ 1459/MT
- Specific Gravity: 1.37 g/cc
- Density: 1.37 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0250 - 0.0280 cm/cm
- Linear Mold Shrinkage, Flow: 0.0250 - 0.0280 cm/cm
$ 2231/MT
- Density: 1.62 g/cc
- Moisture Absorption: 0.0400 %
- Linear Mold Shrinkage, Flow: 0.00200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 cm/cm
- Hardness, Rockwell M: 85.0
$ 2095/MT
- Specific Gravity: 1.54 g/cc
- Density: 1.54 g/cc
- Water Absorption: 0.0500 % @Temperature 22.8 °C
- Moisture Absorption: 0.200 %
- Viscosity Test: 68.0 cm³/g
$ 1852/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0260 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0220 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 65.0 MPa
$ 2121/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage, Flow: 0.0160 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0150 cm/cm
- Melt Flow: 13.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 41.0 MPa
$ 1615/MT
- Solids Content: 50 %
- pH: 4.0
- Viscosity: 200 cP
- Glass Transition Temp, Tg: 5.00 °C
- FDA: Yes
$ 1612/MT
- Density: 1.41 g/cc
- Melt Density: 1.20 g/cc
- Water Absorption: 0.65 %
- Melt Flow: 2.5 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Stress: 18.0 MPa @Strain 2.00 %, Temperature 80.0 °C
$ 1559/MT
- Density: 1.49 g/cc
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 2.80 %
- Flexural Strength: 190 MPa
$ 1777/MT
- Density: 1.13 g/cc
- Tensile Strength at Break: 110 MPa
- Tensile Strength: 70.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.20 %
- Elongation at Break: 2.00 % @Temperature 80.0 °C
$ 1630/MT
- Specific Gravity: 1.95 g/cc
- Density: 1.95 g/cc
- Water Absorption at Saturation: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.00200 - 0.00600 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00300 - 0.00700 cm/cm
$ 1759/MT
- Density: 1.62 g/cc
- Moisture Absorption: 0.00200 %
- Linear Mold Shrinkage, Flow: 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 cm/cm
- Hardness, Rockwell M: 55.0
$ 1458/MT
- Density: 1.49 g/cc
- Tensile Strength at Break: 67.0 MPa
- Tensile Modulus: 5.10 GPa
- Flexural Modulus: 4.10 GPa
- Charpy Impact, Notched: 0.290 J/cm²
$ 1703/MT
- Density: 1.01 g/cc
- Tensile Strength at Break: 88.0 MPa
- Elongation at Break: 2.8 %
- Tensile Modulus: 4.60 GPa
- Flexural Strength: 145 MPa
$ 1769/MT
- Density: 1.67 g/cc
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 3.8 %
- Tensile Modulus: 8.50 GPa
- Flexural Strength: 135 MPa
$ 1614/MT
- Density: 1.13 g/cc
- Water Absorption: <= 0.20 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Flow: 22 g/10 min
- Hardness, Shore D: 54
$ 1690/MT
- Density: 1.34 g/cc
- Tensile Strength, Yield: 37.0 MPa
- Tensile Modulus: 1.22 GPa
- Flexural Modulus: 1.20 GPa
- Izod Impact, Notched (ISO): 11.8 kJ/m²
$ 1468/MT
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 1.80 %
- Tensile Modulus: 15.0 GPa
- Flexural Strength: 180 MPa
- Flexural Modulus: 14.5 GPa
$ 1602/MT
- Density: 1.44 g/cc
- Water Absorption at Saturation: 0.0200 %
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 2.00 %
- Tensile Modulus: 7.70 GPa
$ 1452/MT
- Density: 1.38 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0210 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0190 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1857/MT
- Density: 1.62 g/cc
- Linear Mold Shrinkage, Flow: 0.00050 cm/cm @Thickness 2.00 mm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm @Thickness 2.00 mm
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 2.0 %
$ 1459/MT
- Density: 1.42 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.75 %
- Melt Flow: 12.07 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 140 MPa
$ 1570/MT
- Density: 1.39 g/cc
- Water Absorption at Saturation: 0.80 %
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Yield: 10 %
- Tensile Modulus: 2.30 GPa
$ 1901/MT
- Density: 1.28 g/cc
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
- Tensile Strength, Ultimate: 43.0 MPa
- Elongation at Break: 1.6 %
$ 1519/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.750 %
- Linear Mold Shrinkage, Flow: 0.0220 cm/cm
$ 2309/MT
- Density: 1.89 g/cc
- Moisture Absorption: 1.10 %
- Linear Mold Shrinkage, Flow: 0.000 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00100 cm/cm
- Tensile Strength at Break: 100 MPa
$ 1730/MT
- Density: 1.41 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.65 %
- Melt Flow: 11.28 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 144 MPa
$ 1812/MT
- Solids Content: 45 %
- pH: 3.0
- Viscosity: 150 cP
- Glass Transition Temp, Tg: 30.0 °C
- Crosslinking: Yes
$ 1600/MT
- Vinyl Acetate Content: 12 %
- Melt Flow: 0.35 g/10 min
$ 2103/MT
- Specific Gravity: 0.930 g/cc
- Density: 0.930 g/cc
- Density of Compound: 0.930 g/cc
- Moisture Absorption: <= 0.0100 %
- Water Absorption at Saturation: <= 0.0100 %
$ 1529/MT
- Specific Gravity: 1.60 g/cc
- Density: 0.000913 g/cc
- Density: 1.58 g/cc
- Water Absorption: 0.0300 % @Temperature 22.8 °C
- Water Absorption at Saturation: 0.0200 %
$ 2549/MT
- Density: 1.34 g/cc
- Tensile Strength at Break: 45.0 MPa
- Elongation at Break: 14.0 %
- Tensile Modulus: 3.30 GPa
- Charpy Impact Unnotched: 3.20 J/cm²
$ 1609/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Flow: 0.0220 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0170 cm/cm
$ 1734/MT
- Density: 1.67 g/cc
- Tensile Strength at Break: 234 MPa
- Elongation at Break: 1.50 %
- Tensile Modulus: 20.0 GPa
- Flexural Strength: 380 MPa
$ 1521/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Water Absorption: 0.0900 % @Temperature 22.8 °C
- Moisture Absorption: 0.190 %
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
$ 2181/MT
- Specific Gravity: 1.30 g/cc
- Density: 1.30 g/cc
- Water Absorption: 0.100 % @Temperature 22.8 °C
- Linear Mold Shrinkage, Flow: 0.0130 - 0.0150 cm/cm
- Linear Mold Shrinkage, Flow: 0.0130 - 0.0150 cm/cm
$ 2382/MT
- Specific Gravity: 1.63 g/cc
- Density: 1.64 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage, Flow: 0.00 cm/cm @Thickness 3.17 mm
- Linear Mold Shrinkage, Flow: 0.00 cm/cm @Thickness 2.00 mm
$ 1514/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 1.70 %
- Melt Flow: 12.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 62.0 MPa
- Elongation at Break: 30.0 %
$ 1527/MT
- Solids Content: 54.5 %
- Viscosity: 850 - 1600 cP
- Glass Transition Temp, Tg: 30.0 °C
- Colloid: PVOH
$ 1537/MT
- Density: 1.40 g/cc
- Water Absorption: 0.090 %
- Linear Mold Shrinkage, Flow: 0.0065 cm/cm
- Hardness, Rockwell M: 81
- Tensile Strength, Ultimate: 97.0 MPa
$ 1708/MT
- Specific Gravity: 1.21 g/cc
- Density: 1.21 g/cc
- Tensile Strength at Break: 96.0 MPa
- Tensile Strength at Break: 125 MPa
- Elongation at Break: 1.85 %
$ 2026/MT
- Density: 1.12 g/cc
- Tensile Strength at Break: 110 MPa
- Tensile Strength: 70.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.20 %
- Elongation at Break: 2.30 % @Temperature 80.0 °C
$ 2129/MT
- Density: 1.41 g/cc
- Melt Flow: 2.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 61.0 MPa
- Elongation at Yield: 11.0 %
- Tensile Modulus: 2.40 GPa
$ 1513/MT
- Density: 1.20 g/cc
- Water Absorption: 0.030 %
- Linear Mold Shrinkage: 0.0050 - 0.0080 cm/cm
- Tensile Strength, Ultimate: 20.0 MPa
- Elongation at Break: 0.80 %
$ 1447/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Moisture Absorption: 0.170 %
- Linear Mold Shrinkage, Flow: 0.00100 - 0.00700 cm/cm
- Linear Mold Shrinkage, Flow: 0.00500 - 0.00700 cm/cm
$ 2280/MT
- Tensile Strength at Break: 178 MPa
- Elongation at Break: 1.45 %
- Tensile Modulus: 16.64 GPa
- Flexural Strength: 285 MPa
- Flexural Modulus: 15.92 GPa
$ 1739/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.0170 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0160 cm/cm
- Tensile Strength, Yield: 52.0 MPa
- Elongation at Yield: 2.70 %
$ 2315/MT
- Solids Content: 55 %
- Particle Size: 300 µm
- pH: 5.0
- Viscosity: 700 - 1200 cP
- Glass Transition Temp, Tg: 19.0 °C
$ 1510/MT
- Density: 1.645 g/cc
- Linear Mold Shrinkage, Flow: 0.000 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00500 cm/cm
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 4.00 %
$ 1773/MT
- Density: 0.951 g/cc
- Vinyl Acetate Content: 33 %
- Melt Flow: 400 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 61
- Tensile Strength at Break: 2.10 MPa
$ 1996/MT
- Density: 0.932 g/cc
- Vinyl Acetate Content: 12 %
- Melt Flow: 0.80 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 95
- Hardness, Shore D: 43
$ 1786/MT
- Density: 1.22 g/cc
- Tensile Strength at Break: 220 MPa
- Elongation at Break: 1.66 %
- Tensile Modulus: 15.0 GPa
- Flexural Strength: 330 MPa
$ 1519/MT
- Density: 1.46 g/cc
- Moisture Absorption at Equilibrium: 0.16 %
- Linear Mold Shrinkage, Flow: 0.00 - 0.0050 cm/cm
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
$ 1518/MT
- Density: 1.31 g/cc
- Tensile Strength, Yield: 41.0 MPa
- Elongation at Break: 175 %
- Elongation at Yield: 16 %
- Tensile Modulus: 1.20 GPa
$ 1623/MT
- Vinyl Acetate Content: 33 %
- Melt Flow: 43 g/10 min
$ 1495/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Water Absorption: 0.0100 % @Temperature 22.8 °C
- Moisture Absorption: 0.100 %
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
$ 1463/MT
- Density: 1.72 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Tensile Strength, Ultimate: 140 MPa
- Elongation at Break: 1.4 %
$ 1992/MT
- Density: 0.940 g/cc
- Vinyl Acetate Content: 28 %
- Melt Flow: 850 g/10 min @Load 0.325 kg, Temperature 125 °C
- Hardness, Shore A: 67
- Tensile Strength at Break: 2.00 MPa
$ 2069/MT
- Density: 1.71 g/cc
- Moisture Absorption: 0.150 %
- Viscosity Test: 70.0 cm³/g
- Melt Flow: 5.00 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 165 MPa
$ 1884/MT
- Density: 1.34 g/cc
- Tensile Strength at Break: 45.0 MPa
- Elongation at Break: 14 %
- Tensile Modulus: 3.40 GPa
- Charpy Impact, Notched: 0.300 J/cm²
$ 2254/MT
- Density: 0.921 g/cc
- Thickness: 50.0 microns
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 12.0 MPa
- Film Tensile Strength at Yield, TD: 12.0 MPa
$ 2250/MT
- Specific Gravity: 0.820 g/cc
- Density: 0.00126 g/cc
- Particle Size: 0.00010 - 0.0010 µm
- Particle Mesh Size: 200 Mesh
- Molecular Weight: 30.03 g/mol
$ 1880/MT
- Density: 1.28 g/cc
- Water Absorption: 0.50 %
- Tensile Strength, Yield: 31.0 MPa
- Tensile Strength, Yield: 32.0 MPa
- Elongation at Break: 25 %
$ 1840/MT
- Density: 0.947 g/cc
- Vinyl Acetate Content: 28 %
- Melt Flow: 43 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 75
- Tensile Strength at Break: 10.0 MPa
$ 2560/MT
- Density: 1.39 g/cc
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0160 cm/cm
- Melt Flow: 20.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 56.0 MPa
$ 1497/MT
- Specific Gravity: 1.33 g/cc
- Density: 1.33 g/cc
- Tensile Strength at Break: 121 MPa
- Tensile Strength at Break: 148 MPa
- Elongation at Break: 1.40 %
$ 1639/MT
- Density: 1.42 g/cc
- Linear Mold Shrinkage, Flow: 0.00500 - 0.00700 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0100 - 0.0120 cm/cm
- Melt Flow: 6.90 g/10 min @Load 2.16 kg, Temperature 250 °C
- Hardness, Rockwell M: 83.0
$ 1740/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Tensile Strength, Yield: 64.0 MPa
- Flexural Modulus: 2.77 GPa
$ 2007/MT
- Density: 1.85 g/cc
- Density of Compound: 1.62 g/cc
- Tensile Strength at Break: 88.0 MPa
- Elongation at Break: 1.40 %
- Tensile Modulus: 15.8 GPa
$ 1760/MT
- Density: 1.12 g/cc
- Tensile Strength at Break: 90.0 MPa
- Elongation at Break: 2.25 %
- Tensile Modulus: 6.00 GPa
- Flexural Strength: 150 MPa
$ 1449/MT
- Density: 1.19 g/cc
- Water Absorption: 0.40 %
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Melt Flow: 7.0 - 11 g/10 min @Temperature 220 °C
- Hardness, Shore D: 55
$ 2293/MT
- Density: 1.51 g/cc
- Linear Mold Shrinkage, Flow: 0.00900 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0110 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 44.0 MPa
$ 1448/MT
- Specific Gravity: 0.820 g/cc
- Density: 0.00126 g/cc
- Particle Size: 0.00010 - 0.0010 µm
- Particle Mesh Size: 200 Mesh
- Molecular Weight: 30.03 g/mol
$ 1530/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.650 %
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 63.0 MPa
- Elongation at Break: 30.0 %
$ 2151/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0140 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 55.0 MPa
$ 1675/MT
- Density: 1.64 g/cc
- Linear Mold Shrinkage, Flow: 0.00 cm/cm @Thickness 2.00 mm
- Linear Mold Shrinkage, Transverse: 0.0065 cm/cm @Thickness 2.00 mm
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 5.0 %
$ 1549/MT
- Density: 1.72 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Tensile Strength, Ultimate: 140 MPa
- Elongation at Break: 1.4 %
$ 2282/MT
- Density: 1.77 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage, Flow: 0.00050 cm/cm @Thickness 2.00 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 2.00 mm
- Tensile Strength at Break: 125 MPa
$ 2367/MT
- Specific Gravity: 1.24 g/cc
- Density: 1.24 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm
- Tensile Strength at Break: 79.3 MPa
$ 2096/MT
- Solids Content: 55 %
- Viscosity: 1300 - 2300 cP
- Glass Transition Temp, Tg: 18.0 °C
- Colloid: PVOH
$ 1487/MT
- Density: 1.56 g/cc
- Tensile Strength at Break: 260 MPa
- Elongation at Break: 2.3 %
- Tensile Modulus: 16.6 GPa
- Melting Point: 240 °C
$ 1479/MT
- Density: 1.31 g/cc
- Water Absorption: 0.090 %
- Linear Mold Shrinkage, Flow: 0.019 cm/cm
- Hardness, Rockwell M: 75
- Tensile Strength, Yield: 60.0 MPa
$ 1557/MT
- Specific Gravity: 1.12 g/cc
- Density: 1.12 g/cc
- Tensile Strength at Break: 108 MPa
- Tensile Strength at Break: 130 MPa
- Tensile Strength at Break: 66.9 MPa @Temperature 93.3 °C
$ 1469/MT
- Density: 1.50 g/cc
- Linear Mold Shrinkage, Flow: 0.000 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00700 cm/cm
- Hardness, Rockwell M: 55.0
- Tensile Strength at Break: 156 MPa
$ 1720/MT
- Density: 1.65 g/cc
- Water Absorption at Saturation: 0.020 %
- Linear Mold Shrinkage: 0.0020 - 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm
- Hardness, Rockwell M: 100
$ 1944/MT
- Solids Content: 51.5 %
- Viscosity: 8000 - 12000 cP
- Glass Transition Temp, Tg: 41.0 °C
- Colloid: PVOH
$ 1461/MT
- Density: 1.34 g/cc
- Tensile Strength at Break: 145 MPa
- Tensile Strength: 85.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.00 %
- Elongation at Break: 2.20 % @Temperature 80.0 °C
$ 1475/MT
- Density: 1.65 g/cc
- Water Absorption at Saturation: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.00200 - 0.00600 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 - 0.00600 cm/cm
- Tensile Strength at Break: 195 MPa
$ 2017/MT
- Solids Content: 50 %
- Particle Size: 200 µm
- pH: 6.5
- Viscosity: 100 cP
- Glass Transition Temp, Tg: 30.0 °C
$ 2265/MT
- Melt Flow: 5.50 g/10 min @Load 2.16 kg, Temperature 220 °C
- Tensile Strength at Break: 26.0 MPa
- Elongation at Break: 480 %
- Flexural Strength: 4.20 MPa
- Flexural Modulus: 0.125 GPa
- Charpy Impact, Notched: 5.00 J/cm²
$ 1735/MT
- Density: 1.41 g/cc
- Melt Flow: 2.10 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 63.0 MPa
- Elongation at Yield: 10.0 %
- Tensile Modulus: 2.60 GPa
$ 1657/MT
- Specific Gravity: 1.43 g/cc
- Density: 1.43 g/cc
- Linear Mold Shrinkage, Flow: 0.000500 - 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00150 - 0.00250 cm/cm
- Tensile Strength at Break: 180 MPa
$ 1459/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.36 g/cc
- Linear Mold Shrinkage, Flow: 0.00100 - 0.00200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00300 - 0.00400 cm/cm
- Tensile Strength at Break: 170 MPa
$ 2300/MT
- Density: 1.09 g/cc
- Tensile Strength at Break: 105 MPa
- Elongation at Break: 2.3 %
- Tensile Modulus: 6.40 GPa
- Charpy Impact Unnotched: 5.00 J/cm²
$ 1944/MT
- Density: 1.01 g/cc
- Melt Flow: 22.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 65.0
- Hardness, Shore D: 19.0
- Tensile Strength at Break: 2.00 MPa
$ 1613/MT
- Density: 1.28 g/cc
- Tensile Strength at Break: 110 MPa
- Tensile Strength: 80.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.10 %
- Elongation at Break: 2.60 % @Temperature 80.0 °C
$ 1696/MT
- Density: 0.938 g/cc
- Vinyl Acetate Content: 18 %
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 92
- Hardness, Shore D: 36
$ 1838/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1579/MT
- Solids Content: 54 %
- Viscosity: 1000 - 2000 cP
- Glass Transition Temp, Tg: 30.0 °C
- Colloid: HEC
$ 1963/MT
- Density: 1.47 g/cc
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0160 cm/cm
- Melt Flow: 17.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 55.0 MPa
$ 1452/MT
- Density: 1.65 g/cc
- Water Absorption at Saturation: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.00200 - 0.00600 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 - 0.00600 cm/cm
- Hardness, Rockwell M: 100
$ 1956/MT
- Density: 1.42 g/cc
- Melt Density: 1.16 g/cc
- Water Absorption at Saturation: 0.75 %
- Linear Mold Shrinkage, Flow: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
$ 1625/MT
- Density: 1.41 g/cc
- Tensile Strength at Break: 47.0 MPa
- Elongation at Break: 1.21 %
- Tensile Modulus: 4.18 GPa
- Flexural Strength: 128 MPa
$ 1721/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.650 %
- Melt Flow: 12.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 64.0 MPa
- Elongation at Break: 25.0 %
$ 2057/MT
- Density: 1.39 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.65 %
- Melt Flow: 27.8 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 115 MPa
$ 2051/MT
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 2.50 %
- Tensile Modulus: 12.5 GPa
- Flexural Strength: 150 MPa
- Flexural Modulus: 13.2 GPa
$ 1633/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.018 - 0.020 cm/cm
- Linear Mold Shrinkage, Flow: 0.018 - 0.020 cm/cm
- Melt Flow: 35 g/10 min
$ 1478/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.53 g/cc
- Water Absorption: 0.0700 % @Temperature 22.8 °C
- Moisture Absorption: 0.200 %
- Viscosity Test: 74.0 cm³/g
$ 1454/MT
- Density: 1.50 g/cc
- Water Absorption at Saturation: 0.850 %
- Linear Mold Shrinkage, Flow: 0.00700 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0120 cm/cm
- Tensile Strength at Break: 75.0 MPa
$ 1865/MT
- Density: 1.03 g/cc
- Linear Mold Shrinkage, Flow: 0.00300 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 cm/cm
- Tensile Strength at Break: 89.0 MPa
- Elongation at Break: 2.40 %
$ 1488/MT
- Specific Gravity: 1.71 g/cc
- Density: 1.71 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage, Flow: 0.00050 cm/cm @Thickness 2.00 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 2.00 mm
$ 1459/MT
- Density: 0.937 g/cc
- Vinyl Acetate Content: 18 %
- Thickness: 75.0 microns
- Melt Flow: 1.6 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 5.00 MPa
$ 2226/MT
- Density: 1.65 g/cc
- Water Absorption at Saturation: 0.0200 %
- Tensile Strength at Break: 185 MPa
- Elongation at Break: 1.90 %
- Flexural Strength: 280 MPa
$ 2460/MT
- Vinyl Acetate Content: 9.0 %
- Melt Flow: 2.0 g/10 min
$ 1643/MT
- Density: 1.65 g/cc
- Tensile Strength, Ultimate: 180 MPa
- Elongation at Break: 2.6 %
- Tensile Modulus: 16.0 GPa
- Flexural Strength: 245 MPa
$ 1456/MT
- Tensile Strength at Break: 205 MPa
- Elongation at Break: 1.8 %
- Tensile Modulus: 13.6 GPa
- Charpy Impact Unnotched: 6.00 J/cm²
- Charpy Impact, Notched: 2.30 J/cm²
$ 1824/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 12.0 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 2115/MT
- Density: 0.949 g/cc
- Vinyl Acetate Content: 28 %
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 81
- Hardness, Shore D: 27
$ 1470/MT
- Density: 1.61 g/cc
- Linear Mold Shrinkage, Flow: 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00500 cm/cm
- Hardness, Rockwell M: 71.0
- Tensile Strength at Break: 150 MPa
$ 2503/MT
- Density: 1.57 g/cc
- Water Absorption at Saturation: 0.850 %
- Melt Flow: 4.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 3.00 %
$ 1587/MT
- Density: 1.48 g/cc
- Water Absorption at Saturation: 0.020 %
- Hardness, Rockwell M: 100
- Tensile Strength at Break: 120 MPa
- Elongation at Break: 1.5 %
$ 1536/MT
- Density: 1.39 g/cc
- Linear Mold Shrinkage, Flow: 0.019 cm/cm
- Linear Mold Shrinkage, Transverse: 0.016 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 56.0 MPa
$ 1810/MT
- Solids Content: 45 %
- pH: 4.0
- Viscosity: 150 cP
- Glass Transition Temp, Tg: -36.0 °C
- Crosslinking: Yes
$ 2154/MT
- Vinyl Acetate Content: 26 %
- Melt Flow: 6.0 g/10 min
$ 1506/MT
- Density: 1.62 g/cc
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 1.80 %
- Tensile Modulus: 13.0 GPa
- Flexural Modulus: 12.0 GPa
$ 1963/MT
- Density: 1.45 g/cc
- Tensile Strength at Break: 205 MPa
- Elongation at Break: 2.20 %
- Tensile Modulus: 12.5 GPa
- Flexural Strength: 325 MPa
$ 1496/MT
- Specific Gravity: 1.36 g/cc
- Density: 1.36 g/cc
- Tensile Strength at Break: 160 MPa
- Elongation at Break: 1.91 %
- Tensile Modulus: 9.50 GPa
$ 1877/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Water Absorption: 0.0900 % @Temperature 22.8 °C
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
$ 1462/MT
- Density: 1.12 g/cc
- Hardness, Shore D: 41
- Elongation at Break: >= 310 %
- 50% Modulus: 0.0140 GPa
- Flexural Strength: 3.00 MPa
$ 1742/MT
- Specific Gravity: 0.820 g/cc
- Density: 0.00126 g/cc
- Particle Size: 0.00010 - 0.0010 µm
- Particle Mesh Size: 200 Mesh
- Molecular Weight: 30.03 g/mol
$ 1553/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 12.0 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 2442/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage: 0.0020 - 0.0050 cm/cm
- Tensile Strength at Break: 67.6 MPa
- Tensile Strength at Break: 73.0 MPa
- Elongation at Break: 3.0 %
$ 1913/MT
- Density: 1.41 g/cc
- Water Absorption: 0.65 %
- Melt Flow: 24 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 64.0 MPa
- Elongation at Break: 17 %
$ 1739/MT
- Density: 1.26 g/cc
- Water Absorption at Saturation: 1.2 %
- Linear Mold Shrinkage, Flow: 0.017 cm/cm
- Linear Mold Shrinkage, Transverse: 0.016 cm/cm
- Tensile Strength, Yield: 33.0 MPa
$ 1689/MT
- Density: 1.52 g/cc
- Tensile Strength at Break: 175 MPa
- Flexural Modulus: 11.0 GPa
- Izod Impact, Notched (ISO): 60.0 kJ/m²
- Melting Point: 280 °C
- Deflection Temperature at 1.8 MPa (264 psi): 185 °C
$ 2011/MT
- Solids Content: 52 %
- pH: 4.5
- Viscosity: 100 cP
- Glass Transition Temp, Tg: 0.000 °C
- FDA: Yes
$ 1527/MT
- Density: 1.42 g/cc
- Linear Mold Shrinkage, Flow: 0.0220 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0190 cm/cm
- Melt Flow: 12.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 62.0 MPa
$ 1513/MT
- Specific Gravity: 1.31 g/cc
- Density: 1.31 g/cc
- Water Absorption: 0.110 % @Temperature 22.8 °C
- Moisture Absorption: 0.200 %
- Viscosity Test: 115 cm³/g
$ 1489/MT
- Density: 1.27 g/cc
- Tensile Strength at Break: 80.0 MPa
- Elongation at Break: 2.25 %
- Tensile Modulus: 6.80 GPa
- Flexural Strength: 136 MPa
$ 1541/MT
- Density: 1.34 g/cc
- Water Absorption at Saturation: 0.0200 %
- Viscosity: 430000 cP
- Hardness, Rockwell M: 93.0
- Tensile Strength at Break: 88.0 MPa
$ 1496/MT
- Specific Gravity: 1.62 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0050 cm/cm
- Tensile Strength at Break: 176 MPa
- Tensile Strength at Break: 59.3 MPa @Temperature 204 °C
$ 1911/MT
- Density: 1.37 g/cc
- Melt Flow: 7.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 51.0 MPa
- Elongation at Break: 35.0 %
- Elongation at Yield: 15.0 %
$ 2401/MT
- Density: 1.34 g/cc
- Tensile Strength at Break: 140 MPa
- Tensile Strength: 85.0 MPa @Temperature 80.0 °C
- Elongation at Break: 1.80 %
- Elongation at Break: 2.30 % @Temperature 80.0 °C
$ 1764/MT
- Specific Gravity: 1.76 g/cc
- Density: 1.75 g/cc
- Filler Content: 45 %
- Linear Mold Shrinkage, Flow: 0.00090 cm/cm @Thickness 2.00 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 2.00 mm
$ 1653/MT
- Vinyl Acetate Content: 12 %
- Melt Flow: 10 g/10 min
$ 2545/MT
- Specific Gravity: 1.69 g/cc
- Density: 1.69 g/cc
- Linear Mold Shrinkage, Flow: 0.000500 - 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00100 - 0.00200 cm/cm
- Tensile Strength at Break: 280 MPa
$ 1553/MT
- Solids Content: 48 %
- Viscosity: 200 - 600 cP
- Glass Transition Temp, Tg: -36.0 °C
- Colloid: Surfactant
$ 1891/MT
- Density: 1.43 g/cc
- Tensile Strength at Break: 135 MPa
- Tensile Strength: 80.0 MPa @Temperature 80.0 °C
- Elongation at Break: 1.80 %
- Elongation at Break: 2.00 % @Temperature 80.0 °C
$ 1468/MT
- Density: 1.73 g/cc
- Water Absorption: 0.10 %
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Tensile Strength, Ultimate: 42.0 MPa
- Elongation at Break: 0.25 %
$ 2268/MT
- Density: 1.40 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0165 cm/cm
- Melt Flow: 13.0 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 2084/MT
- Density: 1.59 g/cc
- Linear Mold Shrinkage, Flow: 0.00600 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00950 cm/cm
- Melt Flow: 4.80 g/10 min @Load 5.00 kg, Temperature 190 °C
- Tensile Strength at Break: 155 MPa
$ 2317/MT
- Tensile Strength at Break: 69.0 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 3.882 GPa
- Flexural Strength: 100.6 MPa
- Flexural Modulus: 3.775 GPa
$ 1744/MT
- Solids Content: 54 %
- Viscosity: 1000 - 1400 cP
- Glass Transition Temp, Tg: 30.0 °C
- Colloid: PVOH
$ 1455/MT
- Density: 1.07 g/cc
- Solids Content: >= 55 %
- pH: 6.5
- Viscosity: 125 cP
- Glass Transition Temp, Tg: 9.00 °C
$ 1587/MT
- Density: 1.12 g/cc
- Tensile Strength at Break: 120 MPa
- Tensile Strength: 80.0 MPa @Temperature 80.0 °C
- Elongation at Break: 2.50 %
- Elongation at Break: 2.30 % @Temperature 80.0 °C
$ 1901/MT
- Density: 1.54 g/cc
- Water Absorption: 0.050 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Hardness, Rockwell M: 93
- Tensile Strength, Ultimate: 135 MPa
$ 2339/MT
- Density: 1.81 g/cc
- Moisture Absorption: 0.00400 %
- Water Absorption at Saturation: 0.0110 %
- Linear Mold Shrinkage, Flow: 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00500 cm/cm
$ 1561/MT
- Tensile Strength at Break: 175 MPa
- Elongation at Break: 1.65 %
- Tensile Modulus: 14.5 GPa
- Flexural Strength: 265 MPa
- Flexural Modulus: 13.0 GPa
$ 1919/MT
- Density: 1.06 g/cc
- Linear Mold Shrinkage, Flow: 0.0120 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0120 cm/cm
- Melt Flow: 13.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 79.0
$ 1745/MT
- Density: 1.65 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Hardness, Rockwell M: 43
- Tensile Strength at Break: 150 MPa
$ 2447/MT
- Density: 1.21 g/cc
- Tensile Strength at Break: 147 MPa
- Elongation at Break: 2.40 %
- Tensile Modulus: 9.085 GPa
- Flexural Strength: 241 MPa
$ 1446/MT
- Density: 0.924 g/cc
- Vinyl Acetate Content: 9.0 %
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 94
- Hardness, Shore D: 46
$ 1601/MT
- Specific Gravity: 1.52 g/cc
- Density: 1.52 g/cc
- Water Absorption: 0.0500 % @Temperature 22.8 °C
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
$ 2038/MT
- Density: 1.40 g/cc
- Melt Flow: 9.50 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 61.0 MPa
- Elongation at Break: 28.0 %
- Elongation at Yield: 8.00 %
$ 1671/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Density of Compound: 1.20 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.750 %
$ 1455/MT
- Density: 1.09 g/cc
- Solids Content: >= 58 %
- pH: 4.8
- Viscosity: 2000 cP
- Glass Transition Temp, Tg: 20.0 °C
$ 2426/MT
- Density: 1.57 g/cc
- Filler Content: 20 %
- Tensile Strength at Break: 100 MPa
- Elongation at Break: 1.8 %
- Tensile Modulus: 8.00 GPa @Temperature 23.0 °C
$ 2450/MT
- Density: 1.38 g/cc
- Linear Mold Shrinkage, Flow: 0.0210 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0190 cm/cm
- Melt Flow: 32.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 53.0 MPa
$ 2041/MT
- Specific Gravity: 1.45 g/cc
- Density: 1.45 g/cc
- Moisture Absorption at Equilibrium: 0.10 %
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm
- Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm
$ 2001/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.00500 - 0.00700 cm/cm
- Linear Mold Shrinkage, Flow: 0.00500 - 0.00700 cm/cm
$ 1494/MT
- Density: 1.80 g/cc
- Water Absorption: 0.020 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
- Hardness, Rockwell M: 100
$ 2198/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.750 %
- Linear Mold Shrinkage, Flow: 0.0190 cm/cm
$ 2298/MT
- Solids Content: 51 %
- pH: 4.5
- Viscosity: 6000 cP
- Glass Transition Temp, Tg: 32.0 °C
- FDA: Yes
$ 1596/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1541/MT
- Density: 1.13 g/cc
- Viscosity Test: 119 cm³/g
- Linear Mold Shrinkage, Flow: 0.00220 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00350 cm/cm
- Tensile Strength at Break: 110 MPa
$ 2189/MT
- Density: 1.20 g/cc
- Melt Flow: 7.10 g/10 min @Load 2.16 kg, Temperature 250 °C
- Melt Flow: 15.0 g/10 min @Load 2.16 kg, Temperature 250 °C
- Hardness, Shore D: 40.0
- Tensile Strength at Break: 10.0 MPa
$ 2039/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.55 g/cc
- Moisture Absorption: 0.150 %
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00700 - 0.00900 cm/cm
$ 1817/MT
- Density: 1.47 g/cc
- Tensile Strength at Break: 220 MPa
- Elongation at Break: 0.850 %
- Tensile Modulus: 32.0 GPa
- Flexural Strength: 375 MPa
$ 1513/MT
- Specific Gravity: 1.25 g/cc
- Density: 1.25 g/cc
- Water Absorption: 0.100 % @Temperature 22.8 °C
- Linear Mold Shrinkage, Flow: 0.0170 - 0.0220 cm/cm
- Linear Mold Shrinkage, Flow: 0.0170 - 0.0220 cm/cm
$ 1742/MT
- Specific Gravity: 1.12 g/cc
- Density: 1.12 g/cc
- Tensile Strength at Break: 100 MPa
- Tensile Strength at Break: 108 MPa
- Tensile Strength at Break: 66.9 MPa @Temperature 93.3 °C
$ 1544/MT
- Density: 1.77 g/cc
- Linear Mold Shrinkage, Flow: 0.000 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00230 cm/cm
- Tensile Strength at Break: 130 MPa
- Elongation at Break: 1.70 %
$ 1847/MT
- Density: 1.84 g/cc
- Water Absorption: 0.040 %
- Moisture Absorption at Equilibrium: 0.040 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0030 cm/cm
$ 1473/MT
- Solids Content: 54.5 %
- Viscosity: 1800 - 2700 cP
- Glass Transition Temp, Tg: 11.0 °C
- Colloid: PVOH
$ 1901/MT
- Density: 1.22 g/cc
- Tensile Strength at Break: 125 MPa
- Tensile Strength: 80.0 MPa @Temperature 80.0 °C
- Elongation at Break: 1.80 %
- Elongation at Break: 2.00 % @Temperature 80.0 °C
$ 1632/MT
- Specific Gravity: 0.820 g/cc
- Density: 0.00126 g/cc
- Particle Size: 0.00010 - 0.0010 µm
- Particle Mesh Size: 200 Mesh
- Molecular Weight: 30.03 g/mol
$ 1588/MT
- Density: 1.45 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Thickness 2.00 mm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm @Thickness 2.00 mm
- Tensile Strength at Break: 120 MPa
$ 1824/MT
- Melt Flow: 8.5 g/10 min @Load 2.16 kg, Temperature 220 °C
- Tensile Strength at Break: 18.0 MPa
- Elongation at Break: 650 %
- Flexural Strength: 3.00 MPa
- Flexural Modulus: 0.0880 GPa
$ 2057/MT
- Solids Content: 55 %
- Viscosity: 3000 - 4100 cP
- Glass Transition Temp, Tg: 30.0 °C
- Colloid: PVOH
$ 1559/MT
- Density: 1.60 g/cc
- Linear Mold Shrinkage, Flow: 0.00 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0020 cm/cm
- Hardness, Rockwell M: 100
- Tensile Strength at Break: 205 MPa
$ 1473/MT
- Density: 1.33 g/cc
- Melt Flow: 13.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 41.0 MPa
- Elongation at Yield: 10.0 %
- Tensile Modulus: 1.90 GPa
$ 1643/MT
- Density: 1.79 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm
- Hardness, Rockwell M: 93
- Tensile Strength at Break: 160 MPa
$ 1685/MT
- Density: 1.34 g/cc
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
- Melt Flow: 21.0 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength, Yield: 56.0 MPa
- Elongation at Break: 19.0 %
$ 1602/MT
- Density: 1.76 g/cc
- Water Absorption: 0.020 %
- Moisture Absorption at Equilibrium: 0.020 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm
$ 1700/MT
- Density: 1.35 g/cc
- Water Absorption at Saturation: 0.020 %
- Tensile Strength at Break: 65.0 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 4.00 GPa
$ 1681/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.0220 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0220 cm/cm
- Melt Flow: 8.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 65.0 MPa
$ 1693/MT
- Density: 1.78 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Hardness, Rockwell M: 60
- Tensile Strength at Break: 100 MPa
$ 1631/MT
- Density: 1.50 g/cc
- Water Absorption: 0.020 %
- Moisture Absorption at Equilibrium: 0.020 %
- Linear Mold Shrinkage: 0.00 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0020 cm/cm
$ 2143/MT
- Density: 1.50 g/cc
- Water Absorption: 0.020 %
- Moisture Absorption at Equilibrium: 0.020 %
- Linear Mold Shrinkage: 0.00 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0020 cm/cm
$ 2531/MT
- Solids Content: 45 %
- Particle Size: 80 µm
- pH: 8.2
- Viscosity: <= 1500 cP
- Glass Transition Temp, Tg: 52.0 °C
$ 1477/MT
- Density: 1.40 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0185 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0175 cm/cm
- Melt Flow: 26.0 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1520/MT
- Specific Gravity: 1.65 g/cc
- Filler Content: 30 %
- Tensile Strength, Ultimate: 140 MPa @Temperature 23.0 °C
- Elongation at Break: 4.0 % @Temperature 23.0 °C
- Flexural Strength: 150 MPa
$ 1821/MT
- Solids Content: 54 %
- Viscosity: 1800 - 2600 cP
- Glass Transition Temp, Tg: 30.0 °C
- Colloid: PVOH
$ 1993/MT
- Solids Content: 55 %
- Particle Size: 225 µm
- pH: 5.0
- Viscosity: 100 - 650 cP
- Glass Transition Temp, Tg: 13.0 °C
$ 1989/MT
- Density: 1.41 g/cc
- Water Absorption at Saturation: 0.650 %
- Melt Flow: 12.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 65.0 MPa
- Elongation at Break: 25.0 %
$ 1545/MT
- Density: 1.50 g/cc
- Moisture Absorption: 0.00300 %
- Water Absorption at Saturation: 0.00600 %
- Linear Mold Shrinkage, Flow: 0.00100 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 cm/cm
$ 2493/MT
- Density: 1.41 g/cc
- Tensile Strength, Yield: 64.0 MPa
- Flexural Modulus: 2.52 GPa
- Izod Impact, Notched (ISO): 5.70 kJ/m²
- Deflection Temperature at 1.8 MPa (264 psi): 88.0 °C
$ 1464/MT
- Specific Gravity: 1.41 g/cc
- Density: 1.41 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.750 %
- Linear Mold Shrinkage, Flow: 0.0170 cm/cm
$ 1870/MT
- Density: 1.75 g/cc
- Linear Mold Shrinkage, Flow: 0.00100 - 0.00200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 - 0.00500 cm/cm
- Tensile Strength at Break: 140 MPa
- Elongation at Break: 1.60 %
$ 1490/MT
- Specific Gravity: 1.72 g/cc
- Density: 1.72 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0040 cm/cm
- Tensile Strength at Break: 150 MPa
$ 1613/MT
- Density: 1.58 g/cc
- Water Absorption at Saturation: 0.0200 %
- Tensile Strength at Break: 90.0 MPa
- Elongation at Break: 1.50 %
- Flexural Strength: 130 MPa
$ 1463/MT
- Specific Gravity: 1.40 g/cc
- Density: 1.35 g/cc
- Water Absorption: 0.010 % @Temperature 22.8 °C
- Water Absorption at Saturation: 0.020 %
- Linear Mold Shrinkage, Flow: 0.010 - 0.012 cm/cm
$ 1539/MT
- Density: 1.42 g/cc
- Melt Flow: 17.04 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 62.0 MPa
- Elongation at Break: 30 %
- Elongation at Yield: 11 %
$ 1850/MT
- Density: 1.44 g/cc
- Moisture Absorption at Equilibrium: 0.20 %
- Water Absorption at Saturation: 0.80 %
- Melt Flow: 25.92 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ball Indentation Hardness: 110 MPa
$ 1746/MT
- Density: 1.80 g/cc
- Filler Content: 40 %
- Tensile Strength at Break: 111 MPa
- Elongation at Break: 1.16 %
- Tensile Modulus: 0.111 GPa @Temperature 23.0 °C
$ 2482/MT
- Solids Content: 55 %
- Particle Size: 300 µm
- pH: 5.0
- Viscosity: 50 - 750 cP
- Glass Transition Temp, Tg: 26.0 °C
$ 1920/MT
- Solids Content: 54.5 %
- Viscosity: 3100 - 4400 cP
- Glass Transition Temp, Tg: 0.000 °C
- Colloid: PVOH
$ 1598/MT
- Density: 1.95 g/cc
- Water Absorption at Saturation: 0.020 %
- Tensile Strength at Break: 145 MPa
- Elongation at Break: 1.0 %
- Tensile Modulus: 21.5 GPa
$ 1705/MT
- Density: 1.62 g/cc
- Linear Mold Shrinkage, Flow: 0.00200 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 cm/cm
- Hardness, Rockwell M: 80.0
- Tensile Strength at Break: 160 MPa
$ 1562/MT
- Specific Gravity: 1.50 g/cc
- Density: 1.50 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm
$ 1809/MT
- Specific Gravity: 1.60 g/cc
- Density: 1.57 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.750 %
- Linear Mold Shrinkage, Flow: 0.0150 cm/cm
$ 2560/MT
- Specific Gravity: 1.40 g/cc
- Density: 1.35 g/cc
- Water Absorption at Saturation: 0.020 %
- Linear Mold Shrinkage, Flow: 0.012 - 0.015 cm/cm
- Linear Mold Shrinkage, Transverse: 0.015 - 0.018 cm/cm
$ 1827/MT
- Density: 1.65 g/cc
- Tensile Strength at Break: 160 MPa
- Flexural Modulus: 11.9 GPa
- Izod Impact, Notched (ISO): 27.0 kJ/m²
- Melting Point: 280 °C
- Deflection Temperature at 1.8 MPa (264 psi): 190 °C
$ 1736/MT
- Specific Gravity: 1.58 g/cc
- Density: 1.575 g/cc
- Moisture Absorption: 0.200 %
- Water Absorption at Saturation: 0.800 %
- Linear Mold Shrinkage, Flow: 0.00400 cm/cm
$ 1608/MT
- Specific Gravity: 1.31 g/cc
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
- Hardness, Rockwell M: 78.0
- Tensile Strength at Break: 55.8 MPa
- Tensile Strength, Yield: 57.2 MPa
$ 1521/MT
- Solids Content: 52 %
- pH: 3.5
- Viscosity: 100 cP
- Glass Transition Temp, Tg: 0.000 °C
- APE-Free: Yes
$ 1616/MT
- Density: 1.08 g/cc
- Solids Content: >= 56 %
- pH: 5.0
- Viscosity: 2300 cP
- Glass Transition Temp, Tg: 30.0 °C
$ 1919/MT
- Density: 1.65 g/cc
- Water Absorption: 0.020 %
- Moisture Absorption at Equilibrium: 0.020 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm
$ 1922/MT
- Density: 1.08 g/cc
- Solids Content: >= 49 %
- pH: 4.7
- Viscosity: 5500 cP
- Glass Transition Temp, Tg: 30.0 °C
$ 1872/MT
- Density: 1.40 g/cc
- Moisture Absorption: 0.0400 %
- Moisture Vapor Transmission: 0.0100 cc-mm/m²-24hr-atm @Temperature 38.0 °C
- Water Vapor Transmission: 0.0300 g/m²/day
- Oxygen Transmission: 0.03175 cc-mm/m²-24hr-atm
$ 1839/MT
- Specific Gravity: 1.35 g/cc
- Density: 1.35 g/cc
- Linear Mold Shrinkage, Flow: 0.0060 - 0.010 cm/cm
- Linear Mold Shrinkage, Flow: 0.0060 - 0.010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 - 0.014 cm/cm
$ 1888/MT
- Specific Gravity: 1.23 g/cc
- Density: 1.23 g/cc
- Water Absorption: 0.100 % @Temperature 22.8 °C
- Moisture Absorption: 0.200 %
- Linear Mold Shrinkage, Flow: 0.0180 cm/cm
$ 1508/MT
- Density: 1.95 g/cc
- Water Absorption at Saturation: 0.020 %
- Linear Mold Shrinkage: 0.0020 - 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0030 - 0.0070 cm/cm
- Tensile Strength at Break: 115 MPa
$ 1937/MT
- Density: 1.41 g/cc
- Melt Flow: 12 g/10 min
- Tensile Strength, Yield: 66.0 MPa
- Flexural Modulus: 2.65 GPa
- Izod Impact, Notched (ISO): 5.50 kJ/m²
$ 1452/MT
- Specific Gravity: 1.53 g/cc
- Density: 1.53 g/cc
- Moisture Absorption: 0.140 %
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
- Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
$ 2268/MT
- Density: 1.31 g/cc
- Density of Compound: 1.11 g/cc
- Moisture Absorption: 0.200 %
- Viscosity Test: 85.0 cm³/g
- Linear Mold Shrinkage, Flow: 0.0180 - 0.0200 cm/cm
$ 2150/MT
- Density: 0.949 g/cc
- Vinyl Acetate Content: 28 %
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore D: 27
- Tensile Strength at Break: 14.0 MPa
$ 1750/MT
- Density: 1.507 g/cc
- Tensile Strength at Break: 80.0 MPa
- Elongation at Break: 4.20 %
- Tensile Modulus: 6.00 GPa
- Flexural Strength: 140 MPa
$ 2018/MT
- Density: 1.507 g/cc
- Tensile Strength at Break: 80.0 MPa
- Elongation at Break: 4.20 %
- Tensile Modulus: 6.00 GPa
- Flexural Strength: 140 MPa
$ 1860/MT
- Density: 1.41 g/cc
- Density of Compound: 1.20 g/cc
- Water Absorption at Saturation: 0.650 %
- Linear Mold Shrinkage, Flow: 0.0210 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0180 cm/cm
$ 1598/MT
- Density: 1.65 g/cc
- Water Absorption at Saturation: 0.0200 %
- Linear Mold Shrinkage, Flow: 0.00200 - 0.00600 cm/cm
- Linear Mold Shrinkage, Transverse: 0.00400 - 0.00600 cm/cm
- Tensile Strength at Break: 195 MPa
$ 2481/MT
- Specific Gravity: 1.60 g/cc
- Density: 0.000948 g/cc
- Density: 1.64 g/cc
- Density: 1.65 g/cc
- Water Absorption: 0.0200 % @Temperature 22.8 °C
$ 2502/MT
- Density: 1.47 g/cc
- Density of Compound: 1.25 g/cc
- Water Absorption at Saturation: 0.800 %
- Melt Flow: 9.00 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 52.0 MPa
$ 2385/MT
- Specific Gravity: 1.35 g/cc
- Density: 0.000782 g/cc
- Density: 1.35 g/cc
- Density of Compound: 1.15 g/cc
- Water Absorption: 0.0300 % @Temperature 22.8 °C
$ 1926/MT
- Density: 1.51 g/cc
- Melt Flow: 17.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 48.0 MPa
- Elongation at Break: 15.0 %
- Elongation at Yield: 8.00 %
$ 1535/MT
- Solids Content: 50 %
- pH: 4.0
- Viscosity: 500 cP
- Glass Transition Temp, Tg: -10.0 °C
- APE-Free: Yes
$ 1611/MT
- Density: 1.12 g/cc
- Tensile Strength at Break: 95.0 MPa
- Elongation at Break: 2.3 %
- Tensile Modulus: 7.20 GPa
- Flexural Modulus: 7.00 GPa
Delivery Polymer Celanese Corporation
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):| Country | 20’ Container | 40’ Container | 5,000 MT |
|---|---|---|---|
| 🇦🇺 Australia | $3345 | $4181 | $401400 |
| 🇦🇹 Austria | $2825 | $3531 | $339000 |
| 🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
| 🇦🇱 Albania | $2500 | $3125 | $300000 |
| 🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
| 🇦🇴 Angola | $2762.5 | $3453 | $331500 |
| 🇦🇷 Argentina | $3230 | $4038 | $387600 |
| 🇦🇲 Armenia | $2625 | $3281 | $315000 |
| 🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
| 🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
| 🇧🇭 Bahrain | $3095 | $3869 | $371400 |
| 🇧🇾 Belarus | $2825 | $3531 | $339000 |
| 🇧🇿 Belize | $3155 | $3944 | $378600 |
| 🇧🇪 Belgium | $2575 | $3219 | $309000 |
| 🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
| 🇧🇴 Bolivia | $3230 | $4038 | $387600 |
| 🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
| 🇧🇷 Brazil | $3120 | $3900 | $374400 |
| 🇭🇺 Hungary | $2575 | $3219 | $309000 |
| 🇻🇪 Venezuela | $3230 | $4038 | $387600 |
| 🇻🇳 Vietnam | $2625 | $3281 | $315000 |
| 🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
| 🇬🇹 Guatemala | $3230 | $4038 | $387600 |
| 🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
| 🇩🇪 Germany | $2475 | $3094 | $297000 |
| 🇭🇳 Honduras | $3230 | $4038 | $387600 |
| 🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
| 🇬🇷 Greece | $2575 | $3219 | $309000 |
| 🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
| 🇩🇰 Denmark | $2400 | $3000 | $288000 |
| 🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
| 🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
| 🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
| 🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
| 🇮🇱 Israel | $2625 | $3281 | $315000 |
| 🇮🇳 India | $3712.5 | $4641 | $445500 |
| 🇮🇩 Indonesia | $3095 | $3869 | $371400 |
| 🇯🇴 Jordan | $2625 | $3281 | $315000 |
| 🇮🇶 Iraq | $2625 | $3281 | $315000 |
| 🇮🇷 Iran | $3095 | $3869 | $371400 |
| 🇮🇪 Ireland | $2500 | $3125 | $300000 |
| 🇮🇸 Iceland | $2575 | $3219 | $309000 |
| 🇪🇸 Spain | $2500 | $3125 | $300000 |
| 🇮🇹 Italy | $2400 | $3000 | $288000 |
| 🇾🇪 Yemen | $2625 | $3281 | $315000 |
| 🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
| 🇰🇭 Cambodia | $3095 | $3869 | $371400 |
| 🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
| 🇨🇦 Canada | $3230 | $4038 | $387600 |
| 🇶🇦 Qatar | $2625 | $3281 | $315000 |
| 🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
| 🇨🇾 Cyprus | $2625 | $3281 | $315000 |
| 🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
| 🇨🇳 China | $3712.5 | $4641 | $445500 |
| 🇨🇴 Colombia | $3230 | $4038 | $387600 |
| 🇰🇷 Korea South | $2625 | $3281 | $315000 |
| 🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
| 🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
| 🇨🇺 Cuba | $3230 | $4038 | $387600 |
| 🇰🇼 Kuwait | $2625 | $3281 | $315000 |
| 🇱🇻 Latvia | $2575 | $3219 | $309000 |
| 🇱🇧 Lebanon | $2625 | $3281 | $315000 |
| 🇱🇾 Libya | $2762.5 | $3453 | $331500 |
| 🇱🇹 Lithuania | $2500 | $3125 | $300000 |
| 🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
| 🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
| 🇲🇾 Malaysia | $2625 | $3281 | $315000 |
| 🇲🇹 Malta | $2500 | $3125 | $300000 |
| 🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
| 🇲🇽 Mexico | $3155 | $3944 | $378600 |
| 🇲🇩 Moldova | $2400 | $3000 | $288000 |
| 🇲🇨 Monaco | $2475 | $3094 | $297000 |
| 🇲🇳 Mongolia | $2625 | $3281 | $315000 |
| 🇲🇲 Myanmar | $2625 | $3281 | $315000 |
| 🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
| 🇳🇵 Nepal | $2625 | $3281 | $315000 |
| 🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
| 🇳🇱 Netherlands | $2575 | $3219 | $309000 |
| 🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
| 🇳🇿 New Zealand | $3345 | $4181 | $401400 |
| 🇳🇴 Norway | $2400 | $3000 | $288000 |
| 🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
| 🇴🇲 Oman | $2625 | $3281 | $315000 |
| 🇵🇰 Pakistan | $2625 | $3281 | $315000 |
| 🇵🇦 Panama | $3230 | $4038 | $387600 |
| 🇵🇾 Paraguay | $3155 | $3944 | $378600 |
| 🇵🇪 Peru | $3230 | $4038 | $387600 |
| 🇵🇱 Poland | $2575 | $3219 | $309000 |
| 🇵🇹 Portugal | $2500 | $3125 | $300000 |
| 🇷🇺 Russia | $2575 | $3219 | $309000 |
| 🇷🇴 Romania | $2475 | $3094 | $297000 |
| 🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
| 🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
| 🇷🇸 Serbia | $2575 | $3219 | $309000 |
| 🇸🇬 Singapore | $3095 | $3869 | $371400 |
| 🇸🇾 Syria | $3095 | $3869 | $371400 |
| 🇸🇰 Slovakia | $2500 | $3125 | $300000 |
| 🇸🇮 Slovenia | $2500 | $3125 | $300000 |
| 🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
| 🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
| 🇺🇸 United States | $2902.5 | $3628 | $348300 |
| 🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
| 🇹🇭 Thailand | $2625 | $3281 | $315000 |
| 🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
| 🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
| 🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
| 🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
| 🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
| 🇹🇷 Turkey | $2625 | $3281 | $315000 |
| 🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
| 🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
| 🇺🇦 Ukraine | $2500 | $3125 | $300000 |
| 🇺🇾 Uruguay | $2675 | $3344 | $321000 |
| 🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
| 🇵🇭 Philippines | $2625 | $3281 | $315000 |
| 🇫🇮 Finland | $2500 | $3125 | $300000 |
| 🇫🇷 France | $2575 | $3219 | $309000 |
| 🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
| 🇲🇪 Montenegro | $2575 | $3219 | $309000 |
| 🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
| 🇨🇱 Chile | $3355 | $4194 | $402600 |
| 🇨🇭 Switzerland | $2575 | $3219 | $309000 |
| 🇸🇪 Sweden | $2500 | $3125 | $300000 |
| 🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
| 🇪🇨 Ecuador | $3155 | $3944 | $378600 |
| 🇦🇸 American Samoa | $3345 | $4181 | $401400 |
| 🇸🇻 El Salvador | $3230 | $4038 | $387600 |
| 🇪🇪 Estonia | $2575 | $3219 | $309000 |
| 🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
| 🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
| 🇯🇵 Japan | $3095 | $3869 | $371400 |
| 🇦🇩 Andorra | $2500 | $3125 | $300000 |
| 🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
| 🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
| 🇧🇧 Barbados | $3230 | $4038 | $387600 |
| 🇧🇹 Bhutan | $3095 | $3869 | $371400 |
| 🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
| 🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
| 🇧🇳 Brunei | $2625 | $3281 | $315000 |
| 🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
| 🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
| 🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
| 🇹🇩 Chad | $2762.5 | $3453 | $331500 |
| 🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
| 🇧🇯 Benin | $2762.5 | $3453 | $331500 |
| 🇩🇲 Dominica | $3230 | $4038 | $387600 |
| 🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
| 🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
| 🇫🇯 Fiji | $3345 | $4181 | $401400 |
| 🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
| 🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
| 🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
| 🇰🇮 Kiribati | $3345 | $4181 | $401400 |
| 🇬🇩 Grenada | $3355 | $4194 | $402600 |
| 🇬🇺 Guam | $3345 | $4181 | $401400 |
| 🇬🇾 Guyana | $3230 | $4038 | $387600 |
| 🇭🇹 Haiti | $3120 | $3900 | $374400 |
| 🇯🇲 Jamaica | $3230 | $4038 | $387600 |
| 🇰🇵 Korea, North | $2625 | $3281 | $315000 |
| 🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
| 🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
| 🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
| 🇲🇻 Maldives | $2625 | $3281 | $315000 |
| 🇲🇱 Mali | $2762.5 | $3453 | $331500 |
| 🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
| 🇨🇼 Curaçao | $3230 | $4038 | $387600 |
| 🇦🇼 Aruba | $3120 | $3900 | $374400 |
| 🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
| 🇳🇪 Niger | $2762.5 | $3453 | $331500 |
| 🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
| 🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
| 🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
| 🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
| 🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
| 🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
| 🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
| 🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
| 🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
| 🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
| 🇸🇲 San Marino | $2500 | $3125 | $300000 |
| 🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
| 🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
| 🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
| 🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
| 🇸🇷 Suriname | $3230 | $4038 | $387600 |
| 🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
| 🇹🇬 Togo | $2762.5 | $3453 | $331500 |
| 🇹🇴 Tonga | $3345 | $4181 | $401400 |
| 🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
| 🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
| 🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, lng ships for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.
